TW5GD7067Digital Wireless Camera System

60g 66 X 35 X 12mm DC 12~24V 50M (MAX.) 2400~2483.5MHz 4.4 (20dB BW) QPSK +18dBm @ QPSK EVM 8% -72dB OOOO -10C~+50C/14F~122F 15%~85%RH 60g 66 X 35 X 12mm DC 12V@250mA; DC24V@150mA DC 12~24V 50M (MAX.) 2400~2483.5MHz 4.4 (20dB BW) QPSK +18dBm@QPSK EVM 8% -72dB IP66 65mA±10 1Vp-p±0.2@75Ω <0.5 Lux OO 80(NTSC), 82(PAL) DC12V±0.5V 1Vp-p±0.2 1/4" CMOS 656 X 488 NTSC/PAL Model: 8902JN 8902JN = GL8902(Camera)+GT4067(Transmitter)+GD7067(Receiver) WGL8902ired camera: X 1 Wireless receiver)(GD7067 Wireless transmitter)(GT4067 Wired camera(GL8902) Wireless Transmitter (GT4067) Wired camera (GL8902) Wireless Receiver )(GD7067 Display or Monitor Black line Red line Power input (Connected with a cigarette lighter) Indicator Antenna Connect the vehicle power supply Bracket Camera Lens Prompt: Transmitter Receiver Quick Start Guide Camera Camera Transmitter Receiver Unobstructed Effective Range Unobstructed Effective Range Power Supply Weight Receiving Sensitivity Weight Dimensions (W X D X H) Receiving Sensitivity Power Supply Video output Dimensions (W X D X H) Operation Humidity Operation Temperature Transmission Power Transmission Power Modulation/Demodulation Mode Modulation/Demodulation Mode Image Sensor Effective Pixels Video Format Minimum illumination View Angle Consumption Current Video output Power Supply Waterproof Capacity Consumption Current Transmission Frequency Transmission Frequency Data Bandwidth Data Bandwidth Packing List: Specifications: Product Structure:Installation Wired Camera: Video Output Video Input Pairing Video Output Indicator Antenna Pairing 1. In the proper position of rear license plate drill a screw hole for mounting screw. 2. Use a screwdriver to the first screw is screwed into the screw hole of the drilled. 3. Move the camera orientation to adjust the display effect. 4. After adjustment, second screw drill, mount and tighten the screws, the camera is installed. Wiring diagram and the pairing setting: Wired camera+Wireless transmitter: Rear lamp Wireless receiver: Cigarette lighter power supply Video input Wireless Receiver Wireless Transmitter 1, this product is suitable for 12V power car; 2, please find auto electrician to install this product; 4, broken wiring must be insulated. 3, the wire harness to avoid high temperature and high pressure location; Wireless receiver: GD7067 X 1 Pairing: To pair the TX box and RX box successfully. please follow the instructions below accordingly. 1. Press and hold the pairing button on the TX box for 3sec. The indicator light will start flashing. 2. Within 30sec of flashing time. Press and hold the pairing button on the RX box for 3sec until the indicator light flashes. 3. Once both TX box and RX box are successfully paired. the indicator lights on TX box and RX box will stop flashing. Pair buttonPair button Wireless transmitter: X 1GT4067 FCC Warning Statements: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. “RF Exposure Guidance: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be operated with a minimum distance of 20cm between the radiator and persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.”

Date (31/12/2013) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, ShenZhen Gospell Smarthome Electronic Co., Ltd, hereby authorize Mr. Hans Hu, Global United Technology Services Co., Ltd. ( Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong ) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 2014/6/30. Sincerely, Company Officer: Peter Luo Telephone Number: +86 755-29980909 Email: [email protected]

Date (31/12/2013) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: TW5GD7067 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, ShenZhen Gospell Smarthome Electronic Co., Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block diagrams Operating description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Peter Luo Telephone Number: +86 755-29980909 Email: [email protected]

Date (31/12/2013) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, ShenZhen Gospell Smarthome Electronic Co., Ltd, hereby authorize Mr. Hans Hu, Global United Technology Services Co., Ltd. ( Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong ) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 2014/6/30. Sincerely, Company Officer: Peter Luo Telephone Number: +86 755-29980909 Email: [email protected]

Date (31/12/2013) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: TW5GD7067 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, ShenZhen Gospell Smarthome Electronic Co., Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block diagrams Operating description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Peter Luo Telephone Number: +86 755-29980909 Email: [email protected]

Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 34 of 38 9 EUT Constructional Details External view photo Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 35 of 38 Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 36 of 38

Label Information: Size: L3cm*W1.5cm Label Location: Digital Wireless Camera System Model: GD7067 Input: DC12V/24V, 250mA FCC ID: TW5GD7067 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 37 of 38 Internal view photo Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 38 of 38 ------End------

1. RF Exposure Evaluation 1.1 Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi =3.1415926 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2 Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 1.3 Test Result of RF Exposure Evaluation Channel Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2403 21.1349 0.005293 1.0 PASS 2442 22.5424 0.005646 1.0 PASS 2478 21.8776 0.005479 1.0 PASS Remark: antenna gain=1.0 dBi

Global United Technology Services Co., Ltd. Report No.: GTSE13120198501 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover Page FCC Report (FHSS) Applicant: SHENZHE GOSPELL SMARTHOME ELECTRONIC CO., LTD Address of Applicant: 5 Floor/Block 2, Vision(SZ) Park, Hi-Tech, Industrial Park, Shenzhen, 518057, China Equipment Under Test (EUT) Product Name: Digital Wireless Camera System Model No.: GD7067 FCC ID: TW5GD7067 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247:2012 Date of sample receipt: December 23, 2013 Date of Test: December 23-31, 2013 Date of report issued: December 31, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 38 2 Version Version No. Date Description 00 December 31, 2013 Original Prepared By: Date: December 31, 2013 Project Engineer Check By: Date: December 31, 2013 Reviewer Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 38 3 Contents Page 1 COVER PAGE ........................................................................................................................................................ 1 2 VERSION ................................................................................................................................................................. 2 3 CONTENTS ............................................................................................................................................................. 3 4 TEST SUMMARY ................................................................................................................................................... 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ...................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT .................................................................................................................... 5 5.3 TEST MODE ...................................................................................................................................................... 7 5.4 TEST FACILITY ................................................................................................................................................. 7 5.5 TEST LOCATION ............................................................................................................................................... 7 5.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ................................................................................ 7 5.7 DESCRIPTION OF SUPPORT UNITS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ................................................................................................................................. 8 7 TEST RESULTS AND MEASUREMENT DATA ............................................................................................... 9 7.1 ANTENNA REQUIREMENT ................................................................................................................................. 9 7.2 CONDUCTED EMISSIONS ............................................................................................................................... 10 7.3 CONDUCTED PEAK OUTPUT POWER ............................................................................................................ 11 7.4 20DB EMISSION BANDWIDTH ........................................................................................................................ 13 7.5 CARRIER FREQUENCIES SEPARATION .......................................................................................................... 15 7.6 HOPPING CHANNEL NUMBER ........................................................................................................................ 17 7.7 DWELL TIME ....................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: GTSE13120198501 Global United Technology Services Co., Ltd. Project No.: GTSE131201985RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 33 of 40 8 Test Setup Photo Radiated Emission