SX8-DBLPLUSTire Pressure Testing Transmitter

TECH300plus USER GUIDE BARTEC USA BARTEC USA, LLC44231 Phoenix DriveSterling Heights, MI 48314(866)407-TPMS toll free(586)685-1300 voice(586)323-3801 fax TIRE PRESSURE MONITORING SYSTEM DIAGNOSTIC and RESET TOOL Tech300plus User Guide 5/1/07 24FAQs- Resolution Tech300plus User Guide 5/1/07 1 TABLE OF CONTENTS Important Notices 02 Part Names and Functions 03 Power On and Off Sequence 04 Main Area Display 05 Menu System 08 Reading a TPM Sensor 13 PC Connection Capabilities 16 Installing Program Software to the PC 19 Installing the Drivers to the PC 20 Updating the 21211 23 FAQ’s and Troubleshooting 24 Tech300plus User Guide 5/1/07 2IMPORTANT NOTICESCopyrightThe contents of this manual may not be reproduced o r distributed by any means electronically, mechanically, recording or other wise unless written authorization is given from Bartec USA, LLC. DisclaimerAll specifications, illustrations and information contai ned within this manual are based on the most current information available at the time of publication. Bartec USA, LLC reserves the right to makes changes at any time without obligation to notify any person or org anization. Bartec USA, LLC will do its best to keep you the customer infor med of any changes that might affect the tools performance. Warning: Changes or modifications not expressively approved b y the party responsible for compliance could void the use r's authority to operate the equipment. The term “IC:” before the ra dio certification number only signifies that Industry Canada technica l specifications were met. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 o f the FCC Rules. These limits are designed to provide reasonable protectio n against harmful interference when the equipment is operated in a co mmercial environment. This equipment generates, uses, and ca n radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a re sidential area is likely to cause harmful interference in which case the use r will be required to correct the interference at their expense. FCC Compliance Model: Tech300plus FCC ID: SX8-DBLPLUS IC: 5736A-DBLPLUS This device complies with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the follow ing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Tech300plus User Guide 5/1/07 23 2.3) Updating the TECH300plus TPMS Tool Once the installation of the software and drivers i s complete, you are ready to update the tool. To obtain the most recent copy of firmware for your TECH300plus tool, visit www.bartecusa.com/ to retrieve the file. Just as with the loader program, left click the fir mware file and save to your desktop. 1. Launch the Programming Software on the PC. 2. Follow the connection instructions- ensuring a g ood battery is installed. 3. Click “Load Update Button” and browse the folder where the 21211 software is stored – on your DESKTOP. 4. Click “Update Tool Button.” – Wait for the program to prompt you to disconnect the tool. The tool is now ready to use. Tech300plus User Guide 5/1/07 22 Tech300plus User Guide 5/1/07 3 PART NAMES AND FUNCTIONS Once the wizard completes, the following screen is presented. Click on ‘finish.’ Launch the Wheelrite program. Th e program will have an image of the TECH300plus. 1 Note that if any other pc usb port is to be used in the future, it is good practice to repeat the connection of the TECH3 00plus to other USB ports. Only when this process has been completed is the pr ogram and hardware fully integrated in the PC Functional Description DisplayTest Button ESC / Directional Left Button USB Port Alternate ON / Directional Up Button Enter / Directional Right Button ON / Directional Down Button 324 21 567 36547 Tech300plus User Guide 5/1/07 4 Tech300plus User Guide 5/1/07 21 POWER ON/OFF SEQUENCE Select the “INSTALL FROM A LIST OR SPECIFIC LOCATIO N (advanced)” button. The TECH300plus can be powered ON by pressing the ON Button (Arrow Down) or the Alternate ON (Arrow Up) Button. Click NEXT. Click the BROWSE button and point to the Bartec fol der located in the program files. The unit boots up with a Splash Screen that indicates the current version of software. When the unit powers up it will load all of the Data it previously saved (see below). Powering the TECH300plus Off can be achieved in two ways: 1. The TECH300plus will automatically power off afte r 30 seconds of inactivity. 2. Selecting the “Off” command from the Main Menu. When the unit is powered off, it will save all of its TPM Data, the last TPM Type that was read and the last selected Item with in the Select by Make Menu. MAIN DISPLAY AREA Current Menu Page Menu Item Indicator Current Item Battery Indicator Selected TPM Test Indicator USB Indicator Data Available Indicator 1 8765 432 134 567 2 8 The OK button should now be lit. Click OK to comple te the installation Bartec Tech300plus User Guide 5/1/07 20 Tech300plus User Guide 5/1/07 5 MAIN DISPLAY AREA Click run if this warning pops up Follow the wizard’s instructions to install the pro gram to your PC or Laptop. Use the default destination folder Bartec to prevent confusion later. The drivers for the tool will be stored in this folder located in program files. 2.2) Installing the Drivers to your PC After installing the Bartec loader program, you must ins tall the drivers for the tool. Plug the provided USB cable into your PC. While holding the enter button on the TECH300plus TPMS Tool, plug in the sm all end of the USB cable into the tool. The NEW HARDWARE WIZARD should now launch. Current Menu Page This indicates what menu page the user is currently in. Menu pages contain a number of items in which actions can be …

Text truncated - open the document above for the full version.

            !"#$" % & ' ()   * '     )  !$+,-  '' ().  /&0*,- !+*-&    
1&   $2*,-(   0*,-(        34.(

Re: Certification for Bartec Transceiver FCC ID: SX8-DBLPLUS IC: 5736A-DBLPLUS REQUEST FOR CONFIDENTIALITY Pursuant to 47 CRF 0.457(d) and 0.459, Bartec requests that a part of the subject application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent (1) ID Label & Location Short Term Permanent (3) External Photos Short Term Permanent (4) Block Diagram Short Term Permanent (5) Schematics Short Term Permanent (7) Test Setup Photos Short Term Permanent (8) User’s Manual Short Term Permanent (9) Internal Photos Short Term Permanent (10) Parts List & Placement Short Term Permanent (11) RF Exposure Short Term Permanent (12) Description of Operation Bartec has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: Bartec requests the exhibits listed above as permanently confidential be permanently withheld from public review. Short-Term Confidentiality: Bartec requests the exhibits selected above as short term confidential be withheld from public view for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding this request, please contact me at the above address or call 734-483-4211, fax 734-647-2106 or e-mail [email protected]. Sincerely, Valdis V. Liepa, Research Scientist University of Michigan April 12, 2007 Re: Certification for Bartec Transceiver Model/PN(s): TECH 300 PLUS FCC ID: SX8-DBLPLUS IC: 5736A-DBLPLUS STATEMENT OF MODIFICATIONS There were no modifications made to the DUT by this test laboratory. (Also see Section 3.1 of the attached Test Report). _____________________ Valdis V. Liepa Research Scientist Re: Certification for Bartec Transceiver Model/PN(s): TECH 300 PLUS FCC ID: SX8-DBLPLUS IC: 5736A-DBLPLUS GENERAL PRODUCT INFORMATION The device, for which certification is pursued, has been designed by: Bartec USA LLC 44231 Phoenix Drive Sterling Heights, MI 48314 Contact: Scot Holloway [email protected] Tel: 586-685-1300 Fax: 586-323-3801 It will be manufactured by: Bartec USA LLC 44231 Phoenix Drive Sterling Heights, MI 48314 Contact: Scot Holloway [email protected] Tel: 586-685-1300 Fax: 586-323-3801 Canadian Contact: Prema Canada, ULC 10 Bond St N. Dundas, ON L9H 3A9 Contact: Dave Lottridge [email protected] Tel: 905-628-2303 Fax:905-628-3646 Re: Certification for Bartec Transceiver Model/PN(s): TECH 300 PLUS FCC ID: SX8-DBLPLUS IC: 5736A-DBLPLUS POWER OF ATTORNEY A letter granting Valdis V. Liepa the Power of Attorney is on file and can be provided when so requested.

BartecUSA,LLC44231PhoenixDriveSterlingHeights,MI48314 TollFree(866)407(TPMSFax(586)323(3801 IDLABELSAMPLE    Model,umber TECH300PLUS  Complieswith IndustryCanadaRSS(210Issue5 IC:5736A(DBLPLUS    Warrantyvoid,ifunitisopened.  Technicalassistance 1(866(407(TPMS(8767)  BartecUSA MadeinChina FCCID:SX8(DBLPLUS ThisdevicecomplieswithPart15oftheFCCRulesand RSS(210ofIndustryCanada.Operationissubjectto thefollowingtwoconditions:(1)thisdevicemaynot causeharmfulinterference,and(2)thisdevicemust acceptanyinterferencereceived,includinginterference thatmaycauseundesiredoperation.  Label Location

  

 

 



 









 
 


     
 

 
 
  

!"
 
# $
%&&
'()
!**+
( ,!
-.$
%&&
'()
!**+
/!+&

01
2 2
3
4
5
  


 
05

05
 2 

6
  





     - 
7$8 "%8922
 8# 2 2
2  
 
/((
: 
!2
4
5
  
 2
5 

" $
# 2 2 ;<  
3
 
# 2
/((
: $


*
! 
=
*((
*

 
# 
2 
6 9 
 2 6 

2 2
92  
9

 
# 2
/((
: 
>



9
6 2
 

9 >
  


  


9
-


 
 
# 
9 

  
 

29    
   
# 
2
6
 

2?2 
> 

6 2
 
'  
  )

 
 
#
2
 
# 
: 
3 
'#:3)
 

9

 
9
 


  9


 

 
>  
9

  2 6
@A
6 
# 

  
2 


B-
 
2
> 
 
  

  
   
2

  
  
2


  2

 
#


#:3
> 

  
2

2
   

#:3

92


 

B-
 
2 
# 

2  
6
  
9

!* CD
 
6

 
99  
#:3
 
 99  
!* CD
  
 

!* CD

99  
#:3

 99  
B-
  
C 2

 





2  

 2

2 2


 2

2 2
 2
  
# 

 9  

 2
 

 
#
 


 



  ;
 


 E
 2 
  
5
0
 92
 >
> 
9

 
9 
#:3
 
6


  

F 
 2E


 
 
#



6 


<"
  
#


>  

6
  

> 
6 
5
 
 2 
'

2 )

  
 

;>
 
#
 
 
  

2 

  
>

 
 
#
2
 
22 

2 

  


 
 
5
6DD 
29 
B-
 
 2 
'2 2 )

> 


6 
 2 

#:3
9  
 2
5 

" $
# 2 2 ;<  
3
 
# 2
/((
: $


/
! 
=
*((
/


 
! 
  
  
9


2 2 
*
 
9
  
 
2 
9

 22 


    
9

#:3


 

>
> 
 
 


 
!* CD
  


#:3

6
 
'
 2



> 2



 2 )
 
 

 

 
> 

  
' 
2 )


>
> 


99
  

 
6
9

9 . 
  
9

&
 2

2 


 

 
'6? 2

  
> 

> 
6
  

 

9 2 )
#
2 2
  
9
 
6 
6 

?

 
9

C
6 
 
 
 

 

>
> 
 
#
 
9

!* CD

 
2 
2  


 59 
   
9

#:3


> 

 
9

#:3
  



9
#:3
 
2 
6
53

-3

 

/! ((3CD

&//! 3CD
5
 2  
' 


 

B-
2 2

 2 )

6 


 
9 G 2


 2 
 
9 


2 
9
  
0
 2 
9
 
 

>
> 
!* CD
   

2  
0
 2 
9
 
 
  
2 

   
 
9

#:3

  


2 
5

2 
 
6
 2 2 
9

9  
 

 G  


> 
  2 
> 
>

2 

92  

    59 

 
 
9

 
>  

#:3E
B-
 
2
2
6
>  
 
2 2 


:
0


  

 6
9
  
 
#
 
9


. 
 D
9
!*,6 

University of Michigan Radiation Laboratory FCC Part 15, IC RSS210/Gen  Test Report %o. 415031364
Page
1
of
12



The
University
of
Michigan
Radiation
Laboratory
3228
EECS
Building
Ann
Arbor,
MI
48109(2122
Tel:
(734)
764(0500


Measured
Radio
Frequency
Emissions
From

BartecUSALLCTransceiver TransmitterReport FCCID:SX8DBLPLUS Model/P"(s):TECH300PLUS 
Report
No.
415031(364
April
12,
2007


Copyright
©
2007


For:
44231
Phoenix
Drive
Sterling
Heights,
MI
48314

Contact:
Scot
Holloway
[email protected]
Tel:
586(685(1300
Fax:
586(323(3801




Tests
supervised
by:
Measurements
made
by:
Valdis
V.
Liepa
Report
approved
by:


_____________________



Valdis
V.
Liepa
Test
Report
written
by:

Joseph
D
Brunett

Research
Scientist

Summary

Tests
for
compliance
with
FCC
Regulations,
Part
15,
Subpart
C,
and
for
compliance
with
Industry
Canada
RSS(210/Gen,
were
performed
on
Bartec
USA
LLC
Transceiver,
model/PN(s)
TECH
300
PLUS.

This
device
is
subject
to
Rules
and
Regulations
as
a
Low
Power
Transmitter.

In
testing
completed
April
10,
2007,
the
device
tested
in
the
worst
case
met
the
allowed
specifications
for
transmitter
radiated
emissions
by
22.1
dB
(see
p.
7);
digital
emissions,
Class
A
were
met
by
at
least
11.2
dB.
Conducted
emissions
tests
do
not
apply,
since
the
device
is
powered
from
a
9
VDC
battery.
University of Michigan Radiation Laboratory FCC Part 15, IC RSS210/Gen  Test Report %o. 415031364
Page
2
of
12

1.Introduction Bartec
USA
LLC
model/PN(s)
TECH
300
PLUS
was(were)
tested
for
compliance
with
FCC
Regulations,
Part
15,
adopted
under
Docket
87(389,
April
18,
1989,
and
with
Industry
Canada
RSS(210/Gen,
Issue
6,
September
2005.

The
tests
were
performed
at
the
University
of
Michigan
Radiation
Laboratory
Willow
Run
Test
Range
following
the
procedures
described
in
ANSI
C63.4(2003
"Methods
of
Measurement
of
Radio(Noise
Emissions
from
Low(Voltage
Electrical
and
Electronic
Equipment
in
the
Range
of
9
kHz
to
40
GHz".

The
Site
description
and
attenuation
characteristics
of
the
Open
Site
facility
are
on
file
with
FCC
Laboratory,
Columbia,
Maryland
(FCC
Reg.
No:
91050)
and
with
Industry
Canada,
Ottawa,
ON
(File
Ref.
No:
IC
2057).
 2.TestProceduresandEquipmentUsed
The
pertinent
test
equipment
commonly
used
in
our
facility
for
measurements
is
listed
in
Table
2.1
below.

The
middle
column
identifies
the
specific
equipment
used
in
these
tests.

Table2.1TestEquipment. TestInstrumentEqpt.UsedManufacturer/Model Spectrum
Analyzer
(0.1(1500
MHz)


Hewlett(Packard,
182T/8558B
Spectrum
Analyzer
(9kHz(22GHz)

X
Hewlett(Packard
8593A
SN:
3107A01358
Spectrum
Analyzer
(9kHz(26GHz)

X
Hewlett(Packard
8593E,
SN:
3412A01131
Spectrum
Analyzer
(9kHz(26GHz)

Hewlett(Packard
8563E,
SN:
3310A01174
Spectrum
Analyzer
(9kHz(40GHz)

Hewlett(Packard
8564E,
SN:
3745A01031
Power
Meter

Hewlett(Packard,
432A
Power
Meter

Anritsu,
ML4803A/MP
Harmonic
Mixer
(26(40
GHz)

Hewlett(Packard
11970A,
SN:
3003A08327
Harmonic
Mixer
(40(60
GHz)

Hewlett(Packard
11970U,
SN:
2332A00500
Harmonic
Mixer
(75(110
GHz)

Hewlett(Packard
11970W,
SN:
2521A00179
Harmonic
Mixer
(140(220
GHz)

Pacific
Millimeter
Prod.,
GMA,
SN:
26
S(Band
Std.
Gain
Horn


S/A,
Model
SGH(2.6
C(Band
Std.
Gain
Horn


University
of
Michigan,
NRL
design
XN(Band
Std.
Gain
Horn


University
of
Michigan,
NRL
design
X(Band
Std.
Gain
Horn


S/A,
Model
12(8.2
X(band
horn
(8.2(
12.4
GHz)

Narda
640
X(band
horn
(8.2(
12.4
GHz)

Scientific

Atlanta
,
12(8.2,
SN:
730
K(band
horn
(18(26.5
GHz)

FXR,
Inc.,
K638KF
Ka(band
horn
(26.5(40
GHz)

FXR,
Inc.,
U638A
U(band
horn
(40(60
GHz)

Custom
Microwave,
HO19
W(band
horn(75(110
GHz)

Custom
Microwave,
HO10
G(band
horn
(140(220
GHz)

Custom
Microwave,
HO5R
Bicone
Antenna
(30(250
MHz)
X
University
of
Michigan,
RLBC(1

Bicone
Antenna
(200(1000
MHz)
X
University
of
Michigan,
RLBC(2
Dipole
Antenna
Set
(30(1000
MHz)

X
University
of
Michigan,
RLDP(1,(2,(3
Dipole
Antenna
Set
(30(1000
MHz)


EMCO
2131C,
SN:
992
Active
Rod
Antenna
(30
Hz(50
MHz)

EMCO
3301B,
SN:
3223
Active
Loop
Antenna
(30
Hz(50
MHz)
X
EMCO
6502,
SN:2855
Ridge(horn
Antenna
(300(5000
MHz)
X
University
of
Michigan

Amplifier
(5(1000
MHz)
X
Avantek,
A11(1,
A25(1S
Amplifier
(5(4500
MHz)
X
Avantek
Amplifier
(4.5(13
GHz)

Avantek,
AFT(12665
Amplifier
(6(16
GHz)

Trek
Amplifier
(16(26
GHz)

Avantek
LISN
Box

University
of
Michigan
Signal
Generator

Hewlett(Packard
8657B

University of Michigan Radiation Laboratory FCC Part 15, IC RSS210/Gen  Test Report %o. 415031364
Page
3
of
12
3.DeviceUnderTest

3.1Identification The
DUT
is
a
Transceiver
consisting
of
a
125
kHz
Transmitter,
and
315
MHz
receiver,
and
a
433.92
MHz
receiver.
This
report
details
only
the
LF
transmitter
emissions
from
the
device.

The
associated
receiver
report
outlines
the
receiver
and
digital
emissions
from
the
DUT.
The
device
is
designed
to
actuate
and
read
automobile
Tire
Pressure
Monitoring
Sensors
(TPMS).
The
DUT
is
powered
from
an
automotive
9
VDC
source
and
is
housed
in
a
plastic
case
approximately
6
by
1
by
2.75
inches,
LF
coils
are
internal.

For
digital
emissions
testing,
the
manufacturer’s
supplied
USB
cable
with
Ferrite
was
provided.

The
DUT
was
designed
and
manufactured
by
Bartec
USA
LLC,
44231
Phoenix
Drive,
Sterling
Heights,
MI
48314.

It
is
identified
as:

Bartec
USA
LLC
Transceiver

Model/PN(s):
TECH
300
PLUS

FCC
ID:
SX8(DBLPLUS

IC:
5736A(DBLPLUS

3.2Variants There
is
only
a
single
model
of
the
DUT.
 3.3ModesofOperation Six
modes
of
operation
can
be
selected
by
the
user
on
this
device.
All
six
modes
were
tested,
and
the
worst
case
emissions
are
reported
herein.
The
CW
mode
was
determined
to
have
the
highest
fundamental
and
harmonic
emissions,
and
is
fully
reported.


3.4EMIRelevantModifications No
EMI
Relevant
Mo…

Text truncated - open the document above for the full version.