SXO-7600603Blueprint Robotics Controller

Sphero Blueprint Robotics Swerve Drive Robot Teachers or parents please read: Important safety information, keep this sheet for reference. Do Not Discard. Device Legal Guide: Go to www.sphero.com/manuals. The explanations provided in this guide are for information purposes only and may be modified. The latest version of this guide can be found at www.sphero.com/manuals. Not all Sphero devices are compatible with one another. WARNING Choking Hazard - Small parts. DO NOT allow children under 3 years old to play with or near this product. CAUTION Keep away from long hair. ELECTRICAL AND ELECTRONIC EQUIPMENT AND BATTERIES Always remove batteries from the product when it is not being used for a long period of time. Please power off when not in use. Batteries or battery packs must be removed for recycling and proper disposal. When this product has reached the end of its useful life, it should not be disposed of with other household waste. EU legislation for Electrical and Electronic Equipment and Batteries, requires these to be separately collected so that they can be treated using the best available recovery and recycling techniques. This will minimize the impact on the environment and human health from soil and water contamination by any hazardous substances, decrease the resources required to make new products and avoid using up landfill space. Please do your part by keeping this product out of the municipal waste stream! The “wheelie bin” symbol means that it should be collected as “waste electrical and electronic equipment”. You can return an old product to your retailer when you buy a similar new one. For other options, please contact your local council. ● Never charge the battery unattended. ● Charge battery in an isolated area. Keep away from flammable materials. ● Do not expose to direct sunlight. There is a risk of the batteries exploding, overheating, or igniting. ● Do not disassemble, modify, heat, or short circuit the batteries. Do not place them in fires or leave them in hot places. ● Do not drop or subject to strong impacts. ● Do not allow the batteries to get wet. ● Only charge the batteries with the charger supplied. ● Only use the batteries in the device specified. ● Carefully read the instruction guide and use the batteries correctly. ● In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher for the battery. ● Batteries must be recycled or disposed of properly. ● DO NOT incinerate used batteries. ● DO NOT dispose of batteries in fire, as batteries may explode or leak. SAFETY AND HANDLING See “Important Safety and Handling Information” in the Device User Manual. User Manual can be found at www.sphero.com/manuals. To avoid injury or harm, please read all safety information and operating instructions before using the device. To reduce the risk of damage or injury, do not attempt to open the device. CARE Routinely inspect this product. If any parts are damaged or broken, discontinue use. SERVICE AND SUPPORT Do not attempt to service this device yourself; please refer all non-routine servicing questions to Sphero. For support, contact Sphero online at support.sphero.com or by email at [email protected] SPHERO ONE YEAR LIMITED WARRANTY SUMMARY This device, as supplied and distributed by Sphero and delivered new in the original carton to the original purchaser, is warranted by Sphero against defects in materials and workmanship for a period of one (1) year. See “Warranty” in the Device User Manual for full terms. SOFTWARE Your device can connect with proprietary software developed and copyrighted by Sphero to control its operation. Portions of this software may contain copyrighted elements licensed under the GPL, MIT, and Creative Commons licenses, among others. Additionally, your device contains proprietary firmware developed and copyrighted by Sphero. © 2026 Sphero, Inc. All rights reserved. SPHERO, the Sphero logo, the Sphero Edu logo, SPHERO BLUEPRINT and the Sphero Blueprint logo are registered trademarks of Sphero, Inc. BLUEPRINT ROBOTICS, the Blueprint Robotics logo, BLUEPRINT SWERVE, and the Blueprint Swerve logo are trademarks of Sphero, Inc. Other trademarks and trade names are properties of their respective owners. Patents pending. See www.sphero.com/patents for patent information. For more information about Sphero, visit us at www.sphero.com. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. REGULATORY This device complies with CE and IEC requirements. See “Regulatory” in the Device User Manual for more details. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which t…

Text truncated - open the document above for the full version.

UNIT ED STATES DESIGNATED AGENT LETTER Dat e: 06/11/2026 TO : Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Sphero HK Limited Company Name: Sphero, Inc. FRN: 0021247127 FRN: 0021247127 Grantee Code: SXO Contact Name: Angel Ma Contact Name Edith NG Address: Unit 4307-08, Level 43, Tower 1 Metroplaza, 223 Hing Fong Road, Kwai Fong, N.T., Hong Kong Address: 3216 Parkside Ct, Caddo Mills, TX 75135, United States City/Province/Zi p: Hong Kong City/Province/Zip: TX 75135, United States Telephone: 303-502-9466 Telephone: 303-502-9466 Fax: 720-729-0109 Fax: 303-923-8495 Email: [email protected] Email: [email protected] App licable Equipment: FCC ID: SXO-7600603 AT TN: Director of Certification: We, < Sphero HK Limited > and < Sphero, Inc. > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the phys ical U.S. address and e-mail of the designated agent listed above. We, < Sphero HK Limited > and < Sphero, Inc. > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commis sion-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Angel Ma Name (Printed): Edith NG Title: Director of Manufacturing Title: Product Compliance Specialist Signature: Signature:

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Sphero HK Limited Address Unit 4307-08, Level 43, Tower 1 Metroplaza, 223 Hing Fong Road, Kwai Fong, N.T., Hong Kong FRN 0021247127 Grantee Code SXO FCC ID: SXO-7600603 Authorized Contact Name Angel Ma Contact Phone 303-502-9466 Contact Email [email protected] Sphero HK Limited (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 06/11/2026 Print Name: Angel Ma Title: Director of Manufacturing *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Sphero HK Limited Address Unit 4307-08, Level 43, Tower 1 Metroplaza, 223 Hing Fong Road, Kwai Fong, N.T., Hong Kong FRN 0021247127 Grantee Code SXO FCC ID: SXO-7600603 Authorized Contact Name Angel Ma Contact Phone 303-502-9466 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 06/11/2026 Print Name: Angel Ma Title: Director of Manufacturing *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Sphero HK Limited Date: 06/11/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SXO-7600603 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Sphero HK Limited This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Angel Ma Title: Director of Manufacturing Signature: On behalf of Company: Sphero HK Limited Telephone: 303-502-9466 E-mail: [email protected]

Sphero HK Limited D ate: 06/11/2026 T O: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 R egarding: Confidentiality Request regarding application for FCC ID: SXO-7600603 L ONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune Up Procedure T he documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. S HORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. E xternal Photos Internal Photos Test Setup Photos User manual(s) S incerely, Print Name: Angel Ma Title: Director of Manufacturing Signature: On behalf of Company: Sphero HK Limited Telephone: 303-502-9466 E-mail: [email protected]

BUPITRBOTC  OTOLR  6-0630|CFv2  72.026 Pr aeAtraktP#C N C N R L E 0603 x xx Scale 1:1 Rvsio itr: 0.32  M 1cetd 0.42  p
ae
peoDclAt 0.22  d
ed rn o n
i­aos 0€.02  aeil&Dc o p
ae‚ 0€.52  p
ae
E TIƒf/„otmVe… d
ed 0€.62  p
ae
†lecPr E TIƒf 0‡.22  a­trˆ etU‰dts 1.32  E T 1.62  aeil&Dc o p
ae‚ 0.1Š0.206|Cnrlrv‚ „atrˆ E TIƒf p
ae+L/ 3Dc 0.72‹  E TIƒf p
ae‚ Cna­tŒ Ži tgl  jmsi‘all’s‰hr.­o GahcMrs&Clor Gahc :1 •P olGe   p  f1 INPUT: DC 5V 500mA Sphero™ YYDDDFF Model No: 760-0603-000 Made in China IC: 10016A-7600603 FCC ID: SXO-7600603 Sphero™ YYDDDFF Model No: 760-0603-000 Made in China IC: 10016A-7600603 FCC ID: SXO-7600603 Sphero™ YYDDDFF Model No (controller): 760-0603-000 Model No (battery): 760-0603-050 IC: 10016A-7600603 FCC ID: SXO-7600603 Made in China Sphero™ YYDDDFF Model No (controller): 760-0603-000 Model No (battery): 760-0603-050 IC: 10016A-7600603 FCC ID: SXO-7600603 Made in China

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02-A02 Rev. A/0 Report No.: FYCR260600011702 Page: 1 of 2 Appendix A Detailed System Check Results 1. System Performance Check System Performance Check 2450 MHz Head Date: 2026/6/22 Test Laboratory: SGS-SAR Lab Sys tem Perfor man ce Check 2450MHz Head Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 2450 MHz; σ = 1.747 S/m; ε r = 39.772; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7821; ConvF(7.4, 7.4, 7.4); Calibrated: 2025/10/14 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2026/3/2 Phantom: SAM 3; Type: SAM Twin; Serial: 2031 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 18.6 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 79.41 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 24.6 W/kg SAR(1 g) = 12.7 W/kg; SAR(10 g) = 6.13 W/kg Smallest distance from peaks to all points 3 dB below = 8.5 mm Ratio of SAR at M2 to SAR at M1 = 53.3% Maximum value of SAR (measured) = 20.2 W/kg 0 dB = 20.2 W/kg = 13.05 dBW/kg - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02-A02 Rev. A/0 Report No.: FYCR260600011702 Page: 1 of 2 Appendix B Detailed Test Results BT for Body Date: 2026/6/22 Test Laboratory: SGS-SAR Lab Bluetoot h BLE 1M 0CH Top side 0m m Communication System: UID 0, BLE (0); Frequency: 2402 MHz;Duty Cycle: 1:1.586 Medium: HSL;Medium parameters used: f = 2402 MHz; σ = 1.692 S/m; ε r = 39.852; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7821; ConvF(7.4, 7.4, 7.4); Calibrated: 2025/10/14 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2026/3/2 Phantom: SAM 3; Type: SAM Twin; Serial: 2031 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (11x15x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0211 W/kg Configuration/Scan/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.452 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.0290 W/kg SAR(1 g) = 0.014 W/kg; SAR(10 g) = 0.008 W/kg Smallest distance from peaks to all points 3 dB below = 6.1 mm Ratio of SAR at M2 to SAR at M1 = 50% Maximum value of SAR (measured) = 0.0215 W/kg 0 dB = 0.0215 W/kg = -16.68 dBW/kg - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02-A02 Rev. A/0 Report No.: FYCR260600011702 Page: 1 of 34 Appendix C Calibration certificate 1. Dipole D2450V2-SN955 2. DAE DAE4-SN 1267 3. Probe EX3DV4-SN 7821 4. dipole extend

SEM060-14_D2450V2-SN955(2025-06-18) Head Liquid Frequence(MHz) Date of Measurement Return Loss(dB) Δ % Impedance real（Ω） ΔΩ Impedance imaginary （jΩ） ΔjΩ 2450 2025/6/18 -26.5 / 52.6 / 4.09 / 2026/6/15 -25.88 -2.34% 51.8 -0.8 4.28 0.19 - End of Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02 Rev. A/1 Report No.: FYCR260600011702 Page: 1 of 34 SAR TEST REPORT Application No.: FYCR2606000117AT Applicant: Sphero HK Limited Address of Applicant: Unit 4307-08, Level 43, Tower 1 Metroplaza, 223 Hing Fong Road, Kwai Fong, N.T., Hong Kong Manufacturer: Sphero, Inc. Address of Manufacturer: 3216 Parkside Ct, Caddo Mills, TX 75135 USA EUT Description: Blueprint Robotics Controller Model No.: 760-0603-000 FCC ID: SXO-7600603 Standards: FCC 47CFR §2.1093 Date of Receipt: 2026-06-12 Date of Test: 2026-06-22 Date of Issue: 2026-06-23 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02 Rev. A/1 Report No.: FYCR260600011702 Page: 2 of 34 Revision Record Version Description Date Remark 01 2026-06-23 Original Authorized for issue by: Leo Li / Project Engineer Tree Zhan / Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02 Rev. A/1 Report No.: FYCR260600011702 Page: 3 of 34 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Body BT <0.10 SAR Limited(W/kg) 1.6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02 Rev. A/1 Report No.: FYCR260600011702 Page: 4 of 34 Contents 1 General Information ..................................................................................................... 6 1.1 General Description of EUT .................................................................................... 6 1.2 Test Specification ..................................................................................................... 7 1.3 RF exposure limits ................................................................................................... 8 1.4 Test Location ............................................................................................................ 9 1.5 Test Engineer ........................................................................................................... 9 1.6 Test Facility ............................................................................................................... 9 2 Laboratory Environment ........................................................................................... 10 3 SAR Measurements System Configuration ........................................................... 11 3.1 The SAR Measurement System ........................................................................... 11 3.2 Isotropic E-field Probe EX3DV4............................................................................ 13 3.3 Data Acquisition Electronics (DAE) ...................................................................... 14 3.4 SAM Twin Phantom ............................................................................................... 14 3.5 ELI Phantom ........................................................................................................... 15 3.6 Device Holder for Transmitters ............................................................................. 16 3.7 Measurement Procedure ....................................................................................... 17 3.7.1 Scanning procedure ........................................................................................ 17 3.7.2 Data storage .................................................................................................... 19 3.7.3 Data Evaluation by SEMCAD ......................................................................... 19 4 SAR measurement variability and uncertainty ..................................................... 21 4.1 SAR measurement variability................................................................................ 21 4.2 SAR measurement uncertainty ............................................................................. 21 5 Description of Test Position ..................................................................................... 22 5.1 Generic device........................................................................................................ 22 6 SAR System Verification Procedure ....................................................................... 23 6.1 Tissue Simulate Liquid .......................................................................................... 23 6.1.1 Recipes for Tissue Simulate Liquid ............................................................... 23 6.1.2 Measurement for Tissue Simulate Liquid ...................................................... 24 6.2 SAR System Check ............................................................................................... 25 6.2.1 Justification for Extended SAR Dipole Calibrations ..................................... 26 6.2.2 Summary System Check Result(s) ................................................................ 27 6.2.3 Detailed System Check Results ..................................................................... 27 7 Test Configuration ...................................................................................................... 28 7.1 Operation Configurations ...................................................................................... 28 7.1.1 BT Test Configuration ..................................................................................... 28 8 Test Result ................................................................................................................... 29 8.1 DUT Antenna Locations (Back View) ................................................................... 29 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-02 Rev. A/1 Report No.: FYCR260600011702 Page: 5 of 34 8.2 Measurement of RF Conducted Power................................................................ 30 8.2.1 RF Conducted Power Data of BT ...................…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2511000221AT01 Rev.:01 Page: 1 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 ANTENNA PASSIVE TEST REPORT Application No.SZOA2511000221AT ApplicantSphero, Inc. ManufacturerSphero, Inc. Product NameController Model No.760-0603 StandardsANSI/IEEE Std 149-2021. Date Initial Sample(s) ReceivedDec. 01, 2025 Testing Start DateDec. 01, 2025 Testing Finish DateDec. 04, 2025 Report Issue DateDec. 16, 2025 *In the configuration tested, the EUT detailed in this report complied with the standards specified above. Prepared by: Yuanyu Luo/ Test Engineer Approved by: Ervin Li/ Technical Manager ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2511000221ATT01 Rev.:01 Page:2 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 Revision History RevisionIssue DateDescription 01Dec. 16, 2025Initial creation of report ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2511000221ATT01 Rev.:01 Page:3 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 TABLE OF CONTENTS 1GENERAL INFORMATION....................................................................................................4 1.1Testing Laboratory..............................................................................................................................4 1.2Details of Applicant.............................................................................................................................4 1.3Details of Manufacturer......................................................................................................................4 1.4General Description of EUT..................................................................................................................5 1.5Test Procedure....................................................................................................................................5 1.6Test Specification................................................................................................................................6 1.7Laboratory Environment......................................................................................................................6 2OTA MEASUREMENTS SYSTEM CONFIGURATION......................................................7 2.1Test Configuration...............................................................................................................................7 3TEST EQUIPMENT LIST.......................................................................................................8 4MEASUREMENT UNCERTAINTY.......................................................................................9 5TEST RESULTS.....................................................................................................................10 6PATTERN PLOTS.................................................................................................................12 6.1Return Loss........................................................................................................................................12 6.2VSWR................................................................................................................................................13 6.3Stimulus............................................................................................................................................14 72-D ANTENNA PATTERN(THETA=90°).......................................................................15 83-D ANTENNA PATTERN..................................................................................................16 9THE EUT AND TEST CONFIGURATION.........................................................................17 ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2511000221ATT01 Rev.:01 Page:4 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 1General Information 1.1Testing Laboratory Test Lab SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Address No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China …

Text truncated - open the document above for the full version.