TZI-BT054Smart Bulb

Daylight 5700K Daylight 5700K BT054 PROOF OF PURCHASE Brightness lumens 450 Estimated Energy Cost $0.79 per year 40 Replacement 6.5 LED = With you can... Limited Warranty - Star Technologies warrants that this bulb will be free from defects in material and workmanship and will operate for 25,000 hours. This bulb has a three year Warranty from time of purchase. If it fails or you are not satisfied with its performance, Star will send you a replacement bulb. Please call our toll free number 1-844-STAR-LED, or send a copy of your original purchase receipt, proof of purchase decal from box and the bulb to our customer care center. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.incidental or consequential damage is expressly excluded. Garantía Limitada - Star Technologies garantiza que esta bombilla estará libre de defectos de material y mano de obra y que funcionará por 25.000 horas. Esta bombilla tiene una garantía de tres años desde el momento de la compra. Si falla o si no está conforme con su funcionamiento, Star le enviará una bombilla de reemplazo. Comuníquese con nuestra línea gratuita 1-844-STAR-LED, o envíe una copia de su ticket de compra original, la etiqueta autoadhesiva del comprobante de compra de la caja y la bombilla a nuestro centro de atención al cliente. Este reemplazo es el único recurso disponible y la responsabilidad por daños incidentales o emergentes está expresamente excluida. !Caution! - DO NOT USE WITH DIMMERS or DIMMING FIXTURES . • Use only on 120v, 60Hz. • When installing or changing, make sure that the power to the fixture is off. • Suitable for damp locations – the bulb is suitable for use in wet locations when in an outdoor rated fixture • This product is NOT intended for use in emergency light fixtures or exit signs. ¡Precaución! - NO USAR CON ATENUADORES DE LUZ. • Usar solo con 120v, 60Hz. • Para la instalación o el cambio, asegúrese de que la alimentación del accesorio esté desactivada. • La bombilla es apta para su uso en lugares húmedos cuando se encuentra en un accesorio con capacidad nominal para exteriores. • Este producto NO está diseñado para su uso en accesorios de iluminación de emergencia o señales de salida. Free AppNo Extra Fees 3 1 Select the light fi xture you would like to control and install the bulb. Download the Smart Bulb from the App Store. Open the app and fi nd the bulbs. Easy Installation Quick App Set-Up Simple Operation 2 Lighting Facts Per Bulb BrightnessEstimated Yearly Energy Cost $0.79 Based on 3 hrs/day, 11¢/kWhCost depends on rates and use Light Appearance Based on hrs/day Energy Used Cool 5700K 6.5 Watts 22.8 years Life Warm 5700K DAYLIGHT 450 lumens Lasts up to 22.8 YEARS + Lighting Control 6.5 w LED replacement 83 % energy savings 83 % energy savings Light Dashboard Search & Setup • To setup, stand within 4ft of the bulb with the power on• Press Find to sync all bulbs in your network (repeat when adding bulbs)• Press Check button • Name each bulb Operates like standard LED bulb when not being controlled by app. • See all bulbs in your network• Turn all on or off**• Operate individual bulbs both on and off and dimming level • Control one or multiple ** lights at the same time • Dim one or multiple ** lights at the same time • Control bulbs up to 100ft away• Turn on/off with app or standard switch• Control up to 10 light bulbs individually or in groups ** . ** Apple Devices Only Group Controls** • Select bulbs you want to control together and name group • Turn on and off multiple bulbs• Dim multiple bulbs to the same level **Apple Devices Only This package is produced from recycled materials. We plant 5 times more trees a year than we use in the package production. During the production or disposal the inks and glues that were used to produce this packages do not have any toxic effects o n our environment. Using LED light bulbs saves energy, produces less trash and annually saves you time & effort replacing light bulbs. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance cou ld void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entr e l’antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur. 1. Open the App Store or Google Play2. Search for Smart Bulb3. Install the Free App4. Open and enjoy! How to install the Free App Star Technologies LLCBowling Green, KY 42101STARtechllc.comMade in China

External Photos

450 Lumens Model: BT053 7W 3000K 120V~ 60Hz E468607 BT053 BT054 FCC ID: TZI-BT054 IC:7234A-BT054 CAUTION NOT FOR USE WITH DIMMERS NOT FOR EMERGENCY LIGHTING NOT FOR USE IN TOTALY ENCLOSED LUMINAIRES SUITABLE FOR DAMP LOCATIONS YYMM 450 Lumens Model: BT054 7W 5700K 120V~ 60Hz E468607 FCC ID: TZI-BT054 IC:7234A-BT054 CAUTION NOT FOR USE WITH DIMMERS NOT FOR EMERGENCY LIGHTING NOT FOR USE IN TOTALY ENCLOSED LUMINAIRES SUITABLE FOR DAMP LOCATIONS YYMM

Internal Photos

SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1406003080RF Page: 1 of 2 FCC ID: TZI-BT054 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. RF Exposure Compliance Requirement 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- F/1500 30 1500-100000 -- -- 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1406003080RF Page: 2 of 2 FCC ID: TZI-BT054 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2. MPE Calculation Method E (V/m)=(30*P*G) 0.5 /d Power Density: Pd(W/m 2 )=E 2 /377 E=Electric Field (V/m) P=Peak RF output Power (W) G=EUT Antenna numeric gain (numeric) d= Separation distance between radiator and human body (m) The formula can be changed to Pd= (30*P*G)/(377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 3. Calculated Result and Limit Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402 1.585 3.70 2.344 0.00074 1 Complies 2442 1.585 3.85 2.427 0.00077 1 Complies 2480 1.585 3.68 2.333 0.00074 1 Complies

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM140600308001 Page: 1 of 57 FCC ID: TZI-BT054 Authorized Signature: Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1406003080RF Applicant: Arts Electronics Co., Ltd. FCC ID: TZI-BT054 Product Name: Smart Bulb Product Description: Bluetooth bulb with 2.4 GHz as carrier. Model No.: BT054, BT053 ♣ ♣ Please refer to section 3 of this report for further details. Standards: CFR 47 FCC PART 15 Subpart C: 2013 section 15.247 Date of Receipt: 2013-12-12 Date of Test: 2013-12-12 to 2014-06-25 Date of Issue: 2014-09-01 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140600308001 Page: 2 of 57 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-09-01 Original Authorized for issue by: Tested By 2013-12-12 to 2014-06-25 (Jack Liang) /Project Engineer Date Prepared By 2014-06-25 (Jack Liang) /Clerk Date Checked By 2014-09-01 (Fred Zhu)/Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140600308001 Page: 3 of 57 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary TEST TEST REQUIREMENT TEST METHOD RESULT Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PASS 6 dB Bandwidth FCC PART 15 C section 15.247 (a)(2) ANSI C63.10: Clause 6.9.1 PASS Maximum Peak Output Power FCC PA…

Text truncated - open the document above for the full version.

Test Setup Photos 1.1 CON DU CTED EM ISSI ON TEST SETUP 1.2 RADI ATE D SP URI OU S EM ISSIO N TE ST SETUP 30MHz to 1G: Above 1G: