TC2-R1043Streaming Player with Built-in Speaker

Need more help? support.roku.com Just wait until you hear this Quick Start Guide Common questions Why do I need to enable HDMI-CEC and ARC on my TV? HDMI-CEC lets you control your TV’s power with the Roku remote while ARC makes sure all of your TV inputs send sound through your Streambar SE. TV manufacturers may use different names for these settings and some, including Roku TVs, automatically enable them. Refer to your TV manual or visit the link below for help. How do I use my Streambar SE remote with my Roku TV? By default, your Streambar SE will work as a soundbar when connected to a Roku TV, so you only need to use your Roku TV remote. To use your Streambar SE as a streaming player, visit “TV inputs” in your Roku TV’s settings menu. There, you can choose to show your Roku Streambar SE’s HDMI input tile on your Roku TV home screen. Why do I need to create a Roku account? You’ll need a Roku account to stream, add channels, easily manage subscriptions, rent movies, and more. Why should I enter a credit card? Saving a payment method makes it easy to rent or buy movies, subscribe to popular channels, and start free trials in just a click. No charges will be made without your authorization. Visit go.roku.com/streambar-se for more information Easily expandable Add some boom to your room. Tips and tricks Using sound settings While streaming, press to view Sound settings, like: • Volume leveling Helps keep your volume consistent and quiets loud commercials. • Speech clarity Improves clarity of voices so your favorite TV is easier to hear. • Night mode Lowers loud scenes while boosting quiet ones so you don’t wake the house. Pairing a Bluetooth ® device • From the home screen, go to Settings > Remotes & devices. • Choose either Smartphones & tablets to stream from your mobile device or Wireless headphones for private listening. Video tutorials Wi-Fi® help Save money. Stream big. streamandsave.com See what’s streaming for free, tips, and more roku.com/blog Free TV Live TV Follow us © 2023 Roku, Inc. All rights reserved. Roku, Roku TV, the Roku logo, Streambar, the purple d-pad design, and the purple fabric tag design are trademarks or registered trademarks of Roku, Inc. All other logos and trademarks herein not owned by Roku, Inc. are the property of their respective owners. 4100001003_01 Sold separately. Two AAA batteries 213 654 Remote RESETOPTICALPOWER Let’s get started STEP 2: Connect to power Use the included power adaptor to connect your Streambar SE to a wall outlet. STEP 3: Connect to TV Connect your Streambar SE to the HDMI port on your TV labeled “ARC” with the included cable. Don’t see an HDMI-ARC port? Use the included optical cable along with the HDMI cable to connect. Remember to remove the plastic caps before use! IHDM TIP: Place your Streambar SE at the front edge of your TV stand for the best sound experience. HDMI (ARC) HDMI All other TVs You may need to enable your TV’s HDMI-CEC and ARC settings. TV manufacturers use different names for these settings. For help, visit go.roku.com/streambar-se Power adaptor Premium High Speed HDMI® Cable Optical cable (optional) Only use if your TV doesn’t have an HDMI-ARC port. What’s included Roku Streambar SE Details RESETOPTICALPOWER USB 2.0PowerOptical HDMI-ARCReset Back Volume Channel shortcuts Options TV power Instant replay Mute Remote STEP 1: Adjust TV settings Have a Roku TV™? Just use the remote that came with your Roku TV and follow steps 2 and 3. The rest is automatic, even linking your Roku account. OR STEP 4: Select input Use your TV remote to select the HDMI input (source) you used to connect your Streambar SE. Antenna A/V 1 HDMI 1 HDMI 2 Input STEP 5: Insert batteries Slide open the cover on the back of your remote and insert the included batteries. Your remote will be ready to use. STEP 6: Follow on-screen setup Follow the instructions on your TV screen. Activate your Streambar SE by using your computer or smartphone to link to a Roku account. IMPORTANT: Roku never charges for activation support. Let’s get started English Deutsch Español Français 12:40 pm | Options Roku® Streambar® SE (“Streambar”), including Roku Remote (“Remote”), and any accessories that may have come with the product, collectively the “Product” The Streambar which accompanies this Important Product Information allows you to stream online entertainment to your TV and hear audio from the built-in speakers. A Roku account is required to activate your Streambar. When you sign up for a Roku account, you will be asked to provide your contact information and a payment method so that you can easily rent movies or sign-up for additional services. Your authorization is required for any such charges. There are no equipment rental fees for owning the Streambar. However, a paid subscription or other form of payment may be required to access some channels or content. Channel availability is subject to change and varies by region. Check with each channel provider for specific bandwidth requirements to stream SD, 720p, 1080p HD, 4K, and HDR content (subject to TV compatibility). Please read and keep all safety and use instructions. Important Product Information Safety Precautions Any electrical device, if used improperly, has the potential for causing fire, electrical shock, property damage or personal injury. To help ensure accident-free and enjoyable operation, follow these guidelines: • Observe all warnings, precautions and instructions. • Regularly inspect the AC power adaptor and power cable, as applicable to your Product, for damage. • If the Product has been damaged, cracked or punctured, or if the Product functions in an abnormal manner, produces unusual sounds or smells or becomes hot, immediately stop use, unplug the AC power adaptor or power cable from the electrical outlet and disconnect any other cables. • Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. • For more information on pr…

Text truncated - open the document above for the full version.

Roku, Inc. 1173 Coleman Ave. San Jose, CA 95110 USA CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 11/01/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: TC2-R1043 Roku, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Robert Curtis VP, Engineering Roku, Inc. 1173 Coleman Ave San Jose, CA 95110 United States Robert Curtis (Nov 1, 2023 09:44 PDT) Robert Curtis Roku, Inc. 1173 Coleman Ave. San Jose, CA 95110 USA CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 11/01/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: TC2-R1043 Roku, Inc. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Robert Curtis VP, Engineering Roku, Inc. 1173 Coleman Ave San Jose, CA 95110 United States Robert Curtis (Nov 1, 2023 09:44 PDT) Robert Curtis

Roku, Inc. 1173 Coleman Ave. San Jose, CA 95110 USA Attestation Letter for Agent 11/01/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(7) Filing FCC ID: TC2-R1043 Roku Inc. certifies that, as of the date of the filing of the application, Roku Inc. is our designated U.S. agent for service of process for the above referenced FCC ID: TC2-R1043. Roku Inc. agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Roku Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company name: Roku Inc. (FRN: 0013581079) Address: 1173 Coleman Ave, San Jose, CA 95110, United States Contact person: Robert Curtis Tel: (707) 365-0353 Email: [email protected] Sincerely, Applicant Name Roku Inc. Applicant Printed Name Robert Curtis Applicant Signature Robert Curtis (Nov 1, 2023 09:44 PDT) Robert Curtis

QA-FR-170-B 7/29/2014 Roku, Inc. 1173 Coleman Ave. San Jose, CA 95110 USA FCC Authorization 11/01/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Applicant Roku, Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Robert Curtis VP, Engineering 1173 Coleman Ave San Jose, CA 95110 United States Robert Curtis (Nov 1, 2023 09:44 PDT) Robert Curtis

Roku, Inc. 1173 Coleman Ave. San Jose, CA 95110 USA QA-FR-172-A FCC Confidential Authorization 11/01/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Su bject: Confidentiality Request regarding application for certification of FC C I D: TC2-R1043 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Roku, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: x Block Diagram x Schematics x Operation Description As well as short-term confidential treatment of information accompanying this application as outlined below: x Antenna Report x Internal Photos x User’s Manual x External Photos x Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Robert Curtis VP, Engineering 1173 Coleman Ave San Jose, CA 95110 United States Robert Curtis (Nov 1, 2023 09:44 PDT) Robert Curtis

EUT External Photographs 1.1 EUT Front View 1.2 EUT Rear View 1.3 EUT Top View 1.4 EUT Bottom View 1.5 EUT Left Side View 1.6 EUT Right Side View 1.7 Switching Adapter [Model: ADS-26FSG-12]

Label and Label Location Device Bottom View Model: 9104X FCC ID: TC2-R1043 IC: 5959A-R1040 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EUT Internal Photographs 1.1 EUT Open Enclosure View 1.2 Internal Top View 1.3 Internal Bottom View 1.4 Internal Bottom View 1.5 Internal Bottom View 1.6 Internal Antennas View Wifi Antenna 1.7 Internal Antennas View 1.8 Internal Antennas View BT Antenna Wifi Antenna

Shenzhen ZTX Communication Technology Co., Ltd Roku音箱项目天线测试报告 Shenzhen ZTX Communication Technology Co., Ltd q 天线位置 q 测试环境 q 天线无源测试数据 目录 Shenzhen ZTX Communication Technology Co., Ltd 天线位置 ANT1BTANT2 Shenzhen ZTX Communication Technology Co., Ltd 测试环境 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （WIFI1-效率/增益） FrequencyEfficiencyPeak Gain Mhz%dBdB 5150 22.84 -6.41 0.25 5200 20.55 -6.87 -0.04 5250 25.21 -5.98 0.79 5300 31.74 -4.98 1.69 5350 35.17 -4.54 1.80 5400 32.38 -4.90 1.32 5450 34.75 -4.59 1.68 5500 41.29 -3.84 2.11 5550 51.40 -2.89 3.94 5600 48.41 -3.15 3.17 5650 49.60 -3.05 3.33 5700 49.75 -3.03 3.08 5750 51.81 -2.86 4.17 5800 49.99 -3.01 4.43 5850 49.94 -3.02 4.37 FrequencyEfficiencyPeak Gain Mhz%dBdB 2400 32.50 -4.88 1.53 2410 32.87 -4.83 1.49 2420 36.67 -4.36 1.78 2430 36.77 -4.35 1.68 2440 40.81 -3.89 1.86 2450 40.39 -3.94 2.07 2460 43.12 -3.65 2.25 2470 42.92 -3.67 1.90 2480 43.90 -3.58 1.79 2490 46.32 -3.34 2.11 2500 49.08 -3.09 2.45 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （WIFI1-2.4G方向图） XOY面XOZ面 YOZ面 Z XY 2450MHz 3D方向图 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （WIFI1-5G方向图） XOY面XOZ面 YOZ面 Z XY 5500MHz 3D方向图 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （WIFI2-效率/增益） FrequencyEfficiencyPeak Gain Mhz%dBdB 5150 33.05 -4.81 2.08 5200 29.92 -5.24 1.37 5250 32.31 -4.91 1.96 5300 31.86 -4.97 1.88 5350 34.01 -4.68 2.38 5400 36.30 -4.40 3.17 5450 37.79 -4.23 3.50 5500 38.53 -4.14 3.80 5550 43.83 -3.58 4.68 5600 41.11 -3.86 4.55 5650 41.58 -3.81 3.91 5700 41.67 -3.80 3.73 5750 45.39 -3.43 4.28 5800 46.99 -3.28 4.11 5850 49.95 -3.01 4.46 FrequencyEfficiencyPeak Gain Mhz%dBdB 2400 25.17 -5.99 0.52 2410 26.64 -5.74 0.86 2420 28.02 -5.53 0.78 2430 32.44 -4.89 1.02 2440 34.42 -4.63 1.24 2450 37.36 -4.28 1.86 2460 38.23 -4.18 1.78 2470 41.45 -3.82 1.77 2480 40.91 -3.88 1.65 2490 41.44 -3.83 2.02 2500 42.09 -3.76 2.51 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （WIFI2-2.4G方向图） XOY面XOZ面 YOZ面 Z XY 2450MHz 3D方向图 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （WIFI2-5G方向图） XOY面XOZ面 YOZ面 Z XY 5500MHz 3D方向图 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （BT-效率/增益） FrequencyEfficiencyPeak Gain Mhz%dBdB 2400 33.04 -4.81 1.55 2410 33.33 -4.77 1.67 2420 37.07 -4.31 2.03 2430 37.16 -4.30 1.86 2440 41.05 -3.87 2.04 2450 40.61 -3.91 1.91 2460 43.32 -3.63 2.00 2470 43.04 -3.66 1.79 2480 43.65 -3.60 1.68 2490 45.75 -3.40 1.81 2500 48.10 -3.18 2.35 Shenzhen ZTX Communication Technology Co., Ltd 无源数据 （BT-2.4G方向图） XOY面XOZ面 YOZ面 Z XY 2450MHz 3D方向图 Shenzhen ZTX Communication Technology Co., Ltd Thank You

Roku, Inc. FCC ID: TC2-R1043, IC: 5959A-R1040 Report Number: R2304281-247 Page 19 of 60 FCC Part 15C/ISEDC RSS-247 Test Report 5 FCC §2.1091, §15.407(f) & ISEDC RSS-102 - RF Exposure 5.1 Applicable Standards According to FCC KDB 447498 D04 Interim General RF Exposure Guidance v01, Section 2.1 RF Exposure Test Exemptions for Single Source, 2.1.1 General RF Exposure Test Exemption Considerations RF exposure test exemptions provide means to obtain certification without the need of showing data (measurements, or analytical/numerical modeling) to demonstrate compliance. Hereafter, in this context, an RF source is referred to as “exempt RF device” in the sense that it is not required to show data demonstrating compliance to RF exposure limits. Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 8 However, it is always possible, especially when the potential for exposure cannot be easily determined, that an RF exposure evaluation may become required according § 1.1307(c) and (d). As detailed in Section 2.1.2, the 1 mW and SAR-based test exemption conditions are in terms of source-based available maximum time-averaged (matched conducted) output power for all operating configurations, adjusted for tune-up tolerance, and at the minimum test separation distance required for the particular RF exposure scenario under consideration. This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exemption, the test separation distances applied must be fully explained and justified (typically in the SAR measurement, or SAR analysis report, according to KDB Pub. 865664) by showing the actual operating configurations and exposure conditions of the transmitter, and applicable host platform requirements (e.g., KDB Pubs. 648474, 616217, 941225) When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exemption. If RF exposure testing requirements for a specific device are covered in a KDB Publication, those requirements must be satisfied before applying any SAR test exemption provisions. For example, this is the case for handheld PTT two-way radios, handsets, laptops, and tablets, etc. 9 Finally, when 10-g extremity SAR applies, SAR test exemption may be considered by applying a factor of 2.5 to the SAR-based exemption thresholds. 2.1.2 1-mW Test Exemption Per §1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time- averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. 2.1.3 SAR-Based Exemption Roku, Inc. FCC ID: TC2-R1043, IC: 5959A-R1040 Report Number: R2304281-247 Page 20 of 60 FCC Part 15C/ISEDC RSS-247 Test Report A more comprehensive exemption, considering a variable power threshold that depends on both the separation distance and power, is provided in §1.1307(b)(3)(ii)(B). This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. Accordingly, a RF source is considered an RF exempt device if its available maximum time-averaged (matched conducted) power or its effective radiated power (ERP), whichever is greater, are below a specified threshold. This exemption threshold was derived based on general population 1-g SAR requirements and is detailed in Appendix C. 2.1.4 MPE-Based Exemption An alternative to the SAR-based exemption is provided in §1.1307(b)(3)(ii)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the 8 Specific test exemption thresholds for operations under occupational/controlled limits are not established. 9 When SAR evaluation is required by the hotspot mode or UMPC mini-tablet procedures, that is, where an antenna is ≤ 2.5 cm from a surface or edge, the test separation distance from the phantom to the antenna or device enclosure, as appropriate, should be applied to determine SAR test exemption for such configurations, according to the criteria in this document. For that case, the test separation distance cannot be determined from the distance of the antenna to the device surface or edge. According to ISED RSS-102 Issue 5 Section 2.5.1 Exemption Limits for Routine Evaluation-SAR Evaluation: SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in table below, Frequency (MHz) Exemption Limits (mW) At separation distance of ≤5 mm At separation distance of 10 mm At separation distance of 15 mm At separation distance of 20 mm At separation distance of 25 mm ≤300 71 101 132 162 193 450 52 70 88 106 123 835 17 30 42 55 67 1900 7 10 18 34 60 2450 4 7 15 30 52 3500 2 6 16 32 55 5800 1 6 15 27 41 Roku, Inc. FCC ID: TC2-R1043,…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 15, SUBPART C ISEDC RSS-247, ISSUE 2, FEBRUARY 2017 TEST REPORT For Roku, Inc. 1155 Coleman Avenue, San Jose, CA 95110, USA FCC ID: TC2-R1043 IC:5959A-R1040 R e p o r t T y p e : O r i g i n a l R e p o r t M o d e l: 9 1 0 4 X Prepared By: Arturo Reyes Test Engineer Report Number: R2304281-247 Report Date: 2023-08-28 Reviewed By: Shawn Mcmillen Engineering Manager Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: +1 (408) 732-9162; Fax: +1 (408) 732-9164 Roku, Inc. FCC ID: TC2-R1043, IC: 5959A-R1040 Report Number: R2304281-247 Page 2 of 60 FCC Part 15C/ISEDC RSS-247 Test Report TABLE OF CONTENTS 1 General Description ..................................................................................................................................................... 5 1.1 Product Description for Equipment Under Test (EUT) ...................................................................................... 5 1.2 Mechanical Description of EUT ......................................................................................................................... 5 1.3 Objective ............................................................................................................................................................. 5 1.4 Related Submittal(s)/Grant(s) ............................................................................................................................. 5 1.5 Test Methodology ............................................................................................................................................... 5 1.6 Measurement Uncertainty ................................................................................................................................... 6 1.7 Test Facility Registrations .................................................................................................................................. 6 1.8 Test Facility Accreditations ................................................................................................................................ 6 2 System Test Configuration.......................................................................................................................................... 9 2.1 Justification ......................................................................................................................................................... 9 2.2 EUT Exercise Software....................................................................................................................................... 9 2.3 Duty Cycle Correction Factor ........................................................................................................................... 11 2.4 Equipment Modifications.................................................................................................................................. 15 2.5 Local Support Equipment ................................................................................................................................. 15 2.6 Support Equipment ........................................................................................................................................... 15 2.7 Interface Ports and Cabling ............................................................................................................................... 15 3 Summary of Test Results ............................................................................................................................................ 16 4 FCC §15.203 & ISEDC RSS-Gen §6.8 - Antenna Requirements ............................................................................ 17 4.1 Applicable Standards ........................................................................................................................................ 17 4.2 Antenna Description ......................................................................................................................................... 18 5 FCC §2.1091, §15.407(f) & ISEDC RSS-102 - RF Exposure ................................................................................... 19 5.1 Applicable Standards ........................................................................................................................................ 19 5.2 FCC RF Exposure Exemption Evaluation Procedures ...................................................................................... 21 5.3 RF Exposure Evaluation Exemption for FCC ................................................................................................... 24 5.4 RF Exposure Evaluation Exemption for IC ...................................................................................................... 25 6 FCC §15.207 & ISEDC RSS-Gen §8.8 - AC Power Line Conducted Emissions .................................................... 26 6.1 Applicable Standards ........................................................................................................................................ 26 6.2 Test Setup ......................................................................................................................................................... 26 6.3 Test Procedure .................................................................................................................................................. 26 6.4 Test Setup Block Diagram ...............…

Text truncated - open the document above for the full version.

Annex A: Emission Bandwidth BLE BLE_Low Ch_2402MHz_1MBit_Occupied Bandwidth_-6dB_Port 1 BLE_Low Ch_2402MHz_1MBit_Occupied Bandwidth_99 percent_Port 1 BLE_Mid Ch_2440MHz_1MBit_Occupied Bandwidth_-6dB_Port 1 BLE_Mid Ch_2440MHz_1MBit_Occupied Bandwidth_99 percent_Port 1 BLE_High Ch_2480MHz_1MBit_Occupied Bandwidth_-6dB_Port 1 BLE_High Ch_2480MHz_1MBit_Occupied Bandwidth_99 percent_Port 1 BLE_Low Ch_2402MHz_2MBit_Occupied Bandwidth_-6dB_Port 1 BLE_Low Ch_2402MHz_2MBit_Occupied Bandwidth_99 percent_Port 1 BLE_Mid Ch_2440MHz_2MBit_Occupied Bandwidth_-6dB_Port 1 BLE_Mid Ch_2440MHz_2MBit_Occupied Bandwidth_99 percent_Port 1 BLE_High Ch_2480MHz_2MBit_Occupied Bandwidth_-6dB_Port 1 BLE_High Ch_2480MHz_2MBit_Occupied Bandwidth_99 percent_Port 1 2.4 GHz Wi-Fi Port 1 WIFI_High Ch_2462MHz_20MHz BW_b-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_High Ch_2462MHz_20MHz BW_b-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Low Ch_2412MHz_20MHz BW_b-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Low Ch_2412MHz_20MHz BW_b-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Mid Ch_2437MHz_20MHz BW_b-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Mid Ch_2437MHz_20MHz BW_b-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_High Ch_2462MHz_20MHz BW_g-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_High Ch_2462MHz_20MHz BW_g-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Low Ch_2412MHz_20MHz BW_g-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Low Ch_2412MHz_20MHz BW_g-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Mid Ch_2437MHz_20MHz BW_g-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Mid Ch_2437MHz_20MHz BW_g-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_High Ch_2462MHz_20MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_High Ch_2462MHz_20MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Low Ch_2412MHz_20MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Low Ch_2412MHz_20MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Mid Ch_2437MHz_20MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Mid Ch_2437MHz_20MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_High Ch_2452MHz_40MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_High Ch_2452MHz_40MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Low Ch_2422MHz_40MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Low Ch_2422MHz_40MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 1 WIFI_Mid Ch_2437MHz_40MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 1 WIFI_Mid Ch_2437MHz_40MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 1 Port 2 WIFI_High Ch_2462MHz_20MHz BW_b-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_High Ch_2462MHz_20MHz BW_b-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_Low Ch_2412MHz_20MHz BW_b-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_Low Ch_2412MHz_20MHz BW_b-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_Mid Ch_2437MHz_20MHz BW_b-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_Mid Ch_2437MHz_20MHz BW_b-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_High Ch_2462MHz_20MHz BW_g-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_High Ch_2462MHz_20MHz BW_g-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_Low Ch_2412MHz_20MHz BW_g-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_Low Ch_2412MHz_20MHz BW_g-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_Mid Ch_2437MHz_20MHz BW_g-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_Mid Ch_2437MHz_20MHz BW_g-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_High Ch_2462MHz_20MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_High Ch_2462MHz_20MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_Low Ch_2412MHz_20MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_Low Ch_2412MHz_20MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_Mid Ch_2437MHz_20MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_Mid Ch_2437MHz_20MHz BW_n-mode_Occupied Bandwidth_99 percent_Port 2 WIFI_High Ch_2452MHz_40MHz BW_n-mode_Occupied Bandwidth_-6dB_Port 2 WIFI_High Ch_2452MHz_40MHz BW_n-mode_Occupied Bandwidth_99 perc…

Text truncated - open the document above for the full version.