TC23100XIP-STB

Hi! Let’s get started. What’s in the Box Roku player enhanced remote control 2 x aa batteries for remote a/V cable RCa to 3.5mm Power adapter G F Get to knoW youR roKu B C D h Front view Back view a e Power port – Connects your Roku player to a 120V aC power source with the included power adapter. h e a/V port – Connects your Roku player to a tV with the included a/V cable (3.5mm to RCa). Provides standard definition quality only. Reset button – Resets your Roku player to its original factory settings when pressed and held for 10 seconds (a feature you’ll rarely, if ever, use). G F ethernet port – Connects your Roku player to a wired network with an ethernet cable (not included). hDMi port – Connects your Roku player to an hDtV with an hDMi cable (not included). D a status light – Flashes slowly when the Roku player starts up. Glows when it’s on. Flashes once with each press of the remote control. storage expansion slot – Lets you increase your storage capacity for Roku apps with a microsD card (optional, not included). C B usB port – Plays your home videos, movies, music and photos from supported usB drives. For supported file types, visit roku.com/usb. DiD you notice? your Roku player has no on/off switch. it’s simpler that way and draws very little power—less than a nightlight! keep it plugged in so that it can download the latest software updates automatically. What you neeD Roku player tV (hD or standard definition) high-speed internet connection (DsL or cable modem) Router a/V cable (included) hDMi cable (sold separately) or Pssst! your router can be wireless (any Wi-Fi) or wired. For wired networks, you’ll also need an ethernet cable (not included). What to Do steP 1 Ready for the step-by-step? We’ve only got four... connect your PLAyer Connect your Roku player to your tV in one of two ways: HiGH DeFinition: if you have an hDtV and want the best picture quality, use an hDMi cable (not included) to make the connection depicted in the diagram below: DiD you Know? Because hDMi outputs digital video and audio, you don’t need a separate audio cable. hDMi also supports 5.1 surround sound (where available). Got A receiVer? you can also use hDMi to route video and audio directly through your receiver if it supports hDMi video pass-through. • Connect one end to the hDMi port on the back of your Roku player. • Connect the other end to an open hDMi port on your tV. What to Do steP 1 (ContinueD) stAnDArD DeFinition: if you have a standard-definition tV, do not have an hDMi cable or do not have a free hDMi port on your tV, use the included a/V cable to make the connection depicted in the diagram below: • Connect one end to the composite video and analog audio ports on the back of your tV (look for Video in, then match the yellow/Red/White ports). • Connect the other end to the a/V port on the back of your Roku player. it’s sPeciAL. the a/V cable included with your Roku player was custom-built for Roku. Because the Roku 2 Xs is so small, we use a single connector into the Roku player to carry video and stereo audio. What to Do steP 2 Power uP Key coMPonents in this step, we’ll make sure all systems are Go! First, power your Roku remote by inserting the included batteries: • turn the remote control over and locate the rectangular battery door on the rear of the unit. • Press the latch at the top of the battery door down while simultaneously removing the battery door. • insert the batteries into their slots, making sure to match the positive (+) and negative (-) signs. • Place the battery door back over the compartment and press it gently down until the latch snaps securely into place. What to Do steP 2 (ContinueD) next, power on your Roku player by connecting it to a wall outlet using the included power adapter, like this: Finally, power on your tV and look for a Roku message to fill the screen. BLAnK screen? if your tV does not display a Roku screen, make sure your tV input matches the physical connection used to connect your Roku player. Press the input button (also called source) on your tV or tV remote to cycle through the various video inputs available until you see a Roku screen. What to Do steP 3 conFiGure your networK step 3 establishes your network connection and brings out your inner geek. you can do it! Just choose either wireless or wired and read on for instructions: wireLess: if you use a wireless network, you can grab that Roku remote and jump right into Guided setup. When prompted, select “Wireless” as your network connection and have your network name and password ready to do the following: • select your network from the list of available networks. • enter your network password, if you use one. Remember, network passwords are case sensitive. Dos AnD Don’ts on wHere to PLAce your roKu PLAyer: • Do place your player within range of your wireless network. • Don’t place your player in an enclosed cabinet; it may interfere with the wireless signal. • Don’t place your player beneath anything; it may cause the player to overheat. eeeeks. What to Do steP 3 (ContinueD) wireD: if you use a wired network, this step is a snap. simply make the two connections depicted in the diagram below, and then use your Roku remote to select “Wired” from the on-screen network options. • Connect one end to the ethernet port on the back of your Roku player. • Connect the other end to an open ethernet port on your router. What to Do steP 4 coMPLete GuiDeD setuP it’s the final stretch and hooray—it’s a breeze! Continue following the on-screen instructions and you’ll: • Get the latest software. • select the video output resolution. • Link the Roku player to your Roku account on your computer. and setup is done...congratulations! Continue using that Roku remote, which you can learn more about on the following pages, to personalize your channel line-up, stream movies or play games. the fun part has just begun, we promise. your roKu Account: During Guided setup, you’ll be prompted to create your Roku account onl…

Text truncated - open the document above for the full version.

Roku LLC 19352 Hilton Rd Springdale Arkansas Springdale Arkansas United States Request for Supercede TO: Federal Communication Commission Industry Canada Please kindly be notified that we, ROKU LLC herein request to supercede the FCC ID: TC23100X/ IC: 5959A-3100X for the following reason: 1. The label location is not correct and we will retake the label location and is willing to replace the old one in FCC/IC data base. Thank you. Sincerely, Name / Title: Greg Garner Company: Roku LLC Tel: 479-871-1148 Fax: 408-446-1734 Email: [email protected]

Report No： 115S035R-RF-US-P06V01 Page: 119 of 134 21. Appendix 2 – EUT Photograph (1) EUT Photo (3100X) (2) EUT Photo (3100X) Report No： 115S035R-RF-US-P06V01 Page: 120 of 134 (3) EUT Photo (3100X) (4) EUT Photo (3100X) Report No： 115S035R-RF-US-P06V01 Page: 121 of 134 (5) EUT Photo (3100X) (6) EUT Photo (3100X) Report No： 115S035R-RF-US-P06V01 Page: 124 of 134 (11) EUT Photo (3100X) (12) EUT Photo (3100X) Report No： 115S035R-RF-US-P06V01 Page: 125 of 134 (13) EUT Photo (3100X&3000X&3050X) (14) EUT Photo (3100X) (Adapter #1) Report No： 115S035R-RF-US-P06V01 Page: 126 of 134 (15) EUT Photo (3100X) (Adapter #2) (16) EUT Photo (3100X) (Adapter #2) Report No： 115S035R-RF-US-P06V01 Page: 127 of 134 (17) EUT Photo (3000X) (18) EUT Photo (3000X) Report No： 115S035R-RF-US-P06V01 Page: 128 of 134 (19) EUT Photo (3050X) (20) EUT Photo (3050X) Report No： 115S035R-RF-US-P06V01 Page: 129 of 134 (21) EUT Photo (3000X&3050X) (22) EUT Photo (3000X&3050X) Report No： 115S035R-RF-US-P06V01 Page: 130 of 134 (23) EUT Photo (3000X&3050X) (24) EUT Photo (3000X&3050X) Report No： 115S035R-RF-US-P06V01 Page: 133 of 134 (29) EUT Photo (3000X&3050X) (30) EUT Photo (3000X&3050X) Report No： 115S035R-RF-US-P06V01 Page: 134 of 134 (31) EUT Photo (3000X&3050X) (Adapter #3) (32) EUT Photo (3000X&3050X) (Adapter #4)

GIGA, AWRK, BELLY LABEL, 3100X04152011rev.001 This device complies with p art 15 of the FCC Rules. Op e r a t i o n i s s u b ject to the following two conditions: (1) this device may n o t c a u s e h a rmful interference, and (2) this device must accept any i n t e r f e r e n c e received, including interference that may c ause undesir e d o p e r a t i o n . Model #: 3100X FCC ID: TC23100X IC: 5959A-3100X Designed in USA. Assembled in China. V002 5V 1.5A 44.65mm 44.65mm TYPEFACE: GOTHAM MEDIUM SIZE: 4 pt 422 CProcess Black C NOTES UNLESS OTHERWISE SPECIFIED 1 2 3 4 5 DO NOT SCALE; ARTWORK PLACEMENT 1:1 LABEL MATERIAL: MYLAR CENTER ARTWORK OVER MID-PLANE 1 COLOR: PMS PROCESS BLACK C COLOR: PMS 422 C MID-PLANE 1 MID-PLANE 2 TYPEFACE: GOTHAM MEDIUM SIZE: 3.75 pt GIGA, AWRK, BELLY LABEL, 3050X051911rev.002 This device complies with p art 15 of the FCC Rules. Op e r a t i o n i s s u b ject to the following two conditions: (1) this device may n o t c a u s e h a rmful interference, and (2) this device must accept any i n t e r f e r e n c e received, including interference that may c ause undesir e d o p e r a t i o n . Model #: 3050X FCC ID: TC23100X IC: 5959A-3100X Designed in USA. Assembled in China. V002 5V 1A 44.65mm 44.65mm TYPEFACE: GOTHAM MEDIUM SIZE: 4 pt 422 CProcess Black C NOTES UNLESS OTHERWISE SPECIFIED 1 2 3 4 5 DO NOT SCALE; ARTWORK PLACEMENT 1:1 LABEL MATERIAL: MYLAR CENTER ARTWORK OVER MID-PLANE 1 COLOR: PMS PROCESS BLACK C COLOR: PMS 422 C MID-PLANE 1 MID-PLANE 2 TYPEFACE: GOTHAM MEDIUM SIZE: 3.75 pt GIGA, AWRK, BELLY LABEL, 3000X051911rev.002 This device complies with p art 15 of the FCC Rules. Op e r a t i o n i s s u b ject to the following two conditions: (1) this device may n o t c a u s e h a rmful interference, and (2) this device must accept any i n t e r f e r e n c e received, including interference that may c ause undesir e d o p e r a t i o n . Model #: 3000X FCC ID: TC23100X IC: 5959A-3100X Designed in USA. Assembled in China. V002 5V 1A 44.65mm 44.65mm TYPEFACE: GOTHAM MEDIUM SIZE: 4 pt 422 CProcess Black C NOTES UNLESS OTHERWISE SPECIFIED 1 2 3 4 5 DO NOT SCALE; ARTWORK PLACEMENT 1:1 LABEL MATERIAL: MYLAR CENTER ARTWORK OVER MID-PLANE 1 COLOR: PMS PROCESS BLACK C COLOR: PMS 422 C MID-PLANE 1 MID-PLANE 2 TYPEFACE: GOTHAM MEDIUM SIZE: 3.75 pt Back cover Label Location Note: The label is on the back cover of the product.

Report No： 115S035R-RF-US-P06V01 Page: 131 of 134 (25) EUT Photo (3000X&3050X) (26) EUT Photo (3000X&3050X) Report No： 115S035R-RF-US-P06V01 Page: 132 of 134 (27) EUT Photo (3000X&3050X) (28) EUT Photo (3000X&3050X) Report No： 115S035R-RF-US-P06V01 Page: 122 of 134 (7) EUT Photo (3100X) (8) EUT Photo (3100X) Report No： 115S035R-RF-US-P06V01 Page: 123 of 134 (9) EUT Photo (3100X) (10) EUT Photo (3100X)

RF Exposure Evaluation Declaration Product Name : IP-STB Model No. : 3000X, 3050X, 3100X FCC ID : TC23100X IC : 5959A-3100X Applicant : Roku Inc. Address : 12980 Saratoga Ave, Suite D Saratoga, CA 95070 Date of Receipt : 20/05/2011 Issued Date : 30/05/2011 Report No. : 115S035R-RF-US Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 115S035R-RF-US Page: 2 of 5 Test Report Certification Issued Date : 30/05/2011 Report No. : 115S035R-RF-US Product Name : IP-STB Applicant : Roku Inc. Address : 12980 Saratoga Ave, Suite D Saratoga, CA 95070 Manufacturer : Ambit Mircosystems(Shanghai) LTD. Address : 1925, Nanle Road, Songjiang Export Processing Zone, Shanghai, China 201613 Model No. : 3000X, 3050X, 3100X FCC ID : TC23100X IC : 5959A-3100X EUT Voltage : 100-240Vac +/-10% Trade Name : Roku Applicable Standard : FCC OET 65 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Jame Yuan) Approved By : (Engineering Supervisor: Marlin Chen) Report No： 115S035R-RF-US Page: 3 of 5 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No： 115S035R-RF-US Page: 4 of 5 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No： 115S035R-RF-US Page: 5 of 5 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : IP-STB Test Item : RF Exposure Evaluation Test Site : AC-6 Antenna Gain: Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2dBi. Output Power into Antenna & RF Exposure Evaluation Distance: Test Mode Frequency Band (MHz) Maximum Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 802.11 b/g/n(20MHz) 2412~2462 118.8502 0.037474

Test Report Industry Canada RSS-Gen Issue 3/RSS-210 Issue 8 FCC Part15 Subpart C Product Name : IP-STB Model No. : 3000X, 3050X, 3100X FCC ID : TC23100X IC : 5959A-3100X Applicant : Roku Inc. Address : 12980 Saratoga Ave, Suite D Saratoga, CA 95070 Date of Receipt : 20/05/2011 Test Date : 20/05/2011~ 30/05/2011 Issued Date : 30/05/2011 Report No. : 115S035R-RF-US-P05V01 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No：115S035R-RF-US-P05V01 Page: 2 of 114 Test Report Certification Issued Date : 30/05/2011 Report No. : 1 15S035R-RF-US-P05V01 Product Name : IP-STB Applicant : Roku Inc. Address : 12980 Saratoga Ave, Suite D Saratoga, CA 95070 Manufacturer : Ambit Mircosystems(Shanghai) LTD. Address : 1925, Nanle Road, Songjiang Export Processing Zone, Shanghai, China 201613 Model No. : 3000X, 3050X, 3100X FCC ID : TC23100X IC : 5959A-3100X EUT Voltage : 100-240Vac +/-10% Brand Name : Roku Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2008 ANSI C63.4: 2009; ANSI C63.10: 2009 Industry Canada RSS-Gen Issue 3/RSS-210 Issue 8 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Jame Yuan) Approved By : (Engineering Supervisor: Marlin Chen) Report No：115S035R-RF-US-P05V01 Page: 3 of 114 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No：115S035R-RF-US-P05V01 Page: 4 of 114 TABLE OF CONTENTS Description Page 1. General Information.......................................................................................................6 1.1. EUT Description ......................................................................................................6 1.2. Mode of Operation...................................................................................................9 1.3. Tested System Details...........................................................................................10 1.4. Configuration of Tested System.............................................................................11 1.5. EUT Exercise Software..........................................................................................11 2. Technical Test ..............................................................................................................13 2.1. Summary of Test Result.........................................................................................13 2.2. Test Environment...................................................................................................15 3. Conducted Emission....................................................................................................16 3.1. Test Equipment......................................................................................................16 3.2. Test Setup..............................................................................................................16 3.3. Limit.......................................................................................................................17 3.4. Test Procedure ......................................................................................................17 3.5. Uncertainty ............................................................................................................17 3.6. Test Result.............................................................................................................18 4. Radiated Emission.......................................................................................................20 4.1. Test Equipment......................................................................................................20 4.2. Test Setup..............................................................................................................21 4.3. Limit .......................................................................................................................22 4.4. Test Procedure ..............................................…

Text truncated - open the document above for the full version.

Report No： 115S035R-RF-US-P06V01 Page: 116 of 134 20. Appendix 1 – Test Setup Photograph Description: Front View of Conducted Emission Test Setup Description: Back View of Conducted Emission Test Setup Report No： 115S035R-RF-US-P06V01 Page: 117 of 134 Description : Radiated Emission Test Setup for Below 1GHz Description : Radiated Emission Test Setup for 1~18GHz Report No： 115S035R-RF-US-P06V01 Page: 118 of 134 Description : Radiated Emission Test Setup for Above 18GHz