TZI-BOP85579XBop Wireless Speaker 2.0

LOCATION OF PARTS AND CONTROLS LITHIUM-ION BATTERY WARNINGS This device contains a non-removable lithium-ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user’s authority to operate this device. 1. Dust Cover 2. Power Switch 3. Micro USB Port 4. Volume Up Button 5. Volume Down Button 6. Play/Pause Button 7. Mic 8. Suction Cup 9. LED indicator 10. Micro USB Charging Cable (not shown) Bop Wireless Speaker 2.0 WIRELESS SPEAKER THAT STICKS FoldFoldFoldFoldFold Merrimack, New Hampshire, USA 03054 800-846-3000 • Brookstone.com FoldFoldFoldFoldFold pair, select “Bop 2.0”. If prompted, use 0000 as a PIN for the pairing code. Once the speaker is selected, the LED Indicator will flash slowly and beeps will sound to confirm pairing complete. 1. Play your audio device as you normally would, 2. Volume may be adjusted on your audio device or by pressing the '+' or '-' buttons. 3. Press and hold the '+' or '-' button will advance to the next track or go back to the previous track. 4. To pause audio, press the '>' button on the Bop Speaker. To resume audio playback press the '>' button again. 5. Slide the Power Switch to OFF. The LED will go out. LISTENING TO YOUR AUDIO DEVICE SPECIFICATIONS Power Supply: 5V, 500mA Total Output: 3W Range: Class 2, up to 33 ft (10 m) Li-ion Rechargeable Battery: 400mAh Speaker: 1.50 inch, 4 Ohm Charging Time: Approx. 2.5 hours Battery Life: Approx. 9.5 hours Compatibility: Bluetooth ® 2.0 or above device with A2DP/AVRCP/HFP/HSP The Bluetooth ® word mark and logos are registered trademarks owned of Bluetooth SIG, Inc. and any use of such marks by Brookstone is under license. CARE AND STORAGE 1. Store the speaker in its compact form in a cool, dry place. BASIC CELLPHONE OPERATION 1. 2. 3. 4. 5. When you have an incoming call, the speaker sounds an incoming call tone. Both the speaker and your cellphone may ring, depending on your cellphone settings. To answer an incoming call, short press Play/Pause Button to answer the call. To reject an incoming call, long press Play/Pause Button to reject the call. To end a call, short press Play/Pause Button once. If, while you are listening to music, your phone rings and you answer the call, the music selection will then continue from where it had stopped. CHARGING THE SPEAKER 1. Connect the USB Cable (included) to the Micro USB Port on the speaker. 2. With the speaker’s Power Switch off, plug the other end of the USB Cable into a USB Port on your computer. 3. The LED Indicator will illuminate red while charging, and the light will go out when the speaker is fully charged. Charges in approximately 2.5 hours for up to 9.5 hours of listening enjoyment. PAIRING YOUR DEVICE 1. Prepare your device to pair using Bluetooth ® , making sure you are within 33 feet of the speaker. Refer to your device’s owners manual for details if necessary. 2. Slide the Power Switch to ON. The LED Indicator light will flash quickly and the speaker will sound beeps to enter auto-pairing mode. .3 The speaker will wait for a connection in pairing mode for 4 minutes. If it does not pair with a device, it goes into sleep mode. To enter pairing mode again, power the speaker off and then on. 4. Once the speaker is in pairing mode and your device is ready to

Neutron Engineering Inc. Project No.: 1310C107 Page 2 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 3 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 4 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 5 of 10

Neutron Engineering Inc. Project No.: 1310C107 Page 6 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 7 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 8 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 9 of 10 Neutron Engineering Inc. Project No.: 1310C107 Page 10 of 10

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: TZI-BOP85579X Project No. : 1310C107 Equipment : Bop Wireless Speaker 2.0 Model : 88579X.where X=0-9(different cabinet colour) Applicant : Arts Electronics Co., Ltd Address : NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. GENERAL CONCULUSION: Table for Filed Antenna: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Printed Antenna N/A 0 Maximum measured transmitter power: Output Power (dBm) Out Power (mW) Limit (mW) 2.93 1.96 10 According to FCC KDB447498, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm The maximum power specification of this device is 2.93dBm (1.96mW), less than10mW at 5mm distance. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 1 of 103 FCC Radio Test Report FCC ID: TZI-BOP85579X This report concerns (check one): Original Grant Class II Change Issued Date : Nov. 11, 2013 Project No. : 1310C107 Equipment : Bop Wireless Speaker 2.0 Model Name : 85579X (“X”=0-9 denote as different color of cabinet); BOP29 Applicant : Arts Electronics Co., Ltd. Address : NO.1 SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Oct. 18, 2013 Date of Test: Oct. 18, 2013~ Nov. 08, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 2 of 103 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 3 of 103 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 19 4.2.1 RADIATED EMISSION LIMITS 19 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 20 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 31 5 . NUMBER OF HOPPING CHANNEL 55 5.1 APPLIED PROCEDURES / LIMIT 55 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 55 5.1.2 TEST PROCEDURE 55 5.1.3 DEVIATION FROM STANDARD 55 5.1.4 TEST SETUP 55 5.1.5 EUT OPERATION CONDITIONS 55 5.1.6 TEST RESULTS 56 6 . AVERAGE TIME OF OCCUPANCY 58 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 4 of 103 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 58 6.1.1 MEASUREMENT INSTRUMENTS LIST 58 6.1.2 TEST PROCEDURE 58 6.1.3 DEVIATION FROM STANDARD 58 6.1.4 TEST SETUP 59 6.1.5 EUT OPERATION CONDITIONS 59 6.1.6 TEST RESULTS 60 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 72 7.1 APPLIED PROCEDURES / LIMIT 72 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 72 7.1.2 TEST PROCEDURE 72 7.1.3 DEVIATION FROM STANDARD 72 7.1.4 TEST SETUP 72 7.1.5 EUT OPERATION CONDITIONS 72 7.1.6 TEST RESULTS 73 8 . BANDWIDTH TEST 77 8.1 APPLIED PROCEDURES / LIMIT 77 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 77 8.1.2 TEST PROCEDURE 77 8.1.3 DEVIATION FROM STANDARD 77 8.1.4 TEST SETUP 77 8.1.5 EUT OPERATION CONDITIONS 77 8.1.6 TEST RESULTS 78 9 . PEAK OUTPUT POWER TEST 82 9.1 APPLIED PROCEDURES / LIMIT 82 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 82 9.1.2 TEST PROCEDURE 82 9.1.3 DEVIATION FROM STANDARD 82 9.1.4 TEST SETUP 82 9.1.5 EUT OPERATION CONDITIONS 82 9.1.6 TEST RESULTS 83 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 87 10.1 APPLIED PROCEDURES / LIMIT 87 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 87 10.1.2 TEST PROCEDURE 87 10.1.3 DEVIATION FROM STANDARD 87 10.1.4 TEST SETUP 87 10.1.5 EUT OPERATION CONDITIONS 87 10.1.6 TEST RESULTS 88 11 . EUT TEST PHOTO 100 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 5 of 103 REPORT ISSUED HISTORY Issued No. Description Issued Date NEI-FCCP-1-1310C107 Original Issue. Nov. 11, 2013 - - - Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 6 of 103 1. CERTIFICATION Equipment : Bop Wireless Speaker 2.0 Brand Name : Brookstone Model Name : 85579X (“X”=0-9 denote as different color of cabinet); BOP29 Applicant : Arts Electronics Co., Ltd. Manufacturer : Arts Electronics Co., Ltd. Address : NO.1 SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA Date of Test : Oct. 18, 2013~ Nov. 08, 2013 Test Item : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineer…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 100 of 103 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 101 of 103 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 102 of 103 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1310C107 Page 103 of 103 Radiated Measurement Photos Above 1000MHz