TX2-RTL8735BDM11n RTL8735BDM combo module

RTL8735BDM User Guide 1 RTL8735BDM User Guide Rev. 4 2024 RTL8735BDM User Guide 2 COPYRIGHT ©2023 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp. DISCLAIMER Realtek provides this document ‘as is’, without warranty of any kind. Realtek may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors. TRADEMARKS Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are trademarks/registered trademarks of their respective owners. ESD Protection AMB82-MINI Development Board is electrostatic sensitive device, ESD protection measures should be taken when carrying. RTL8735BDM User Guide 3 1. Product Overview AMB82-MINI is a development board designed for RTL8735BDM module. RTL8735BDM is a dual-frequency Wi-Fi + Bluetooth SoC module based on RTL8735BDM chip. RTL8735BDM (also named AmebaPro-II) is a highly integrated low power 802.11 a/b/g/n Wireless LAN (WLAN) and Bluetooth camera SoC. It combines ARM v8M MCUs (500MHz and 2.23 DMIPS/MHz), WLAN MAC, a 1T1R capable WLAN baseband, Bluetooth MAC, RF, audio codec, ISP and H264/H265 encoder in a single chip. It provides useful high speed connectivity interfaces, such as USB 2.0 host, SD host interfaces. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different application and control usage. RTL8735BDM User Guide 4 1.1. Characteristic MCU Features  Real-M500 (TM9) clock frequency up to 500MHz  I-Cache 32KB/D-Cache 32KB  eXecute In Place (XIP) on NOR flash  Internal Memory  Supports 768KB ROM  Supports 512KB RAM  Supports external flash interface  Supports MCM embedded 64MB/128MB DDR2 Memory RTL8735BDM User Guide 5 ISP Features  Advanced temporal and spatial noise reduction(3DNR)  Support major brands of DOL-HDR or Staggered-HDR sensors  Support MIPI CSI-2 data lane  Support Auto Banding, Auto Exposure, Auto White Balance  Black level compensation and dead pixel cancellation  Lens shading compensation  Advanced contrast adjustment and sharpness enhancement  Programmable color matrix and gamma table  Digital WDR  Image enhancement(brightness, contrast, saturation, hue and sharpness)  ISP tuning tool Graphic Processing  Digital resolution scaling down  Multiple stream outputs and various formats: NV12, RGB888  Each stream has individual OSD overlay  Support motion detection and private mask Video Encoding  Max 5-megapixel resolution for H.264/H.265 encoding  H.264 Baseline/Main/High profiles, levels 4.1  H.265 Main and Main Still profiles, levels 4  JPEG/MJPEG Baseline and Max 5-megapixel resolution for JPEG encoding  Multiple streams real-time H.265/H.264/JPEG encoding  H265 2M@30fps + H265 1M@30fps  CBR/VBR rate control Audio  Built-in Audio Codec  1 way Audio analog output for earphone  1 way Audio analog input on board WIFI Features  802.11 a/b/g/n compatible 1x1, 2.4GHz/5GHz  802.11e QoS Enhancement (WMM)  Wi-Fi WEP, WPA, WPA2, WPA3, WPS. Open, shared key, and pair-wise key authentication RTL8735BDM User Guide 6 services  Supports low power Tx/Rx for short-range application  Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)  Low latency immediate High-Throughput Block Acknowledgement (HT-BA) Bluetooth Features  Bluetooth Low Energy (BLE) 5.1  Supports LE secure connections  Supports LE scatternet  Supports 1 Master/1 Slave  Crypto engine: MD5, SHA-1, SHA2-224, SHA2-256, HMAC, AES  ECDSA, ED25519  RSA SD Card Features  Support SD version 3.0  Support card capacity up to 2TB  Support 3.3V and 1.8V operating voltage Peripheral Interfaces  Support UART、I2C、SPI interface for external device  Support PWM interface with configurable duration and duty cycle from 0 ~ 100%  Support ADC channel with 12-bit mode  Maximum 59 programmable GPIOs RTL8735BDM User Guide 7 2. Main Parameters Model AMB82-MINI Suitable modules RTL8735BDM Package DIP-30(2.54 spacing standard row pin) Size 60*37.4mm WIFI Antenna External 4th IPEX antenna Spectrum Range 2400-2483.5MHz or 5180-5825MHz WIFI Supports 802.11 a/b/g/n Bluetooth BLE 5.1 Operation temperature -20°C ~ 85°C , from main chip point of view Storage environment -40°C ~ 105°C , < 90%RH Power supply Supply voltage 5V current greater than 1000mA Interfaces UART/GPIO/ADC/PWM/IIC/SPI/ MIPI Audio Built-in Analog Microphone Video MS-SA816988B01-R Image Sensor Module SD Card Support SD version 3.0 USB One is RTL8735BDM USB 2.0 host, the other is debug log Flash SPI NOR Flash 16MB 2.1. Power supply selection You can choose one of the following methods to supply power for AMB82-MINI:  Micro USB interface power adapter, recommend the rated current ≧ 1A  External 5V power supply on V_USB and GND pin. 2.2. Electrical characteristics Parameter Symbol Min Typ. Max Units 5V Supply voltage V_USB 4.75 5 5.25 V Digital I/O voltage - 3.135 3.3 3.465 V Input-High Voltage VIH 2.0 - - Input-Low Voltage VIL - - 0.8 V RTL8735BDM User Guide 8 3. Appearance size Back Side Front Side, Board Size RTL8735BDM User Guide 9 4. Led indicator and button description There are three LED indicators and two buttons on AMB82-MINI, as shown in following figure: Led indicator and button LED status or button function Remarks Power LED 5V power indicator When 5V power is supplied, the LED is on. LED1 Blue LED by user defined Controlled by PF9 LED2 Green LED by user defined Controlled by PE6 Reset Button Reset system / Load code Button Set system to load code mode Press Button into load code mode. RTL8735BDM User Guide 10 5. Assembly There are two accessories for AMB82-MINI, one is IPEX RF antenna and the other is image sensor module. 5.1. How to assemble IPEX RF ante…

Text truncated - open the document above for the full version.

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 ; Fax: 886-3-5776598 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: December 7, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Realtek Semiconductor Corp. (“the applicant”) certifies that the equipment FCC ID: TX2-RTL8735BDM for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Realtek Semiconductor Corp. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Name: Dana Liaw Title: Project Manager E-mail: [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 ; Fax: 886-3-5776598 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: December 7, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Realtek Semiconductor Corp. (“the applicant”) certifies that the equipment FCC ID: TX2-RTL8735BDM for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Realtek Semiconductor Corp. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Name: Dana Liaw Title: Project Manager E-mail: [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 ; Fax: 886-3-5776598 Date: December 7, 2023 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: TX2-RTL8735BDM To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Block Diagram  Schematic Diagram  Operational Description  Parts List  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s). The short-term confidential release date is addressed in the application form.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Dana Liaw [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 ; Fax: 886-3-5776598 Date: December 18, 2023 Request for Modular Approval for FCC ID: TX2-RTL8735BDM Item Requirements EUT 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module is equipped with its own shielding case. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module has buffer modulation / data inputs. 3. The module must contain power supply regulation on the module The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The module has an external antenna with connector. The antenna gain for 2.4GHz is 3.5dBi; for 5GHz is 5.0 dBi. 5. The module must demonstrate compliance in a stand-alone configuration The module was tested on evaluation board, and it’s not inside of another device during testing 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The module must comply with RF exposure requirements The module complies with the FCC RF exposure requirements for fixed and mobile applications. RF exposure is addressed in the RF exposure exhibit. ______________________ Dana Liaw [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 ; Fax: 886-3-5776598 Date: December 15, 2023 To whom it may concern, Please be notified that I, Dana Liaw, have designated in Sporton International Inc. as the agent being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Sporton International Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: TX2-RTL8735BDM If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Sincerely yours, Dana Liaw [email protected]

PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 1 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 1. Photograph of the EUT 11n RTL8735BDM combo module (Brand Name: REALTEK / Model Name: RTL8735BDM) PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 2 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 3 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 4 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 5 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 6 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01

REALTEK RTL8735BDM MAC: XXXXXXXXXXXX SN: xxxxxxxxxxxx FCC ID: TX2-RTL8735BDM IC: 6317A-RTL8735BDM NCC: CCXXnnYYyyyZzW CMIIT ID: XXXXXXXXXX QR code 20mm 28mm FCC/CE/NCC label sample

PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 7 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 2. Internal Photograph of the EUT 11n RTL8735BDM combo module (Brand Name: REALTEK / Model Name: RTL8735BDM) PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 8 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 9 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 10 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 3. Photograph of the Fixture Fixture (Brand Name: REALTEK / Model Name: AmebaPRO2 adapter) PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 11 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 12 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 4. Photograph of the Antenna PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 13 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 WLAN & Bluetooth Antenna (Brand Name: LYNwave / Model Name: ALA110-222050-300011) PHOTOGRAPHS OF EUT Report No.: EP371824 TEL : 886-3-327-3456 Page Number : 14 of 14 FAX : 886-3-328-4978 Issue Date : Dec. 06, 2023 Report Version : 01 ─────THE END────

TEL : 886-3-327-3456 Page : 1 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 RF EXPOSURE EVALUATION REPORT FCC ID : TX2-RTL8735BDM Equipment : 11n RTL8735BDM combo module Brand Name : REALTEK Model Name : RTL8735BDM Applicant : Realtek Semiconductor Corp. No. 2,Innovation Road II, Hsinchu Science Park, Hsinchu 300,Taiwan Manufacturer : Realtek Semiconductor Corp. No. 2,Innovation Road II, Hsinchu Science Park, Hsinchu 300,Taiwan Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 4.1. Standalone Power Density Calculation ............................................................................................. 8 4.2. Collocated Power Density Calculation ............................................................................................... 8 TEL : 886-3-327-3456 Page : 3 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 History of this test report Report No. Version Description Issued Date FA371824 Rev. 01 Initial issue of report Dec. 13, 2023 TEL : 886-3-327-3456 Page : 4 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type 11n RTL8735BDM combo module Brand Name REALTEK Model Name RTL8735BDM FCC ID TX2-RTL8735BDM Wireless Technology and Frequency Range WLAN 2.4 GHz Band: 2400 MHz ~ 2483.5 MHz WLAN 5.2 GHz Band: 5150 MHz ~ 5250 MHz WLAN 5.3 GHz Band: 5250 MHz ~ 5350 MHz WLAN 5.6 GHz Band: 5470 MHz ~ 5725 MHz WLAN 5.8 GHz Band: 5725 MHz ~ 5850 MHz Bluetooth: 2400 MHz ~ 2483.5 MHz Mode WLAN: 802.11a/b/g/n HT20 Bluetooth LE HW Version SM35B02_2V2 SW Version v38_4b9e0eb2_lab_v1 EUT Stage Identical Prototype Reviewed by: Jason Wang Report Producer: Daisy Peng Ant. Port Brand Model Name Antenna Type Connector Gain (dBi) WLAN 2.4GHz WLAN 5GHz Bluetooth 1 1 1 1 LYNwave ALA110-222050-300011 PIFA IPEX MHF4 Note 1 2 1 1 1 RTANT K212-10068-A PIFA IPEX MHF4 Note 1 Ant. Port WLAN 2.4GHz WLAN 5GHz Bluetooth WLAN 2.4GHz WLAN 5GHz Bluetooth 1 1 1 1 3.50 5.00 3.50 2 1 1 1 2.77 0.84 2.77 Note 2: There are two antenna models provided by different manufacturers. All tests were conducted using the high-gain antenna. TEL : 886-3-327-3456 Page : 5 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 2. Maximum RF average output power among production units 2.4GHz WLAN Mode Channel Frequency (MHz) Ant 1 Tune-up Limit 802.11b 1Mbps 1 2412 18.50 6 2437 18.50 11 2462 18.50 802.11g 6Mbps 1 2412 17.50 6 2437 17.50 11 2462 17.50 802.11n-HT20 MCS0 1 2412 17.00 6 2437 17.50 11 2462 16.00 5.2GHz WLAN Mode Channel Frequency (MHz) Ant 1 Tune-up Limit 802.11a 6Mbps 36 5180 18.50 44 5220 18.50 48 5240 18.50 802.11n-HT20 MCS0 36 5180 18.50 44 5220 18.50 48 5240 18.50 5.3GHz WLAN Mode Channel Frequency (MHz) Ant 1 Tune-up Limit 802.11a 6Mbps 52 5260 18.50 60 5300 18.50 64 5320 18.50 802.11n-HT20 MCS0 52 5260 18.50 60 5300 18.50 64 5320 18.50 5.5GHz WLAN Mode Channel Frequency (MHz) Ant 1 Tune-up Limit 802.11a 6Mbps 100 5500 18.50 116 5580 18.50 140 5700 17.00 144 5720 18.50 802.11n-HT20 MCS0 100 5500 18.50 116 5580 18.50 140 5700 17.00 144 5720 18.50 TEL : 886-3-327-3456 Page : 6 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 5.8GHz WLAN Mode Channel Frequency (MHz) Ant 1 Tune-up Limit 802.11a 6Mbps 149 5745 18.50 157 5785 16.50 165 5825 16.00 802.11n-HT20 MCS0 149 5745 18.50 157 5785 16.50 165 5825 16.00 Bluetooth Mode Channel Frequency (MHz) Tune-Up Limit LE 1Mbps 0 2402 12.50 19 2440 12.50 39 2480 12.50 LE 2Mbps 0 2402 12.50 19 2440 12.50 39 2480 12.50 TEL : 886-3-327-3456 Page : 7 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA371824 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 8 of 8 FAX : 886-3-328-4978 Issued Date : Dec. 13, 2023 Form version: 200414 …

Text truncated - open the document above for the full version.

Wireless Connected World ALA110-222050-300011 802.11 a/b/g/n AP/Router embedded antenna Specification Frequency (MHz) 2400 -2500 4900 - 5825 Peak Gain (dBi) 3.5 5.0 VSWR 2.0 : 1 2.0 : 1 Power (Watts) 1 1 Impedance (Ohms) 50 50 Dimension (mm) 55 x 18 x 0.3 Weight (g) 3 Connector IPEX MHF4 Cable length (mm) 300 http://www.lynwave.com Tel: +886 2 35018700 Mail : [email protected] 1 Features •Dual band IEEE 802.11 a/b/g/n standard •On-board mount or case mounting •High efficiency •Quick integration Mechanical Dimensions 2450 MHz 5470 MHz Gain Pattern Wireless Connected World ALA110-222050 802.11 a/b/g/n AP/Router embedded antenna http://www.lynwave.com Tel: +886 2 35018700 Mail : [email protected] 2D Pattern 2. 4GHz X-Z planeY-Z planeX-Y plane 2.45GHz X-Z planeY-Z planeX-Y plane Gain Table Wireless Connected World ALA110-222050 802.11 a/b/g/n AP/Router embedded antenna http://www.lynwave.com Tel: +886 2 35018700 Mail : [email protected] 2D Pattern 2.5GHz X-Z planeY-Z planeX-Y plane 5.15 GHz X-Z planeY-Z planeX-Y plane Wireless Connected World ALA110-222050 802.11 a/b/g/n AP/Router embedded antenna http://www.lynwave.com Tel: +886 2 35018700 Mail : [email protected] 2D Pattern 5.47GHz X-Z planeY-Z planeX-Y plane 5.85 GHz X-Z planeY-Z planeX-Y plane

Product Number: K212-10068-A Product Name: 内置PCB天线 Version：X0 2022/11/221 / 7 SPECIFICATION FORAPPROVAL CUSTOMER(客户名称) 湖南欧智通科技有限公司 CS P/N(客户机种) 4A30X9X2G4-00 PART NAME(品名) 内置PCB板天线（RT-PCB162 V0.0）PIFA天线2.4G/5.8Gφ0.81 黑色L=80MM带四IPEX ROHS FREQUENCY(频率) 2.4-2.5GHz&5.15-5.85GHz RTANT NO.(物料编号) K212-10068-A DATE(日期) 2022.11.22 出样签章 APPROVED BY 核准 CHECKED BY 确认 DRAWED BY 制作 黄龙保宋逸锋刘云海 Remark(备注)： 客户承认签章 APPROVED BY 核准 CHECKED BY 确认 TESTED BY 检测 Sign(客户确认签字盖章)： 东莞市安 特 通信有限公司 RT ^ NT 电 话 ： 0769 - 85833836 传 真 ： 0769 - 8 2 58 2 573 H tt p : // www . r ta n t . co m 地址 ： 东 莞 市 厚 街 镇 沙 塘 工 业 区 沙 隆路 德 朗 实 业 创 新 园 E 栋 Building E, Industrial Innovation Park, Shallong road, Shatang industrial zone, Houjie Town, Dongguan City ProductNumber:K212-10068-A ProductName:内置PCB天线 Version：X0 2022/11/222/7 1.Contents项目表 No.content内容Pages页数 0承认书封面1 1项目表2 2变更履历2 3产品实物图3 4规格表3 5电性测试报告4-6 6样品检验报告7 附件2D产品图附件 2.Revisionhistory变更履历 Revision版本Date日期Changethecontent变更内容 X022.11.22新版 ProductNumber:K212-10068-A ProductName:内置PCB天线 Version：X0 2022/11/223/7 3.产品实物图片Productpicture 4.规格表Specification A.ElectricalProperties FrequencyRang频段范围2.4-2.5GHz&5.15-5.85GHz Impedance特性阻抗50ΩNominal VSWR电压驻波比2.0Max.（带机壳） Gain(peak)增益（峰值）2.77dBi Efficiency效率40% Outofroundness不圆度3.0dBi（Max.） Radiation辐射方式Omni-Directional/全向 Polarization极化方式LinearVertical/垂直 B.PhysicalProperties ConnectorType连接方式四代IPEX Cable线材Φ0.81mm AntennaRadiator天线振子体FPC C.Environmental StorageTemp存储环境范围-40°C~+80°C OperatingTemp工作环境-10°C~+65°C Storagehumidity存储湿度95％ Workinghumidity工作湿度5%～95% ProductNumber:K212-10068-A ProductName:内置PCB天线 Version：X0 2022/11/224/7 5.电性测试报告ElectricalTestReport 5.1Testequipment ProductNumber:K212-10068-A ProductName:内置PCB天线 Version：X0 2022/11/225/7 5.2网络分析仪测试报告 5.3暗室无源测试数据 ProductNumber:K212-10068-A ProductName:内置PCB天线 Version：X0 2022/11/226/7 5.33D方向图（天线裸测） 2450MHz 5500MHz ProductNumber:K212-10068-A ProductName:内置PCB天线 Version：X0 2022/11/227/7 6.样品检验报告Sampleinspectionreport日期：2022.12.22 送检数量5PCS合格数量5PCS 检验项目检验标准及说明 检验结果 判定 No.1No.2No.3No.4No.5 外 观 线材 对比无色差、无脏污、 无破损，无刮伤 passpasspasspasspass■OK□NG IPEX 对比无色差、无脏污、 无破损，无刮伤 passpasspasspasspass■OK□NG PCB/FPC 对比无色差、无脏污、 无破损，无刮伤 passpasspasspasspass■OK□NG 焊接 焊接后不能冷焊、假 焊、锡尖、锡珠、漏焊 passpasspasspasspass■OK□NG 浸锡 浸锡后不能有锡尖，凸 锡球，无浸锡、变形 □OK□NG 其他□OK□NG 主 要 尺 寸 180±3mm8080808080■OK□NG 电 气 及 功 能 测 试 Frequency Rang 2.4-2.5GHz 5.15-5.85GHz VSWR＜5.5passpasspasspasspass■OK□NG 机 械 性 能 Cable与IPEX 组装拉力 >1.0kg1.71.71.61.61.7■OK□NG 备 注 最终判定■合格□不合格□条件认可 审核：张超超检验：雷娟兰 D e t a i l B ( F P C ) D e t a i l A ( 四 代 I P E X ) 导 体 须 镀 锡 G F E D C B A 1 23 4 G F E C D B A 56 A 0 A P P R O V E R D A T E S I G N D E S C R I P T I O N 导 体 与 编 织 须 镀 锡 2 2 . 1 1 . 2 9 新 版 发 行 姜 文 祥 ± 0 . 5 ± 1 . 0 . X X . X ± 3 . 0 X . . X X X ± 0 . 1 ± 5 X X . K 2 1 2 - 1 0 0 6 8 - A 东 莞 市 安 特 通 信 有 限 公 司 R T A N T C O M M U N I C A T I O N S C O . , L T D E - m a i l : d r a g o n @ r t a n t . c o m F a x : 0 7 6 9 - 8 2 5 8 2 5 7 3 H t t p : / / w w w . r t a n t . c o m T e l : 0 7 6 9 - 8 5 8 3 3 8 3 6 欧 智 通 4 A 3 0 X 9 X 2 G 4 - 0 0 内 置 P C B 板 天 线 1 2 3 4 65 A B D C E F G 4 32 1 A B C D E F G 侧 唛 ： P E B A G S H R I N K L I N E 姜 文 祥 新 版 发 行 2 2 . 1 1 . 2 9 D E S C R I P T I O N S I G N D A T E A P P R O V E R A 0 T e l : 0 7 6 9 - 8 5 8 3 3 8 3 6 H t t p : / / w w w . r t a n t . c o m F a x : 0 7 6 9 - 8 2 5 8 2 5 7 3 E - m a i l : d r a g o n @ r t a n t . c o m R T A N T C O M M U N I C A T I O N S C O . , L T D 东 莞 市 安 特 通 信 有 限 公 司 K 2 1 2 - 1 0 0 6 8 - A X X . ± 5 ± 0 . 1 . X X X X . ± 3 . 0 . X . X X ± 1 . 0 ± 0 . 5 4 A 3 0 X 9 X 2 G 4 - 0 0 内 置 P C B 板 天 线

TEL : 886-3-327-0868 Page Number : 1 of 24 FAX : 886-3-327-0855 Issue Date : Jan. 10, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR371824A FCC RADIO TEST REPORT FCC ID : TX2-RTL8735BDM Equipment : 11n RTL8735BDM combo module Brand Name : REALTEK Model Name : RTL8735BDM Applicant : Realtek Semiconductor Corp. No. 2,Innovation Road II, Hsinchu Science Park, Hsinchu 300,Taiwan Manufacturer : Realtek Semiconductor Corp. No. 2,Innovation Road II, Hsinchu Science Park, Hsinchu 300,Taiwan Standard : FCC Part 15 Subpart C §15.247 The product was received on Oct. 20, 2023 and testing was performed from Nov. 03, 2023 to Nov. 21, 2023. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 24 FAX : 886-3-327-0855 Issue Date : Jan. 10, 2024 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR371824A Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Antenna Information .......................................................................................................................... 5 1.3 Modification of EUT ........................................................................................................................... 5 1.4 Testing Location ................................................................................................................................ 5 1.5 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System .......................................................…

Text truncated - open the document above for the full version.