TA8AKRY901516-1Remote Radio Unit

Page 1 (1) Attending to this matter, name, telephone Date Rev Our Reference BNEW DNEW RA RPSE1 RA2, Adam Sheng, +46 73 0958256 2020-12-04 K 1/0133-600/FEA2926603/14 Uen Ericsson AB Mail Office address Telephone V.A.T. No. SE556056625801 SE-164 80 Stockholm Torshamnsgatan 23 Nat 010 - 719 00 00 Reg. No: 556056-6258 SWEDEN KISTA Int + 46 10 719 00 00 FCC authorization letter I, the undersigned, hereby entrust Lars Wallin David Bolzon Xiaoying Jiang Linda Grell Denis Lalonde Hua Yang Bertil Johansson Ericsson Canada INC Wei Qun Chen Niklas Roos BNEW DNEW Tinting Wang Audun Helle PDU Radio Ericsson (China) Communications Co.Ltd. Ericsson AB 349 Terry Fox Drive BNEW DNEW BNEW DNEW Ottawa, K2K 2V 6 Canada PDU Radio PDU Radio No.5 Lize East Street, Chaoyang District Torshamnsgatan 23 100102 Beijing, China SE-164 80 Stockholm, Sweden Mihai Simon Xiao Hu Z Ericsson AB Ling Pan L BNEW DNEW Ericsson (China) Communications Co.Ltd. PDU Radio BNEW DNEW Lindholmspiren 11 PDU Radio SE-417 56 Gothenburg No.1366 Tianfu Avenue Sweden 610041 Chengdu, China to act as my representatives in the following: To make the necessary applications for FCC equipment certifications. ....................................... (Signature) Igor Tasevski Head PDU Radio Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm, Sweden DocuSign Envelope ID: B06C5A4E-3F9D-474E-80A3-34C1ADEBFC11 07 december 2020 | 21:19:17 CET

1 (2) Prepared (also subject responsible if other) No. Denis Lalonde TA8AKRY901516-1 Approved Checked Date Rev Reference May 26, 2022 PA1 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Attention: Equipment Authorization Branch TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, Massachusetts United States, 01880 26 May 2022 FCC ID: TA8AKRY901516-1 Subject: Request for Confidentiality To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission Rules, We, Ericsson Canada / Ericsson AB, hereby requests the Exhibits/Items listed below be withheld from public inspection or disclosure. This is based on the following reasons: This product is intended for use in an Ericsson Radio Base Station (BS) designed and built to state of the art technical specification and implemented with innovative solutions for a highly competitive market. Competition in this market is very intense and therefore the necessity for confidentiality is essential to protect Ericsson IP and trade secrets. Ericsson AB / Ericsson Canada confidential exhibits / documentation contains Ericsson company proprietary information (or that of our suppliers and contractors), in addition to trade secrets and proprietary information that are not intended for public disclosure. The confidential exhibits in this application are provided exclusively for the radio authorization submission and approval process and therefore need to be protected from public disclosure. Ericsson AB / Ericsson Canada has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology and solutions developed and / or implemented by Ericsson. The Confidential Exhibits listed below contain highly technical and confidential information about our product and are only available to trained and authorized service personnel. This equipment is not available to be sold to the general public, (nor is it a consumer product) and can only be accessed and installed by trained service personnel under NDA (Non-Disclosure Agreement) with Ericsson. In addition, this product is installed in restricted access areas and is only serviceable by the licensee or his designated technicians. Confidential product information can be found in, but not necessarily limited to, internal photos, block diagrams, schematics diagrams, and parts lists as well as certain documents, such as the user’s manuals. 2 (2) Prepared (also subject responsible if other) No. Denis Lalonde TA8AKRY901516-1 Approved Checked Date Rev Reference May 26, 2022 PA1 KRY 901 516/1 DOT 4459 B48 - Request for confidentiality list: • Exhibit 04 Block diagram • Exhibit 05 Schematics • Exhibit 08 User Manuals • Exhibit 09 Internal Photographs • Exhibit 10 Bill of Materials • Exhibit 12 Operational and Technical Descriptions Should additional information be required, please contact the undersigned: ..................................................................... Denis Lalonde Team Leader, RA Verification FCC Registration Number (FRN) 0024080715 Ericsson Canada Inc. 349 Terry Fox Drive Ottawa, On, K2K 2V6, Canada Mobile: +1-613-790-2901 Email: [email protected]

COMMERCIAL IN CONFIDENCE EXHIBIT 13 1 (1) Prepared (also subject responsible if other) No. Denis Lalonde EMC NDA 12.08.14 Approved Checked Date Rev Reference May 26, 2022 PA1 26 May 2022 FCCID: TA8AKRY901516-1 NDA Confidentiality Clause used with Ericsson customers Confidentiality: Each party agrees that all confidential documents, work product and information (including all computer code, internal photographs of products, block diagrams, schematic diagrams, technical and/or user manuals, related materials, and the existence of this Agreement) received or otherwise obtained from the other party pursuant to this Agreement, whether before or after the Effective Date, will be, and will be deemed to have been, received in confidence and will be used only for the purpose of carrying out the obligations of, or as otherwise contemplated by, this Agreement. In addition, each party agrees that public access to all confidential equipment supplied will be restricted either by installation of the equipment in a restricted area or by physically securing the equipment by other means, including, but not limited to, using a key-lock that can only be opened by authorized personnel. Without the other party’s prior written consent, neither party may disclose any such information to any third party or grant access to the confidential equipment to any unauthorized person, and each party will disclose such information only to such of its officers, employees and agents that have a need to know such information for the purposes contemplated hereby. However, the provisions of this Section will not apply to any such information that (i) is or becomes generally available to the public without the fault or negligence of either party, (ii) is already in the possession of the receiving party without being subject to another confidentiality obligation, (iii) is or becomes available to the receiving party on a non-confidential basis from a source other than the disclosing party; provided that such source is not bound by a confidentiality obligation of the disclosing party, (iv) is required to be disclosed pursuant to an arbitration proceeding conducted in accordance with this Agreement, or (v) is required to be disclosed pursuant to a requirement of any governmental authority or any statute, rule or regulation; provided that the party required to disclose such information of the other party provide to the other party notice of such requirement of any such disclosure and cooperates with the other party to prevent or restrict any such disclosure to the extent allowed by applicable law. Denis Lalonde Regulatory Approvals Verification Ericsson Canada Inc. 349 Terry Fox Drive Ottawa, On, K2K 2V6, Canada Phone: +1-613-963-6496 Mobile: +1-613-790-2901

Ericsson Canada Proprietary Information Dot 4459 B48 Restricted Use and Duplication FCCID: TA8AKRY901516-1 EMC/LB/F Regulatory Compliance 25/05/2022 Page 1 of 3 Exhibit 3: External Photographs KRY 901 516/1 Photo Submission (External) Dot 4459 B48 FCCID: TA8AKRY901516-1 Date: 25 May 2022 Author: Ericsson EMC CONFIDENTIAL INFORMATION RESTRICTED USE AND DUPLICATION © Ericsson Canada Inc. All Rights Reserved. The information contained in this document is the property of Ericsson Canada. Except as specifically authorized in writing by Ericsson, the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. Ericsson Canada Proprietary Information Dot 4459 B48 Restricted Use and Duplication FCCID: TA8AKRY901516-1 EMC/LB/F Regulatory Compliance 25/05/2022 Page 2 of 3 Figure 1: Dot 4459 B48 Top (Radome) View Figure 2: Dot 4459 B48 Bottom View Ericsson Canada Proprietary Information Dot 4459 B48 Restricted Use and Duplication FCCID: TA8AKRY901516-1 EMC/LB/F Regulatory Compliance 25/05/2022 Page 3 of 3 Figure 3: Dot 4459 B48 Side View

Ericsson Canada Confidential Exhibit 01: Product Identification Label KRY 901 516/1 25 May 2022 Figure 1: Dot 4459 B48 Label Detail - The text printed shall be: FCC ID: TA8AKRY901516-1

1 (9) GFTL-22:000831 Uen, Rev B, 2022-06-03 © Telefonaktiebolaget LM Ericsson AB. This report shall not be reproduced except in full, without written approval of the laboratory. EMF Test Report: Ericsson Dot 4459/4469 B48 (FCC) Accred. no. 1761 Testing ISO/IEC 17025 Test report issued by an Accredited Testing Laboratory Document number: GFTL-22:000831 Uen, Rev B Date of report: 2022-06-03 Testing laboratory: Ericsson EMF Research Laboratory Ericsson AB SE-164 80 Stockholm Sweden Company/Client: Denis Lalonde Ericsson Canada 349 Terry Fox Drive Ottawa ON K2K 2V6 Canada Tests performed by: Davide Colombi Dates of tests: 2022-06-03 (Rev A) Manufacturer and market name(s) of device: Ericsson Dot 4459/4469 B48 Testing has been performed in accordance with: FCC OET Bulletin 65, KDB447498 D04 v01 Test results: Minimum separation distance for which the RF EMF exposure complies with the limits in FCC 47 CFR 1.1310 to be included in the Customer Product Information (CPI) for Ericsson Dot 4459/4469 B48. Additional information: Testing was conducted for mobile exposure conditions according to KDB447498 D04. Signature: Test Engineer _________________________ Davide Colombi Master Researcher [email protected] Tel: +46767602089 Quality Manager ___________________________ Christer Törnevik Senior Expert – EMF and Health [email protected] Tel: +46705863148 2 (9) GFTL-22:000831 Uen, Rev B, 2022-06-03 1 Summary of EMF Test Report 1 Equipment under test (EUT) Product name Ericsson Dot 4459 B48 (internal antennas) Ericsson Dot 4469 B48 (external antennas) Product number KRY 901 516/1 KRY 901 516/2 Supported bands, Tx frequency range (MHz), and standards B48 3550–3700 NR TDD, LTE TDD Exposure environment General public/uncontrolled, Occupational/controlled Results RF exposure compliance distances, required for the equipment under test (EUT) to comply with the mobile device exposure conditions and relevant limits applicable in the USA [1]-[3] are listed below for the general public (GP) and occupational (O) exposure limits. RF exposure compliance assessment results for general public (GP) and occupational (O) exposure for Dot 4459/4469 B48, together with an assumed output power tolerance of 1 dB, using procedures applicable for the US market [3]. Band Standard Maximum nominal output power from the radio TDD DL duty cycle Compliance distance GP O B48 NR, LTE 4 x 0.4 W 75% 20 cm 1 This page contains a summary of the test results. The full report provides a complete description of all test details and results. 3 (9) GFTL-22:000831 Uen, Rev B, 2022-06-03 2 General information The purpose of the tests was to verify that the EUT is in compliance with the appropriate RF exposure standards, recommendations and limits applicable in the USA [1]–[3]. Compliance is demonstrated by showing that the EUT meets the test exemption criteria specified in [3] at a minimum test separation distance of 20 cm. The details of the analysis are presented in Section 4. It should be noted that the test results presented in this test report are valid for the frequency range and for the antenna properties specified in Table 1, in addition to the power level, the power tolerance and TDD downlink duty cycle specified in Table 2. These data, together with information on the physical separation of the antennas were supplied by the client and may affect the validity of the results. The test results were determined for Dot 4459 B48 (equipped with internal antennas) and are also applicable for Dot 4469 B48 connected to external antennas provided that the antenna gain for each branch is equal to or smaller than 5.3 dBi and that the minimum distance between antennas remains equal or larger than 75 mm. Proposed EMF health and safety information for inclusion in the Customer Product Information (CPI) is provided in Appendices A and B. 3 Equipment under test Table 1 summarizes the technical data for the EUT. Photographs and drawing of the EUT are presented in Appendix C. Table 1 Technical data for the EUT. Product name Ericsson Dot 4459 B48 Product tested KRY 901 516/1 Supported bands, Tx frequency range (MHz), and standards B48 3550–3700 NR TDD, LTE TDD Dimensions of Radio head, H x D (mm) 76 × 220 Configuration(s) covered by this report B48 Antenna(s) Four internal antenna branches Maximum antenna gain for each branch (dBi) Branch A: 4.6 Branch B: 4.7 Branch C: 5.3 Branch D: 5.2 Exposure environment General public/uncontrolled, Occupational/controlled Output power levels of the EUT are given in Table 2. Table 2 Output power levels of the EUT. Band Standard Maximum nominal output power [W / dBm] Power tolerance [dB] TDD DL duty cycle Maximum time- averaged output power 2 [W / dBm] B48 NR, LTE (TDD) 4 x 0.4 / 32 1 75% 1.5 / 31.79 The EUT related data in Table 1 and Table 2 were supplied by the client. 4 Test exemption justification 2 Conservative measure of the total maximum possible output power level delivered to the antennas including losses, tolerances, and maximum TDD DL duty cycle. 4 (9) GFTL-22:000831 Uen, Rev B, 2022-06-03 FCC procedures [3] specify exemptions criteria and exposure assessment methods to verify compliance with EMF exposure limits [1] of mobile devices. The minimum test separation distance for which the equipment is shown to comply with the exposure limits must be clearly provided in the operating and installation instructions. A minimum test separation distance of at least 20 cm is required between the device and nearby persons to apply mobile device exposure limits. 4.1 Single antenna The effective radiated power (ERP) for each of the four antenna branches (including output power tolerance and TDD DL duty cycle) is calculated in Table 3 based on the EUT data provided by the client and reported in Table 1 and Table 2. Table 3 also specifies the ERP threshold derived by means of the SAR-based exemption threshold specified in [3] 3 for a minimum test separation distance of 20 cm and applicable in the frequen…

Text truncated - open the document above for the full version.

Testing Laboratory Certificate #2955.19 Page 1 of 86 Report Issued: 6/9/2022 Report File #: 7169011341A-CBRS-005 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc Test Report As per FCC Part 96 SAS requirements (CBRS Test Plan) on the Ericsson Remote Radio Unit KRY 901 516/1 DOT 4459 B48 (3550-3700MHz) & KRY 901 516/2 DOT 4469 B48 (3550-3700MHz) Issued by: TÜV SÜD Canada Inc. 1280 Teron Rd, Ottawa, ON K2K 2C1 Canada Testing produced for Ericcson Canada See Appendix A for full client & EUT details. Steve McFarlane Test Personnel Scott Drysdale Report Reviewer Client Ericsson Product KRY 901 516/1 DOT 4459 B48 (3550-3700MHz) KRY 901 516/2 DOT 4469 B48 (3550-3700MHz) Standard(s) FCC Part 96 SAS requirements (CBRS Test Plan) Page 2 of 86 Report Issued: 6/9/2022 Report File #: 7169011341A-CBRS-005 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Table of Contents Table of Contents ............................................................................................................................ 2 Report Scope ................................................................................................................................... 3 Summary ......................................................................................................................................... 4 Test Results Summary ................................................................................................................ 5 Notes, Justifications, or Deviations .......................................................................................... 14 Applicable Standards, Specifications and Methods ...................................................................... 15 Document Revision Status ............................................................................................................ 16 Definitions and Acronyms ............................................................................................................ 17 Testing Facility ............................................................................................................................. 18 Calibrations and Accreditations ................................................................................................ 18 Testing Environmental Conditions and Dates .......................................................................... 19 Detailed Test Results Section ....................................................................................................... 20 Authorization transmit after it receives authorization from a SAS. .......................................... 21 Check the device registration and authorization with the SAS................................................. 29 Confirm that the device changes its operating power and/or channel in response to a command from the SAS and Confirm that the device correctly configures based on the different license classes. ...................................................................................................................................... 29 Confirm that the device transmits at a power level less than or equal to the maximum power level approved by the SAS. ....................................................................................................... 45 WINNF Security Test Case Analysis ........................................................................................... 55 WINNF.FT.C.SCS.1 ................................................................................................................. 55 WINNF.FT.C.SCS.2 ................................................................................................................. 60 WINNF.FT.C.SCS.3 ................................................................................................................. 67 WINNF.FT.C.SCS.4 ................................................................................................................. 72 WINNF.FT.C.SCS.5 ................................................................................................................. 76 Appendix A – EUT & Client Provided Details ............................................................................ 82 Technical Description ............................................................................................................... 84 Appendix B – EUT, Peripherals, and Test Setup Photos .............................................................. 85 Client Ericsson Product KRY 901 516/1 DOT 4459 B48 (3550-3700MHz) KRY 901 516/2 DOT 4469 B48 (3550-3700MHz) Standard(s) FCC Part 96 SAS requirements (CBRS Test Plan) Page 3 of 86 Report Issued: 6/9/2022 Report File #: 7169011341A-CBRS-005 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Report Scope This report addresses the WINNForum verification testing and test results of the KRY 901 516/1 DOT 4459 B48 (3550-3700MHz) & KRY 901 516/2 DOT 4469 B48 (3550-3700MHz) herein referred to as EUT (Equipment Under Test). The EUT was tested for compliance against the following standards: FCC Part 96 SAS requirements (CBRS Test Plan) Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. For a more detailed list of the standards and the revision used, see the "Applicable Standards, Specifications and Methods" section of this report. This report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of TÜV SÜD Canada Inc accreditations. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc, unless otherwise stated. Client Ericsson Product KRY 901 516/1 DOT 4459 B48 (3550-3700M…

Text truncated - open the document above for the full version.

––––––––-–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– © TÜV SÜD Canada Inc This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Radiated Emissions Test Report for DOT 4459 B48 (KRY 901 516/1) and DOT 4469 B48 (KRY 901 516/2) (Contiguous & non- Contiguous modes) Tested to: FCC Part 15 Subpart B (Class B) FCC Part 96 (Section – 96.41 e) 2)) FCC ID: TA8AKRY901516-1 Test Result summury FCC/ ICES Section Description Specification/Method Pass or Fail Results in section 15.109 / 6.2 Radiated Emissions (RE) FCC Part 15 / ANSI C63.4 Pass 3.2 15.107 / 6.1 Conducted Emissions (CE) for AC Power FCC Part 15 / ANSI C63.4 NA NA 96.41 e) 2) Additional protection levels (RE) FCC Part 96 / ANSI C63.26 Pass 3.2 Document number: 7169010768-TR-EMC-03-01-F15 Release date: 7 June 2022 Prepared for: Ericsson Canada Radiated Emissions Test Report for DOT 4459 B48 (KRY 901 516/1) and DOT 4469 B48 (KRY 901 516/2) 7169010768-TR-EMC-03-01-F15 Prepared for: Ericsson Canada © TÜV SÜD Canada Inc This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Release date: 7 June 2022 Page 2 of 63 About this document This document is written and distributed by TÜV SÜD Canada Inc. Whenever TÜV SÜD is mentioned in this document it shall be taken as referring to TÜV SÜD Canada Inc. This test report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of the accreditations of TÜV SÜD Canada Inc. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc, unless otherwise stated. Throughout this document: • text in blue font is a clickable link • text in italics is provided as-is from the customer The release control record, document approvals, and laboratory Accreditations are as follows. Release control record This document is based on document template KG000347-TR-EMC-08-03. Issue Reason for change Date released 01 initial release 11 April 2022 03 Re issue with FCC ID (For DOT 4459 (KRY 901 516/1) 7 June 2022 Approvals Function Name Job title Signature Technical Reviewer Scott Drysdale Canada Wireless Manager Author Kasi Sivaratnam EMC Test Engineer Radiated Emissions Test Report for DOT 4459 B48 (KRY 901 516/1) and DOT 4469 B48 (KRY 901 516/2) 7169010768-TR-EMC-03-01-F15 Prepared for: Ericsson Canada © TÜV SÜD Canada Inc This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Release date: 7 June 2022 Page 3 of 63 Accreditations The test facilities of TÜV SÜD Canada Inc are accredited by the American Association for Laboratory Accreditation (A2LA) to ISO/IEC 17025:2017 in accordance with the scope of accreditation outlined at the website portal.a2la.org/scopepdf/2955-19.pdf. A2LA Cert. No. 2955.19 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD Canada with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD Canada. No part of this document may be reproduced without the prior written approval of TÜV SÜD Canada. © TÜV SÜD. ACCREDITATION Our A2LA Accreditation does not cover opinions and interpretations and any expressed are outside the scope of our A2LA Accreditation. The Canadian lab registration number associated with the TÜV SÜD test facilities is 24015. Test lab information Lab name TÜV SÜD Canada Inc Company name TÜV SÜD Canada Inc Mailing or shipping address 1280 Teron Road, Ottawa, Ontario, K2K 2C1, Canada Primary technical contact Scott Drysdale Title Canada Wireless Manager Phone 613-218-1841 Customer information Company name Ericsson Canada Mailing address 349 Terry Fox Drive, Ottawa, On, K2K 2V6, Canada Primary contact Denis Lalonde Title Team Leader RA Verification Phone 613-790-2901 E-mail [email protected] Radiated Emissions Test Report for DOT 4459 B48 (KRY 901 516/1) and DOT 4469 B48 (KRY 901 516/2) 7169010768-TR-EMC-03-01-F15 Prepared for: Ericsson Canada © TÜV SÜD Canada Inc This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Release date: 7 June 2022 Page 4 of 63 Table of contents About this document ................................................................................................................................. 2 1. Executive summary ............................................................................................................................ 8 1.1 Compliance summary ..................................................................................................................... 9 2. Details of the equipment under test ................................................................................................ 10 2.1 Assessed hardware ........................................................................................................................ 10 2.2 Product overview .......................................................................................................................... 10 2.3 Product port definition and EUT cable information ..................................................................... 13 2.4 Configurations of the EUT............................................................................................................ 14 2.4.1 Configuration 1: Dot 4469 B48 with IRU 1648 (contiguous mode) .................................... 14 2.4.1.1 Radiated Emissions Single RAT/Single Carrier Configurations (LTE) – Cfg 1 ......... 15 2.4.1.2 Radiated Emissions Single RAT / Single Carrier Configurations (NR) – Cfg 1 ........ 16 2.4.1.3 Radiated Emissions Single RAT / Multi Carriers Configurations (LTE) – Cfg 1 ...... 17 2.4.1.4 Radiated Emissions Multi RAT/Multi Carrier Configuration (LTE+NR) – Cfg 1 ..... 18 2.4.2 Configuration 2: Dot 4469 B48 with IRU 1649 (non-contiguous m…

Text truncated - open the document above for the full version.

Document 7169010768.2 Report 02 Issue 5 March 3, 2023 Report On FCC Testing of the Ericsson Dot 4469 B48, KRY 901 516/2, Dot 4459 B48, KRY 901 516/1, LTE, NR, NR + LTE (3550-3700 MHz) Base Station in accordance with FCC CFR 47 Part 2, FCC CFR 47 Part 96 COMMERCIAL-IN-CONFIDENCE FCC: TA8AKRY901516-1 PREPARED BYAPPROVED BYDATED 3-March, 2023 Steve McFarlaneGlen Westwell Test EngineerAuthorised Signatory Document 7169010768.2 Report 02 Issue 5 Page 1 of 148 COMMERCIAL – IN - CONFIDENCE CONTENTS Section Page No 1 REPORT INFORMATION ............................................................................................................ 2 1.1Report Details ................................................................................................................................ 3 1.2Brief Summary of Results .............................................................................................................. 4 1.3Test Rationale ................................................................................................................................ 5 1.4Configuration Description .............................................................................................................. 6 1.5Declaration of Build Status ............................................................................................................ 8 1.6Product Information ..................................................................................................................... 10 1.7Test Setup ................................................................................................................................... 11 1.8Test Conditions ............................................................................................................................ 12 1.9Deviation From The Standard ..................................................................................................... 12 1.10Modification Record ..................................................................................................................... 12 1.11Additional Information .................................................................................................................. 12 2 TEST DETAILS .......................................................................................................................... 14 2.1Output Power, Peak to Average Ratio & PSD - Conducted ........................................................ 15 2.2Occupied Bandwidth .................................................................................................................... 55 2.3Band Edge & ADDITIONAL PROTECTION LEVELS ................................................................. 63 2.4Transmitter Spurious Emissions .................................................................................................. 89 2.5Frequency Stability ............................................................................................…

Text truncated - open the document above for the full version.