T4K-AT510010 METER AMATEUR RADIO

A1.0 Qixiang Electron Science & Technology Co.,Ltd. www.anytone.net Operating Instructions AT-5100 10 METER AMATEUR RADIO CONTENTS 1. FUNCTIONS & FEATURES ..............................................................1 2. STANDARD ACCESSORIES ............................................................2 3. INSTALLATION .................................................................................2 4. GETTING ACQUAINTED ..................................................................5 5. HOW TO USE YOUR RADIO ...........................................................8 6. BACKGROUND FUNCTION / MAIN MENU OPERATION .............11 7. PUBLIC MENU OPERATION .........................................................14 8. CHANNEL MENU OPERATION .....................................................14 9. BT MENU OPERATION(OPTIONAL) .............................................16 10. SPECIFICATIONS .........................................................................17 11. CTCSS/DCS CHART ....................................................................18 1 ◆ Large LCD display with backlight dimming ◆ FM / AM / USB / LSB / CW / PA modes ◆ Frequency Tuning Step: 10Hz / 100Hz / 1KHz / 5KHz / 10KHz / 100KHz / 1MHz ◆ ±500Hz/5KHz CLARIFIER Adjustment (R/T/R+T selectable) ◆ Flexible Menu Functions and PC CPS Software option ◆ TX and RX Noise Reduction ◆ VFO / BAND / Memory Channel modes ◆ CTCSS/DCS with RX/TX Split functions ◆ VOX Function ◆ SQ, ASQ Function (FM and AM mode only) ◆ RF GAIN Adjustment ◆ RF PWR Adjustment ◆ SCAN Function ◆ NB/ANL Function ◆ Repeater Shift / Offset Frequency Function ◆ SIG / PWR / SWR Meter Functions ◆ TOT Function ◆ HI-CUT Function ◆ SWR Protection ◆ Power Supply Voltage Protection ◆ Key-Lock Function ◆ Band Name Customization Function (via PC CPS) ◆ Compatible with electret and dynamic MIC types ◆ ECHO Function ◆ Programmable RB Function ◆ Keypad Beep Function ◆ +10KHZ Function ◆ DW Dual-Watch Function ◆ EMG Channel Function 1. FUNCTIONS & FEATURES 2 Radio Self-tapping Screws Microphone Pads for bracket ower cord Adjusting screws Microphone Hanger Mounting BracketNon-slip Mat Spare Fuses (10A, 125V) Choose the most appropriate location from a simple and practical point of view. If installed in a vehicle, care should be taken to ensure your radio does not obstruct the driver or passengers. 3.1 Microphone Connection 1. Insert the microphone connector into the microphone jack. 2. The microphone connector will "click" into place. 1. Use the Self-tapping Screws and Pads to fix the Bracket to a suitable location. 2. Attach the Adhesive Case Protectors to the inside ends of the Mounting Bracket and insert the Radio. Fit the Adjusting Screws loosely, and choose a suitable angle by moving the Adjusting Screws to one of the 3 positions on the Mounting Bracket. 3. Tighten the Adjusting Screws firmly by hand. Make sure the radio and all accessories are securely mounted. 2. STANDARD ACCESSORIES 3. INSTALLATION 3 3.2 Antenna Installation 3.3 Power Connection Before using this radio, please install an efficient and resonant antenna. Using an antenna that is correctly installed and tuned will enable excellent communication performance. This radio requires an antenna impedance of 50 ohms, unbalanced. 1. Screw the antenna connector into the antenna jack. 2. Grounding the antenna system to ensure best performance of this radio. This radio requires a 13.2V (12V) DC power supply. Never connect the radio directly to a 24V DC battery system, as can be found in some vehicles. Please refer to the radio Specifications to ensure your 13.2V DC power supply can provide enough current (amps), otherwise poor performance may occur. 3. A mobile antenna can be mounted in various locations, for example: 1. Connect the positive (red) power cable to the + terminal of the battery. 2. Connect the negative (black) power cable to the - terminal of the battery. 3. Connect the DC power cable to the transceiver's power supply connector. ▲ Locate the power cable away from high temperature, moisture, and other electrical systems. Ensure it is installed where it cannot be damaged. ▲ It is not recommended to use a vehicle cigar/cigarette lighter socket to power the radio, as it may not supply the correct voltage or current. ▲ Do not remove the fuse holder from the cable. WARNING: ▲ NEVER transmit without a connected resonant antenna, or a suitable 50 ohm load being connected. Damage to the radio may result. ▲ To reduce the risk of electric shock, or radio damage, base station installations should include lightning protection devices. ▲ Ask your Anytone dealer for available antenna options. - (Black wire) connected to chassis ground in most 12V vehicles (confirm with your vehicle manufacturer) + (Red wire) 12V 4 3.5 Install Microphone Hanger 3.6 Install External Speaker (Optional) Choose a location which will not interfere with the driver. Use the supplied self-tapping screws and pads to install the hanger. If using an external speaker, please choose an 8 ohm speaker with a 3.5mm mono (double cable) TS type plug. 1. Install the external speaker in a suitable place. 2. Plug into the speaker jack. 3.4 Replacing Fuses This radio requires a 10A, 250V fuse. If the fuse blows, determine the reason, then correct the problem. After the problem is resolved, replace the fuse. If newly installed fuses continue to blow, disconnect the power cable and contact your authorized dealer or an authorized service center: 1. Twist the two fuse covers in opposite directions, and open it. , IN-LINE FUSE HOLDER 2. Replace the blown fuse with new one, and close the fuse holder. 3. Be sure to only use the correct fuse type, otherwise damage may occur. FUSE IN-LINE FUSE HOLDER IN-LINE FUSE HOLDER IN-LINE FUSE HOLDER 10A 250V FUSE 5 RB BP DW L-OFF SCAN S.LIST COR DIM NB ANL +10K HCUT MEM STOR EMG LOCK 4.1 Front Panel No.KeyFunctions 1 Echo RB/BP Roger beep, Key beep and Echo on/off control 2 CTC/DCS COR.DIM CTCSS/DCS control Backlight …

Text truncated - open the document above for the full version.

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 16, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: T4K-AT5100 FRN: 0014815799 [Qixiang Electron Science & Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Ken Xu)

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 16, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: T4K-AT5100 FRN: 0014815799 [Qixiang Electron Science & Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Ken Xu)

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-07-17 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: T4K-AT5100 Qixiang Electron Science & Technology Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, AMS Inc is our designated U.S. agent for service of process for the above referenced FCC ID. Qixiang Electron Science & Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. AMS Inc accepts as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: AMS Inc Address: 4416 Technology Dr Fremont CA 94538 USA Contact Person: Frank Wang FRN:0034134825 Tel.: 510-353-0211 Email: [email protected] Applicant Information: Name: Qixiang Electron Science & Technology Co., Ltd. Address: Qixiang Building,Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Contact Person: KenXu, General Manager FRN: 0014815799 Email: [email protected] Sincerely, U.S. agent signature Applicant signature Date:2026-07-17 Date: 2026-07-17

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Jul. 16, 2026 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: T4K-AT5100 Model Number: AT-5100, AT-5100BT, AT-5100PLUS, RADIODDITY QT30, Voyager VR-5100 To Whom It May Concern: We, Qixiang Electron Science & Technology Co., Ltd. hereby declare that the models are identical except for the model name. Sincerely, Signature: Contact person: Ken Xu

Qixiang Electron Science & Technology Co., Ltd. Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 16, 2026 Subject; Request for Confidentiality FCC ID: T4K-AT5100 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Signature: Contact person: Ken Xu Title: General Manager

Letter of Authorization Company: Qixiang Electron Science & Technology Co., Ltd. Address: Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Product Name: 10 METER AMATEUR RADIO Model Number(s): AT-5100, AT-5100BT, AT-5100PLUS, AVANTI unica, CRT RAFALE MKII, RADIODDITY QT30 Product Description: 10 METER AMATEUR RADIO We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 14, 2026 Name: Ken Xu Title: Manager Company: Qixiang Electron Science & Technology Co., Ltd.

Report No.: AGC01284260601AP03 Page 1 of 7 EXTERNAL PHOTOS All View of EUT Top View of EUT Report No.: AGC01284260601AP03 Page 2 of 7 Bottom View of EUT Front View of EUT Report No.: AGC01284260601AP03 Page 3 of 7 Back View of EUT Left View of EUT HF Antenna Port Report No.: AGC01284260601AP03 Page 4 of 7 Right View of EUT Hand Microphone Top View of EUT Report No.: AGC01284260601AP03 Page 5 of 7 Bottom View of EUT Front View of EUT Report No.: AGC01284260601AP03 Page 6 of 7 Back View of EUT Left View of EUT Report No.: AGC01284260601AP03 Page 7 of 7 Right View of EUT ****************************************End of Report*************************************

FCC ID Label Location 100mm&20mm FCC ID: T4K-AT5100 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Report No.: AGC01284260601AP03 Page 1 of 16 INTERNAL PHOTOS Open View of EUT (Figure 1) Open View of EUT (Figure 2) Report No.: AGC01284260601AP03 Page 2 of 16 Internal View of EUT-1 Internal View of EUT-2 BT Antenna Report No.: AGC01284260601AP03 Page 3 of 16 Internal View of EUT-3 Internal View of EUT-4 Report No.: AGC01284260601AP03 Page 4 of 16 Internal View of EUT-5 Internal View of EUT-6 Report No.: AGC01284260601AP03 Page 5 of 16 Internal View of EUT-7 Internal View of EUT-8 Report No.: AGC01284260601AP03 Page 6 of 16 Internal View of EUT-9 Internal View of EUT-10 Report No.: AGC01284260601AP03 Page 7 of 16 Internal View of EUT-11 Internal View of EUT12 Report No.: AGC01284260601AP03 Page 8 of 16 Internal View of EUT-13 Internal View of EUT -14 Report No.: AGC01284260601AP03 Page 9 of 16 Internal View of EUT-15 Internal View of EUT-16 Report No.: AGC01284260601AP03 Page 10 of 16 Internal View of EUT-17 Internal View of EUT-18 Report No.: AGC01284260601AP03 Page 11 of 16 Internal View of EUT-19 Internal View of EUT-20 Report No.: AGC01284260601AP03 Page 12 of 16 Internal View of EUT-21 Internal View of EUT-22 Report No.: AGC01284260601AP03 Page 13 of 16 Internal View of EUT-23 Internal View of EUT-24 Report No.: AGC01284260601AP03 Page 14 of 16 Internal View of EUT-25 Hand Microphone Open View of EUT (Figure 1) Report No.: AGC01284260601AP03 Page 15 of 16 Open View of EUT (Figure 2) Internal View of EUT-1 Report No.: AGC01284260601AP03 Page 16 of 16 Internal View of EUT-2 ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC01284260601FH01 FCC ID : T4K-AT5100 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 10 METER AMATEUR RADIO BRAND NAME : N/A MODEL NAME : AT-5100, AT-5100BT, AT-5100PLUS, RADIODDITY QT30, Voyager VR-5100 APPLICANT : Qixiang Electron Science & Technology Co., Ltd. DATE OF ISSUE : Jul. 10, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01284260601FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 10, 2026 Valid Initial Release Report No.: AGC01284260601FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Mobile Device Evaluation Method and Limit ................................................................................................ 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC01284260601FH01 Page 4 of 10 1. General Information Applicant Qixiang Electron Science & Technology Co., Ltd. Address Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Manufacturer Qixiang Electron Science & Technology Co., Ltd. Address Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Factory Qixiang Electron Science & Technology Co., Ltd. Address Qixiang Building, Tangxi Industrial Zone, Luojiang, Quanzhou, Fujian, 362011 China Product Designation 10 METER AMATEUR RADIO Brand Name N/A Test Model AT-5100 Series Model(s) AT-5100BT, AT-5100PLUS, RADIODDITY QT30, Voyager VR-5100 Difference Description Only the model names are different Date of receipt of test item Jun. 12, 2026 Date of Test Jun. 12, 2026~Jul. 10, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Bibo Zhang (Project Engineer) Jul. 10, 2026 Reviewed By Jack Gui (Reviewer) Jul. 10, 2026 Approved By Angela Li (Authorized Officer) Jul. 10, 2026 Report No.: AGC01284260601FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V1.0 Software Version V1.0 Modulation Type BT_BLE: BLE GFSK 1Mbps GFSK 2Mbps BT_BR_EDR: BR GFSK, EDR π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 3.24dBi Minimum Assessment Distance 164cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC01284260601FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 101 & 201, Building 19(B5), Junfeng Industrial Park, Chongqing Road, P.R.C. 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC01284260601FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity…

Text truncated - open the document above for the full version.

1、规格 报告主要提供BT\WIFI天线的无源性能参数的测试。 2、电器性 2-1规格标准 WIFI天线工作频段为 2400MHz-2500MHz 在此频段产生谐振。下表是海磁通为设计L5-WIFI 天线的量产性能测试指标. 天线 频率 (MHz) VSWR WIFI 2400-2500 ≤ 2.0 2-2天线的匹配电路 无匹配 3、驻波比（VSWR）的测试 3-1 测试的设置 VSWR 测试装置依次的连接为：E5071B网络分析仪 → 50欧姆的同轴Cable→170mm长的铜管→ 测试治具。 测试治具的处理：从手机PCB上天线50欧姆测试点处用一根硬质电缆引出SMA-J接头，与套有 扼流圈的铜管连接，再依次连接其他装置。 3-2测试结果 WIFI Specification The report focuses on the passive performance parameters of BT\WIFI antennas. Electrical Specification standards The WIFI antenna operates in the 2400MHz-2500MHz frequency band and resonates in this band. The following table shows the production performance of L5-WIFI antenna designed by Magnetron. Ant Matching circuit for antenna NC Testing of VSWR Test setup E5071B → 50Cable→170mm DU T → Model:N/A Ant Type:PCB Antenna 4 有源测试的设置 有源测试装置依次的连接为：Agilent E5062A → 50欧姆的同轴Cable→EST远场测试系统→待 测试手机。 4-1 测试的场地 海磁通采用国内最先进的 3D/2D ETS 微波暗室测试系统，测试方式属于远场测试，频率范 围为 600MHz—6GHz，暗室屏蔽衰减在-120dBm， 4-2 测试结果 2400MHz Gain:2.17dBi Efficiency: 44.68% 2410MHz Gain:2.45dBi Efficiency: 41.70% Agilent E5062A → 50Cable→EST → DU T 2420MHz Gain:2.61dBi Efficiency: 41.56% 2430MHz Gain:2.8dBi Efficiency: 46.70% 2440MHz Gain:2.93dBi Efficiency: 46.34% 2450MHz Gain:3.24dBi Efficiency: 44.88% 2460MHz Gain:3.18dBi Efficiency: 46.96% 2470MHz Gain:2.95dBi Efficiency: 46.37% 2480MHz Gain:2.84dBi Efficiency: 45.51% 2490MHz Gain:2.71dBi Efficiency: 47.79% 2500MHz Gain:2.41dBi Efficiency:44.69% 天线尺寸 Size （Unit mm） 15mm 5mm

Page 1 of 66 FCCTestReport ReportNo.:AGC01284260601FR02 FCCID: T4K-AT5100 APPLICATIONPURPOSE: OriginalEquipment PRODUCTDESIGNATION:10METERAMATEURRADIO BRANDNAME:N/A MODELNAME: AT-5100,AT-5100BT,AT-5100PLUS,RADIODDITYQT30, VoyagerVR-5100 APPLICANT:QixiangElectronScience&TechnologyCo.,Ltd. DATEOFISSUE:Jul.10,2026 STANDARD(S):FCCPart15SubpartC§15.247 REPORTVERSION:V1.0 AttestationOfGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC01284260601FR02 Page2of66 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Jul.10,2026ValidInitialRelease ReportNo.:AGC01284260601FR02 Page3of66 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TestFrequencyList.....................................................................................................................................6 2.3RelatedSubmittal(S)/Grant(S).................................................................................................................7 2.4TestMethodology........................................................................................................................................7 2.5SpecialAccessories....................................................................................................................................7 2.6EquipmentModifications.............................................................................................................................7 2.7AntennaRequirement.................................................................................................................................7 3.TestEnvironment..............................................................................................................................................8 3.1AddressoftheTestLaboratory...................................................................................................................8 3.2TestFacility..................................................................................................................................................8 3.3EnvironmentalConditions...........................................................................................................................9 3.4MeasurementUncertainty...........................................................................................................................9 3.5ListofEquipmentUse...............................................................................................................................10 4.SystemTestConfiguration.............................................................................................................................11 4.1EUTConfiguration.....................................................................................................................................11 4.2EUTExercise............................................................................................................................................11 4.3ConfigurationofTestedSystem................................................................................................................11 4.4EquipmentUsedInTestedSystem..........................................................................................................11 4.5SummaryofTestResults..........................................................................................................................12 5.DescriptionofTestModes.............................................................................................................................13 6.DutyCycleMeasurement...............................................................................................................................15 7.RFOutputPowerMeasurement....................................................................................................................16 7.1ProvisionsApplicable................................................................................................................................16 7.2MeasurementProcedure..........................................................................................................................16 7.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................16 7.4MeasurementResult.................................................................................................................................17 8.6dBBandwidthMeasurement.......................................................................................................................21 8.1ProvisionsApplicable................................................................................................................................21 8.2MeasurementProcedure..........................................................................................................................21 8.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................21 8.4MeasurementResults...............................................................................................................................22 9.PowerSpectralDensityMeasurement.........................................................................................................29 9.1ProvisionsApplicable................................................................................................................................29 9.2MeasurementProcedure............................................................................................................…

Text truncated - open the document above for the full version.

ReportNo.:AGC01284260601FR02 Page39of66 Test_Graph_LE1M_ANT1_2480_1Mbps_HigherBandEmissions Test_Graph_LE2M_ANT1_2402_2Mbps_ReferenceLevel ReportNo.:AGC01284260601FR02 Page40of66 Test_Graph_LE2M_ANT1_2402_2Mbps_LowerBandEmissions Test_Graph_LE2M_ANT1_2402_2Mbps_HigherBandEmissions ReportNo.:AGC01284260601FR02 Page41of66 Test_Graph_LE2M_ANT1_2440_2Mbps_ReferenceLevel Test_Graph_LE2M_ANT1_2440_2Mbps_LowerBandEmissions ReportNo.:AGC01284260601FR02 Page42of66 Test_Graph_LE2M_ANT1_2440_2Mbps_HigherBandEmissions Test_Graph_LE2M_ANT1_2480_2Mbps_ReferenceLevel ReportNo.:AGC01284260601FR02 Page43of66 Test_Graph_LE2M_ANT1_2480_2Mbps_LowerBandEmissions Test_Graph_LE2M_ANT1_2480_2Mbps_HigherBandEmissions ReportNo.:AGC01284260601FR02 Page44of66 TestGraphsofBandEdgeEmissionsinNon-RestrictedFrequencyBands Test_Graph_LE1M_ANT1_2402_1Mbps_LowerBandEdgeEmissions Test_Graph_LE1M_ANT1_2480_1Mbps_HigherBandEdgeEmissions ReportNo.:AGC01284260601FR02 Page45of66 Test_Graph_LE2M_ANT1_2402_2Mbps_LowerBandEdgeEmissions Test_Graph_LE2M_ANT1_2480_2Mbps_HigherBandEdgeEmissions ReportNo.:AGC01284260601FR02 Page46of66 11.RadiatedSpuriousEmission 11.1MeasurementLimit  FCCPart15.209Limitinthebelowtabletobefollowed Frequencies (MHz) FieldStrength (microvolts/meter) MeasurementDistance (meters) 0.009~0.4902400/F(kHz)300 0.490~1.70524000/F(kHz)30 1.705~30.03030 30~881003 88~2161503 216~9602003 Above9605003 Note:Allmodesweretestedforrestrictedbandradiatedemission,thetestrecordsreportedbelowaretheworst resultcomparedtoothermodes. 11.2MeasurementProcedure 1.TheEUTwasplacedonthetopoftheturntable0.8or1.5meteraboveground.Thephasecenterofthe receivingantennamountedonthetopofaheight-variable…

Text truncated - open the document above for the full version.