TJ7BTK-27Stereo Bluetooth Headset

1 BTK-27 Bluetooth Stereo Headset User Manual BASIC OPERATIONS Turning the headset on/off 1. To turn the headset on Put “ On/off” Button to on, and you will hear a voice “Power on”. The headset is now turned on. 2. To turn the headset off Put “On/off ” Button to off, and you will hear a voice “Power off”. Th e headset is now turn ed off. Pairing Before using your headset for the first time, you must pair it with your Bluetooth devices. 1. Ensure that the headset is turned on (see “To turn the headset on” section). And the Bluetooth devices setting are activated. 2. Press and hold the “MFB 6. You will hear a voice “ connected”, it means your devices have been connected with the headset. ” Button for about 4 seconds until the indicator light alternately flashes blue and red, and you will hear a voice “P airing”, now the headset is under pairing mode. 3. Set your Bluetooth devices to discover the headset by following your devices' guide. Typically, the steps involve going t o a ‘Setup’, ' Connect', o r ‘ Bluetooth’ menu on y our devices and t hen selecting t he option to di scover Bluetooth devices. 4. Your devices will find the headset “BTK -27” and ask if you want to pair with it. Confirm this by pressing the “Yes” or “OK” key. 5. Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK” key. Note: If the Bluetooth version of your Bluetoot devices is up Bluetooth V2.1 , you do not need to enter a Passkey (Pin code) during above pairing process. IMPORTANT: If the pairing can’t be completed within 90 seconds while the pairing mode is activated, which means the pairing is unsuccessful, please repeat Step 1 to Step 6 to pair the headset with the Bluetooth devices again. Pairing Your Headset with Two Bluetooth Devices (Multipoint connecting) BTK-27 supports a Multipoint function to allow simultaneous pairing of the headset with two Bluetooth devices. 1. Follow the pairing procedure as instructed in “Pairing” section to pair the headset with the first Bluetooth device. 2. Repeat the same pairing procedure on the second Bluetooth device. 3. On the first Bluetooth device’s menu, activate its Bluetooth connection with the headset. On/off Button MFB Button Next Button Play/pause Button PREV Button VOL- Button VOL+ Button 2 Play/Pause 1. Make sure that your devices connected with the headset. 2. F ind music in your devices and play, the song will play through the headset. 3. Press “Play/Pause” button once when play, the song will stop. Press “Play/Pause” button again, the song will play again. Previous Song Press “PREV” button to back to the previous song. Next Song Press “NEXT” button to the next song. Adjusting the volume 1. Press “VOL -” to decrease the volume and you will hear a beep when it is minimum 2. Press “VOL+” to increase the volume and you will hear a beep when it is maximum. Making a call 1. Dial number on the keypad or select the contact name from the contact list of your mobile phone. 2. Press phone’s “send/call” key. Voice Dialing Please ensure your mobile phone supports voice dialing function and the voice tag assigned for this feature. 1. Press “MFB ” Button once. 2. You’ll then hear a voice “ Voice Dial”, say the name of the person you wish to call. 3. P ress “ MFB ” Button once to stop the voice dialing. Ending a call Shortly press “MFB ” Button once to end a call Answering a call Connected with one mobile phone: Shortly press “MFB ” B utton once to answer a call. Connected with two mobile phones: 1. Press “ MFB ” button once to answer the second call but end the first call. 2. Press “ MFB ” button twice to answer the second call and keep the first call. 3. Press “ MFB ” button for 2 seconds to reject the second call but go on the fist call. 4. Press “ MFB ” button twice to transfer the two calls if the first mobile phone keep a call and the second mobile phone answer a call. Last number redialing Connected with one mobile phone: Press “MFB ” Button twice to make the last number redial, and you will hear a voice “Last Number Redial”. Connected with two mobile phones: Pr ess “ MFB ” Button twice to make the last number redial, and you will hear a voice “Last Number Redial”. This 3 feature will be available on only one mobile phone which is firstly connected with mobile phone. Rejecting an incoming call Press and hold “MFB ” Button for 2 seconds to reject a call. Transferring a call Headset to phone: Press and hold “MFB ” Button for 2 seconds during a call, then release it. Phone to headset: Press and hold “MFB ” Button for 2 seconds during a call, then release it. Note: For different mobile phone setting, you could only transfer a call by press the mobile phone’s keypad. Depend on your phone type, the actual operation may vary. Muting the Microphone You can put a call on hold by muting the microphone. To turn on/turn off the Muting Microphone function: Press the “V OL+” Button and “V OL-” Button at the same time. Delete the pairing records When the headset is on standby mode, press “VOL+” Bu tton and “VOL -” Button for 4 seconds. Adjust the EQ When the headset is on play mode, press “NEXT” button for 2 seconds, it will switch circularly among “normal”, “bass”, “treble”. Storage of the headset 1. Always store the headset with the power off and make sure it is safely protected. 2. Avoid storage at high temperatures (above 60°C) such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can damage performance and reduces battery life). 3. Do not expose the headset or any of its supplied parts to rain or other liquids. Product Specifications Bluetooth Version4.0 Support B luetooth HSP, HFP, A2DP and AVRCP Profiles Connect with two Bluetooth devices at the same time Micro USB charging port Operating Range: up to 30 feet (10 meters) Frequency responds range: 2.402-2.48GHz Play time: 5 hours Talk time: 5 hours Standby t ime: 1 20 hours Setting bass boost Indicate the battery of the speaker on iPhone products Support voice prompt for MMI: Power on/powe…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Company Name: Shenzhen SHI KISB Electronic Co., Ltd. Address: 3-5F, A Building, Shanghe Industrial Zone, Nanchang Road, Bao'an District, Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s),including signing of 731 form: Product description: Stereo Bluetooth Headset Type designation: BTK-27;BTK-26;BTK-25; Brand: KISS; BTK，Lindero on our behalf. Signature: KK.Lee Shenzhen SHI KISB Electronic Co., Ltd. Tel: 0086-755-27472066 Fax: 0086-755-27470811 E-mail: [email protected] 2013/8/21 Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Иل SS SS The part where the label is placed can not be removed or detached.

Neutron Engineering Inc. Project No.: 1307C345 Page 5 of 9 Neutron Engineering Inc. Project No.: 1307C345 Page 6 of 9 Neutron Engineering Inc. Project No.: 1307C345 Page 7 of 9 Neutron Engineering Inc. Project No.: 1307C345 Page 8 of 9 Neutron Engineering Inc. Project No.: 1307C345 Page 9 of 9

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 1 of 62 FCC Radio Test Report FCC ID: TJ7BTK-27 This report concerns (check one): Original Grant Class II Change Issued Date : Aug. 08, 2013 Project No. : 1307C345 Equipment : Stereo Bluetooth Headset Model Name : BTK-27; BTK-26; BTK-25 Applicant : ShenZhen SHI KISB Electronic Co., LTD Address : 3-5F, A Building, Shanghe Industrial Zone, Nanchang Road, Bao’an District, Shenzhen, China Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jul. 31, 2013 Date of Test: Jul. 31, 2013 ~ Aug. 07, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 2 of 62 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 3 of 62 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 19 4.2.1 RADIATED EMISSION LIMITS 19 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 20 4.2.3 TEST PROCEDURE 21 4.2.4 DEVIATION FROM TEST STANDARD 21 4.2.5 TEST SETUP 22 4.2.6 EUT OPERATING CONDITIONS 23 4.2.8 TEST RESULTS-BETWEEN 30MHZ AND 1000MHZ 25 4.2.7 TEST RESULTS (ABOVE 1000 MHZ) 32 5 . BANDWIDTH TEST 44 5.1 APPLIED PROCEDURES / LIMIT 44 5.1.1 MEASUREMENT INSTRUMENTS LIST 44 5.1.2 TEST PROCEDURE 44 5.1.3 DEVIATION FROM STANDARD 44 5.1.4 TEST SETUP 44 5.1.5 EUT OPERATION CONDITIONS 44 5.1.6 TEST RESULTS 45 6 . MAXIMUM OUTPUT POWER TEST 47 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 4 of 62 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 47 6.1.1 MEASUREMENT INSTRUMENTS LIST 47 6.1.2 TEST PROCEDURE 47 6.1.3 DEVIATION FROM STANDARD 47 6.1.4 TEST SETUP 47 6.1.5 EUT OPERATION CONDITIONS 47 6.1.6 TEST RESULTS 48 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 50 7.1 APPLIED PROCEDURES / LIMIT 50 7.1.1 MEASUREMENT INSTRUMENTS LIST 50 7.1.2 TEST PROCEDURE 50 7.1.3 DEVIATION FROM STANDARD 50 7.1.4 TEST SETUP 50 7.1.5 EUT OPERATION CONDITIONS 50 7.1.6 TEST RESULTS 51 8 . POWER SPECTRAL DENSITY TEST 56 8.1 APPLIED PROCEDURES / LIMIT 56 8.1.1 MEASUREMENT INSTRUMENTS LIST 56 8.1.2 TEST PROCEDURE 56 8.1.3 DEVIATION FROM STANDARD 56 8.1.4 TEST SETUP 56 8.1.5 EUT OPERATION CONDITIONS 56 8.1.6 TEST RESULTS 57 9 . EUT TEST PHOTO 59 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 5 of 62 1. CERTIFICATION Equipment : Stereo Bluetooth Headset Brand Name : KISS; BTK; Lindero Model Name : BTK-27; BTK-26; BTK-25 Applicant : ShenZhen SHI KISB Electronic Co., LTD Manufacturer : SHENZHEN SHI KISB ELECTRONIC CO.,LTD Address : 3-5/F, A Building, Shanghe Industrial Park, Nanchang Road, Xixiang Town, Bao’an District, Shenzhen, Guangdong, 518103 P.R.China Factory : SHENZHEN SHI KISB ELECTRONIC CO.,LTD Address : 3-5/F, A Building, Shanghe Industrial Park, Nanchang Road, Xixiang Town, Bao’an District, Shenzhen, Guangdong, 518103 P.R.China Date of Test : Jul. 31, 2013 ~ Aug. 07, 2013 Test Item : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C(15.247) / ANSI C63.4-2009 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1307C345) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 6 of 62 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15 (15.247) , Subpart C Standard(s) Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spuriou…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 59 of 62 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 60 of 62 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 61 of 62 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1307C345 Page 62 of 62 Radiated Measurement Photos Above 1000MHz