TA8AKRC161983-3Multi-standard remote radio

Attestation Statement Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked ERAWALA Lars Wallin Document Number Revision Date Reference A 2023-03-01 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Section 2.911(d)(7) of the FCC Rules Designation of Contact for Service of Process Ericsson AB (“Applicant”) hereby designates Ericsson Inc (“Agent”) as its agent for service of process under 47 CFR Section 2.911(d)(7). Agent provides its consent and acknowledges its obligation to accept service of process at the U.S.-based address listed below for matters relating to the equipment associated with this application. The email address of Agent also is listed below. Applicant acknowledges and accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has terminated all marketing and importation of the equipment associated with this application or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. On Behalf of Applicant: _______________________________ Peter Moberg Head of PEU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden FRN: 0015544414 On Behalf of Agent: _______________________________ Paul Challoner VP Network Product Solutions Ericsson Inc 6300 Legacy Drive Plano TX 75024 Email: [email protected] FRN: 0033444811

Attestation Statement Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked EDAVBOL David Bolzon Document Number Revision Date Reference A 2023-07-17 Radio 4890HP To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: TA8AKRC161983-3 Attestations for Sections 2.911(d)(5)(i) and 2.911(d)(5)(ii) of the FCC Rules Attestation Under 47 CFR § 2.911(d)(5)(i) Ericsson AB certifies that, as of the date of the filing of this application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to Section 2.903 of the FCC rules. Attestation Under 47 CFR § 2.911(d)(5)(ii) Ericsson AB certifies that, as of the date of the filing of the application, it is not identified on the Covered List established pursuant to Section 1.50002 of the FCC rules as an entity producing “covered” equipment. Ericsson AB, By: _______________________________ Peter Moberg Head PEU Radio Ericsson AB Torshamnsgatan 23 SE-16480 Stockholm, Sweden

Ericsson Confidential 1 (1) Prepared (also subject responsible if other) No. EDAVBOL [David Bolzon] TA8AKRC161983-3 Approved Checked Date Rev Reference 2023-07-14 A FRN: 0013476155 FRN: 0013476155 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 14 July 2023 FCC ID: TA8AKRC161983-3 Model: Radio 4890HP 48B2/B25 48B66 M01 Product Number: KRC 161 983/31 Attn: Director of Certification Authority to Act as Agent FCC On behalf of Ericsson AB / Ericsson Canada, I appoint Spencer Zhong of Nemko Canada, Inc, at 303 River Road, Ottawa, Ontario to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Ericsson AB, Isafjordsgatan 10, SE-164 80 Stockholm Sweden. Dated this 14 th Day of July 2023 By: David Bolzon Signature Printed Agency agreement expiration date: 14 July 2024 Title: SR. RF Engineer Telephone: +1 613 219-5892 Applicant: Ericsson AB DAVID BOLZON Sr. RF Engineer – Regulatory Approvals Ericsson Canada Inc. 349 Terry Fox Drive Ottawa, On, K2K 2V6, Canada Mobile: +1.613.219.5892 Email: [email protected]

FCC authorization letter Confidentiality Class External Confidentiality Label Document Type Page Ericsson Internal 1 (1) Prepared By (Subject Responsible) Approved By (Document Responsible) Checked ERAWALA Lars Wallin Document Number Revision Date Reference 1/0133-600/FEA2926603/14 L 2023-02-28 I, the undersigned, hereby entrust Lars Wallin Bertil Johansson Niklas Roos Audun Helle Afrah Ali Sadiq Hans Östgaard BNEW Hardware Engineering PEU Radio Torshamnsgatan 23 SE-164 80 Stockholm Sweden David Bolzon Denis Lalonde Dave Pampararo Gavin Gan BNEW Hardware Engineering PEU Radio 349 Terry Fox Drive Ottawa, K2K 2V 6 Canada Xiaoying Jiang Weiqun Chen Jieying Zhu Hua Yang Yuejun Ma Zheng Zhao Tingting Wang BNEW Hardware Engineering PEU Radio No.5 Lize East Street, Chaoyang District 100102 Beijing China Xiao Hu Z Ling Pan L Ting Chen BNEW Hardware Engineering PEU Radio No.1366 Tianfu Avenue 610041 Chengdu China to act as my representatives in following: To make the necessary applications for FCC equipment certifications. ................................................................ (Signature) Peter Moberg Head PEU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden

1 (1) Prepared (also subject responsible if other) No. EDAVBOL [David Bolzon] TA8AKRC161983-3 / 287AB-AS1619833 Approved Checked Date Rev Reference 2023-07-14 A Radio 4890HP Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046-1609 14 July 2023 FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 HVIN: AS1619833 Subject: Request for Permanent Confidentiality To Whom It May Concern: Pursuant to Sections 0.457(d) and 0.459 of the FCC Rules, We, Ericsson Canada / Ericsson AB, hereby request the Exhibits/Items listed below be withheld from public inspection or disclosure. This is based on the following reasons: This product is intended for use in an Ericsson Radio Base Station (BS) designed and built to state of the art technical specification and implemented with innovative solutions for a highly competitive market. Competition in this market is very intense and therefor the necessity for confidentiality is essential to protect Ericsson IP and trade secrets. Ericsson AB / Ericsson Canada confidential exhibits / documentation contain Ericsson company proprietary information (or that of our suppliers and contactors), in addition to trade secrets and proprietary information that are not intended for public disclosure. The confidential exhibits in this application are provided exclusively for the radio authorization submission and approval process and therefore need to be protected from public disclosure. Ericsson AB / Ericsson Canada has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading-edge technology and solutions developed and / or implemented by Ericsson, with actual and patents pending. The Confidential Exhibits listed below contain highly technical and confidential information about our product and are only available to trained and authorized service personnel. This equipment is not available to be sold to the general public, (nor is it a consumer product) and can only be accessed and installed by trained service personnel under NDA (Non-Disclosure Agreement) with Ericsson. In addition, this product is only serviceable by the licensee or his designated / authorized technicians. As per Exhibit 13 “Commercial in Confidence” all sales of this product are under NDA, including third party sales. Confidential product information can be found in, but not necessarily limited to, internal photos, block diagrams, schematics diagrams, and parts lists as well as certain documents, such as the user’s manuals. Internal photographs contain product details not disclosed to or accessible by the general public. Under Special Circumstances, we (Ericsson) therefore request the inclusion of Exhibit 09 Internal Photographs and Exhibit 08 User Manuals to be held for Long Term Confidentiality based on the above justification. Product: KRC 161 983/31 Radio 4890HP 48B2/B25 48B66 M01- Long Term Confidentiality List: Exhibit 04 Block Dia gram Exhibit 05 Schematics Exhibit 08 User Manuals Exhibit 09 Internal Photo graphs Exhibit 10 Bill of Materials Exhibit 12 Operational and Technical Descriptions Should additional information be required, please contact the undersigned: DAVID BOLZON Sr. Engineer - Regulatory Approvals FCC Registration Number (FRN) 0013476155 IC: 287AB / IC: 11635A Ericsson Canada Inc. 349 Terry Fox Drive Ottawa, On, K2K 2V6, Canada Mobile: +1.613.219.5892 Email: [email protected]

1 (1) Prepared (also subject responsible if other) No. EDAVBOL [David Bolzon] TA8AKRC161983-3 / 287AB-AS1619833 Approved Checked Date Rev Reference 2023-07-14 A Radio 4890HP Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046-1609 14 July 2023 FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 HVIN: AS1619833 Product: KRC 161 983/31 FCC Reference: CFR 47 Part 2, Part 24, Part 27 Subject: Request for FCC Certification Ericsson AB / Ericsson Canada Inc. formally request Certification for the above referenced product. Transmission Bandwidth Configurations: Band 2/25 DL 1930 – 1995MHz: LTE: 5, 10, 15, 20MHz, (LTE+NB-IoT (IB): 5MHz, LTE+NB-IoT (IB, GB) 10, 15, 20MHz) NR: 5, 10, 15, 20, 25, 30, 40MHz Band 66 DL 2110 – 2200MHz: LTE: 5, 10, 15, 20MHz, (LTE+NB-IoT (IB): 5MHz, LTE+NB-IoT (IB, GB) 10, 15, 20MHz) NR: 5, 10, 15, 20, 25, 30, 40MHz This Radio is designed for SC/MC Cellular Communications supporting SRO/MRO for NR (New Radio) and LTE including LTE+NB-IoT (IB, GB) operations. The Radio is a Dual Band FDD transceiver operating in Band 2 / Band 25 and Band 66. Band 2/25 Band 66 TX (DL): 1930 - 1995 MHz RX (UL): 1850 - 1915 MHz TX (DL): 2110 - 2200 MHz RX (UL): 1710 - 1780 MHz The Radio 4890HP 48B2/B25 48B66 M01 supports LTE/NR Channel Bandwidths of 5, 10, 15 and 20MHz with Modulation type QPSK, 16QAM, 64QAM and 256QAM. The Radio 4890HP is capable of operating in an RBS System supporting 3GPP MIMO/Spatial Multiplexing, Carrier Aggregation, ESS (Ericsson Spectrum Sharing) and NB-IoT (IB, GB) technologies. Dated this 14 th Day of July 2023 By: David Bolzon Si gnature Printed Applicant: Ericsson AB DAVID BOLZON Sr. RF Engineer – Regulatory Approvals Ericsson Canada Inc. 349 Terry Fox Drive Ottawa, On, K2K 2V6, Canada Mobile: +1.613.219.5892 Email: [email protected]

Ericsson Canada Proprietary Information Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 Restricted Use and Duplication FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 QRM Regulatory Compliance 17/07/2023 Page 1 of 4 Exhibit 03: External Photographs – Ericsson Confidential KRC 161 983/31: Photo Submission (External) Radio 4890HP 48B2/B25 48B66 M01 (Multi-Standard) FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 HVIN: AS1619833 Date: 09 June 2023 Author: Ericsson Canada File: Radio 4890HP External Photos ONFIDENTIAL INFORMATION RESTRICTED USE AND DUPLICATION © Ericsson Canada Inc. All Rights Reserved. The information contained in this document is the property of Ericsson Canada. Except as specifically authorized in writing by Ericsson, the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. Ericsson Canada Proprietary Information Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 Restricted Use and Duplication FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 QRM Regulatory Compliance 17/07/2023 Page 2 of 4 Figure 1: Radio 4890HP 48B2/B25 48B66 M01 Bottom / Connector View Figure 2: Radio 4890HP 48B2/B25 48B66 M01 Top / Handle View Ericsson Canada Proprietary Information Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 Restricted Use and Duplication FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 QRM Regulatory Compliance 17/07/2023 Page 3 of 4 Figure 3: Radio 4890HP 48B2/B25 48B66 M01 Front / Back (Mounting) View Ericsson Canada Proprietary Information Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 Restricted Use and Duplication FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 QRM Regulatory Compliance 17/07/2023 Page 4 of 4 Figure 4: Radio 4890HP 48B2/B25 48B66 M01 Side View Figure 5: Radio 4890HP 48B2/B25 48B66 M01 Product Labels

Ericsson Canada Proprietary Information Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 Restricted Use and Duplication FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 QRM Regulatory Compliance 17/07/2023 Page 1 of 2 Exhibit 01: ID Label KRC 161 983/31: Product ID / Authorization Radio 4890HP 48B2/B25 48B66 M01 (Multi-Standard) FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 HVIN: AS1619833 Date: 14 July 2023 Author: Ericsson Canada File: Radio 4890HP 48B25 48B66 Legal Overlay CONFIDENTIAL INFORMATION RESTRICTED USE AND DUPLICATION © Ericsson Canada Inc. All Rights Reserved. The information contained in this document is the property of Ericsson Canada. Except as specifically authorized in writing by Ericsson, the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. Ericsson Canada Proprietary Information Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 Restricted Use and Duplication FCC ID: TA8AKRC161983-3 IC: 287AB-AS1619833 QRM Regulatory Compliance 17/07/2023 Page 2 of 2 Regulatory ID Label

Nemko North America, Inc. 303 River Road Ottawa, ON K1V 1H2 Canada RF Electromagnetic Field Exposure FCC ID: TA8AKRC161983-3 Model: AS1619833 RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Rule Part 1.1307(b)(3). Section 2.11 of the operating description exhibit (Radio Description) provides compliance boundaries for Radio 4890HP 48B2/B25 48B66 M01. Outside of these compliance boundaries, the radio frequency (RF) exposure levels are below the limits specified in FCC Rules. Signed: Printed name: Spencer Zhong Title Department Manager, IAS Date: 7/14/2023

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa/Almonte); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 27 and RSS-139.docx; Date: Jul 2017 C h o o s e S c a n d i n a v i a n t r u s t Radio Test report – Radio 4890HP 48B2/25 48B66 M01 Report ID Project ID REP013195 PRJ0038757 Applicant: Ericsson Canada Inc. Product name: Model (PMN): Part number: Radio Unit Radio 4890HP 48B2/B25 48B66 M01 KRC 161 983/31 FCC Identifier ISED certification number: HVIN: TA8AKRC161983-3 IC: 287AB-AS1619833 AS1619833 Requirements/Summary: Standard Environmental phenomenon Compliance FCC 47 CFR Part 27 Miscellaneous wireless communications services Yes FCC 47 CFR Part 24, Subpart E Broadband Personal Communications Services (PCS) Yes RSS-133 Issue 6 A1, Jan 18, 2018 2 GHz Personal Communications Services Yes RSS-139 Issue 4, September 29, 2022 Advanced Wireless Services (AWS) Equipment Operating in the Bands 1710–1780 MHz and 2110–2200 MHz Yes Date of issue: July 25, 2023 Nimish Kapoor, EMC/RF Test Specialist Tested by Signature Predrag Golic, EMC/RF Test Specialist Tested by Signature David Duchesne, Senior EMC/Wireless Specialist Reviewed by Signature Report ID: REP013195 Page 2 of 201 Two test locations Company name Nemko Canada Inc. Address 303 River Road 349 Terry Fox City Ottawa Ottawa Province Ontario Ontario Postal code K1V 1H2 K2K 2V6 Country Canada Canada Telephone +1 613 737 9680 +1 613 963 8000 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Site number FCC test site registration number: CA2040, IC: 2040A-4 (3 m semi anechoic chamber) Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report ID: REP013195 Page 3 of 201 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test method ............................................................................................................................................................................................................. 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 Testing location ........................................................................................................................................................................................................ 5 2.2 Testing period .......................................................................................................................................................................................................... 5 2.3 Sample information .................................................................................................................................................................................................. 5 2.4 FCC Part 27/24 test results ....................................................................................................................................................................................... 6 2.5 RSS-133/139 test results .......................................................................................................................................................................................... 6 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 7 3.1 EUT information ...................................................................................................................................…

Text truncated - open the document above for the full version.

Section 8 Testing data Test name Transmitter output power (EIRP) and antenna height (Band 2/25) Specification FCC Part 24 and RSS-133 Issue 6 Report ID: REP013195 Page 76 of 201 Figure 8.2-33: CCDF sample plot, LTE Figure 8.2-34: CCDF sample plot, NR Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 77 of 201 8.3 Spurious emissions at RF antenna connector (Band 66) 8.3.1 Definitions and limits FCC §27.53: (h) AWS emission limits (1) General protection levels. Except as otherwise specified below, for operations in the 1695–1710 MHz, 1710–1755 MHz, 1755–1780 MHz, 1915–1920 MHz, 1995–2000 MHz, 2000–2020 MHz, 2110–2155 MHz, 2155–2180 MHz, and 2180–2200 bands, the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log 10 (P) dB. (3) Measurement procedure. (i) Compliance with this provision is based on the use of measurement instrumentation employing a resolution bandwidth of 1 megahertz or greater. However, in the 1-megahertz bands immediately outside and adjacent to the licensee's frequency block, a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. (ii) When measuring the emission limits, the nominal carrier frequency shall be adjusted as close to the licensee's frequency block edges, both upper and lower, as the design permits. (iii) The measurements of emission power can be expressed in peak or average values, provided they are expressed in the same parameters as the transmitter power. RSS-139, Section 5.6: Unwanted emissions shall be measured in terms of average values. For all equipment, the TRP or total conducted power (sum of conducted power across all antenna connectors) of the unwanted emissions outside the frequency block or frequency block group shall not exceed the limits shown in table below: Table 8.3-1: Unwanted emissions limits Offset from the edge of the frequency block or frequency group Unwanted emission limits 1 MHz -13 dBm/(1% of OB*) > 1 MHz -13 dBm/MHz Notes: *OB is the occupied bandwidth In addition to complying with the above limits, equipment operating in the band 2180-2200 MHz may require additional filtering (see SRSP-519). 8.3.2 Test summary Test date June 26 and 27, 2023 Test engineer Nimish Kapoor 8.3.3 Observations, settings and special notes − The spectrum was searched from 30 MHz to the 10 th harmonic. − All measurements were performed using an average (RMS) detector per ANSI C63.26 Paragraph 5.7.2 method. − Limit line (43 + 10 log 10 (P) or −13 dBm) was adjusted for MIMO operation by 6 dB*: −13 dBm – 6 dB = −19 dBm *MIMO correction factor for 4 antenna ports: 10 × Log 10 (4) = 6 dB − RBW 1 MHz, VBW was wider than RBW. Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 78 of 201 8.3.4 Test data Figure 8.3-1: Conducted spurious emissions of LTE 5 MHz low channel, single carrier operation Figure 8.3-2: Conducted spurious emissions of LTE 5 MHz mid channel, single carrier operation Figure 8.3-3: Conducted spurious emissions of LTE 5 MHz top channel, single carrier operation Figure 8.3-4: Conducted spurious emissions of LTE 10 MHz low channel, single carrier operation Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 79 of 201 Test data, continued Figure 8.3-5: Conducted spurious emissions of LTE 10 MHz mid channel, single carrier operation Figure 8.3-6: Conducted spurious emissions of LTE 10 MHz top channel, single carrier operation Figure 8.3-7: Conducted spurious emissions of LTE 15 MHz low channel, single carrier operation Figure 8.3-8: Conducted spurious emissions of LTE 15 MHz mid channel, single carrier operation Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 80 of 201 Test data, continued Figure 8.3-9: Conducted spurious emissions of LTE 15 MHz top channel, single carrier operation Figure 8.3-10: Conducted spurious emissions of LTE 20 MHz low channel, single carrier Figure 8.3-11: Conducted spurious emissions of LTE 20 MHz mid channel, single carrier operation Figure 8.3-12: Conducted spurious emissions of LTE 20 MHz top channel, single carrier operation Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 81 of 201 Test data, continued Figure 8.3-13: Conducted spurious emissions of LTE with IoT1 5 MHz low channel, single carrier operation Figure 8.3-14: Conducted spurious emissions of LTE with IoT1 5 MHz mid channel, single carrier operation Figure 8.3-15: Conducted spurious emissions of LTE with IoT1 5 MHz top channel, single carrier operation Figure 8.3-16: Conducted spurious emissions of LTE with IoT2 5 MHz low channel, single carrier operation Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 82 of 201 Test data, continued Figure 8.3-17: Conducted spurious emissions of LTE with IoT2 5 MHz mid channel, single carrier operation Figure 8.3-18: Conducted spurious emissions of LTE with IoT2 5 MHz top channel, single carrier operation Figure 8.3-19: Conducted spurious emissions of LTE with GB 10 MHz low channel, single carrier operation Figure 8.3-20: Conducted spurious emissions of LTE with GB 10 MHz mid channel,…

Text truncated - open the document above for the full version.

Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 101 of 201 Test data, continued On the plots below the measured Channel Power value in the “Total Channel Power” column must be −19 dBm and lower. Figure 8.3-95: Conducted emission at the lower band edge Figure 8.3-96: Conducted emission 1 MHz away from the lower band edge Frequency: 2110 MHz Mode: Single-carrier operation Frequency: 2109 MHz Mode: Single-carrier operation Meas. BW: 1% of EBW Tech.: LTE 5 MHz with IB (IoT1) Meas. BW: 1 MHz Tech.: LTE 5 MHz with IB (IoT1) Limit: −19 dBm/50 kHz Notes: None Limit: −19 dBm/MHz Notes: None Figure 8.3-97: Conducted emission at the upper band edge Figure 8.3-98: Conducted emission 1 MHz away from the upper band edge Frequency: 2200 MHz Mode: Single-carrier operation Frequency: 2201 MHz Mode: Single-carrier operation Meas. BW: 1% of EBW Tech.: LTE 5 MHz with IB (IoT1) Meas. BW: 1 MHz Tech.: LTE 5 MHz with IB (IoT1) Limit: −19 dBm/50 kHz Notes: None Limit: −19 dBm/MHz Notes: None Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 102 of 201 Test data, continued On the plots below the measured Channel Power value in the “Total Channel Power” column must be −19 dBm and lower. Figure 8.3-99: Conducted emission at the lower band edge Figure 8.3-100: Conducted emission 1 MHz away from the lower band edge Frequency: 2110 MHz Mode: Single-carrier operation Frequency: 2109 MHz Mode: Single-carrier operation Meas. BW: 1% of EBW Tech.: LTE 5 MHz with IB (IoT2) Meas. BW: 1 MHz Tech.: LTE 5 MHz with IB (IoT2) Limit: −19 dBm/50 kHz Notes: None Limit: −19 dBm/MHz Notes: None Figure 8.3-101: Conducted emission at the upper band edge Figure 8.3-102: Conducted emission 1 MHz away from the upper band edge Frequency: 2200 MHz Mode: Single-carrier operation Frequency: 2201 MHz Mode: Single-carrier operation Meas. BW: 1% of EBW Tech.: LTE 5 MHz with IB (IoT2) Meas. BW: 1 MHz Tech.: LTE 5 MHz with IB (IoT2) Limit: −19 dBm/50 kHz Notes: None Limit: −19 dBm/MHz Notes: None Section 8 Testing data Test name Spurious emissions at RF antenna connector (Band 66) Specification FCC Part 27, RSS-139, Issue 4 Report ID: REP013195 Page 103 of 201 Test data, continued On the plots below the measured Channel Power value in the “Total Channel Power” column must be −19 dBm and lower. Figure 8.3-103: Conducted emission at the lower band edge Figure 8.3-104: Conducted emission 1 MHz away from the lower band edge Frequency: 2110 MHz Mo…

Text truncated - open the document above for the full version.