TA8AKRC161981Multi-standard remote radio

Attestation Statement Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked ERAWALA Lars Wallin Document Number Revision Date Reference A 2023-03-01 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Section 2.911(d)(7) of the FCC Rules Designation of Contact for Service of Process Ericsson AB (“Applicant”) hereby designates Ericsson Inc (“Agent”) as its agent for service of process under 47 CFR Section 2.911(d)(7). Agent provides its consent and acknowledges its obligation to accept service of process at the U.S.-based address listed below for matters relating to the equipment associated with this application. The email address of Agent also is listed below. Applicant acknowledges and accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has terminated all marketing and importation of the equipment associated with this application or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. On Behalf of Applicant: _______________________________ Peter Moberg Head of PEU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden FRN: 0015544414 On Behalf of Agent: _______________________________ Paul Challoner VP Network Product Solutions Ericsson Inc 6300 Legacy Drive Plano TX 75024 Email: [email protected] FRN: 0033444811

Attestation Statement Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal Statement of Compliance 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference 2023-04-03 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: TA8AKRC161981 Attestations for Sections 2.911(d)(5)(i) and 2.911(d)(5)(ii) of the FCC Rules Attestation Under 47 CFR § 2.911(d)(5)(i) Ericsson AB certifies that, as of the date of the filing of this application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to Section 2.903 of the FCC rules. Attestation Under 47 CFR § 2.911(d)(5)(ii) Ericsson AB certifies that, as of the date of the filing of the application, it is not identified on the Covered List established pursuant to Section 1.50002 of the FCC rules as an entity producing “covered” equipment. Ericsson AB, By: Peter Moberg Head PEU Radio Ericsson AB Torshamnsgatan 23 SE-16480 Stockholm, Sweden DocuSign Envelope ID: 033B5D16-A766-4A49-B725-E306E10C44B4

FCC authorization letter Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked ERAWALA Lars Wallin Document Number Revision Date Reference 1/0133-600/FEA2926603/14 L 2023-02-28 I, the undersigned, hereby entrust Lars Wallin Bertil Johansson Niklas Roos Audun Helle Afrah Ali Sadiq Hans Östgaard BNEW Hardware Engineering PEU Radio Torshamnsgatan 23 SE-164 80 Stockholm Sweden David Bolzon Denis Lalonde Dave Pampararo Gavin Gan BNEW Hardware Engineering PEU Radio 349 Terry Fox Drive Ottawa, K2K 2V 6 Canada Xiaoying Jiang Weiqun Chen Jieying Zhu Hua Yang Yuejun Ma Zheng Zhao Tingting Wang BNEW Hardware Engineering PEU Radio No.5 Lize East Street, Chaoyang District 100102 Beijing China Xiao Hu Z Ling Pan L Ting Chen BNEW Hardware Engineering PEU Radio No.1366 Tianfu Avenue 610041 Chengdu China to act as my representatives in following: To make the necessary applications for FCC equipment certifications. ................................................................ (Signature) Peter Moberg Head PEU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden

Exhibit 12 Circuit Description - LTC Manuals and Internal photos justification -Confidential Confidentiality Class External Confidentiality Label Document Type Page Ericsson Confidential 2 (3) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 Technical Circuit Description FCC Long Term Confidentiality justification 1. Long term confidentiality under special conditions Long term confidentiality under special conditions is requested for Exhibit 8 (Manuals) and Exhibit 9 (Internal Photos) according to KDB 726920 D01 Confidentiality Request Procedures v01r02. 1.1 Justification We, Ericsson AB, apply for that User Manuals and Internal Photos should be withheld from public inspection in accordance with Sections 0.457 and 0.459 of the Commission’s Rules based upon: • The product in question (Remote Radio Unit, Radio, 3GPP Base Station) is a none consumer device. • The product type (Radio) is located in such a way that it’s not accessible for the general public, e.g. (but not limited to) in a RBS antenna mast or on a RBS antenna tower or on a building outside wall or on a building roof.... • The product in question is only handled (purchased / used) by professional businesses and customers to Ericsson. • Certain product information, including but not limited to, Exhibit 8 (User Manuals) and Exhibit 9 (Internal Photos) will only be available to Ericsson's customers during/past customer purchase of such Ericsson products. • Such information, including but not limited to, User Manuals and Internal Photos, is not (and will not be) public available unless violation of None Disclosure Agreements (NDA). • Ericsson prevents that sensitive information, including but not limited to, User Manuals and Internal Photos, not is disclosed to unauthorized parties, via NDA. All customers to Ericsson, purchasing Ericsson equipment, have to agree upon / sign such NDA. • Information covered by such NDA, including but not limited to, User Manuals and Internal Photos, is by Ericsson considered as confidential commercial Confidentiality Class External Confidentiality Label Document Type Page Ericsson Confidential 3 (3) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 information and is not known to the public nor to competitors to Ericsson. Such information can, if disclosed, be used by competitors to Ericsson to obtain commercial/technical gain. • Ericsson acts in a very fierce competitive market. The competition in this field is very intense and a less advanced solution/design could get an unfair advantage by accessing product related information (not known to the public nor to competitors to Ericsson) easily from an open domain with worldwide access. • The product in question is the latest Ericsson Radio Unit, designed to effectively fulfill both existing regulatory requirements and customer specific requirements. • We strongly believe that the information together is sensitive from trade secrets point of view and should be held long term confidential, preventing access from unauthorized parties (e.g. from competitors to Ericsson). • Specially, but not limited to, Internal Photos: A competitor to Ericsson can from internal photos extract vital information that reveals design related secrets. Our view is that schematics, parts list and internal photos are very closely related See annex 1: NDA confidentiality clause NDA Confidentiality Clause Confidentiality Class External Confidentiality Label Document Type Page Ericsson Confidential Information 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq BNEWIDQHJ [Lars Wallin I] Document Number Revision Date Reference BNEW-21:056373 Uen A 2021-11-18 Innovation, Science and Economic Development Canada Certification and Engineering Bureau 3701 Carling Avenue, Bldg.94 P.O. Box 11490, Station “H” Ottawa, Ontario K2H 8S2 Canada Confidentiality Each party agrees that all confidential documents, work product and information (including all computer code, internal photographs of products, block diagrams, schematic diagrams, technical and/or user manuals, related materials, and the existence of this Agreement) received or otherwise obtained from the other party pursuant to this Agreement, whether before or after the Effective Date, will be, and will be deemed to have been, received in confidence and will be used only for the purpose of carrying out the obligations of, or as otherwise contemplated by, this Agreement. Without the other party’s prior written consent, neither party may disclose any such information to any third party or grant access to the confidential equipment to any unauthorized person, and each party will disclose such information only to such of its officers, employees and agents that have a need to know such information for the purposes contemplated hereby. However, the provisions of this section will not apply to any such information that (i) is or becomes generally available to the public without the fault or negligence of either party, (ii) is already in the possession of the receiving party without being subject to another confidentiality obligation, (iii) is or becomes available to the receiving party on a non-confidential basis from a source other than the disclosing party; provided that such source is not bound by a confidentiality obligation of the disclosing party, (iv) is required to be disclosed pursuant to an arbitration proceeding conducted in accordance with this Agreement, or (v) is required to be disclosed pursuant to a requirement of any governmental authority or any statute, rule or regulation; provided that the party required to disclose such information of the other party provide to the other party notice of such requirement of any such disclosure and cooperates with the other party to …

Text truncated - open the document above for the full version.

Subject: Certification for FCC ID: TA8AKRC161981 Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Attention: Equipment Authorization Branch To Whom It May Concern: Ericsson AB requests a Grant of Certification (Type Acceptance) for the above-mentioned FCC Identifier. The radio operates in the Personal Communications Services and Miscellaneous Wireless Communications Services and is designed for use in LTE, NB IoT, ESS, NR cellular telephone system. This FDD radio operates in Band 5 and Band 12A as per FCC 47 CFR Part 22 and Part 27. Band 5: Transmitter from 869 - 894 MHz and the receiver from 824 - 849 MHz. Band 12A: Transmitter from 729 - 745 MHz and the receiver from 699 - 715 MHz. Details regarding supported functionality, see clause 1.1 and 1.2 in Exhibit 12 - Technical Circuit Description. This radio will always require a license for transmission. The Exhibit 8 - manuals submitted with this application is generic and may cover multiple products. This application is only valid for the model specified in the Exhibit 12 – Technical Circuit description. Ericsson AB accept by this request the agreement set out in the document “IP SPCR 125 Annex A2 Agreements on Post-market surveillance for radio equipment certified for the US market. Ericsson AB requests confidentiality under CFR 0.459 according to attached letter. We further certify that the applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to section 5301 of the Anti-Drug abuse Act of 1988, 21 U.S.C. Section 862. If additional information is needed, please contact me on the below listed number. Afrah Ali Sadiq Regulatory Approval Engineer Isafjordsgatan 10 SE-164 80 Stockholm Sweden Telephone No. +46 72 465 07 96 e-mail: [email protected] DocuSign Envelope ID: C93E2323-3784-4CBD-B63B-3EC9095966EB

Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046, USA Attention: Equipment Authorization Branch Subject: Request for Long term Confidentiality: FCC ID: TA8AKRC161981 To whom it may concern: We, Ericsson AB, hereby request that the Exhibits/Items listed below be withheld from public inspection in accordance to sections 0.457 and 0.459 of the Commission’s Rules for FCC. This due to the following reasons: Ericsson Base Stations (BS) are designed strictly based on the technical specifications of the international project 3GPP (the 3rd Generation Partnership Project). The competition in this field is very intense and a less advanced solution/design could get an unfair advantage by accessing the information as listed below from common domain. As we believe that we have implemented groundbreaking solutions and designs into our recent BS/Radio Unit (RU) / Remote Radio Unit (RRU) / Radio Dot (RD) compared to the previous BS/RU/RRU/RD, the listed Exhibits/Items need to be protected from disclosure to our competitors in the industry. As the FCC records have in- depth information and a very wide distribution, we believe that you can understand our concerns. We are strong in our belief that all vendors in the industry need to compete by their own merits. We regard these Exhibits/Items to be our intellectual property and therefore as confidential information. There are advanced technical and design solutions/information in the Exhibits/Items, as mentioned above, that we regard as Ericsson proprietary, with actual and potential patents pending. The information can be advantageous to our competitors as well as sources seeking ways to hack past the built-in security functionality. These solutions or information thereof are not accessible even for our customers or partners unless non-disclosure agreements for particular item(s) have been signed. Confidential product information can be found in, but not necessarily limited to, internal photos of the BS RU RRU and RD, block diagrams, schematics diagrams, and parts lists as well as certain documents, such as the user’s manuals. Those documents can only be accessible by the customers who purchase out BS/RU/RRU/RD and accept the conditions and therefore are provided with unique information access tools. Details for justification of Long term confidentiality under special conditions, according to KDB 726920, see document: Circuit Description - LTC Manuals and Internal photos justification. EXHIBIT 5 Schematics EXHIBIT 9 Internal Photos EXHIBIT 8 Manuals EXHIBIT 10 Parts List EXHIBIT 12 Technical Circuit Description .......................................................... Afrah Ali Sadiq Regulatory Approval Engineer, Ericsson AB FCC Registration Number (FRN): 0015544414 Isafjordsgatan 10 SE-164 80 Stockholm Sweden Telephone No. +46 72 465 07 96 e-mail: [email protected] DocuSign Envelope ID: D2E1E19D-60F0-4196-A307-82C9BE932C90

Exhibit 3 - External photos Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 2 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 Exhibit 3 - External photos Contents 1. Radio 4490HP 44B5 44B12A C, KRC 161 981/3, KRC 161 981/31 ................................ 3 1.1 Front side and Rear side view ................................................................................................ 3 1.2 Label overlay view .................................................................................................................... 3 1.3 Left side and Right-side view ................................................................................................. 4 1.4 Top side and Bottom side view .............................................................................................. 4 Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 3 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 1. Radio 4490HP 44B5 44B12A C, KRC 161 981/3, KRC 161 981/31 1.1 Front side and Rear side view Front side Rear Side 1.2 Label overlay view Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 4 (4) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference A 2023-04-05 1.3 Left side and Right-side view Left side Right side 1.4 Top side and Bottom side view Top side Bottom side

Exhibit 1-ID label and placement Radio 4490HP 44B5 44B12A C Confidentiality Class External Confidentiality Label Document Type Page Ericsson Confidential Design Information 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EALIAFR Afrah Ali Sadiq Document Number Revision Date Reference KRC 161 981/3 A 2023-03-24 FCC ID: TA8AKRC161981 IC: 287AB-AS161981 IC Model No.: AS161981 The label is a plastic sticker affixed to the product via permanent adhesive. It is designed to last the expected lifetime of the product in the environment in which the product is to be operated. FCC ID: TA8AKRC161981 IC: 287AB-AS161981 IC Model No.: AS161981

1 (11) GFTL-22:001675 Uen, Rev A, 2022-12-20 EMF Test Report: Ericsson Radio 4490HP 44B5 44B12A C (FCC) Accred. no. 1761 Testing ISO/IEC 17025 Test report issued by an Accredited Testing Laboratory Document number: GFTL-22:001675 Uen Rev A Date of report: 2022-12-20 Testing laboratory: Ericsson EMF Research Laboratory Ericsson AB SE-164 80 Stockholm Sweden Company/Client: Rosita Jonsson EAB - Ericsson AB Isafjordsgatan 10 SE-164 80 Stockholm Sweden Tests performed by: Bo Xu Dates of tests: 2022-12-20 Manufacturer and market name(s) of device: Ericsson Radio 4490HP 44B5 44B12A C Testing has been performed in accordance with: FCC OET Bulletin 65 IEC 62232:2017 Test results: RF exposure compliance boundaries (exclusion zones) in conformity with FCC 47 CFR 1.1310 to be included in the Customer Product Information (CPI) for Ericsson Radio 4490HP 44B5 44B12A C. Additional information: Signature: Test Engineer ______________________________ Bo Xu Senior Researcher [email protected] Tel: +46 725931384 Quality Manager ___________________ Christer Törnevik Senior Expert – EMF and Health [email protected] Tel: +46 705863148 2 (11) GFTL-22:001675 Uen, Rev A, 2022-12-20 Summary of EMF Test Report 1 Equipment under test (EUT) Product name Radio 4490HP 44B5 44B12A C Product number KRC 161 981/3, KRC 161 981/31 Supported bands, Tx frequency range (MHz) and standards 2 B5 B12A 869 - 894 729 - 745 WCDMA/LTE/NR LTE/NR Duplexing technology FDD Antennas Product number 80010901 Tested mode(s) B5 + B12A (WCDMA/LTE/NR + LTE/NR) Results RF exposure compliance boundaries, outside of which the exposure is below the general public (GP) and occupational (O) exposure limits, are listed below. Dimensions of the box-shaped compliance boundary for general public (GP) and occupational (O) exposure for Radio 4490HP 44B5 44B12A C applicable in the US and markets employing FCC exposure limits. The compliance boundaries are determined for maximum nominal output power with 0.5 dB transmission loss and 0.6 dB output power tolerance included. Mode and output power for Radio 4490HP Dimensions of the box-shaped compliance boundary (m) Distance in front of antenna Width Height Distance behind antenna Band Standard 2 Maximum nominal output power from the radio IEC 62232 installation class GP O GP O GP O GP O B5 + B12A WCDMA/LTE/ NR + LTE/NR 4 × 60 W + 4 × 60 W E+ 22.3 9.9 17.3 7.8 4.8 2.4 0.5 0.2 For the power levels specified in the table with tolerances added, and the upward rounding of compliance boundary dimensions to the nearest decimeter, the specified results are conservative. 1 This page contains a summary of the test results. The full report provides a complete description of all test details and results. 2 If the radio supports NB-IoT, the distances are the same. 3 (11) GFTL-22:001675 Uen, Rev A, 2022-12-20 1 General information The test results presented in this report define compliance boundaries for Radio 4490HP 44B5 44B12A C. Outside of these compliance boundaries, the radio frequency (RF) exposure levels are below the limits specified by the Federal Communications Commission (FCC) [1]. The tests were performed by calculations in accordance with the Ericsson RF exposure calculation procedure for base stations [2], which is in conformity with the FCC OET Bulletin 65 [3] and IEC 62232:2017 [4]. It should be noted that the test results presented in this test report are valid for the frequency range specified in Table 1, for the antenna properties specified in Table 2, and for the power level, power tolerance, and transmission loss specified in Table 3. These data as well as the applied antenna pattern files were supplied by the client and may affect the validity of the results. Proposed EMF health and safety information for inclusion in the Customer Product Information (CPI) is provided in Appendices A, B and C. 2 Equipment under test Table 1 and Table 2 below summarize the technical data for the equipment under test (EUT) and the properties of the antenna. Table 3 lists the maximum nominal output power from the radio unit (total peak power from all antenna branches) and the total time-averaged power delivered to the antenna for the specified configuration. The total time-averaged power delivered to the antenna includes transmission loss and output power tolerance. The EUT related data in Tables 1-3 were supplied by the client. Table 1 Technical data for the EUT. Product name and product number Radio 4490HP 44B5 44B12A C KRC 161 981/3, KRC 161 981/31 Supported bands, Tx frequency range (MHz), and standards 2 B5 B12A 869 - 894 729 - 745 WCDMA/LTE/NR LTE/NR Duplexing technology FDD Exposure environment General public, Occupational IEC 62232 installation class 3 E+ Table 2 Properties of the antenna. Product number 80010901 Type Macro cell, directional, 4 Tx (2 columns, X polarized) Tested band and frequency range (MHz) B5 B12A 869 - 894 729 - 745 Gain (dBi) 4 15.9 Electrical tilt angle (degree) 2° Number of dual-polarized elements per column and element interspacing distance (mm) 7 250 Dimensions, 푯×푾×푫 (mm) 1999 × 508 × 175 Table 3 Maximum nominal output power and total time-averaged power including transmission loss and output power tolerance for EUT. Band Standard Maximum nominal output power from the radio Transmission loss (dB) Power tolerance (dB) Total time-averaged power delivered to antenna (dBm/W) B5 + B12A WCDMA/LTE/NR + LTE/NR 4 × 60 W + 4 × 60 W 0.5 0.6 56.9 / 491.2 3 The stated IEC 62232 installation class was determined based on the total EIRP without power tolerance included and considering the transmission loss. The total EIRP was obtained using the antenna patterns provided by the client. 4 Maximum gain per antenna port obtained using the antenna patterns provided by the antenna manufacturers. 4 (11) GFTL-22:001675 Uen, Rev A, 2022-12-20 3 Exposure conditions The EUT is intended to be used outdoor and installed on poles, walls, masts, towers, or similar structures making it possible to ensure…

Text truncated - open the document above for the full version.

Test report No. 2300576STO-101 Page 2 (44) Intertek Semko AB Torshamnsgatan 43, Box 1103, SE-164 22 Kista, Sweden www.intertek.se Version 2.0 Revision History Test report number Date Description Changes 2300576STO-101 April 5, 2023 First release Test report No. 2300576STO-101 Page 3 (44) Intertek Semko AB Torshamnsgatan 43, Box 1103, SE-164 22 Kista, Sweden www.intertek.se Version 2.0 CONTENTS Page 1. Client Information ............................................................................................................... 5 2. Equipment under test (EUT) ............................................................................................... 5 2.1 Identification of the EUT ........................................................................................... 5 2.2 Description of the EUT ............................................................................................. 6 2.3 Test setup- block diagram ........................................................................................ 6 2.4 External cables connected to the EUT ..................................................................... 6 2.5 Auxiliary equipment (AE) .......................................................................................... 7 2.6 Opinions and interpretations .................................................................................... 7 2.7 Decision rule ............................................................................................................ 7 3. Test Specifications ............................................................................................................. 8 3.1 Standards ................................................................................................................. 8 3.2 Additions, deviations and exclusions from standards and accreditation ................. 8 3.3 Test site .................................................................................................................... 8 3.4 Mode of operation during the test ............................................................................ 9 3.5 Compliance ............................................................................................................ 10 4. Test Summary .................................................................................................................. 11 5. Radiated rf Emission in the frequency-range 30 MHz– 1 – 9 GHz .................................. 12 5.1 Test set-up and test procedure .............................................................................. 12 5.2 Measurement uncertainty ....................................................................................... 13 5.3 Test results, 30 – 1000 MHz, configuration 1: 1 NR B5 BW25MHz ...................... 14 5.4 Test results, 30 – 1000 MHz, configuration 2: 1 NR B12A Bot BW15MHz ........... 14 5.5 Test results, 30 – 1000 MHz, configuration 3: 1 NR B12A Mid BW15MHz ........... 15 5.6 Test results, 30 – 1000 MHz, configuration 4: 1 NR B12A Top BW15MHz ........... 15 5.7 Test results, 30 – 1000 MHz, configuration 5: 1 LTE B5 Bot BW5MHz ................ 16 5.8 Test results, 30 – 1000 MHz, configuration 6: 1 LTE B5 Mid BW5MHz ................ 16 5.9 Test results, 30 – 1000 MHz, configuration 7: 1 LTE B5 Top BW5MHz ................ 17 5.10 Test results, 30 – 1000 MHz, configuration 8: 1 LTE B12 Bot BW15MHz ............ 17 5.11 Test results, 30 – 1000 MHz, configuration 9: 1 LTE B12 Mid BW15MHz ............ 18 5.12 Test results, 30 – 1000 MHz, configuration 10: 1 LTE B12 Top BW15MHz .......... 18 5.13 Test results, 30 – 1000 MHz, configuration 11: 2 NR B5 BW5MHz ...................... 19 5.14 Test results, 30 – 1000 MHz, configuration 12: 2 NR B12 BW5MHz .................... 19 5.15 Test results, 30 – 1000 MHz, configuration 13: 2 LTE B5 BW5MHz ..................... 20 5.16 Test results, 30 – 1000 MHz, configuration 14: 2 LTE B12 BW5MHz ................... 20 5.17 Test results, 30 – 1000 MHz, configuration 15: 5 NR B5 BW5MHz ...................... 21 5.18 Test results, 30 – 1000 MHz, configuration 16: 3 NR B12 BW5MHz .................... 21 5.19 Test results, 30 – 1000 MHz, configuration 17: 5 LTE B5 BW5MHz ..................... 22 5.20 Test results, 30 – 1000 MHz, configuration 18: 3 LTE B12 BW5MHz ................... 22 5.21 Test results, 30 – 1000 MHz, configuration 19: 1 NR BW15MHz 1 LTE BW5MHz B5 23 5.22 Test results, 30 – 1000 MHz, configuration 20: 1 NR BW15MHz 2 LTE BW5MHz B5 23 5.23 Test results, 30 – 1000 MHz, configuration 21: 1 NR BW10MHz 1 LTE BW5MHz B12 24 5.24 Test results, 30 – 1000 MHz, configuration 22: 1 NR BW5MHz 2 LTE BW5MHz B12 24 5.25 Test results, 30 – 1000 MHz, configuration 23: 1 NR BW25MHz B5 1 LTE BW5MHz B12 25 5.26 Test results, 30 – 1000 MHz, configuration 24: 1 NR BW15MHz B5 1 LTE BW5MHz B5 1 NR BW5MHz B12 1 LTE BW5MHz B12 ......................................................................... 25 5.27 Test results, 30 – 1000 MHz, configuration 25: 1 NR NB-IoT BW10MHz B5 1 NR NB-IoT BW15MHz B12 BOT ....................................................................................................... 26 5.28 Test results, 30 – 1000 MHz, configuration 26: 1 NR NB-IoT BW10MHz B5 1 NR NB-IoT BW15MHz B12 MID ........................................................................................................ 26 5.29 Test results, 30 – 1000 MHz, configuration 27: 1 NR NB-IoT BW10MHz B5 1 NR NB-IoT BW15MHz B12 TOP ....................................................................................................... 27 Test report No. 2300576STO-101 Page 4 (44) Intertek Semko AB Torshamnsgatan 43, Box 1103, SE-164 22 Kista, Sweden www.intertek.se Version 2.0 5.30 Test results, 30 – 1000 MHz, configuration 28: 1 LTE NB-IoT BW10MHz B5 1 LTE NB-IoT BW10MHz B12 BOT ....................................................................................................... 27 5.31 Test results, 30 – 1000 MHz, config…

Text truncated - open the document above for the full version.

REPORT Issued by an Accredited Testing Laboratory Contact person Date Reference Page Tomas Isbring 2023-03-21 P118379-F15 1 (18) Division Safety and Transport +46 10 516 59 16 tomas.isbr…

Text truncated - open the document above for the full version.