TZIXRM10Job Site Charger Radio

INSTRUCTION MANUAL Job Site Charger Radio XRM10 ENGLISH: Original instructions IMPORTANT: Read Before Using. 2 ENGLISH SPECIFICATIONS Model:XRM10 AC power adaptorDC 24 V / 5.0 A, inner sleeve positive BatteryUM-3 (AA size) x 2 for back up CXT battery: 10.8 V - 12 V max LXT battery: 14.4 V - 18 V BandFM AM Frequency coverageFM 87.50 - 108 MHz (0.1 MHz/step) AM (MW) 520 - 1,710 kHz (10 kHz/step) Bluetooth ® Bluetooth ® Bluetooth ® QD ID D049499 (The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.) Bluetooth ® version&HUWL¿HG Bluetooth ® SUR¿OHVA2DP / AVRCP Transmission powerPower Class2 Operating Frequency2,402 MHz - 2,480 MHz Maximum radio-frequency power6.32 dBm (Declaration for EU Compliance) Transmission rangeOptimum: Max.10 meters (33 feet) Possible: Max.30 meters (100 feet) (varies according to usage conditions) Supported codecSBC Circuit feature Loudspeaker 3.5 inches 8 ohm x 2 Output Power10.8 V - 12 V max:1.2 W x 2 18 V: 3.5 W x 2 USB outputUSB TYPE A x 2 (5 V / 2.4 A TOTAL) Battery charge outputCXT battery: 10.8 V - 12 V max, 4 A LXT battery: 14.4 V - 18 V, 6 A Input terminal3.5 mm dia. (AUX IN1/AUX IN2) Antenna systemFM: soft bended rod antenna AM: bar antenna Dimension (L x W x H)270 x 185 x 305 mm Ǝ[Ǝ[Ǝ Weight (without battery cartridge)6.4 kg (14.1 lbs) ‡ 'XHWRRXUFRQWLQXLQJSURJUDPRIUHVHDUFKDQGGHYHORSPHQWWKHVSHFL¿FDWLRQVKHUHLQDUHVXEMHFWWRFKDQJH without notice. ‡ 6SHFL¿FDWLRQVPD\GLIIHUIURPFRXQWU\WRFRXQWU\ The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Makita is under license. Other trademarks and trade names are those of their respective owners. The following table indicates the operating time on a single charge in Radio mode. Battery capacityBattery Cartridge VoltageOperating time (hour) (at speaker output = 50 mW + 50 mW) Charging time (hour) 10.8 V - 12 V max18 VIn radio or AUX In Bluetooth® with USB charging 1.5 AhBL1016-********* -BL1815N********* 2.0 AhBL1021B-********* -BL1820B********* 3.0 Ah-BL1830B********* 14.4 V - 18 V D049499 ® Operating Frequency2,402 MHz - 2,480 MHz , 4 A 3 ENGLISH Battery capacityBattery Cartridge VoltageOperating time (hour) (at speaker output = 50 mW + 50 mW) Charging time (hour) 10.8 V - 12 V max18 VIn radio or AUX In Bluetooth® with USB charging 4.0 AhBL1041B-********* -BL1840B********* 5.0 Ah-BL1850B********* 6.0 Ah-BL1860B********* WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause LQMXU\DQGRU¿UH NOTE: Some of the battery cartridges listed above may not be available depending on your region of residence. NOTE: Table regarding to the battery operating time above is for reference. The actual operating time may differ with the type of the battery, charging condition, or usage environment. Symbols The followings show the symbols used for tool. volts direct current SAFETY WARNINGS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. WARNING: When using electric tools, basic safety precautions should always be followed to UHGXFHWKHULVNRI¿UHHOHFWULFVKRFNDQGSHU- sonal injury, including the following: 1. Read this instruction manual carefully before use. If you use a Makita charger, also read the charger instruction manual. 2. Clean only with dry cloth. Do not use water for cleaning. 3. Do not install near any heat sources such as radiators, heat registers, stoves, or other appa- UDWXV LQFOXGLQJDPSOL¿HUV WKDWSURGXFHKHDW 4. 2QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFL¿HG by the manufacturer. 5. Unplug this appliance during lightning storms or when unused for long periods of time. 6. The battery pack must be recharged only with WKLVUDGLRRUWKHVSHFL¿HGFKDUJHUIRUWKHEDW- tery. A charger that may be suitable for one W\SHRIEDWWHU\PD\FUHDWHDULVNRI¿UHZKHQ used with another battery. 7. Use battery operated radio only with specif- ically designated battery packs. Use of any RWKHUEDWWHULHVPD\FUHDWHDULVNRI¿UH 8. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery ter- minals together may cause sparks, burns, or a ¿UH 9. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrig- erators. There is an increased risk of electric shock if your body is grounded. 10. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If FRQWDFWDFFLGHQWDOO\RFFXUVÀXVKZLWKZDWHU If liquid contacts eyes,additionally seek med- ical help. Liquid ejected from the battery may cause irritation or burns. 11. Do not use a battery pack and radio that is GDPDJHGRUPRGL¿HGDoing so may exhibit XQSUHGLFWDEOHEHKDYLRXUUHVXOWLQJLQ¿UHH[SORVLRQ RUULVNRILQMXU\ 12. 'RQRWH[SRVHDEDWWHU\SDFNRUWRROWR¿UH or excessive temperature.([SRVXUHWR¿UHRU temperature above 130 °C(266°F) may cause explosion. 13. Follow all charging instructions and do not charge the battery pack or tool outside the WHPSHUDWXUHUDQJHVSHFL¿HGLQWKHLQVWUXF- tions. Charging improperly or at temperatures RXWVLGHWKHVSHFL¿HGUDQJHPD\GDPDJHWKH EDWWHU\DQGLQFUHDVHWKHULVNRI¿UH 14. The MAINS plug is used as the disconnect device. The MAINS plug shall remain readily operable. 15. Do not use the product at a high volume for any extended period. To avoid hearing damage, use the product at moderate volume level. 16. LCD displays include liquid which may cause irritation and poisoning. If the liquid enters the eyes, mouth or skin, rinse it with water and call a doctor. 17. Do not expose the product to rain or wet con- ditions. Water entering the product will increase the risk of electric shock. 18. This product is not intended for use by per- sons (including children) with reduced phys- ical, sensory or mental capabilities, or l…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 External Photos for SZEM1912021099CR FCC ID: TZIXRM10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7

24-03-2020 KaiYe Yang XRM10 MAKITA / 191204 /NAMERATING LABEL /MATERIAL+/Coated paper + dumb film /SIZE45X35mm /COLOUR/Black label with white text 1 2 3 4 5 6 DATE: MODEL: ISSUE:01 CUSTOMER NO.: ISSUE BY:CHECKED BY:APPROVED BY: P/N:77-31MR30000000 Made in China Makita Corporation Anjo, Aichi, Japan MK XRM10 FM:87.5-108.0MHz IP64 USA 10.8-18V :14.4-18V :10.8-12V(max) AM:520-1710KHz USB output 5V 2.4A DC IN 24V 5.0A CONFORMS TO UL STD.62368-1 CERTIFIED TO CSA STD.C22.2 No.62368-1 0000120.03 FCC ID: TZIXRM10 Made in China Makita Corporation Anjo, Aichi, Japan MK DMR300 FM:87.5-108.0MHz IP64CAN ICES-3(B)/NMB-3(B) :14.4-18V :10.8-12V(max) AM:520-1710KHz DC IN 24V 5.0A 10.8-18V CONFORMS TO UL STD.62368-1 CERTIFIED TO CSA STD.C22.2 No.62368-1 0000119.11 IC: 7234A-DMR300

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 11 Internal Photos for SZEM1912021099CR FCC ID:TZIXRM10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 11 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 10 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 11 of 11

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109903 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM1912021099CR Applicant: Arts Electronics Co., Ltd Address of Applicant: NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, China Manufacturer: Makita Corporation Address of Manufacturer: 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan Factory: 1. Arts Electronics Co., Ltd. 2. Tenpao Electronics (Huizhou) Co., LTD. Address of Factory: 1. NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA 2. Dongjiang Industrial Estate, Shuikou Street, Huizhou City, Guangdong province China Equipment Under Test (EUT): EUT Name: Job Site Charger Radio Model No.: MR300, DMR300, XRM10 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Makita FCC ID: TZIXRM10 Standards: 47 CFR Part 1.1307, 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2019-12-11 Date of Test: 2019-12-13 to 2020-01-09 Date of Issue: 2020-01-13 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109903 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-01-13 Original Authorized for issue by: Harry Wu /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109903 Page: 3 of 6 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION ...................................................................................................................................... 5 4.3 TEST FACILITY ........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 5 5 SAR EVALUATION ...................................................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 6 5.1.1 Standard Requirement ..................................................................................................................... 6 5.1.2 Limits ................................................................................................................................................ 6 5.1.3 EUT RF Exposure ............................................................................................................................ 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109903 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power Supply: Li-ion Battery: Model: 1. BL1016, DC10.8V, 1.5Ah 2. BL1021B, DC10.8V, 2.0Ah 3. BL1041B, DC10.8V, 4.0Ah 4. BL1815N, DC18V, 1.5Ah 5. BL1820B, DC18V, 2.0Ah 6. BL1830B, DC18V, 3.0Ah 7. BL1840B, DC18V, 4.0Ah 8. BL1850B, DC18V, 5.0Ah 9. BL1860B, DC18V, 6.0Ah AC/DC Adapter: Input: AC100-240V, 50/60Hz Output: DC24V, 5A Cable: AC Cable: 120cm, Unshielded, DC Cable: 180cm, Unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, π/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: PCB Antenna Antenna Gain: 0dBi Remark: All batteries were pretested, and only the worst case (Model: BL1815N) for final test Remark: Model No.: MR300, DMR300, XRM10 Only the model MR300 was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, only different on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109903 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Mea…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109902 Page: 1 of 96 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM1912021099CR Applicant: Arts Electronics Co., Ltd Address of Applicant: NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, China Manufacturer: Makita Corporation Address of Manufacturer: 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan Factory: 1. Arts Electronics Co., Ltd. 2. Tenpao Electronics (Huizhou) Co., LTD. Address of Factory: 1. NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA 2. Dongjiang Industrial Estate, Shuikou Street, Huizhou City, Guangdong province China Equipment Under Test (EUT): EUT Name: Job Site Charger Radio Model No.: MR300, DMR300, XRM10 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Makita FCC ID: TZIXRM10 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2019-12-11 Date of Test: 2019-12-13 to 2020-01-09 Date of Issue: 2020-01-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109902 Page: 2 of 96 Revision Record Version Chapter Date Modifier Remark 01 2020-01-13 Original Authorized for issue by: Harry Wu /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109902 Page: 3 of 96 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Remark: Model No.: MR300, DMR300, XRM10 Only the model MR300 was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, only different on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202109902 Page: 4 of 96 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 13 6.1 ANTENNA REQUIREMENT .................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Con…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM1912021099CR FCC ID:TZIXRM10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup 1.2 Radiated Emissions which fall in the restricted bands Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.3 Radiated Spurious Emissions Test Setup