TA8AKRC1610023Multi-standard remote radio

Attestation Statement Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal Statement of Compliance 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference 2024-05-03 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: TA8AKRC1610023 Attestations for Sections 2.911(d)(5)(i) and 2.911(d)(5)(ii) of the FCC Rules Attestation Under 47 CFR § 2.911(d)(5)(i) Ericsson AB certifies that, as of the date of the filing of this application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to Section 2.903 of the FCC rules. Attestation Under 47 CFR § 2.911(d)(5)(ii) Ericsson AB certifies that, as of the date of the filing of the application, it is not identified on the Covered List established pursuant to Section 1.50002 of the FCC rules as an entity producing “covered” equipment. Ericsson AB, By: Peter Moberg Head PEU Radio Ericsson AB Torshamnsgatan 23 SE-16480 Stockholm, Sweden

FCC authorization letter Confidentiality Class External Confidentiality Label Document Type Page Ericsson Confidential Statement of Compliance 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference 1/0133-600/FEA2926603/14 L 2023-12-15 I, the undersigned, hereby entrust: to act as my representatives in following: To make the necessary applications for FCC equipment certifications. ................................................................ (Signature) Peter Moberg Head PEU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden Lars Wallin Bertil Johansson Niklas Roos Afrah Ali Sadiq Hans Östgaard BNEW Hardware Engineering PEU Radio Torshamnsgatan 23 SE-164 80 Stockholm Sweden David Bolzon Denis Lalonde Dave Pampararo Gavin Gan BNEW Hardware Engineering PEU Radio 349 Terry Fox Drive Ottawa, K2K 2V 6 Canada Xiaoying Jiang Jieying Zhu Hua Yang Yuejun Ma Zheng Zhao Tinting Wang BNEW Hardware Engineering PEU Radio No.5 Lize East Street, Chaoyang District 100102 Beijing China Xiao Hu Z Ling Pan L Ting Chen BNEW Hardware Engineering PEU Radio No.1366 Tianfu Avenue 610041 Chengdu China DocuSign Envelope ID: 9B137FD7-5A09-454F-9221-E685A4702E66

Attestation Statement Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked ERAWALA Lars Wallin Document Number Revision Date Reference B 2024-02-29 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Section 2.911(d)(7) of the FCC Rules Designation of Contact for Service of Process Ericsson AB (“Applicant”) hereby designates Ericsson Inc (“Agent”) as its agent for service of process under 47 CFR Section 2.911(d)(7). Agent provides its consent and acknowledges its obligation to accept service of process at the U.S.-based address listed below for matters relating to the equipment associated with this application. The email address of Agent also is listed below. Applicant acknowledges and accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has terminated all marketing and importation of the equipment associated with this application or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. On Behalf of Applicant: _______________________________ Peter Moberg Head of PEU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden FRN: 0015544414 On Behalf of Agent: _______________________________ Paul Challoner VP Network Product Solutions Ericsson Inc 6300 Legacy Drive Plano TX 75024 Email: [email protected] FRN: 0033444811 DocuSign Envelope ID: 498B7594-49A2-45D7-A701-8B9D99A6A793DocuSign Envelope ID: EAFA7EA5-C780-4833-93F0-54B3D28CDD40

Subject: Certification for FCC ID: TA8AKRC1610023 Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (2) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference B 2024-06-23 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Attention: Equipment Authorization Branch To Whom It May Concern: Ericsson AB requests a Grant of Certification (Type Acceptance) for the above-mentioned FCC Identifier. The radio operates in the Private Land Mobile Radio Services and Miscellaneous Wireless Communications Services and is designed for use in LTE, NB IoT, ESS, NR cellular telephone system. This FDD radio(Radio 4494 44B14 20B29 M01) operates in Band 14 and Band 29 as per FCC 47 CFR Part 90 and Part 27. Band 14: Transmitter from 758 - 768 MHz and the receiver from 788 - 798 MHz. Band 29: Transmitter from 717 - 728 MHz. No receiver in this band. Details regarding supported functionality, see clause 1.1 and 1.2 in Exhibit 12 - Technical Circuit Description. This radio will always require a license for transmission. The Exhibit 8 - manuals submitted with this application is generic and may cover multiple products. This application is only valid for the model specified in the Exhibit 12 – Technical Circuit description. Ericsson AB accept by this request the agreement set out in the document “IP SPCR 125 Annex A2 Agreements on Post-market surveillance for radio equipment certified for the US market. “ Ericsson AB requests confidentiality under CFR 0.459 according to attached letter. We further certify that the applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to section 5301 of the Anti-Drug abuse Act of 1988, 21 U.S.C. Section 862. If additional information is needed, please contact me on the below listed number. Bertil Johansson Senior RA strategy developer Isafjordsgatan 10 SE-164 80 Stockholm Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 2 (2) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference B 2024-06-23 Sweden Telephone No.: +46 70 267 48 71 e-mail: [email protected]

Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference A 2024-06-12 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046, USA Attention: Equipment Authorization Branch Subject: Request for Long term Confidentiality: FCC ID: TA8AKRC1610023 To whom it may concern: We, Ericsson AB, hereby request that the Exhibits/Items listed below be withheld from public inspection in accordance to sections 0.457 and 0.459 of the Commission’s Rules for FCC. This due to the following reasons: Ericsson Base Stations (BS) are designed strictly based on the technical specifications of the international project 3GPP (the 3rd Generation Partnership Project). The competition in this field is very intense and a less advanced solution/design could get an unfair advantage by accessing the information as listed below from common domain. As we believe that we have implemented groundbreaking solutions and designs into our recent BS/Radio Unit (RU) / Remote Radio Unit (RRU) / Radio Dot (RD) compared to the previous BS/RU/RRU/RD, the listed Exhibits/Items need to be protected from disclosure to our competitors in the industry. As the FCC records have in- depth information and a very wide distribution, we believe that you can understand our concerns. We are strong in our belief that all vendors in the industry need to compete by their own merits. We regard these Exhibits/Items to be our intellectual property and therefore as confidential information. There are advanced technical and design solutions/information in the Exhibits/Items, as mentioned above, that we regard as Ericsson proprietary, with actual and potential patents pending. The information can be advantageous to our competitors as well as sources seeking ways to hack past the built-in security functionality. These solutions or information thereof are not accessible even for our customers or partners unless non-disclosure agreements for particular item(s) have been signed. Confidential product information can be found in, but not necessarily limited to, internal photos of the BS RU RRU and RD, block diagrams, schematics diagrams, and parts lists as well as certain documents, such as the user’s manuals. Those documents can only be accessible by the customers who purchase out BS/RU/RRU/RD and accept the conditions and therefore are provided with unique information access tools. Details for justification of Long term confidentiality under special conditions, according to KDB 726920, see document: Circuit Description - LTC Manuals and Internal photos justification. EXHIBIT 5 Schematics EXHIBIT 9 Internal Photos EXHIBIT 8 Manuals EXHIBIT 10 Parts List EXHIBIT 12 Technical Circuit Description .......................................................... Bertil Johansson Senior RA strategy developer, Ericsson AB FCC Registration Number (FRN): 0015544414 Isafjordsgatan 10 SE-164 80 Stockholm Sweden Telephone No. +46 70 267 48 71 e-mail: [email protected]

Exhibit 3 External photos Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference B 2024-06-12 Contents 1. Radio 4494 44B14 20B29 M01, KRC 161 0023/3, KRC 161 0023/31, R1C .................. 2 1.1 Front side and Rear side view ................................................................................................ 2 1.2 Label overlay view .................................................................................................................... 2 1.3 Left side and Right-side view ................................................................................................. 2 1.4 Top side and Bottom side view .............................................................................................. 3 Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 2 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference B 2024-06-12 1. Radio 4494 44B14 20B29 M01, KRC 161 0023/3, KRC 161 0023/31, R1C FCC ID: TA8AKRC1610023, IC: 287AB-AS1610023 1.1 Front side and Rear side view Front side Rear Side 1.2 Label overlay view 1.3 Left side and Right-side view Left side Right side Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 3 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference B 2024-06-12 1.4 Top side and Bottom side view Top side Bottom side Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 4 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference B 2024-06-12

Radio 4494 44B14 20B29 M01 Confidentiality Class External Confidentiality Label Document Type Page Ericsson Confidential Design Information 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EHEYLIU Henry Liu Document Number Revision Date Reference KRC 161 0023/31 A 2024-05-23 FCC ID: TA8AKRC1610023 IC: 287AB-AS1610023 IC Model No.: AS1610023 To show compliance with legal requirements, the product is marked with the following labels Below picture shows where the labels are placed on the radio. The label is a plastic sticker affixed to the product via permanent adhesive. It is designed to last the expected lifetime of the product in the environment in which the product is to be operated. The label is a plastic sticker affixed to the product via permanent adhesive. It is designed to last the expected lifetime of the product in the environment in which the product is to be operated. FCC ID: TA8AKRC1610023 IC: 287AB-AS1610023 IC Model No.: AS1610023

1 (11) GFTL-24:000252 Uen, Rev A, 2024 -02 -22 EMF Test Report: Ericsson Radio 4494 44B14 20B29 M01 (FCC ) Accred. no. 1761 Testing ISO/IEC 17025 Test report issued by an Accredited Testing Laboratory Document number: GFTL- 24:000252 Uen Rev A Date of report: 2024 -02 -22 Testing laboratory: Ericsson EMF Research Laboratory Ericsson AB SE-164 80 Stockholm Sweden Company/Client: Rosita Jonsson Ericsson AB SE-164 80 Stockholm Sweden Tests performed by: Stanislav Zhekov Dates of tests: 2024 -02 -13 Manufacturer and market name(s) of device: Ericsson Radio 4494 44B14 20B29 M01 Testing has been performed in accordance with: FCC OET Bulletin 65 IEC 62232:2022 Test results: RF exposure compliance boundaries (exclusion zones) in conformity with FCC 47 CFR 1.1310 to be included in the Customer Product Information (CPI) for Ericsson Radio 4494 44B14 20B29 M01. Additional information: Signature: Test Engineer ______________________________ Stanislav Zhekov Senior Researcher [email protected] Tel: +46 761074338 Quality Manager ___________________ Christer Törnevik Senior Expert – EMF and Health [email protected] Tel: +46 705863148 2 (11) GFTL-24:000252 Uen, Rev A, 2024 -02 -22 Summary of EMF Test Report 1 Equipment under test (EUT) Product name Radio 4494 44B14 20B29 M01 Product number KRC 161 0023/3 and KRC 161 0023/31 Supported bands, Tx frequency range (MHz) and standards B14 B29 758 - 768 717 - 728 LTE/NR/NB-IoT LTE/NR Duplexing technology FDD Antennas Product number 80010901 Tested mode(s) B14 (LTE/NR/NB-IoT) + B29 (LTE/NR) Results RF exposure compliance boundaries, outside of which the exposure is below the general public (GP) and occupational (O ) exposure limits, are listed below. Dimensions of the box -shaped compliance boundary for general public (GP) and occupational (O) exposure for Radio 4494 44B14 20B29 M01 applicable in the USA and markets employing the FCC RF exposure limits. The compliance boundaries are determined for maximum nominal output power with 0.5 dB transmission loss and 0.6 dB output power tolerance included. Mode and output power for Radio 4494 Dimensions of the box-shaped compliance boundary (m) Distance in front of antenna Width Height Distance behind antenna Band Standard Maximum nominal output power from the radio IEC 62232 installation class GP O GP O GP O GP O B14 + B29 LTE/NR/ NB -IoT (B14) + LTE/NR (B29) 4 × 40 W (B14) + 2 × 40 W (B29) E+ 14.4 6.3 11.3 5.1 3.3 2.4 0.4 0.2 For the power levels specified in the table with tolerances added, and the upward rounding of compliance boundary dimensions to the nearest decimeter, the specified results are conservative. 1 This page contains a summary of the test results. The full report provides a complete description of all test details and results. 3 (11) GFTL-24:000252 Uen, Rev A, 2024 -02 -22 1 General information The test results presented in this report define compliance boundaries for Radio 4494 44B14 20B29 M01 . Outside of these compliance boundaries, the radio frequency (RF) exposure levels are below the limits specified by the Federal Communications Commission (FCC) [1]. The tests were performed by calculations in accordance with the Ericsson RF exposure calculation procedure for base stations [2] , which is in conformity with the FCC OET Bulletin 65 [3] and IEC 62232:2022 [4] . It should be noted that the test results presented in this test report are valid for the frequency range specified in Table 1, for the antenna properties specified in Table 2, and for the power level, power tolerance, and transmission loss specified in Table 3. These data as well as the applied antenna pattern files were supplied by the client and may affect the validity of the results. Proposed EMF health and safety information for inclusion in the Customer Product Information (CPI) is provided in Appendices A, B and C. 2 Equipment under test Table 1 and Table 2 below summarize the technical data for the equipment under test (EUT) and the properties of the antenna. Table 3 lists the maximum nominal output power from the radio unit (total peak power from all antenna branches) and the total time-averaged power delivered to the antenna for the specified configuration. The total time-averaged power delivered to the antenna includes transmission loss and output power tolerance. The EUT related data in Tables 1-3 were supplied by the client. Table 1 Technical data for the EUT. Product name and product number Radio 4494 44B14 20B29 M01 KRC 161 0023/3 and KRC 161 0023/31 Supported bands, Tx frequency range (MHz), and standards B14 B29 758 - 768 717 - 728 LTE/NR/NB-IoT LTE/NR Duplexing technology FDD Exposure environment General public, Occupational IEC 62232 installation class 2 E+ Table 2 Properties of the antenna. Product number 80010901 Type Macro cell, directional, 4 Tx ( 2 columns, X polarized) Tested band and frequency range (MHz) B14 B29 758 - 768 717 - 728 Gain (dBi) 3 15.2 Electrical tilt angle (degree) 2 Number of dual-polarized elements per column and element interspacing distance (mm) 7250 Dimensions, × × (mm)1999 × 508 × 175 2 The stated IEC 62232 installation class was determined based on the total EIRP without power tolerance included and considering the transmission loss. The total EIRP was obtained using the antenna patterns provided by the client. 3 Maximum gain per antenna port obtained using the antenna patterns provided by the antenna manufacturers. 4 (11) GFTL-24:000252 Uen, Rev A, 2024 -02 -22 Table 3 M aximum nominal output power and total time -averaged power including transmission loss and output power tolerance for EUT. Band Standard Maximum nominal output power from the radio Transmission loss (dB) Power tolerance (dB) Total time- averaged power delivered to antenna (dBm/W) B14 + B29 LTE/NR/ NB -IoT (B14) + LTE/NR (B29) 4 × 40 W (B14) + 2 × 40 W (B29) 0.5 0.6 53.9 dBm / 245.6 W 3 Exposure conditions The EUT is intended to be used outdoor and installed on poles, walls, masts, towers, or similar …

Text truncated - open the document above for the full version.

REPORT i ssued by an Accredited Testing Laboratory Contact person RISE Date Reference Page Björn Skönvall 2024-06-26 P122228-F2 1 (139) Safety and Transport +46 10 516 51 23 [email protected] Ericsson AB Lennart Blixt Torshamnsgatan 21 164 80 Stockholm Radio measurements on Radio 4494 44B14 20B29 M01 with FCC ID TA8AKRC1610023 and IC 287AB- AS1610023 Accred. No. 1002 Testing ISO/IEC 17025 RI SE Research Institutes of Sweden AB Postal address Office location Phone / Fax / E-mail This report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory. Box 857 SE-501 15 BORÅS SWEDEN Brinellgatan 4 SE-504 62 Borås SWEDEN +46 10 516 50 00 +46 33 13 55 02 [email protected] Product name: Radio 4494 44B14 20B29 M01 Product number: KRC 161 0023/3 RISE Research Institutes of Sweden AB Vehicles and Automation – EMC-IKT Performed by Examined by Signature 1 Björn Skönvall Daniel Lundgren Transaction 09222115557521059487Signed BS, DL REPORT Date Reference Page 2024-06-26 P122228-F2 2 (139) RISE Research Institutes of Sweden AB Summary..................................................................................................................................... 5 Description of the test object ...................................................................................................... 6 Purpose of test ............................................................................................................................ 9 Operation modes during measurements ..................................................................................... 9 Conducted measurements ......................................................................................................... 10 Radiated measurements ............................................................................................................ 10 Test facility ............................................................................................................................... 10 References ................................................................................................................................ 10 Measurement equipment .......................................................................................................... 11 Uncertainties ............................................................................................................................. 11 Reservation ............................................................................................................................... 12 Delivery of test object .............................................................................................................. 12 Manufacturer’s representative .................................................................................................. 12 Test engineers ........................................................................................................................... 12 Test participant(-s) .................................................................................................................... 12 Test frequencies used for conducted and radiated measurements ............................................ 13 Test setup: conducted measurements ....................................................................................... 15 Test setup: radiated measurements ........................................................................................... 16 RF power output measurements according to CFR 47 §27.50 and §90.542/ RSS-130 4.6 and RSS-140 4.3, conducted ........................................................................................................... 17 Test set-up and procedure ..................................................................................................... 17 Results LTE B14 Single carrier ............................................................................................ 18 Results NB IoT SA B14 ...................................................................................................... 20 Results LTE B29 Single carrier ............................................................................................ 21 Results NR B14 SCS 15kHz Single carrier .......................................................................... 23 Results NR B29 SCS 15kHz Single carrier .......................................................................... 25 Results NR B14 SCS 30kHz Single carrier .......................................................................... 27 Results LTE B14 Multi carrier ............................................................................................. 28 Results LTE B29 Multi carrier ............................................................................................. 28 Results NR B14 SCS 15kHz Multi carrier ........................................................................... 29 Results LTE with NB IoT B14 ............................................................................................. 30 Results Multi RAT ESS NR and LTE B14 SCS 15kHz ....................................................... 31 Limits .................................................................................................................................... 33 Remark ................................................................................................................................. 36 Occupied bandwidth measurements according to CFR47 §2.1049/ RSS-Gen 6.7 ................... 37 Test set-up and procedure ..................................................................................................... 37 Results LTE B14 .................................................................................................................. 37 Results LTE B29 .................................................................................................................. 38 Results NR B14 SCS 15kHz .…

Text truncated - open the document above for the full version.

REPORT Date Reference Page 2024-06-26 P122228-F2 80 (139) RISE Research Institutes of Sweden AB Conducted spurious emission measurements according to CFR 47 §27.53 and §90.543/ RSS-130 4.7 and RSS-140 4.4 Date 2023-05-16 2023-05-20 2023-05-31 2024-06-18 2024-06-19 2024-06-20 Temperature 23 °C ± 3 °C 23 °C ± 3 °C 22 °C ± 3 °C 22 °C ± 3 °C 22 °C ± 3 °C 22 °C ± 3 °C Humidity 23 % ± 5 % 35 % ± 5 % 49 % ± 5 % 38 % ± 5 % 33 % ± 5 % 31 % ± 5 % Test set-up and procedure The measurements were made per definition in ANSI C63.26, 5.7.4. The output was connected to a spectrum analyzer with the RMS detector activated. An offset of 6 dB has been used to cover 4x4 MIMO according to ANSI C63.26 6.4.4.1 c “measure and add 10 log 10 (N ANT )” in the frequency range 9k – 1GHz, for 1–8 GHz an offset of 6.62 was used to compensate for the high pass filter The vertical lines V1 and V2 in the plots 9k to 1 GHz represent the band edges of the operating band 29. The vertical lines V3 and V4 in the plots 9k to 1 GHz represent the band edges of the operating band 14 Measurement equipment RISE number R&S FSW 43 902 073 RF attenuator 900 229 High pass filter 1-20 GHz 504 199 Coaxial cable Sucoflex 102EA BX50236 Coaxial cable Sucoflex 102EA BX50237 Testo 635, temperature and humidity meter 504 203 Measurement uncertainty: 2.6 dB Transaction 09222115557521059754Signed BS, DL REPORT Date Reference Page 2024-06-26 P122228-F2 81 (139) RISE Research Institutes of Sweden AB Results LTE B14 and B29 Single carrier LTE: TM1.1 Diagram Symbolic name B14 Symbolic name B29 Tested Port 3.1 a-d B 5LTE B 5LTE RF B 3.2 a-d M 5LTE M 5LTE RF A 3.3 a-d M 5LTE M 5LTE RF B 3.4 a-d M 5LTE - RF C 3.5 a-d M 5LTE - RF D 3.6 a-d M 10LTE M 10LTE RF B 3.7 a-d T 5LTE T 5LTE RF B Note: Measurements were mainly limited to port RF A due to the measurement result in single carrier mode that shows that the ports are electrical identical as declared by the client. Multi carrier LTE: TM1.1 Diagram Symbolic name B14 Symbolic name B29 Tested Port 3.8 a-d M2 5+5LTE M2 5+5LTE RF A Results NR B14 and B29 SCS 15kHz Single carrier NR: TM1.1 Diagram Symbolic name B14 Symbolic name B29 Tested Port 3.9 a-d B 5NR B 5NR RF A 3.10 a-d M 5NR M 5NR RF A 3.11 a-d M 10NR M 10NR RF A 3.12 a-b T 5NR T 5NR RF A Multi carrier NR: TM1.1 Diagram Symbolic name B14 Symbolic name B29 Tested Port 3.13 a-d M2 5+5NR M2 5+5NR RF A Results LTE with NB IoT GB B14 Single carrier: LTE: TM1.1,NB IoT : N-TM Diagram Symbolic name B14 Tested Port 3.14 a-d B GB+10LTE RF A 3.15 a-d T GB+10LTE RF A Results NR B14 SCS 30kHz Single carrier NR: TM1.1 Diagram Symbolic name B14 Tested Port 3.16 a-d M 10NR RF A Transaction 09222115557521059754Signed BS, DL REPORT Date Reference Page 2024-06-26 P122228-F2 82 (139) RISE Research Institutes of Sweden AB Results Multi RAT LTE and NR B14 and B29 SCS 15kHz Multi RAT: LTE and NR: TM1.1, Diagram Symbolic name B14 Symbolic name B29 Tested Port 3.17 a-d 1NR+1LTE 1NR+2LTE RF A Results LTE with NB IoT SA B14 Single carrier: LTE: TM1.1,NB IoT : N-TM Diagram Symbolic name B14 Tested Port 3.18 a-d B IoT SA + T 5LTE RF A 3.19 a-d T IoT SA + B 5LTE RF A Results Multi RAT ESS NR and LTE B14 SCS 15kHz ESS NR 50% and LTE 50% TM1.1 Diagram Symbolic name B14 Tested Port 3.20 a-d ESS NR+LTE RF A Remark The emission at 9 kHz on the plots was not generated by the test object. A complementary measurement with a smaller RBW showed that it was related to the LO feed-through. The highest fundamental frequency is 768 MHz. The measurements were made up to 8 GHz (10x768 MHz = 7.68 GHz). Transaction 09222115557521059754Signed BS, DL REPORT Date Reference Page 2024-06-26 P122228-F2 83 (139) RISE Research Institutes of Sweden AB Limits eCFR 47 §90.543 Emission limitations. e) For operations in the 758-768 MHz and the 788-798 MHz bands, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following: 1) On all frequencies between 769-775 MHz and 799-805 MHz, by a factor not less than 76 + 10 log (P) dB(-46 dBm) in a 6.25 kHz band segment, for base and fixed stations. 3) On any frequency between 775-788 MHz, above 805 MHz, and below 758 MHz, by at least 43 + 10 log (P) dB (-13 dBm) 4) Compliance with the provisions of paragraphs (e)(1) and (2) of this section is based on the use of measurement instrumentation such that the reading taken with any resolution bandwidth setting should be adjusted to indicate spectral energy in a 6.25 kHz segment. 5) Compliance with the provisions of paragraph (e)(3) of this section is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater. However, in the 100 kHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of 30 kHz may be employed. f) For operations in the 758-775 MHz and 788-805 MHz bands, all emissions including harmonics in the band 1559-1610 MHz shall be limited to −70 dBW/MHz (-40 dBm) equivalent isotropically radiated power (EIRP) for wideband signals, and −80 dBW (-50 dBm) EIRP for discrete emissions of less than 700 Hz bandwidth. For the purpose of equipment authorization, a transmitter shall be tested with an antenna that is representative of the type that will be used w…

Text truncated - open the document above for the full version.