SZV-PTM211CPushbutton

USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 1/17 Patent protected: US 6,747,573 US 7,019,241 Further patents pending Pushbutton Transmitter Device PTM 210 / 210C October 18, 2011 USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 2/17 PTM 210 / 210C STEP EA REVISION HISTORY The following major modifications and improvements have been made to the first version of this document: No Major Changes 0.95 New EEP naming included (EEP 2.1) Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany www.enocean.com, [email protected], phone ++49 (89) 6734 6890 © EnOcean GmbH All Rights Reserved Important! This information describes the type of component and shall not be considered as assured characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifica- tions, refer to the EnOcean website: http://www.enocean.com. As far as patents or other rights of third parties are concerned, liability is only assumed for modules, not for the described applications, processes and circuits. EnOcean does not assume responsibility for use of modules described and limits its liability to the replacement of modules determined to be defective due to workmanship. Devices or systems containing RF components must meet the essential requirements of the local legal authorities. The modules must not be used in any relation with equipment that supports, directly or indirectly, human health or life or with applications that can result in danger for people, animals or real value. Components of the modules are considered and should be disposed of as hazardous waste. Local government regulations are to be observed. Packing: Please use the recycling operators known to you. By agreement we will take pack- ing material back if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or that we are not obliged to accept, we shall have to in- voice you for any costs incurred. USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 3/17 PTM 210 / 210C STEP EA TABLE OF CONTENT 1 GENERAL DESCRIPTION .................................................................................... 4 1.1 Basic Functionality ........................................................................................... 4 1.2 Typical Applications .......................................................................................... 5 1.3 Technical Data ................................................................................................. 5 1.4 Mechanical Interface ......................................................................................... 5 1.5 Environmental Conditions ................................................................................ 10 1.6 Ordering Information ...................................................................................... 10 2 FUNCTIONAL DESCRIPTION ............................................................................. 10 2.1 Block Diagram ............................................................................................... 10 2.2 Contact Nipples Designation ............................................................................ 11 2.3 Transmission timing ....................................................................................... 12 3 APPLICATIONS INFORMATION ......................................................................... 13 3.1 Laying the antenna (PTM 210C only) ................................................................ 13 3.2 Construction of application specific Switch Rockers ............................................. 14 3.3 Device Mounting ............................................................................................ 14 3.4 Transmission Range ....................................................................................... 15 4 AGENCY APPROVALS ...................................................................................... 16 4.1 CE Approval (PTM 210 only) ............................................................................ 16 4.2 FCC/IC Approval (PTM 210C only) .................................................................... 16 4.3 Japanese Type Approval (PTM 210C only) ......................................................... 17 USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 4/17 PTM 210 / 210C STEP EA 1 GENERAL DESCRIPTION The radio transmitter device PTM 210 / PTM 210C from EnOcean enables the implementa- tion of wireless remote controls without batteries. Power is provided by a built-in electro- dynamic power generator. The PTM 210 / PTM 210C device serves the 868 MHz / 315 MHz air interface protocol of EnOcean. Electro-dynamic powered radio transmitter device PTM 210 1.1 Basic Functionality A common electro-dynamic energy transducer is actuated by a bow (1), which can be pushed from outside the device by an appropriate push button or switch rocker. When the energy bow is pushed down, electrical energy is created and an RF telegram is transmitted including a 32-bit device ID. Releasing the energy bow generates different telegram …

Text truncated - open the document above for the full version.

ANNEX C:EXTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page1 of6 112808_fr.JPG: PTM210 C, front view ANNEX C:EXTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page2 of6 112808_re.JPG: PTM210 C, rear view ANNEX C:EXTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page3 of6 112808_le.JPG: PTM210 C, lefthand side view ANNEX C:EXTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page4 of6 112808_re.JPG: PTM210 C, righthand side view ANNEX C:EXTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page5 of6 112808_tp.JPG: PTM210 C, top view ANNEX C:EXTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page6 of6 112808_bo.JPG: PTM210 C, bottom view

ID Label and Label Location PTM210C Fig. 1: ID Label Fig. 2: Label Location on Module

ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page1 of7 112808_3.JPG: PTM210 C, internal (top) view ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page2 of7 112808_4.JPG: PTM210 C, internal (buttom) view, unmodified sample ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page3 of7 112808_11.JPG: PTM210 C, internal (buttom) view, modified sample ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page4 of7 112808_5.JPG: PTM210 C, internal view ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page5 of7 112808_12.JPG: PTM210 C, internal view, modified sample ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page6 of7 112808_6.JPG: PTM210 C, PCB, top view ANNEX B:INTERNAL PHOTOS OF THE EUT Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page7 of7 112808_10.JPG: PTM210 C, PCB, bottom view

USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 1/17 Patent protected: US 6,747,573 US 7,019,241 Further patents pending Pushbutton Transmitter Device PTM 210 / 210C October 18, 2011 USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 2/17 PTM 210 / 210C STEP EA REVISION HISTORY The following major modifications and improvements have been made to the first version of this document: No Major Changes 0.95 New EEP naming included (EEP 2.1) Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany www.enocean.com, [email protected], phone ++49 (89) 6734 6890 © EnOcean GmbH All Rights Reserved Important! This information describes the type of component and shall not be considered as assured characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifica- tions, refer to the EnOcean website: http://www.enocean.com. As far as patents or other rights of third parties are concerned, liability is only assumed for modules, not for the described applications, processes and circuits. EnOcean does not assume responsibility for use of modules described and limits its liability to the replacement of modules determined to be defective due to workmanship. Devices or systems containing RF components must meet the essential requirements of the local legal authorities. The modules must not be used in any relation with equipment that supports, directly or indirectly, human health or life or with applications that can result in danger for people, animals or real value. Components of the modules are considered and should be disposed of as hazardous waste. Local government regulations are to be observed. Packing: Please use the recycling operators known to you. By agreement we will take pack- ing material back if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or that we are not obliged to accept, we shall have to in- voice you for any costs incurred. USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 3/17 PTM 210 / 210C STEP EA TABLE OF CONTENT 1 GENERAL DESCRIPTION .................................................................................... 4 1.1 Basic Functionality ........................................................................................... 4 1.2 Typical Applications .......................................................................................... 5 1.3 Technical Data ................................................................................................. 5 1.4 Mechanical Interface ......................................................................................... 5 1.5 Environmental Conditions ................................................................................ 10 1.6 Ordering Information ...................................................................................... 10 2 FUNCTIONAL DESCRIPTION ............................................................................. 10 2.1 Block Diagram ............................................................................................... 10 2.2 Contact Nipples Designation ............................................................................ 11 2.3 Transmission timing ....................................................................................... 12 3 APPLICATIONS INFORMATION ......................................................................... 13 3.1 Laying the antenna (PTM 210C only) ................................................................ 13 3.2 Construction of application specific Switch Rockers ............................................. 14 3.3 Device Mounting ............................................................................................ 14 3.4 Transmission Range ....................................................................................... 15 4 AGENCY APPROVALS ...................................................................................... 16 4.1 CE Approval (PTM 210 only) ............................................................................ 16 4.2 FCC/IC Approval (PTM 210C only) .................................................................... 16 4.3 Japanese Type Approval (PTM 210C only) ......................................................... 17 USER MANUAL V0.9 EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Subject to modifications PTM 210 / 210C step EA User Manual V0.9 October 18, 2011 4:33 PM Page 4/17 PTM 210 / 210C STEP EA 1 GENERAL DESCRIPTION The radio transmitter device PTM 210 / PTM 210C from EnOcean enables the implementa- tion of wireless remote controls without batteries. Power is provided by a built-in electro- dynamic power generator. The PTM 210 / PTM 210C device serves the 868 MHz / 315 MHz air interface protocol of EnOcean. Electro-dynamic powered radio transmitter device PTM 210 1.1 Basic Functionality A common electro-dynamic energy transducer is actuated by a bow (1), which can be pushed from outside the device by an appropriate push button or switch rocker. When the energy bow is pushed down, electrical energy is created and an RF telegram is transmitted including a 32-bit device ID. Releasing the energy bow generates different telegram …

Text truncated - open the document above for the full version.

Königswinkel 10 32825 Blomberg Germany Phone:+49 (0) 52 35 95 00-0 Fax:+49 (0) 52 35 95 00-10 Test Report Report Number: F112808E1 Applicant: EnOcean GmbH Manufacturer: EnOcean GmbH Equipment under Test (EUT): PTM210 C Laboratory (CAB) accredited by Deutsche Gesellschaft für Akkreditierung mbH in compliance with DIN ENISO/IEC 17025 under the Reg. No. DGA-PL-105/99-22, FCC Test site registration number 90877and Industry Canada Test site registration IC3469A-1 Test engineer:Thomas KÜHNReport Number:F112808E1 Date of issue:04 October 2011Order Number:11-112808page2 of32 REFERENCES [1]ANSI C63.4-2009American National Standard for Methods of Measuring of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. [2]FCC CFR 47 Part 15 (August 2011)Radio Frequency Devices [3]RSS-210 Issue 8 (December 2010)Licence-exempt Radio Apparatus(All Frequency Bands): Category IEquipment [4]RSS-GenIssue 3 (December 2010)General Requirements and Information for the Certification of Radio Apparatus [6]Publication Number 913591 (March 2007)Measurement of radiated emissions at the edge of the band for a Part 15 RF Device TEST RESULT The requirements of the tests performed as shown in the overview (clause4) werefulfilled by the equipment under test. The complete test results are presented in the following. RESERVATION T h i s t e s t r e p o r t i s o n l y v a l i d i n i t s o r i g i n a l f o r m . Any reproduction of its contents in extracts without written permission of the accredited test laboratory PHOENIX TESTLAB GmbH is prohibited. The test results herein refer only to the tested sample. PHOENIX TESTLAB GmbH is not responsible for any generalizations or conclusions drawn from these test results concerning further samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report. Each page necessarily contains the PHOENIX TESTLAB Logo and the TEST REPORT NUMBER. Test engineer: Thomas KÜHN04 October 2011 NameSignatureDate Authorized reviewer: Bernd STEINER04 October 2011 Name Signature Date Test engineer:Thomas KÜHNReport Number:F112808E1 Date of issue:04 October 2011Order Number:11-112808page3 of32 Contents:Page 1IDENTIFICATION...................................................................................................................4 1.1Applicant............................................................................................................................4 1.2Manufacturer.....................................................................................................................4 1.3Test laboratory...................................................................................................................4 1.4EUT (Equipment Under Test)............................................................................................5 1.5Technical data of equipment..............................................................................................5 1.6Dates................................................................................................................................. 6 2OPERATIONAL STATES.......................................................................................................6 3ADDITIONAL INFORMATION................................................................................................7 4OVERVIEW............................................................................................................................7 5TEST RESULTS ....................................................................................................................8 5.1Calculation of the measurement results.............................................................................8 5.220 dB bandwidth..............................................................................................................10 5.2.1Method of measurement (20 dB bandwidth)...........................................................10 5.2.2Test results (20 dB bandwidth)...............................................................................11 5.3Band-edge compliance....................................................................................................12 5.3.1Method of measurement (Band-edge compliance (radiated))................................. 12 5.3.2Test results(Band-edge compliance (radiated)).....................................................13 5.4Transmission time control................................................................................................15 5.4.1Method of measurement (transmission time control)...............................................15 5.4.2Test results (transmission time control)................................................................... 16 5.5Radiated emissions.........................................................................................................17 5.5.1Method of measurement (Radiated emissions).......................................................17 5.5.2Test results (radiated emissions)............................................................................24 5.5.2.1Preliminary radiated emission measurement......................................................24 5.5.2.2Final radiated emission measurement (30 MHz to 1 GHz)................................. 28 5.5.2.3Final radiated emission measurement (1 GHz to 4 GHz)....................................30 6TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS..............................................31 7REPORT HISTORY.............................................................................................................31 8LIST OF ANNEXES..............................................................................................................32 Test engineer:Thomas KÜHNReport Number:F112808E1 Date of issue:04 October 2011Order Number:11-112808page4 of32 1IDENTIFICATION 1.1Applicant Name:EnOcean GmbH Address: Kolpingring …

Text truncated - open the document above for the full version.

ANNEX A: TEST SETUP PHOTOS Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page1 of5 112808_b.JPG: PTM210 C, test setup fully anechoic chamber ANNEX A: TEST SETUP PHOTOS Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page2 of5 112808_d.JPG: PTM210 C, test setup fully anechoic chamber ANNEX A: TEST SETUP PHOTOS Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page3 of5 112808_a.JPG: PTM210 C, test setup fully anechoic chamber ANNEX A: TEST SETUP PHOTOS Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page4 of5 112808_c.JPG: PTM210 C, test setup fully anechoic chamber ANNEX A: TEST SETUP PHOTOS Examiner:Thomas KÜHNTest Report No.:F112808E1 Date of issue:04 October 2011Order No.:11-112808page5 of5 112808_j.JPG: PTM210 C, test setup open area test site