T4K-AT-505CB Radio

A1.250117 www.anytone.net Qixiang Electron Science & Technology Co., Ltd CB RADIO AT-505MINI Instruction Manual 1 1. ACCESSORIES MicrophoneMobile Bracket Spare Fuses 3A 250V non-slip mat Microphone Hanger Adjusting screws PadsTapping screws User Manual 2 2. KNOW ABOUT THIS RADIO 1 2 Position Switch : CB and PA 2 Microphone Plug 3 Emergency Channel ~ Menu 4 Channel Down Selector ~ Scan On ~ VOX On/Off 5 Channel Up Selector ~ Scan On ~ VOX On/Off 6 Power On/Off ~ Volume Control 7 Squelch Control 8 External Optional Speaker Jack 9 Antenna Jack Microphone cable PTT Connector 1 2 345 7 8 9 6 3 3. LCD AM mode selectedIndicates transmission PA mode selectedVOX function activated Indicates the active channel ROGER BEEP function activated TX or RX bargarph 4 4. HOW TO USE THIS RADIO 4.1 Power On/Off the Radio ................................................................. 4.4 Channel Selector ~ SCAN ............................................................. 4.2 Volume Control ............................................................................... Turn the VOL knob clockwise to power on the radio, the LCD displays the Norms and then displays channel number. Turn the VOL knob anti-clockwise, until hear Ka Ta, the radio is powered off. Short press / keys to change channels by one step. Hold / keys can fast changed channels. Turn the SQL knob clockwise to the exact point where all background noises disappear. This adjustment should be done with precision as, if set to maximum (fully clockwise), only the strongest signals will be received. Turn the VOL knob clockwise to increase the volume, turn it anti-clockwise to decrease the volume. 4.3 Manual Squelch Control ..................................................................... ※Channel Selector Press and hold / keys for 7 seconds or until a beep sounds activate the 40 channels scan function. The scanning stops as soon as there is a busy channel and the channel number flashes. In scanning mode, press / keys to change scan direction. Press PTT switch to exit channels scan. ※Channels Scan (very long press) Toggle the CB/PA switch to modify the modulation mode or . Corresponding mode is appears on the LCD. 4.6 CB ~ PA ............................................................................................ 4.5 VOX .................................................................................................... Press simultaneously the and keys on the unit in order to activate the VOX function, " " is appears on the LCD. A new press on these keys disables the function, " " disappears form the LCD. 5 ※Emergency Channels (short press) ※MENU (long press) Press the key, the radio automatically tune to channel 9. Press the key again, the radio automatically tune to channel 19. Press the key third time to return to the previous channel. Long press key to enter the memu. 4.7 Emergency Channels ~ MENU .................................................. Choose a 8Ω external optional speaker with 3.5 mm mono connector. 4.9 Install External Speaker ............................................................... Press and hold the PTT switch on the microphone to transmit a message, " "is appears on the LCD. Release the switch to listen to an incoming communication, " " disappears form the LCD. 4.8 Transmitting ..................................................................................... Long press key to enter the menu function setting. Short press key to select the menu to set, the parameter appears on the LCD. You can set the following: 4.13.1. VOX sensitivity 4.13.2. VOX delay time 4.13.3. Roger beep 4.13.4. Key beep 4.13.5. Backlight brightness 4.13.6. TOT (Time out timer) 4.13.7. PA-RX path Short press / keys to modify the value of the parameter. Press PTT switch or long press key or wait for 10 seconds to store and exit MENU. 4.11 Menu Operations .......................................................................... Turn on the power while pressing the key and the key on the unit to reset to the factory settings. 4.10 Resume Factory Default ............................................................ 6 VOX sensitivity allows the adjustment of the microphone for an optimum transmission quality. At VOX sensitivity menu, " " blinks, the current setting and its value appear on the LCD. 4.11.1. VOX Sensitivity The Roger Beep function signals the receiver that the other end has ended the radio message. At Roger Beep menu, " " blinks, the current setting appear on the LCD. Use the / keys to activate ( to ) 6 roger tones / deactivate ( ) the function. Default setting is: . When the function is active, " " appeears on the LCD. 4.11.3. Roger Beep VOX delay time allows avoiding the sudden cut of the transmission by adding a delay at the end of speaking. At VOX delay time menu, " " blinks, the current setting and its value appear on the LCD. Adjustable level from (short delay) to (long delay). Default value is: . 4.11.2. VOX Delay Time Adjustable level from (high level) to (low level). Default value is: . 7 When the function is activated, a beep sounds when a key is pressed. At key beep menu, press the / keys to activate () / deactivate ( ) the function. Default setting is: . 4.11.4. Key Beep This function allows adjusting the brightness of the lighting. At backlight brightness menu, press the / keys to change the value of the backlight brightness. 3 steps from to . Default value is: . 4.11.5. Backlight Brightness If the PTT switch is pressed for more than "TOT" time, the display starts blinking and the transmission ends. A beep will sound unit the PTT switch is released. At TOT menu, press the / keys to set the TOT, disable the function. Time range to , time stepping is: 1 minute. Default value is: . 4.11.6. TOT (Time Out Timer) This function allows to select the operating mode of the PA. At PA-RX Path menu, " " blinks, the current setting appear on the LCD. Press the / keys to select the operating mode of the PA : ON, OF. : the modulatio…

Text truncated - open the document above for the full version.

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: January 7, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: T4K-AT-505 Qixiang Electron Science & Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Ken Xu Title: General Manager

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: January 7, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: T4K-AT-505 Qixiang Electron Science & Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Ken Xu Title: General Manager

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-01-07 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: T4K-AT-505 Qixiang Electron Science & Technology Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, AMS Inc is our designated U.S. agent for service of process for the above referenced FCC ID. Qixiang Electron Science & Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. AMS Inc accepts as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: AMS Inc Address: 4416 Technology Dr Fremont CA 94538 USA Contact Person: Frank Wang FRN: 0034134825 Tel.: 510-353-0211 Email: [email protected] Applicant Information: Name: Qixiang Electron Science & Technology Co., Ltd. Address: Qixiang Building,Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Contact Person: KenXu FRN: 0014815799 Tel.: 86-592-22652998 Email: [email protected] Sincerely, U.S. agent signature Applicant signature Date:2026-01-07 Date: 2026-01-07

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Jan. 07, 2026 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: T4K-AT-505 Models: AT-505, AT-505PRO, AT-505MINI, AT-505PLUS, V- 505MINI To Whom It May Concern: We, The Qixiang Electron Science & Technology Co., Ltd. hereby declare that the model : AT-505PRO, AT-505MINI, AT-505PLUS, V-505MINI is identical with the model : AT-505, except the model name. Sincerely, Qixiang Electron Science & Technology Co., Ltd. Signature: [Ken Xu, General Manager]

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 07, 2026 Subject; Request for Confidentiality FCC ID: T4K-AT-505 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune Up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ken Xu Title: General Manager

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Letter of Authorization Company: Qixiang Electron Science & Technology Co., Ltd. Address: Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Product Name: CB Radio Model Number(s): AT-505, AT-505PRO, AT-505MINI, AT-505PLUS, V-505MINI Product Description: CB Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jan. 07, 2026 Name: Ken Xu Title: General Manager Company: Qixiang Electron Science & Technology Co., Ltd.

Report No.: AGC01284251202AP02 Page 1 of 7 EXTERNAL PHOTOS All View of EUT Top View of EUT Report No.: AGC01284251202AP02 Page 2 of 7 Bottom View of EUT Front View of EUT Report No.: AGC01284251202AP02 Page 3 of 7 Back View of EUT Left View of EUT Antenna Port Report No.: AGC01284251202AP02 Page 4 of 7 Right View of EUT Hand Microphone Top View of EUT Report No.: AGC01284251202AP02 Page 5 of 7 Bottom View of EUT Front View of EUT Report No.: AGC01284251202AP02 Page 6 of 7 Back View of EUT Left View of EUT Report No.: AGC01284251202AP02 Page 7 of 7 Right View of EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*20mm FCC ID: T4K-AT-505

Report No.: AGC01284251202AP02 Page 1 of 10 INTERNAL PHOTOS Open View-1 of EUT Open View-2 of EUT Report No.: AGC01284251202AP02 Page 2 of 10 Open View-3 of EUT Open View-4 of EUT Report No.: AGC01284251202AP02 Page 3 of 10 Internal View-1 of EUT Internal View-2 of EUT Report No.: AGC01284251202AP02 Page 4 of 10 Internal View-3 of EUT Internal View-4 of EUT Report No.: AGC01284251202AP02 Page 5 of 10 Internal View-5 of EUT Internal View-6 of EUT Report No.: AGC01284251202AP02 Page 6 of 10 Internal View-7 of EUT Internal View-8 of EUT Report No.: AGC01284251202AP02 Page 7 of 10 Internal View-9 of EUT Internal View-10 of EUT Report No.: AGC01284251202AP02 Page 8 of 10 Internal View-11 of EUT Hand Microphone Open View-1 of EUT Report No.: AGC01284251202AP02 Page 9 of 10 Open View-2 of EUT Internal View-1 of EUT Report No.: AGC01284251202AP02 Page 10 of 10 Internal View-2 of EUT ****************************************End of Report*************************************

Page 1 of 22 FCC Test Report Report No.: AGC01284251202FE01 FCC ID : T4K-AT-505 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : CB Radio BRAND NAME : N/A MODEL NAME : AT-505, AT-505PRO, AT-505MINI, AT-505PLUS, V-505MINI APPLICANT : Qixiang Electron Science & Technology Co., Ltd. DATE OF ISSUE : Dec. 23, 2025 STANDARD(S) : FCC Part 15 Subpart B REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01284251202FE01 Page 2 of 22 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 23, 2025 Valid Initial Release Report No.: AGC01284251202FE01 Page 3 of 22 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 2.2 Auxiliary Surrounding Description ............................................................................................................. 5 2.3 Test Methodology ...................................................................................................................................... 6 2.4 Definition of Device Classification ............................................................................................................. 6 2.5 Description of Test Modes ......................................................................................................................... 6 3. Test Environment ............................................................................................................................................ 7 3.1 Address of The Test Laboratory ................................................................................................................ 7 3.2 Test Facility ................................................................................................................................................ 7 3.3 Environmental Conditions ......................................................................................................................... 8 3.4 Measurement Uncertainty ......................................................................................................................... 8 3.5 List of Equipment Used ............................................................................................................................. 9 4. Summary of Test Results ............................................................................................................................. 10 5. Radiated Emission Measurements .............................................................................................................. 11 5.1 Provisions Applicable .............................................................................................................................. 11 5.2 Measurement Setup ................................................................................................................................ 11 5.3 Measurement Procedure ......................................................................................................................... 12 5.4 Measurement Result ............................................................................................................................... 13 6. Conducted Emission Measurements .......................................................................................................... 19 6.1 Provisions Applicable .............................................................................................................................. 19 6.2 Measurement Setup ................................................................................................................................ 19 6.3 Measurement Procedure ......................................................................................................................... 20 6.4 Measurement Result ............................................................................................................................... 20 Appendix I: Photographs of Test Setup .......................................................................................................... 21 Appendix II: Photographs of Test EUT ........................................................................................................... 21 Report No.: AGC01284251202FE01 Page 4 of 22 1. General Information Applicant Qixiang Electron Science & Technology Co., Ltd. Address Qixiang Building,Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Manufacturer Qixiang Electron Science & Technology Co., Ltd. Address Qixiang Building,Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Factory Qixiang Electron Science & Technology Co., Ltd. Address Qixiang Building,Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Product Designation CB Radio Brand Name N/A Test Model AT-505 Series Model(s) AT-505PRO, AT-505MINI, AT-505PLUS, V-505MINI Difference Description All the series models are the same as the test model except for the model names. Date of receipt of test item Dec. 02, 2025 Date of Test Dec. 02, 2025~Dec. 23, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCTR-ER-FCC-SDOC V1.0 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Bibo Zhang (Project Engineer) Dec. 23, 2025 Reviewed By Jack Gui (Reviewer) Dec. 23, 2025 Approved By Angela Li (Authorized Officer) Dec. 23, 2025 Report No.: AGC01284251202FE01 Page 5 of 22 2. Product Information 2.1 Product Technical Descripti…

Text truncated - open the document above for the full version.

Report No.: AGC01284251202AP03 Page 1 of 1 TEST SETUP PHOTOS Radiated Emission Test Setup-Below 30MHz Radiated Emission Test Setup-Above 30MHz ****************************************End of Report*************************************