TQ6BTAV201Bluetooth Multi-mode AV Adapter

Flaircomm Technologies Inc. AV Adapter User Manual Model：BlueTone™BTAV201 Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited. The company reserves rights to make any changes and improvements to the product described in this document without prior notice. - 1 - Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China Telephone: 86-21-51088733 Fax: 86-21-50276101 www.flaircomm.com Flaircomm Technologies Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning The equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Warning： Users should not make changes or modify the device in any way. Changes or modifications without expressly approved by the party responsible for compliance could void the user’s authority to operate the device. - 2 - Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China Telephone: 86-21-51088733 Fax: 86-21-50276101 www.flaircomm.com Flaircomm Technologies Inc. - 3 - Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China Telephone: 86-21-51088733 Fax: 86-21-50276101 www.flaircomm.com ------ Introduction ----------------------------------------------- Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments, such as mobile phone, PDA、PC, headset, mouse, keyboards, printer, etc. can wirelessly communicate with each other via Bluetooth connection. To ensure worldwide compatibility, Bluetooth operates on the globally available ISM (Industrial Scientific and Medical) frequency band. Within 2.4 GHz and 2.48 GHz, Bluetooth transmits data up to either 10 meters (CLASS II mode) or 100 meters (CLASS I mode) using 79 frequency hopping channels. Though line-of-sight is not required, Bluetooth connections could be subject to interferences from obstructions such as walls, human bodies, and other electronic devices. In addition, due to variations on product implementation, it is likely that Bluetooth equipments from different manufactures have interoperability issues. In that case, you may consult with manufactures to check product compatibility. Note that, there could be some restrictions imposing on using Bluetooth devices in some countries. Please check with your local authorities. Product Features ™ Bluetooth 2.0 specification compliant, interference-tolerable with WLAN devices ™ Class I, operation range up to 100 meters (330 feet) ™ As a multi-mode Bluetooth AV adapter, it supports transmitter mode and receiver mode ™ In transmitter mode, it can be used with any multimedia player with stereo output, and send the music to the Bluetooth-enabled speakers or headsets. ™ In receiver mode, it can be used with any speaker system with stereo input, and accept the music from Bluetooth multimedia devices ™ Data rate up to 721 Kbps ™ User friendly and plug-and-play Overview Figure 1 Overview 1 2 3 6 4 7 5 Flaircomm Technologies Inc. - 4 - Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China Telephone: 86-21-51088733 Fax: 86-21-50276101 www.flaircomm.com 1. On/off, to turn on/off the device. 2. Pair, to activate the paring mode of the device. 3. Receive/Transmit 4. Reset 5. 8-pin USB port, to connect the charging cable or line-in/line-out cable. 6. Red LED, to indicate that the device is in transmitter mode or in charging mode. 7. Blue LED, to indicate that the device is in receiver mode. Accessory There is a multifunctional connecting cable in the package (referring to Figure 2). One side of the connecting cable is an 8pin USB port which can be connected to the adapter. The other side of the connecting cable has three ports. They are USB port, Line-in port, and Line-out port. Figure 2 Multifunctional Connecting Cable Please refer to following sections for details of using. ------ Getting…

Text truncated - open the document above for the full version.

Shanghai Flaircomm Technologies Inc Date: January 28, 2008 Federal Communications Commission Authorization and Evaluation Division FCC ID: TQ6BTAV201 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Dawen /Hardware Shanghai Flaircomm Technologies Inc

Data January 28, 2008 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 SuZhou EMC laboratory of QuitTek Technology (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China To Whom It May Concern: Shanghai Flaircomm Technologies Inc.,the undersigned, hereby authorizes QuitTek Technology (Suzhou) Co., Ltd., to act on the behalf of Shanghai Flaircomm Technologies Inc. . Solely in matters relating to the application for an FCC equipment authorization for FCC ID: TQ6BTAV201 including the signing of documents in connection with this Application. Necessary acts carried out by Shanghai Flaircomm Technologies Inc.. On out behalf of Shanghai Flaircomm Technologies Inc.. In connection with the Application shall have the same effect as acts of Shanghai Flaircomm Technologies Inc. . Shanghai Flaircomm Technologies Inc.Also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a) Yours Sincerely, Dawen Yang / Hardware Shanghai Flaircomm Technologies Inc.

Bluetooth Multi-mode AV Adapter(M/N:BTAV201) EUT Photograph-External Photographs (1) EUT Photo (2)EUT Photo (3)EUT Photo (4)EUT Photo (5)EUT Photo (6)EUT Photo (7)EUT Photo (8)EUT Photo (9)EUT Photo

Bluetooth Multi-mode AV Adapter(M/N:BTAV201) EUT Photograph-Internal Photographs (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo

RF Exposure Evaluation Declaration Product Name ： Bluetooth Multi-mode AV Adapter Model No. ： BTAV201 FCC ID ： TQ6BTAV201 Applicant ： Shanghai Flaircomm Technologies Inc. Address ： No.5, Bibo Road, Keyuan Building 4F, Zhangjiang Hi-Tech Park, Shanghai 201203 P.R.China Date of Receipt ： 2007/09/10 Issued Date ： 2008/01/23 Report No. ： 079S037-RF-US The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by CNLA, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 079S037-RF-US Page: 2 of 5 Test Report Certification Issued Date : 2007/01/23 Report No. : 079S037-RF-US Product Name : Bluetooth Multi-mode AV Adapter Applicant : Shanghai Flaircomm Technologies Inc. Address : No.5, Bibo Road, Keyuan Building 4F, Zhangjiang Hi-Tech Park, Shanghai 201203 P.R.China Manufacturer : Shanghai Flaircomm Technologies Inc. Model No. : BTAV201 FCC ID : TQ6BTAV201 Rated Voltage : AC 120V/60Hz EUT Voltage : AC 100-240 V / 50-60 Hz Trade Name : ZDC Applicable Standard : FCC OET 65 Test Result : Complied Performed Location : SuZhou EMC laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : ( Any Liu ) Reviewed By : ( Dream Cao ) Approved By : ( Murphy Wang ) Report No： 079S037-RF-US Page: 3 of 5 Laboratory Information We , QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited by the following accreditation Bodies in compliance with ISO 17025, EN 45001 and Guide 25: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://tw.quietek.com/modules/myalbum/ The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : +886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, DGT, CNLA Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No： 079S037-RF-US Page: 4 of 5 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No： 079S037-RF-US Page: 5 of 5 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : Bluetooth Multi-mode AV Adapter Test Item : RF Exposure Evaluation Test Site : AC-3 Test Mode : Mode 1: Transmit Antenna Gain: Antenna Gain: The maximum Gain measured in fully anechoic chamber is -3.5dBi or 0.45 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 00 2402.00 56.2341 0.004997 39 2441.00 34.9945 0.003110 78 2480.00 18.8799 0.001678 Note: The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2.

Test Report Product Name ： Bluetooth Multi-mode AV Adapter Model No. ： BTAV201 FCC ID ： TQ6BTAV201 Applicant ： Shanghai Flaircomm Technologies Inc. Address ： No.5, Bibo Road, Keyuan Building 4F, Zhangjiang Hi-Tech Park, Shanghai 201203 P.R.China Date of Receipt ： 2007/09/10 Issued Date ： 2008/01/23 Report No. ： 079S037-RF-US-P06V01 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by CNLA, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 079S037-RF-US-P06V01 Page: 2 of 85 Test Report Certification Issued Date : 2008/01/23 Report No. : 079S037-RF-US-P06V01 Product Name : Bluetooth Multi-mode AV Adapter Applicant : Shanghai Flaircomm Technologies Inc. Address : No.5, Bibo Road, Keyuan Building 4F, Zhangjiang Hi-Tech Park, Shanghai 201203 P.R.China Manufacturer : Shanghai Flaircomm Technologies Inc. Model No. : BTAV201 FCC ID : TQ6BTAV201 Rated Voltage : AC 120 V / 60 Hz EUT Voltage : DC 3.7V Trade Name : Flaircomm Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2007 ANSI C63.4: 2003 Test Result : Complied Performed Location : SuZhou EMC laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : ( Kayla Kan ) Reviewed By : ( Dream Cao ) Approved By : ( Murphy Wang ) Report No： 079S037-RF-US-P06V01 Page: 3 of 85 Laboratory Information We , QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited by the following accreditation Bodies in compliance with ISO 17025, EN 45001 and Guide 25: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://tw.quietek.com/modules/myalbum/ The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : +886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, DGT, CNLA Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No： 079S037-RF-US-P06V01 Page: 4 of 85 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................... 6 1.1. EUT Description ........................................................................................... 6 1.2. Mode of Operation........................................................................................ 8 1.3. Tested System Details .................................................................................. 9 1.4. Configuration of Tested System.................................................................. 10 1.5. EUT Exercise Software............................................................................... 11 2. Technical Test ........................................................................................................... 12 2.1. Summary of Test Result.............................................................................. 12 2.2. Test Environment........................................................................................ 13 3. Conducted Emission................................................................................................. 14 3.1. Test Equipment........................................................................................... 14 3.2. Test Setup .................................................................................................. 14 3.3. Limit............................................................................................................ 15 3.4. Test Procedure ........................................................................................... 15 3.5. Uncertainty ................................................................................................. 15 3.6. Test Result.................................................................................................. 16 3.7. Test Photograph ......................................................................................... 22 4. Radiated Emission .................................................................................................... 23 4.1. Test Equipment........................................................................................... 23 4.2. Test Setup .................................................................................................. 23 4.3. Limit............................................................................................................ 24 4.4. Test Procedure ........................................................................................... 25 4.5. Uncertainty ................................................................................................. 25 4.6. Test Result.................................................................................................. 26 4.7. Test Ph…

Text truncated - open the document above for the full version.

Bluetooth Multi-mode AV Adapter(M/N:BTAV201) Test Photograph Test Mode: Mode 1: Transmit Description: Front View of Conducted Test Test Mode: Mode 1: Transmit Description: Back View of Conducted Test Test Mode: Mode 1: Transmit Description: Front View of Radiated Test for Under 1GHz Test Mode: Mode 1: Transmit Description: Back View of Radiated Test for Under 1GHz Test Mode: Mode 1: Transmit Description: Front View of Radiated Test for Above 1GHz Test Mode: Mode 1: Transmit Description: Back View of Radiated Test for Above 1GHz