TFKRFDP4852Parking sensor

Page 1 of 1 ADHESIVE Type of product：Adhesive Model NO： NP98-3 Name of the manufacturer： Jiashun Corp. NP98-3 BRAND is an all purpose adhesive for the decoration of business office,family houses and hotels.It is manufactured under the technology and formula from America and the raw materials from France. It is very suitable for bonding the polywood,floor,Formica,furniture and leather products. NP 98-3 BRAND must be applied to the both surfaces which have been cleaned carefullly,after an appropriate drying time (about 10-30 minutes) press or hammer surface together.The surfaces must be presssed and rolled all over when bonding the formica. Storage time: 12 months from the production date. Temperature resistance: Without curing agent 90 0 C with 5% RFE curing agent 120 0 C Vo l u m e : 3 . 5 L±5%

Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Page 1 of 13 Content DOCUMENT Content Technical description Dimension drawing Rating label drawing Circuit Diagram PCB layout Product Photo Bill of materials PAGE 1 2-3 4-6 7 8 9 10-11 12 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Page 2 of 13 INFORMATION DOCUMENT FOR TYPE-APPROVAL OF AN ELECTRIC/ELECTRONIC SUB- ASSEMBLY WITH RESPECT TO ELECTROMAGNETIC COMPATIBILITY ACCORDING ANNEX 2B OF ECE-R10 1 Make (trade name of the manufacturer) : Coligen 2 Type and general commercial description(s) : fWO48R52 - commercial description(s) : Parking sensor - version(s) :Version 1: fWO48 R52 –RFDP4852 (915MHZ) 3 Name and address of the manufacturer :Coligen Corp. No. 1 bldg. ,Guantang Ind. Park, Jingding Zhuhai, Guangdong Province, P.R. China 4 In the case of components and separate technical units, location and method of affixing of the approval mark :label affixed to the housing 5 Address(es) of assembly plant(s) :Coligen Corp. No. 1 bldg. ,Guantang Ind. Park, Jingding Zhuhai, Guangdong Province, P.R. China 6 This ESA shall be approved as a :component 7 Any restrictions of use and conditions for fitting :no restrictions Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Page 3 of 13 Additional information Electrical system rated voltage : DC12V, negative ground This ESA can be used on any vehicle type with the following restrictions : no restrictions Installation conditions :connected to battery and/or reversing lamp circuit This ESA can be used on the following vehicle types : not applicable Installation conditions :--- The specific test method(s) used and the frequency ranges covered to determine immunity were :not applicable frequency range : --- Remark : rating current: 150mA Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 DRW. RFDP4852-01 Dimension drawing Page 4 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 DRW. RFDP4852-02 Dimension drawing Page 5 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 DRW. RFDP4852-03 Dimension drawing Page 6 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 DRW. RFDP4852-04 Rating Label Drawing Page 7 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Page 8 of 13 Circuit Diagram Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 PCB Layout Type: RFDP4852 Page 9 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Page 10 of 13 Product Photo Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Product Photo Page 11 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Bill of materials P/NO. DESCRIPTION QTY. Remark CC1000 Integrated circuit 1 U4 AT89S51/24AI Integrated circuit 1 U1 ATMEGA8L-8AI Integrated circuit 1 U3 14.745MHZ Crystal 1 XT3 8.000MHZ Crystal 1 XT2 14.318MHZ Crystal 1 XT1 IC7805 Regulator 1 U2 RFDP4829 PCB 1 TR SC2712 Transistor 2 Q1,Q2 TR SA1162 Transistor 6 Q3,Q4,Q5,Q6,Q8,Q9 V20672- IFKHPBOW Display 1 LED1 10UF/6.3V Tery Capacitor 2 C04,C11 100UF/6.3V Tery Capacitor 2 C02,C8 BAV99 Double Diode 1 D1 ST4004 Diode 1 D2 47UF/35V Electrolytic Capacitor 1 C10 30P Ceramic Capacitor 2 C05,C06 27P Ceramic Capacitor 4 C4,C5,C14,C15 102P Ceramic Capacitor 6 C3,C13, C28,C31 ,C32,C210 104J Ceramic Capacitor 7 C01,C6,C7,C9,C33,C110,C120 10P Ceramic Capacitor 1 C41 5P Ceramic Capacitor 3 C1, C2,C131 4P Ceramic Capacitor 1 C52 0Ω Resistor 1 L2 5.1Ω/1W Resistor 1 R20 56Ω Resistor 8 R4,R5,R6,R7,R8,R9,R10,R01 2K Resistor 1 R1 3.9K Resistor 9 R2,R12,R13,R14,R15,R17,R18,R19, R21 8.2K Resistor 1 R3 27K Resistor 1 R9 82K Resistor 1 R131 120N Inductor 1 L42 4.7N Inductor 1 L91 1000N Inductor 1 L210 2.5N Inductor 2 L62,L41 12V BUZZER BUZZER 1 BUZZ1 TAA-2PGH835- 130 SWITCH 1 KEY1 DXCL-2512-1-1 Power wire 1 +\- 98-3 gumwater Omnipotent gumwater 1 ANT 502 gumwater gumwater 1 ANT Dedicated ANT RF ANT 1 ANT Page 12 of 13 Coligen Corp. Information folder No. Coligen-fWO48R52 Issuing date: April 1, 2006 Type: RFDP4852 Page 13 of 13

Page 1 of 1



Product Operation Description of RFDP4852 This product is the display part of a parking sensor system, which is designed with ultrasonic technology to assist the driver to parking or reversing the vehicle. This product will be placed on the dashboard of the vehicle for display. It would be operated with the controller part of the parking sensor system. See below picture for the installation information of the system. This product is powered by the same power source, which would be DC 12V from the vehicle lead-acid batteries, as the reverse lights. The main function of the product is to receive the RF signal from controller part of the same system, demodulate the signal and display the distance reading in the LED display segments. RF link is setup between the product and the controller part in 2FSK half-duplex form. While in the power on handshake period, RF signal for controller ID confirmation would be transmitted from the product to the controller. Also while the ‘link’ button is pressed, RF signal for inquiry of the controller part ID will be sent out. It only happens on the first-time operation, and there is no need to press the ‘link’ button again next time unless the controller part is replaced with a new one. Integral antenna is used. The frequency range of the product is 915.11MHz and 916.58MHz. The half-duplex RF link of the system will be auto tuned to one of above channel that is available. What is more, audible beeping would be emitted from the buzzer of the product to alarm the driver of the distance of an object up to 1.5 meters.

Produktsicherheit und –qualität Product Safety and Quality Prüfbericht - Nr.: Test Report No.: 16007417 001 Seite 13 von 15 Page 13 of 15 6 Photographs of the Test Set-Up Photograph 1: Set-up for Radiation Measurement Below 1GHz Produktsicherheit und –qualität Product Safety and Quality Prüfbericht - Nr.: Test Report No.: 16007417 001 Seite 14 von 15 Page 14 of 15 Photograph 2: Set-up for Radiation Measurement Above 1GHz