TWSAP-500Outdoor AP

AP-500 Wireless Outdoor AP Page 1 of 47 MIMO 802.11n/a + 802.11n/b/g 300Mbps WiFi High Power Outdoor Access Point/Bridge User Guide Revision 1.3 AP-500 Wireless Outdoor AP Page 2 of 47 Revision History Version Date Notes 1.2a Feb. 20, 2012 Initial generic version for 802.11n BR & AP ODU 1.2b Mar.06, 2012 Updated AP setting info 1.3 Nov.08, 2012 Update FCC Statement AP-500 Wireless Outdoor AP Page 3 of 47 Introduction The WLAN ODU MIMO 2x2 WiFi Outdoor System consists of two concurrent running radios, one at 5GHz support 802.11a/n standard, and the other at 2.4GHz for 802.11b/g/n features. The MIMO 2x2 802.11n/a 300Mbps Wireless High Power Outdoor Bridge support Point-to-Point, Point to Multipoint, building-to-building communication, that the data rate is up to 150Mbps in HT-20 mode, or to 300 Mbps in HT-40 mode. The bridge function is most suitable for enterprises, campus or off-site locations that require LAN or Internet access without the availability of wired networks to extend network coverage up to 35Km.; and the 802.11 b/g/n radio is mainly for Access Point application to provide local wireless access to the Internet. The WLAN ODU MIMO 2x2 WiFi Outdoor System offers different encryption mechanisms including WEP, and WPA to ensure the communication security. For APs / Bridges connections, the MAC address authentication mechanism is provided. The WLAN ODU MIMO 2x2 WiFi Outdoor System is designed for the outdoor environment and it is full weather proof against the most stringent condition. For further protection, the bridge and Power over Ethernet adapter are all with the built-in lightning protectors. To meet the stringent outdoor application, the WLAN ODU incorporates the patent technology to ensure the operation of the radio over the wide temperature. The build-in lightning protectors further ensure the radio and its accessories’ safety during the operation. Power over Ethernet design, mounting accessory and field installation kits ensure easy to use experience. The WLAN ODU is in a weatherproof enclosure for mounting outdoors and includes its own brackets for attaching to a wall, pole, radio mast, or tower structure. The unit powered through its Ethernet cable connection from a power injector module that installed indoors. The wireless bridge system offers a fast, reliable, and cost-effective solution for connectivity between remote Ethernet wired LANs or to provide Internet access to an isolated site. The system is also easy to install and operate, ideal for situations where a wired link may be difficult or expensive to deploy. In addition, the WLAN ODU offer full network management capabilities through an easy-to-use web interface, a command-line interface, and support for Simple Network Management Protocol (SNMP) tools. AP-500 Wireless Outdoor AP Page 4 of 47 Key Features:
2x2 MIMO for both 2.4GHz and 5GHz radios
Fast Ethernet or 300Mbps 802.11n/a wireless backhaul and 300Mbps 802.11n/b/g AP coverage area
Full Weather Proof outdoor design IP-67 rated carrier
Wide Temp Range: -40 o C to +60 o C
Light weight with built-In Lightning Protection AP-500 Wireless Outdoor AP Page 5 of 47 Table of Contents 1. The WLAN ODU Hardware Feature ......................................................................................................... 9 1.1 Hardware Outline........................................................................................................................ 9 1.2 Product Feature......................................................................................................................... 10 1.2.1 Feature Highlight .........................................................................................................11 1.3 Product and Accessories ............................................................................................................ 12 1.4 Interface................................................................................................................................... 12 1.4.1 External Antenna Connection...................................................................................... 12 1.4.2 Power over Ethernet (PoE) Cable Connector ................................................................. 13 1.4.3 Grounding Screw ........................................................................................................ 13 1.4.4 Ethernet Cable Connection.......................................................................................... 14 1.5 Product Warranty...................................................................................................................... 14 1.6 Warranty Limitation ................................................................................................................... 14 1.7 System Requirement ................................................................................................................. 15 1.8 Feature Summary...................................................................................................................... 15 2. Getting Started..................................................................................................................................... 16 2.1 Setup Local Area Connection on Your PC ................................................................................... 16 2.1.1 Start Network Configuration on your PC..................................................................... 16 2.2 Check Access to WLAN ODU Product........................................................................................ 19 2.3 Access to Web Pages................................................................................................................. 20 2.4 Basic Configuration ................................................................................................................... 21 2.4.1 System Setting...................................................................................…

Text truncated - open the document above for the full version.

Report No： 127415R-RFUSP42V01 Page: 281 of 289 Attachement EUT Photograph (1) EUT Photo (2) EUT Photo Report No： 127415R-RFUSP42V01 Page: 282 of 289 (3) EUT Photo

FCC ID.: TWSAP-500 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Outdoor AP Model No.: AP-500 F F C C C C I I D D : : TWSAP-500 S/N: Made in Taiwan Trade name: HANDLINK Model number.: AP-500

FCC ID.: TWSAP-500 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Outdoor AP Model No.: AP-500 F F C C C C I I D D : : TWSAP-500 S/N: Made in Taiwan Trade name: HANDLINK Model number.: AP-500

Report No： 127415R-RFUSP42V01 Page: 283 of 289 (4) EUT Photo (5) EUT Photo Report No： 127415R-RFUSP42V01 Page: 284 of 289 (6) EUT Photo (7) EUT Photo Report No： 127415R-RFUSP42V01 Page: 285 of 289 (8) EUT Photo (9) EUT Photo Report No： 127415R-RFUSP42V01 Page: 286 of 289 (10) EUT Photo Report No： 127415R-RFUSP42V01 Page: 287 of 289 (11) EUT Photo (2.4G_MB) Report No： 127415R-RFUSP42V01 Page: 288 of 289 (12) EUT Photo (5G_MB) Report No： 127415R-RFUSP42V01 Page: 289 of 289 (13) EUT Photo (2.4G_ Antenna) (14) EUT Photo (5G_ Antenna)

Report No. 127415R-RF-US-Exp Page: 1 of 7 RF Exposure Evaluation declaration Product Name ：Outdoor AP Model No. ：AP-500 FCC ID. ：TWSAP-500 Applicant : Handlink Technologies Inc Address : 4F, No. 3, Prosperity Rd. 1, Scienced-Based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Date of Receipt : 2012/07/23 Date of Declaration : 2012/10/12 Report No. : 127415R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No. 127415R-RF-US-Exp Page: 2 of 7 Laboratory Information We, QuieTek Corporation, are an independent RF consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025 specified testing scopes: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site:http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory: No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory: No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Taiwan R.O.C. : TAF, Accreditation Number: 1313 NCC, Certificate No : NCC-RCB-07 USA : FCC, Registration Number: 365520 Canada : IC, Submission No: 150981 Report No. 127415R-RF-US-Exp Page: 3 of 7 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 127415R-RF-US-Exp Page: 4 of 7 1.3. Test Result of RF Exposure Evaluation Product Outdoor AP Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3dBi or 2.00 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11b WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 50 cm (mW/cm 2 ) 1 2412 339.63 0.0216 6 2437 359.75 0.0229 11 2462 133.35 0.0085 IEEE 802.11g WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 50 cm (mW/cm 2 ) 1 2412 155.24 0.0099 6 2437 173.38 0.0110 11 2462 37.84 0.0024 The power density Pd (4th column) at a distance of 50 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 . Report No. 127415R-RF-US-Exp Page: 5 of 7 Product Outdoor AP Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3dBi or 2.00 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11n (20MHz) ANT 0+1 WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 50 cm (mW/cm 2 ) 1 2412 76.21 0.0049 6 2437 111.94 0.0071 11 2462 103.75 0.0066 IEEE 802.11n (40MHz) ANT 0+1 WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 50 cm (mW/cm 2 ) 3 2422 49.66 0.0032 6 2437 53.21 0.0034 9 2452 29.72 0.0019 The power density Pd (4th column) at a distance of 50 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 . Report No. 127415R-RF-US-Exp Page: 6 of 7 Product Outdoor AP Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 16dBi or 39.81 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11a WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 50 cm (mW/cm 2 ) 149 5745 544.50 0.6900 157 5785 543.25 0.6884 165 5825 530.88 0.6727 The power density Pd (4th column) at a distance of 50 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 . Report No. 127415R-RF-US-Exp Page: 7 of 7 Product Outdoor AP Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 16dBi or 39.81 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11 n(20MHz) ANT 0+1 WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 50 cm (mW/cm 2 ) 149 5745 594.29 0.7531 157 5785 511.68 0.6484 165 5825 5…

Text truncated - open the document above for the full version.

Report No： 127415R-RFUSP42V01 Page: 1 of 289 Test Report Product Name：Outdoor AP Model No. ：AP-500 FCC ID. ：TWSAP-500 Applicant ： Handlink Technologies Inc Address ： 4F, No. 3, Prosperity Rd. 1, Scienced-Based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Date of Receipt：2012/07/23 Issued Date ：2012/10/19 Report No. ：127415R-RFUSP42V01 Report Version ：V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 127415R-RFUSP42V01 Page: 2 of 289 Test Report Certification Issued Date : 2012/10/19 Report No. : 127415R-RFUSP42V01 Product Name ： Outdoor AP Applicant ： Handlink Technologies Inc Address ： 4F, No. 3, Prosperity Rd. 1, Scienced-Based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Manufacturer ： Transystem Inc. Model No. ： AP-500 FCC ID. ： TWSAP-500 EUT Test Voltage : AC 100~240V, 47-63Hz Trade Name ： HANDLINK Applicable Standard ： FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2011 ANSI C63.4: 2009 Test Result ： Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By : ( Carol Tsai / Engineering Adm. Specialist) Tested By : ( Ben Huang / Assistant Engineer) Approved By : ( Roy Wang / Manager ) Report No： 127415R-RFUSP42V01 Page: 3 of 289 Laboratory Information We, QuieTek Corporation, are an independent RF consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025 specified testing scopes: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site:http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory: No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory: No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Taiwan R.O.C. : TAF, Accreditation Number: 1313 NCC, Certificate No : NCC-RCB-07 USA : FCC, Registration Number: 365520 Canada : IC, Submission No: 150981 Report No： 127415R-RFUSP42V01 Page: 4 of 289 TABLE OF CONTENTS Description Page 1. General Information.............................................................................................................. 6 1.1. EUT Description ............................................................................................................. 6 1.2. Operational Description ................................................................................................ 11 1.3. Test Mode ..................................................................................................................... 12 1.4. Tested System Details .................................................................................................. 13 1.5. Configuration of tested System .................................................................................... 13 1.6. EUT Exercise Software ................................................................................................ 14 1.7. Test Facility...................................................................................................................15 2. Conducted Emission .......................................................................................................... 16 2.1. Test Equipment............................................................................................................. 16 2.2. Test Setup .................................................................................................................... 16 2.3. Limits ............................................................................................................................ 17 2.4. Test Procedure ............................................................................................................. 17 2.5. Test Specification.......................................................................................................... 17 2.6. Uncertainty ................................................................................................................... 17 2.7. Test Result....................................................................................................................18 2.8. Test Photo .................................................................................................................... 22 3. Peak Power Output ............................................................................................................ 23 3.1. Test Equipment............................................................................................................. 23 3.2. Test Setup .................................................................................................................... 23 3.3. Test procedures ............................................................................................................ 23 3.4. Limits ............................................................................................................................ 23 3.5. Test Specification.......................................................................................................... 23 3.6. Uncertainty ................................................................................................................... 23 3.7. Test Result................................................…

Text truncated - open the document above for the full version.

Report No： 127415R-RFUSP42V01 Page: 144 of 289 5. RF antenna conducted test 5.1. Test Equipment The following test equipments are used during the test: RF antenna conducted test / SR7 Instrument ManufacturerModel No. Serial No Next Cal. Date Spectrum Analyzer R&S FSP 100561 2013/02/19 Note: 1. All equipments that need to calibrate are with calibration period of 1 year. 5.2. Test Setup RF Antenna Conducted Measurement: Report No： 127415R-RFUSP42V01 Page: 145 of 289 5.3. Limits In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on an RF conducted or radiated measurement. Attenuation below the general limits specified in Section 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a) (see Section 15.205(c)). 5.4. Test Procedure The EUT was setup according to ANSI C63.4: 2009 and tested according to DTS test procedure of Jan. 2012 KDB558074 for compliance to FCC 47CFR 15.247 requirements Set RBW = 100 kHz, Set VBW> RBW, scan up through 10th harmonic. 5.5. Test Specification According to FCC Part 15 Subpart C Paragraph 15.247: 2011 5.6. Uncertainty Conducted is defined as ± 1.27dB Report No： 127415R-RFUSP42V01 Page: 146 of 289 5.7. Test Result Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 IEEE 802.11b, Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 1 2412 42.333 ≥20 Pass 11 2462 60.585 ≥20 Pass Channel 01 (2412MHz) Report No： 127415R-RFUSP42V01 Page: 147 of 289 Channel 11 (2462MHz) Report No： 127415R-RFUSP42V01 Page: 148 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 IEEE 802.11g, Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 1 2412 29.410 ≥20 Pass 11 2462 47.328 ≥20 Pass Channel 01 (2412MHz) Report No： 127415R-RFUSP42V01 Page: 149 of 289 Channel 11 (2462MHz) Report No： 127415R-RFUSP42V01 Page: 150 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 IEEE 802.11n (20MHz), (ANT 0) Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 1 2412 29.339 ≥20 Pass 11 2462 46.841 ≥20 Pass Channel 1 (2412MHz) Report No： 127415R-RFUSP42V01 Page: 151 of 289 Channel 11 (2462MHz) Report No： 127415R-RFUSP42V01 Page: 152 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 IEEE 802.11n (20MHz), (ANT 1) Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 1 2412 31.127 ≥20 Pass 11 2462 47.068 ≥20 Pass Channel 1 (2412MHz) Report No： 127415R-RFUSP42V01 Page: 153 of 289 Channel 11 (2462MHz) Report No： 127415R-RFUSP42V01 Page: 154 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 IEEE 802.11n (40MHz), (ANT 0) Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 3 2422 28.688 ≥20 Pass 9 2452 39.040 ≥20 Pass Channel 3 (2422MHz) Report No： 127415R-RFUSP42V01 Page: 155 of 289 Channel 9 (2452MHz) Report No： 127415R-RFUSP42V01 Page: 156 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 IEEE 802.11n (40MHz), (ANT 1) Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 3 2422 29.068 ≥20 Pass 9 2452 40.054 ≥20 Pass Channel 3 (2422MHz) Report No： 127415R-RFUSP42V01 Page: 157 of 289 Channel 9 (2452MHz) Report No： 127415R-RFUSP42V01 Page: 158 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/08/23 Test Site SR7 2412MHz (30MHz-25GHz)-802.11b 2462MHz (30MHz-25GHz) -802.11b Report No： 127415R-RFUSP42V01 Page: 159 of 289 2412MHz (30MHz-25GHz)-802.11g 2462MHz (30MHz-25GHz) -802.11g Report No： 127415R-RFUSP42V01 Page: 160 of 289 2412MHz (30MHz-25GHz)-802.11n(20MHz)-ANT 0 2462MHz (30MHz-25GHz) -802.11n(20MHz)-ANT 0 Report No： 127415R-RFUSP42V01 Page: 161 of 289 2412MHz (30MHz-25GHz)-802.11n(20MHz)-ANT 1 2462MHz (30MHz-25GHz) -802.11n(20MHz)-ANT 1 Report No： 127415R-RFUSP42V01 Page: 162 of 289 2422MHz (30MHz-25GHz)-802.11n(40MHz)-ANT 0 2452MHz (30MHz-25GHz) -802.11n(40MHz)-ANT 0 Report No： 127415R-RFUSP42V01 Page: 163 of 289 2422MHz (30MHz-25GHz)-802.11n(40MHz)-ANT 1 2452MHz (30MHz-25GHz) -802.11n(40MHz)-ANT 1 Report No： 127415R-RFUSP42V01 Page: 164 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/10/06 Test Site SR7 IEEE 802.11a, Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 149 5745 37.89 ≥20 Pass 165 5825 46.98 ≥20 Pass Channel 149 (5745MHz) Report No： 127415R-RFUSP42V01 Page: 165 of 289 Channel 165 (5825MHz) Report No： 127415R-RFUSP42V01 Page: 166 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/10/06 Test Site SR7 IEEE 802.11n (20MHz), (ANT 0) Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 149 5745 45.71 ≧20 Pass 165 5825 51.04 20≧ Pass Channel 149 (5745MHz) Report No： 127415R-RFUSP42V01 Page: 167 of 289 Channel 165 (5825MHz) Report No： 127415R-RFUSP42V01 Page: 168 of 289 Product Outdoor AP Test Item RF antenna conducted test Test Mode Mode 1: Transmit Date of Test 2012/10/06 Test Site SR7 IEEE 802.11n (20MHz), (ANT 1) Duty Cycle: 1 Channel No. Frequency (MHz) Measure Level (dBc) Limit (dBc) Result 149 5745 39.25 ≧20 Pass 165 5825 48.92 20≧ Pass Chan…

Text truncated - open the document above for the full version.

Report No： 127415R-RFUSP42V01 Page: 213 of 289 7. Occupied Bandwidth 7.1. Test Equipment The following test equipments are used during the test: Occupied Bandwidth / SR7 Instrument Manufacturer Model No. Serial No Next Cal. Date Spectrum Analyzer R&S FSP 100561 2013/02/19 Note: 1. All equipments that need to calibrate are with calibration period of 1 year. 7.2. Test Setup 7.3. Test Procedures The EUT was setup according to ANSI C63.4: 2009; tested according to DTS test procedure of Jan. 2012 KDB558074 for compliance to FCC 47CFR 15.247 requirements. Set RBW = 1% of EBW, Span greater than RBW. 7.4. Limits The 6 dB bandwidth must be greater than 500 kHz. 7.5. Test Specification According to FCC Part 15 Subpart C Paragraph 15.247: 2011 7.6. Uncertainty The measurement uncertainty is defined as ±150Hz Report No： 127415R-RFUSP42V01 Page: 214 of 289 7.7. Test Result Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/08/22 Test Site SR7 802.11 b Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 1 2412 12.624 ≧0.5 Pass 6 2437 13.026 ≧0.5 Pass 11 2462 12.204 0.5≧ Pass Channel 1 Report No： 127415R-RFUSP42V01 Page: 215 of 289 Channel 6 Report No： 127415R-RFUSP42V01 Page: 216 of 289 Channel 11 Report No： 127415R-RFUSP42V01 Page: 217 of 289 Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/08/22 Test Site SR7 IEEE 802.11g Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 1 2412 16.621 ≧0.5 Pass 6 2437 16.647 0.5≧ Pass 11 2462 16.601 0.5≧ Pass Channel 1 Report No： 127415R-RFUSP42V01 Page: 218 of 289 Channel 6 Report No： 127415R-RFUSP42V01 Page: 219 of 289 Channel 11 Report No： 127415R-RFUSP42V01 Page: 220 of 289 Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/08/22 Test Site SR7 IEEE 802.11n (20MHz)(ANT 0) Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 1 2412 17.927 ≧0.5 Pass 6 2437 17.816 ≧0.5 Pass 11 2462 17.873 0.5≧ Pass Channel 1 Report No： 127415R-RFUSP42V01 Page: 221 of 289 Channel 6 Report No： 127415R-RFUSP42V01 Page: 222 of 289 Channel 11 Report No： 127415R-RFUSP42V01 Page: 223 of 289 Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/08/22 Test Site SR7 IEEE 802.11n (20MHz)(ANT 1) Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 1 2412 17.775 ≧0.5 Pass 6 2437 17.815 ≧0.5 Pass 11 2462 17.783 0.5≧ Pass Channel 1 Report No： 127415R-RFUSP42V01 Page: 224 of 289 Channel 6 Report No： 127415R-RFUSP42V01 Page: 225 of 289 Channel 11 Report No： 127415R-RFUSP42V01 Page: 226 of 289 Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/08/22 Test Site SR7 IEEE 802.11n (40MHz)(ANT 0) Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 3 2422 36.545 ≧0.5 Pass 6 2437 36.556 ≧0.5 Pass 9 2452 36.549 0.5≧ Pass Channel 3 Report No： 127415R-RFUSP42V01 Page: 227 of 289 Channel 6 Report No： 127415R-RFUSP42V01 Page: 228 of 289 Channel 9 Report No： 127415R-RFUSP42V01 Page: 229 of 289 Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/08/22 Test Site SR7 IEEE 802.11n (40MHz)(ANT 1) Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 3 2422 36.567 ≧0.5 Pass 6 2437 36.440 ≧0.5 Pass 9 2452 36.442 0≧.5 Pass Channel 3 Report No： 127415R-RFUSP42V01 Page: 230 of 289 Channel 6 Report No： 127415R-RFUSP42V01 Page: 231 of 289 Channel 9 Report No： 127415R-RFUSP42V01 Page: 232 of 289 Product Outdoor AP Test Item Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2012/10/05 Test Site SR7 802.11 a Channel No. Frequency (MHz) Measurement Level (MHz) Required Limit (MHz) Result 149 5745 16.70 0.5≧ Pass 157 5785 16.70 ≧0.5 Pass 165 5825 16.70 ≧0.5 Pass Channel 149 Ref 20.5 dBmAtt 30 dB A * Offset 0.5 dB LVL Center 5.745 GHzSpan 50 MHz5 MHz/ * * RBW 300 kHz VBW 1 MHz SWT 100 ms * 1 PK VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 1 Marker 1 [T1 ] 4.09 dBm 5.736600000 GHz 2 Marker 2 [T1 ] 10.86 dBm 5.737400000 GHz 3 Delta 3 [T1 ] 0.47 dB 16.700000000 MHz D1 4.86 dBm Comment: A:\2 Date: 5.OCT.2012 15:16:51 Report No： 127415R-RFUSP42V01 Page: 233 of 289 Channel 157 Ref 20.5 dBmAtt 30 dB A * Offset 0.5 dB LVL Center 5.785 GHzSpan 50 MHz5 MHz/ * * RBW 300 kHz VBW 1 MHz SWT 100 ms * 1 PK VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 1 Marker 1 [T1 ] 4.35 dBm 5.776600000 GHz 2 Marker 2 [T1 ] 11.04 dBm 5.787500000 GHz 3 Delta 3 [T1 ] 0.08 dB 16.700000000 MHz D1 5.04 dBm Comment: A:\2 Date: 5.OCT.2012 15:24:46 Report No： 127415R-RFUSP42V01 Page: 234 of 289 Channel 165 Ref 20.5 dBmAtt 30 dB A * Offset 0.5 dB LVL Center 5.825 GHzSpan 50 M…

Text truncated - open the document above for the full version.