TWNZF01-BDATA TRANSCEIVER

NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD ADDRESS ：#928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO TELE PHONE：0574 88046201 FAX：0574-88046202 ZF01-B Wireless Module Operation Manual Figure 1. ZF01-B wireless module z Features： 1． Providing TTL level UART interface 2. Low power RF transmission：Maximum transmit power 10mW 3. GFSK/FSK modulation mode 4. Crystal frequency stabilization. 5. High-efficiency forward error correction channel encoding technology is used. z Main Application Areas： 1. AMR – Automatic Meter Reading 2. Wireless alarm and security systems 3. Wireless POS, PDA 4. Long-distance non-contact RF smart cards, RFID tags. 5. Wireless Field Bus、wireless conference voting system z Main Technical Specifications： RF channels 433.05MHz modulation mode GFSK baud rate 9600bps output power 10mW NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD ADDRESS ：#928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO TELE PHONE：0574 88046201 FAX：0574-88046202 Interface data format UART ,8E1/8N1 data format Power supply DC 3.6V---5V current consumption Receive mode: 17mA； Transmit mode: 35mA overall dimensions 52 X 26mm Figure 2. interface and sizes z Connector Description： Module provides a 5-pin connector, as shown in the Figure 2，definitions and connection methods of the connector are as followed: number module enddescription level connection terminal notes 1 GND Power ground Power ground 2 VCC Power supply positive（DC） +3.6-5V 3 IN Serial data Receive port TTL TXD 4 OUT Serial data Transmit port TTL RXD NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD ADDRESS ：#928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO TELE PHONE：0574 88046201 FAX：0574-88046202 5 SGND Signal ground Signal ground Can be connected with the power ground z Channel setting There is one group of 5-bit short-circuiter wire (JP2) as shown in Figure 2, defined as A、 B 、C、D、E respectively，A and B are used for setting channels. “0”= short, “1”= open A B channel frequency(MHz) 1 1 4 433.05 z Communication Interface Description： A B 1 2 3 4 5 MCU GND VCC TX RX GND A B 1 2 3 4 5 MCU GND VCC TX RX GND Wireless communication channel setting Figure 3. wireless communication application diagram NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD ADDRESS ：#928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO TELE PHONE：0574 88046201 FAX：0574-88046202 z FCC STATEMENTS 1, Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2, This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

AGENCY AUTHORIZATION LETTER Date: 2010-02-07 FCC ID: TWNZF01-B To whom it may concern: We, the undersigned, hereby authorize SHENZHEN HUATONGWEI INTERNATIONAL INSPECTION CO., LTD of China to act on our behalf, as our agent in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification, Any act carried out by SHENZHEN HUATONGWEI INTERNATIONAL INSPECTION CO., LTD within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely, Print Name: Andy Kaoh Title: General Manager Tel: 714-668-9988 Fax: 714-668-9898 E-mail: [email protected] Company Name: Pro-Lite, Inc.

Modular Approval Request Letter 2010-2-7 Dear Application Examiner, Pro-Lite, Inc. It’s Data Transceiver Module, FCC ID：TWNZF01-B , would like to have your authorization as a limited modular approval specific to the computer device such as Transceiver. The requirements of section 15.212 have been met and shown on the following statements. Per the Part 15.212 of the FCC Rules for Part 15 Unlicensed Modular Transmitter approval the following information is provided: 1) Part 15.212 of the FCC Rules Page 2 Item 1: The modular transmitter has no RF shielding, please see photos of EUT. 2) Part 15.212 of the FCC Rules Page 2 Item 2: The modular transmitter has no buffered modulation data inputs. The EUT has buffered data inputs, it is integrated in chip MCU data processing unit. 3) Part 15.212 of the FCC Rules Page 2 Item 3: The modular transmitter has it’s own power supply regulation. And the input voltage is between 4~10V. 4) Part 15.212 of the FCC Rules Page 2 Item 4: The EUT use of a nonstandard antenna connector (SMA-B). Please see the photos of antenna in the test report. 5) Part 15.212 of the FCC Rules Page 2 Item 4: The antenna of EUT used with the module be approved with the module. 6) Part 15.212 of the FCC Rules Page 2 Item: The modular transmitter was tested in a stand-alone configuration outside the host device and operation conditions with the representative end product. Both of this two configurations were found met all the applicable Part 15 requirements. please see section photographs of test configuration in the test report. 7) Part 15.212 of the FCC Rules Page 2 Item: The module is AC powered, it comply with the AC line conducted requirements found in Section 15.207. Please see test report. 8) Part 15.212 of the FCC Rules Page 2 Item: AC, DC, and data input/output lines not contain ferrites. 9) Part 15.212 of the FCC Rules Page 2 Item: The module have its own FCC ID: TWNZF01-B and the module installed inside a host, the outside have a label referring to the enclosed module. Please see exhibition Label Sample for the FCC ID of this module. 10) Part 15.212 of the FCC Rules Page 2 Item: The modular comply with rules and operating requirements. Please see the user manual. 11) Part 15.212 of the FCC Rules Page 2 Item: The EUT is lower power device, compliant with RF exposure requirements. Needn’t MPE estimation result. 12) Part 15.212 of the FCC Rules Page 2 Item: When approved, The word “module” will be added to the Remarks section of the grant. Sincerely, Pro-Lite, Inc Print Name: Andy Kaoh Title: General Manager

Request for Confidentiality Federal Communications Commission Authorization and Evaluation Division Date: 2010-02-07 FCC ID: TWNZF01-B Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this application as outlined below: 1. Block diagram 2. Schematics 3. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might to harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Print Name: Andy Kaoh Title: General Manager Company Name: Pro-Lite, Inc.

V1.0 Page 34 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd Photos of the EUT V1.0 Page 35 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd

Lable of Module FCC Lable Lable location FCC ID: TWNZF01-B FCC ID: TWNZF01-B Label of host FCC Lable Lable location Lable location

V1.0 Page 34 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd Photos of the EUT V1.0 Page 35 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd

FCC TEST REPORT Part 15 Subpart C FCC ID .............................................: TWNZF01-B Report Reference No......................: WE10020004 Compiled by ( position+printed name+signature)..: File administrators Wenliang Li Supervised by ( position+printed name+signature)..: Test Engineer Cary Li Approved by ( position+printed name+signature)..: Manager Jimmy Li Date of issue.....................................: Feb 26, 2010 Testing Laboratory Name..............: Shenzhen Huatongwei International Inspection Co., Ltd Address.............................................: Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Applicant’s name............................: Pro-Lite, Inc. Address.............................................: 3505 Cadillac Ave. Building D Manufacturer’s name.....................: NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD Address.............................................: #928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO Test specification: Standard ...........................................: FCC Part Subpart 15C 2008 – Intentional Radiators ANSI C63.4 - 2003 TRF Originator ..................................: Shenzhen Huatongwei International Inspection CO., Ltd Master TRF.......................................: Dated 2006-06 Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader’s interpretation of the reproduced material due to its placement and context. Equipment Under Test .................. : Wireless Module Trade Mark .......................................: / Model/Type reference.......................: ZF01-B Listed Models ..................................: / Result................................................: Complied V1.0 Page 2 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd T E S T R E P O R T Test Report No. : WE10020004 Feb 26, 2010 Date of issue Equipment under Test : Wireless Module Model /Type : ZF01-B Listed Models : / Applicant : Pro-Lite, Inc. Address : 3505 Cadillac Ave. Building D Manufacturer : NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD Address : #928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO SUMMARY OF STANDARDS AND RUSELT No. Test Item Test Standards and Procedure Result 1 AC Conducted Emission FCC Subpart 15C§15.207 Complied 2 Radiated Emission FCC Subpart 15C§15.209 FCC Subpart 15C§15.231(e) ANSI C63.4-2003 section 13.1.4 Complied 3 Deactivation Time FCC Subpart 15C§15.231(e) Complied 4 20dB Bandwidth FCC Subpart 15C§15.231(c) ANSI C63.4-2003 section 13.1.7 Complied 5 Antenna Requirement FCC Subpart 15C§15.203 Complied NOTE: 1),The detailed test rusult please see section 4. 2),The test report merely corresponds to the test sample. 3),It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd Contents 1. TEST STANDARDS .................................................................. 4 2. SUMMARY............................................................................. 5 2.1. General Remarks 5 2.2. Equipment Under Test Power Supply 5 2.3. Short description of the Equipment under Test 5 2.4. EUT operation mode 5 2.5. Configuration of Tested System 6 2.6. Related Submittal(s) / Grant (s) 7 2.7. Modifications 7 3. TEST ENVIRONMENT............................................................... 8 3.1. Address of the test laboratory 8 3.2. Test Facility 8 3.3. Environmental conditions 9 3.4. Statement of the measurement uncertainty 9 3.5. Equipments Used during the Test 10 4. TEST CONDITIONS AND RESULTS ............................................ 11 4.1. AC Conducted Emission 11 4.2. Radiated Emission 16 4.3. Deactivation Time 27 4.4. 20dB Bandwidth 29 4.5. Antenna Requirement 31 5. TEST SETUP PHOTOS OF THE EUT .......................................... 32 6. PHOTOS OF THE EUT............................................................. 34 V1.0 Page 4 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15 Subpart C (2008) – Intentional Radiators ANSI C63.4 (2003) – American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz V1.0 Page 5 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : Feb 3, 2010 Testing commenced on : Feb 4, 2010 Testing concluded on : Feb 26, 2010 2.2. Equipment Under Test Power Supply Power supply voltage : 120V / 60 Hz 115V / 60Hz 12 V DC 24 V DC Other (specified in blank below) DC 5V from host 2.3. Short description of the Equipment under Test Product Name : Wireless Module Model Number : ZF01-B Operation Frequency : 433.05 MHz Modulation Technology : GFSK Transmitter Type : Periodic Transmitter Sample Type : Module Note: The module be used in series host. About more details, refer to the test photos and user’s manual. 2.4. EUT operation mode The EUT has been tested under typical operating mode(TX mode). V1.0 Page 6 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd 2.5. Configuration of Tested System MODULE STAND ALONE CONFIGURATION Equipment Used in Tested System No. Equipment Manufacturer Model No. Serial No. 1 Notebook AUSU I9100L 59NP009727 2 Printer HP Laserjet 1000 series / …

Text truncated - open the document above for the full version.

V1.0 Page 32 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd Test Setup Photos of the EUT AC conducted emission test photos (Module stand alone configuration) (Module with a representative host) EUT V1.0 Page 33 of 35 Report No.: WE10020004 FCC ID: TWNZF01-B Shenzhen Huatongwei International Inspection Co., Ltd Radiated emission test photos (Module stand alone configuration) (Module with a representative host) EUT EUT