TFT-IDL750Multifunctional Mobile Computer

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: TFT-IDL750 FCC Rule Part: 15.225 ACS Project Number: 11-0024 Manufacturer: MaxID Corp. Model: iDL750 Manual Product User Guide October 2011 CONTENTS Preface Important information ________________________________________________________________________________3 Licensing and Usage Agreement _______________________________________________________________________4 About this guide_____________________________________________________________________________________5 Precautions and Safety_______________________________________________________________________________6 Getting Started Checking Content____________________________________________________________________________________11 Description of IDL750 parts____________________________________________________________________________12 Description of Accessories____________________________________________________________________________14 Using the IDL750 Working with the IDL750 batteries______________________________________________________________________16 Operating your IDL750________________________________________________________________________________22 Care and Maintenance________________________________________________________________________________28 Specification IDL750 and peripherals High level Specifications__________________________________________________________31 Declarations and Safety Statements Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage_____________________________________34 FCC Radio Frequency Interference Requirements_________________________________________________________34 Federal Communications Commission Statement_________________________________________________________34 RF Exposure Caution Statement_______________________________________________________________________34 Appendix A Glossary of Terms___________________________________________________________________________________36 P R E F A C E Product User Guide 2 How to Use this Manual This Product User Guide contains user instructions for the IDL750 Mobile computing device, software, docking via USB cable, data transfer and battery charging. This Preface section of the manual provides an overview of the manual‟s contents and organisation covering: Important Information LIMITED USE LICENSE AGREEMENT About this Guide: Document Conventions and Notations Safety and Precautions P R E F A C E Product User Guide 3 Important Information Copyright Copyright © 2010 MaxID Corp. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the copyright owner, MaxID Corp., 2731 Prosperity Ave, Suite C, Fairfax, VA 22031 Copyright infringement is a serious matter under the United States of America and foreign Copyright Laws. Trademarks Microsoft ®, is a registered trademark, Windows™, Windows XP™, Windows Vista ™, Windows 7™ and the Windows Logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. UNIX® is a registered trademark of AT&T in the USA and other countries. IBM® is a registered trademark of International Business Machines Corporation. Names of products, brands, etc. appearing in this manual are trademarks or registered trademarks of their respective own companies. Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of MaxID Limited. The Mobile Device described is subject to change without notice. MaxID Limited assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the manual. P R E F A C E Product User Guide 4 LIMITED USE LICENSE AGREEMENT The software program(s) furnished with this MaxID product are licensed only to the end-user (you), and may be used by you only in accordance with the license terms described below. Your use of the programs shall be conclusively deemed to constitute your acceptance of the terms of this License. MaxID Corp has developed or otherwise obtained the programs and hereby licenses their use to you. You assume sole responsibility for the selection of the product (including the associated programs) to achieve your intended results, and for the installation, use and results obtained there from. LICENSE Personal non-transferable and non-exclusive right of usage MaxID herby grants you a personal, non-transferable and non-exclusive right and license to use the programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the programs and related documentation, all of which title, ownership and rights shall remain with MaxID or its suppliers. Programs only to be used on single specific Product You may use the programs only on the single Product which was accompanied by the programs Requirement to protect confidentiality of Programs You and your employees and agents are required to protect the confidentiality of the programs. May not distribute confidentiality of Programs without written consent You may not distribute or otherwise make the programs or related documentation available to any third party, by time-sharing or otherwise, without the prior consent of MaxID Corp. May not copy or reproduce programs and/or documentation of the product You may not copy or reproduce, or permit to be copied or reproduced, the programs or related documentation for…

Text truncated - open the document above for the full version.

7-12-2011 1775 Wiehle Ave, Suite 104 Reston VA 20190 Federal Communications Commission P.O. Box 429 Columbia, MD 21045 Dear Sir or Madam: I hereby appoint Sam Wismer at Advanced Compliance Solutions, Inc. to act as our agent in the preparation of an application for equipment authorization of the iDL750 FCC ID: TFT-iDL750 to the FCC Rules and Regulations. I certify that all exhibits contained within this filing properly describe the device or system for which authorization is sought. I further certify that appropriate arrangements have been made to assure that production units bearing the name and FCC identifier listed in this application will continue to comply with Commission’s requirements. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits , pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Sincerely, Steve Bowen Director/Senior Solutions Architect

7-26-11 1775 Wiehle Ave, Suite 104 Reston VA 20190 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: MaxID respectfully requests confidentiality of certain materials provided with the submission of the iDL750 under FCC ID: TFT-IDL750 in accordance with FCC Regulations 0.457(d) and 47 CFR 0.459 The confidentiality request applies to the following exhibits: 11-0024 - Schematics.pdf 11-0024 - System Block Diagram.pdf 11-0024 - Theory of Operation.pdf Pursuant to DA 04-1705 of the Commission’s public notice, MaxID also requests short-term confidentiality for the following exhibits: 11-0024 - Internal Photos.pdf 11-0024 - External Photos.pdf 11-0024 - Manual.pdf 11-0024 - Test Setup Photos.pdf 11-0024 – SAR Report 1 of 2 – Appendix D-E.pdf 11-0024 – SAR Report 2 of 2 – Appendix E-F.pdf MaxID has requested short term confidentiality of specific sections in the SAR reports because they contain internal and test setup photos of the device. These sections have been submitted in two separate files, as listed above. If prior to 45 days the product goes to market, MaxID will inform the commission so that the short-term confidentiality exhibits can be released to the public record. The iDL750 has been developed at considerable effort and expense by MaxID. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company’s business advantage. I appreciate your assistance in this matter. Sincerely, Name: Steve Bowen Signature: Title: Director/Senior Solutions Architect Date: 7-26-11

5015 B. U. Bowman Dr. Buford, GA 30518 October 3, 2011 ACS TCB 5015 B.U. Bowman Drive Buford, GA 30518 Re: FCC ID: TFT-IDL750 To Whom It May Concern: The following application is submitted on behalf of our client, MaxID Corp, for evaluation of their model iDL750 for certification under FCC Part 15.225. The iDL750 contains a 13.56MHz RFID reader as well as three additional single modular approved devices, GSM/GPRS FCC ID: TFT-MC8795, 802.11b/g FCC ID: TFT533ANM, and Bluetooth FCC ID: TFTWT12. The MaxID Corp iDL750 portable handheld computer was evaluated for RF exposure with results provided in the SAR report included in this application. All radios can transmit simultaneously therefore the iDL750 host has been evaluated for radiated inter- modulation products for all combinations of simultaneous transmission and found to be in compliance. Sincerely, Kirby Munroe Director, Wireless Certifications Advanced Compliance Solutions, Inc.

Advanced Compliance Solutions – 5015 B.U. Bowman Drive, Buford, GA 30518 Phone: (770) 831-8048 Fax: (770) 831-8598 October 3, 2011 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: MaxID Corp respectfully requests confidentiality of certain materials provided with the submission of the iDL750 under FCC ID: TFT-iDL750 in accordance with FCC Regulations 0.459. The following documents have been provided by a third party and require confidential treatment: 11-0024 – Schematics – Third Party.pdf 11-0024 – System Block Diagram – Third Party.pdf 11-0024 – Theory of Operation – Third Party.pdf The iDL750 has been developed at considerable effort and expense by MaxID Corp. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company’s business advantage. I appreciate your assistance in this matter. Sincerely, Sam Wismer Vice President, Technology Agent

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: TFT-iDL750 FCC Rule Part: 15.225 ACS Project Number: 11-0024 Manufacturer: MaxID Corp Model: iDL750 External Photos Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 2 Figure 1: EUT – Front Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 3 Figure 2: EUT – Back Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 4 Figure 3: EUT – Top Figure 4: EUT – Bottom Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 5 Figure 5: EUT – Left Side Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 6 Figure 6: EUT – Right Side

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: TFT-IDL750 FCC Rule Part: 15.225 ACS Project Number: 11-0024 Manufacturer: MaxID Corp. Model: iDL750 Label Information Model(s): iDL750 FCC ID: TFT-IDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 2 Figure 1: Label Sample Model(s): iDL750 FCC ID: TFT-IDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 3 Figure 2: Label Location

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: TFT-IDL750 FCC Rule Part: 15.225 ACS Project Number: 11-0024 Manufacturer: MaxID Corp Model: iDL750 Internal Photos Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 2 Figure 1: Main PCB - Front FCC ID: TFTWT12 (BT) FCC ID: TFT-MC8795 (GSM / UMTS) FCC ID: TFT533ANM (WiFi) Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 3 Figure 2: Main PCB - Back Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 4 Figure 3: PCBs – Front Figure 4: PCBs – Back Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 5 Figure 5: PCBs – Installed, Front Figure 6: PCBs – Installed, Front (Screen Removed) FCC ID: TFT533ANM (WiFi Antennas) Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 6 Figure 7: PCBs – Installed, Back Model(s): iDL750 FCC ID: TFT-iDL750 ACS Project: 11-0024 Advanced Compliance Solutions Page 7 Figure 8: PCBs – Installed, Back (Battery Pack Removed)

Applicant: MaxID Corporation FCC ID: TFT-IDL750 DUT Model: iDL750 DUT Type: Handheld RFID Reader with co-located MC8795 WWAN, 802.11a/b/g/n & Class 2 Bluetooth 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc.Page 1 of 52 Date(s) of Evaluation March 02, 2011 Test Report Serial No. 022311TFT-T1082-S24M Test Report Revision No. Rev. 1.1 (2nd Release) Test Report Issue Date September 28, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Gen. Pop. / Uncontrolled Test Lab Certificate No. 2470.01 DECLARATION OF COMPLIANCE - SAR RF EXPOSURE EVALUATION (FCC) - MC8795 WWAN Test Lab Information Name CELLTECH LABS INC.Address 21-364 Lougheed Road, Kelowna B.C. V1X 7R8 Canada Test Lab Accreditation A2LA ISO/IEC 17025:2005 (A2LA Test Lab Certificate No. 2470.01) Applicant Information Name MAXID CORPORATION Address 1775 W iehle Avenue, Suite 104, Reston, VA 20190 USA Standard(s) Applied FCC 47 CFR §2.1093 IC Health Canada Safety Code 6 FCC OET Bulletin 65, Supp. C (01-01) IEEE1528-2003 FCC KDB Inquiry #907535 KDB 447498 D01v04 FCC KDB 941225 D01v02 FCC KDB 178919 D01v05 Procedure(s) Applied IC RSS-102 Issue 4 IEC 62209-1:200562209-2:2010 Application Type(s) FCC New Certification Device-Under-Test Sample Rcpt Date February 23, 2011 Test Date(s) March 02, 2011 FCC ID: TFT-IDL750 Description Rugged Handheld RFID Reader Model: iDL750 Serial No. BHC00036 Device Under Test (DUT) Tx Freq. 13.56 MHz Rated Power n/a (Low Power Comm. Device Transmitter) FCC ID: TFT-MC8795 DescriptionWWAN Mini-PCI Express Card Manuf. Sierra Wireless Inc. Model MC8795V (IMEI 355310030121218) Mode(s) GPRS/EDGE/W CDMA/HSPA (Rel 6) Co-Transmit Co-transmits with W LAN, Bluetooth, RFID 824.2 - 848.8 MHz (GPRS/EDGE 850 Band) 32 dBm (GPRS 850) 27 dBm (EDGE 850) 1850.2 - 1909.8 MHz (GPRS/EDGE 1900 Band) 29 dBm (GPRS 1900) 26 dBm (EDGE 1900) 826.4 - 846.6 MHz (W CDMA/HSPA 850 Band) 23 dBm (W CDMA 850 - Band V) Co-located Transmitter 1 Tx Freq. 1852.4 - 1907.5 MHz (WCDMA/HSPA 1900 Band) Rated Power 23 dBm (W CDMA 1900 - Band II) FCC ID: TFT533ANM DescriptionWLAN Mini-PCI Express Card Manuf. Intel Corporation Model 533AN_MMW Mode(s) 802.11a/b/g/n Co-Transmit Co-transmits with WWAN Co-located Transmitter 2 Tx Freq. 2412-2462/5180-5320/5500-5700/5745-5825 MHz Rated Power 130 mW (2.4 GHz), 110 mW (5 GHz) - Conducted FCC ID: TFTWT12 Description Class 2 Bluetooth v2.0 + EDR Mode(s) GFSK (1Mbps), ෢/4 DQPSK (2Mbps, 8DQPSK (3Mbps) Model WT12A Manuf. BlueGiga Technologies Inc. Co-Transmit Co-transmits with WWAN Co-located Transmitter 3 Tx Freq. 2402 - 2480 MHz Rated Power 2 mW - Conducted Antenna-to-Antenna Distance WWAN WWAN-to-W LAN = 146 mm WWAN-to-Bluetooth = 125 mm WWAN-to-RFID = 4 mm Antenna-to-Edge Distance(s) WWAN Antenna to Keypad Side = 16 mm Antenna to Bottom Side = 24 mm Antenna to Right Edge = 10 mm Device Position(s) Tested iDL750 PC Front Keypad Side with 10 mm air-gap spacing to planar phantom (per FCC KDB Inquiry Tracking No. 907535) Max. Duty Cycle(s) Tested GPRS 25% (2 Uplink Slots) Class 10 WCDMA 100% Antenna Type(s) Tested WWAN Penta-band SMT Antenna Model: PA-25 Manufacturer: Taoglas Limited P/N: PA-25a Power Source(s) Tested Host PCLithium-ion Battery 7.4V 10000mAh Model: 909T2021F 0.273 W/kg 1g average 850 Band 1.6 W/kg 1g average Max. Measured SAR Level(s) BODY 0.459 W/kg 1g average 1900 Band FCC/IC Spatial Peak SAR Limit General Population / Uncontrolled Celltech Labs Inc. declares under its sole responsibility that this wireless portable device is compliant with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada’s Safety Code 6 for the General Population / Uncontrolled Exposure environment. The device was tested in accordance with the measurement standards and procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01), Industry Canada RSS- 102 Issue 4, IEEE 1528-2003, International Standard IEC 62209-1 (2005) and International Standard IEC 62209-2 (Edition 1.0 2010-03). All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. The results and statements contained in this report pertain only to the device(s) evaluated. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. Test Report Approved By Sean Johnston Lab Manager Celltech Labs Inc. Applicant: MaxID Corporation FCC ID: TFT-IDL750 DUT Model: iDL750 DUT Type: Handheld RFID Reader with co-located MC8795 WWAN, 802.11a/b/g/n & Class 2 Bluetooth 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc.Page 2 of 52 Date(s) of Evaluation March 02, 2011 Test Report Serial No. 022311TFT-T1082-S24M Test Report Revision No. Rev. 1.1 (2nd Release) Test Report Issue Date September 28, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Gen. Pop. / Uncontrolled Test Lab Certificate No. 2470.01 TABLE OF CONTENTS 1.0 INTRODUCTION __________________________________________________________________ 4 2.0 SAR MEASUREMENT SYSTEM ______________________________________________________ 4 3.0 SAR PROBE CALIBRATION & MEASUREMENT FREQUENCIES ___________________________ 4 4.0 TEST MODE & OUTPUT POWER MEASUREMENTS _____________________________________ 5 OUTPUT POWER MEASUREMENTS (Cont.) _______________________________________________ 6 5.0 FLUID DIELECTRIC PARAMETERS __________________________________________________ 7 FLUID DIELECTRIC PARAMETERS (Cont.)________________________________________________ 8 6.0 SAR MEAS…

Text truncated - open the document above for the full version.

Applicant: MaxID Corporation FCC ID: TFT-IDL750 DUT Model: iDL750 DUT Type: Handheld RFID Reader w/ co-located 533AN_MMW 802.11a/b/g/n, WWAN & Class 2 Bluetooth 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc.Page 1 of 80 Date(s) of Evaluation February 25 & 28, 2011 Test Report Serial No. 022311TFT-T1083-S15W Test Report Revision No. Rev. 1.1 (2nd Release) Test Report Issue Date September 28, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Gen. Pop. / Uncontrolled Test Lab Certificate No. 2470.01 DECLARATION OF COMPLIANCE - SAR RF EXPOSURE EVALUATION (FCC) - 533AN_MMW WLAN Test Lab Information Name CELLTECH LABS INC.Address 21-364 Lougheed Road, Kelowna, B.C. V1X 7R8 Canada Test Lab Accreditation A2LA ISO/IEC 17025:2005 (A2LA Test Lab Certificate No. 2470.01) Company Information Name MAXID CORPORATION Address 1775 W iehle Avenue, Suite 104, Reston, VA 20190 USA Standard(s) Applied FCC 47 CFR §2.1093 IC Health Canada Safety Code 6 ICRSS-102 Issue 4 IEC 62209-1:200562209-2:2010 FCC OET Bulletin 65, Supp. C (01-01) IEEE1528-2003 Procedure(s) Applied FCC KDB Inquiry #907535 KDB 447498 D01v04 KDB 248227 D01v01r02 KDB 865664 Rev Application Type(s) FCC New Certification Device-Under-Test Sample Rcpt Date February 23, 2011 Test Date(s) February 25 & 28, 2011 FCC ID: TFT-IDL750 Description Rugged Handheld RFID Reader Model iDL750 Serial No. BHC00036 Device Under Test (DUT) Tx Freq. 13.56 MHz Rated Power n/a (Low Power Comm. Device Transmitter) FCC ID: TFT533ANM Description WLAN Mini-PCI Express Card Manuf. Intel Corporation Model 533AN_MMW (MAC: 00216A184B5C) Mode(s) 802.11a/b/g/n Co-Transmit Co-transmits with WWAN Co-located Transmitter 1 Tx Freq. 2412-2462/5180-5320/5500-5700/5745-5825 MHz Rated Power 130 mW (2.4 GHz), 110 mW (5 GHz) - Conducted FCC ID: TFT-MC8795 DescriptionWWAN Mini-PCI Express Card Manuf. Sierra Wireless Inc. Model MC8795V (IMEI 355310030121218) Mode(s) GPRS/EDGE/W CDMA/HSPA (Rel 6) Co-Transmit Co-transmits with W LAN, Bluetooth, RFID 824.2 - 848.8 MHz (GPRS/EDGE 850 Band) 32 dBm (GPRS 850) 32 dBm (GPRS 850) 1850.2 - 1909.8 MHz (GPRS/EDGE 1900 Band) 29 dBm (GPRS 1900) 29 dBm (GPRS 1900) 826.4 - 846.6 MHz (W CDMA/HSPA 850 Band) 23 dBm (W CDMA 850 - Band V) Co-located Transmitter 2 Tx Freq. 1852.4 - 1907.5 MHz (WCDMA/HSPA 1900 Band) Rated Power 23 dBm (W CDMA 1900 - Band II) FCC ID: TFTWT12 Description Class 2 Bluetooth v2.0 + EDR Mode(s) GFSK (1Mbps), ෢/4 DQPSK (2Mbps, 8DQPSK (3Mbps) Model WT12A Manuf. BlueGiga Technologies Inc. Co-Transmit Co-transmits with WWAN Co-located Transmitter 3 Tx Freq. 2402 - 2480 MHz Rated Power 2 mW - Conducted Antenna-to-Antenna Distance WLAN WLAN-to-WWAN = 146 mm WLAN-to-Bluetooth = 143 mm WLAN-to-RFID = 74 mm Antenna-to-Edge Distance(s) WLAN Antenna to Keypad Side = 10 mm Antenna to Bottom Side = 25 mm Antenna to L/R Edges = 10 mm Device Position(s) Tested iDL750 Front Keypad Side with 10 mm air-gap spacing to planar phantom (per FCC KDB Inquiry Tracking No. 907535) Antenna Type(s) Tested WLAN Embedded BHC Diversity Antenna (Omni-directional) Manufacturer: Y-LAB Model No.: YLM2455-2BHC Power Source(s) Tested iDL750 Lithium-ion Battery 7.4V 10000mAh Model: 909T2021F 802.11a 0.242 W/kg 1g average5500 MHz 1.6 W/kg 1g average 802.11b 0.035 W/kg1g average2462 MHz Max. SAR Levels Measured BODY 802.11n 0.269 W/kg 1g average 5500 MHz FCC/IC Spatial Peak SAR Limit General Population / Uncontrolled Exposure Celltech Labs Inc. declares under its sole responsibility that this wireless portable device is compliant with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada’s Safety Code 6 for the General Population / Uncontrolled Exposure environment. The device was tested in accordance with the measurement standards and procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01), Industry Canada RSS- 102 Issue 4, IEEE 1528-2003, International Standard IEC 62209-1 (2005) and International Standard IEC 62209-2 (Edition 1.0 2010-03). All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. The results and statements contained in this report pertain only to the device(s) evaluated. This test report is not to be reproduced, in whole or in part, without the prior written permission of Celltech Labs Inc. Test Report Approved BySean JohnstonLab Manager Celltech Labs Inc. Applicant: MaxID Corporation FCC ID: TFT-IDL750 DUT Model: iDL750 DUT Type: Handheld RFID Reader w/ co-located 533AN_MMW 802.11a/b/g/n, WWAN & Class 2 Bluetooth 2011 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc.Page 2 of 80 Date(s) of Evaluation February 25 & 28, 2011 Test Report Serial No. 022311TFT-T1083-S15W Test Report Revision No. Rev. 1.1 (2nd Release) Test Report Issue Date September 28, 2011 Description of Test(s) Specific Absorption Rate RF Exposure Category Gen. Pop. / Uncontrolled Test Lab Certificate No. 2470.01 TABLE OF CONTENTS 1.0 INTRODUCTION.....................................................................................................................................................4 2.0 SAR MEASUREMENT SYSTEM.............................................................................................................................4 3.0 SAR PROBE CALIBRATION & MEASUREMENT FREQ. (150MHz - 3GHz).............................................................4 4.0 RF CONDUCTED OUTPUT POWER MEASUREMENTS...............................................................................…

Text truncated - open the document above for the full version.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Test Report FCC ID: TFT-IDL750 FCC Rule Part: 15.225 IC Radio Standards Specification: RSS-210 ACS Report Number: 11-0024.W03.12.A Manufacturer: MaxID Corp. Model: iDL750 Test Begin Date: February 15, 2011 Test End Date: June 24, 2011 Report Issue Date: July 13, 2011 FOR THE SCOPE OF ACCREDITATION UNDER LAB Code 200612-0 This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Prepared by: Kirby Munroe Director, Wireless Certifications ACS, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 20 pages 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 TABLE OF CONTENTS 1 GENERAL ............................................................................................................................................ 3 1.1 PURPOSE .......................................................................................................................................... 3 1.2 PRODUCT DESCRIPTION ................................................................................................................... 3 1.3 TEST METHODOLOGY AND CONSIDERATIONS ................................................................................. 3 2 TEST FACILITIES .............................................................................................................................. 4 2.1 LOCATION ....................................................................................................................................... 4 2.2 LABORATORY ACCREDITATIONS/RECOGNITIONS/CERTIFICATIONS ................................................ 4 2.3 RADIATED EMISSIONS TEST SITE DESCRIPTION .............................................................................. 5 2.3.1 Semi-Anechoic Chamber Test Site .......................................................................................... 5 2.3.2 Open Area Tests Site (OATS) ................................................................................................. 6 2.4 CONDUCTED EMISSIONS TEST SITE DESCRIPTION ........................................................................... 7 3 APPLICABLE STANDARD REFERENCES .................................................................................... 7 4 LIST OF TEST EQUIPMENT ............................................................................................................ 8 5 SUPPORT EQUIPMENT .................................................................................................................... 9 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM ........................................................... 9 7 SUMMARY OF TESTS ..................................................................................................................... 10 7.1 ANTENNA REQUIREMENT – FCC: CFR 47 PART 15.203 ................................................................ 10 7.2 POWER LINE CONDUCTED EMISSIONS – FCC: CFR 47 PART 15.207/ IC RSS-GEN 7.2.4 ............. 10 7.2.1 Measurement Procedure ....................................................................................................... 10 7.2.2 Measurement Results ............................................................................................................ 10 7.3 RADIATED EMISSIONS – INTENTIONAL RADIATION ....................................................................... 12 7.3.1 In-Band Emissions Limitations – FCC Part 15.225(a),(b),(c) / IC RSS-210 A2.6 ............... 12 7.3.1.1 Measurement Procedure ................................................................................................................... 12 7.3.1.2 Measurement Results ....................................................................................................................... 12 7.3.2 Out-of-Band Emissions – FCC Part 15.225(d), 15.209, 15.109 / IC RSS-210 2.5 ............... 14 7.3.2.1 Measurement Procedure ................................................................................................................... 14 7.3.2.2 Distance Correction for Measurements Below 30 MHz – Part 15.31 ............................................... 14 7.3.2.3 Measurement Results ....................................................................................................................... 15 7.3.2.4 Sample Calculation ....…

Text truncated - open the document above for the full version.