TZI-PU83848XMobile Mini BT Speaker

801162 _ INS _ Mobile Mini Speaker Instructions Doc. Size: 250mm W x 115mm H Folded Size: 50mmW x 115mmH Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordian Fold: 4 folds Fold Fold Fold Fold BATTERY PRECAUTION Please dispose of this unit in the same manner as you would an exhausted battery. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user’s authority to operate this device. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada Statement: This device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause CHARGING THE SPEAKER 1. Connect the USB Cable (included) to the micro USB Port on the speaker. 2. With the speaker’s On/Off Switch off, plug the other end of the USB Cable into a USB Port on your computer. 3. The LED Indicator will illuminate red while charging, and the light will go out when the speaker is fully charged. Charges in approximately 2.5 hours for up to 11 hours of listening enjoyment. LISTENING TO YOUR AUDIO DEVICE (AUX MODE) 1. Connect 3.5mm audio cable to Aux-in jack of the speaker. Plug the other end of the cable into an MP3, CD player or other audio device directly. 2. Slide the On/Off Switch on the side of the speaker to on. The LED Indicator light will illuminate blue. 3. Play your audio device as you normally would, and adjust the volume on your audio device and with the Volume Rocker Button on the speaker to enjoy your music at the desired volume. Mobile Mini BT Speaker FOR TABLETS, LAPTOPS OR SMARTPHONES 1 2345 6 7 4. For more bass, simply twist the Bass-Boost Cap on the top of the speaker counter-clockwise to pop the bass-boost up! 5. To close the Bass-Boost Cap, push it down and twist clockwise until it sits securely on the base of the speaker. 6. To disconnect the speaker from the audio source, remove the 3.5mm audio cable from your audio device. 7. Slide the On/Off Switch on the side of the speaker to off. The LED Indicator light will go out. PAIRING TO YOUR DEVICE 1. Prepare your device to pair using Bluetooth, making sure you are within 33 feet of Mobile Mini BT Speaker. Refer to your device’s owner’s manual for details if necessary. 2. Slide the On/Off Switch on the speaker to on. The LED indicator light will illuminate blue. 3. Press and hold the Pairing button until the LED indicator light starts flashing. 4. The Mobile Mini BT Speaker is in pairing mode when the LED LOCATION OF PARTS AND CONTROLS 1. Bass-Boost Cap 2. Micro USB Port 3. AUX-In Port 4. Pairing Button 5. Volume Rocker Button 6. On/Off Switch 7. LED Indicator 8. Micro USB cable (not shown) 9. 3.5mm audio cable (not shown) undesired operation. Cet appareil est conforme à la norme RSS-210 de la règlementation d'Industrie Canada ; son utilisation est soumise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada Fold Fold Fold FoldFoldFold 838481 838482 838438 Merrimack, New Hampshire, USA 03054 800-846-3000 • Brookstone.com ONE (1) YEAR LIMITED WARRANTY Brookstone ® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1302C042 Page 1 of 11 ATTACHMENT PHOTOGRAPHS OF EUT Neutron Engineering Inc. Project No.: 1302C042 Page 2 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 3 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 4 of 11

Neutron Engineering Inc. Project No.: 1302C042 Page 5 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 6 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 7 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 8 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 9 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 10 of 11 Neutron Engineering Inc. Project No.: 1302C042 Page 11 of 11

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 1 of 109 FCC Radio Test Report FCC ID: TZI-PU83848X This report concerns (check one) : Original Grant Class II Change Issued Date : Mar. 06, 2013 Project No. : 1302C042 Equipment : Mobile Mini BT Speaker Model Name 83848x, where X=0 - 9 (different cabinet color); PU139 Applicant : Arts Electronics Co., Ltd. Address : NO. 1 SHANGXING LU, SHANGJIAO COMMUNITY,CHANGAN TOWN, DONGGUAN CITY,GUANGDONG PROVINCE, CHINA Manufacturer : Arts Electronics Co., Ltd. Address : NO. 1 SHANGXING LU, SHANGJIAO COMMUNITY,CHANGAN TOWN, DONGGUAN CITY,GUANGDONG PROVINCE, CHINA Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Feb. 20, 2013 Date of Test: Feb. 20, 2013 ~ Mar. 05, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 2 of 109 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 3 of 109 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 37 5 . NUMBER OF HOPPING CHANNEL 61 5.1 APPLIED PROCEDURES / LIMIT 61 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 61 5.1.2 TEST PROCEDURE 61 5.1.3 DEVIATION FROM STANDARD 61 5.1.4 TEST SETUP 61 5.1.5 EUT OPERATION CONDITIONS 61 5.1.6 TEST RESULTS 62 6 . AVERAGE TIME OF OCCUPANCY 64 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 4 of 109 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 64 6.1.1 MEASUREMENT INSTRUMENTS LIST 64 6.1.2 TEST PROCEDURE 64 6.1.3 DEVIATION FROM STANDARD 64 6.1.4 TEST SETUP 65 6.1.5 EUT OPERATION CONDITIONS 65 6.1.6 TEST RESULTS 66 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 78 7.1 APPLIED PROCEDURES / LIMIT 78 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 78 7.1.2 TEST PROCEDURE 78 7.1.3 DEVIATION FROM STANDARD 78 7.1.4 TEST SETUP 78 7.1.5 EUT OPERATION CONDITIONS 78 7.1.6 TEST RESULTS 79 8 . BANDWIDTH TEST 83 8.1 APPLIED PROCEDURES / LIMIT 83 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 83 8.1.2 TEST PROCEDURE 83 8.1.3 DEVIATION FROM STANDARD 83 8.1.4 TEST SETUP 83 8.1.5 EUT OPERATION CONDITIONS 83 8.1.6 TEST RESULTS 84 9 . PEAK OUTPUT POWER TEST 88 9.1 APPLIED PROCEDURES / LIMIT 88 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 88 9.1.2 TEST PROCEDURE 88 9.1.3 DEVIATION FROM STANDARD 88 9.1.4 TEST SETUP 88 9.1.5 EUT OPERATION CONDITIONS 88 9.1.6 TEST RESULTS 89 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 93 10.1 APPLIED PROCEDURES / LIMIT 93 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 93 10.1.2 TEST PROCEDURE 93 10.1.3 DEVIATION FROM STANDARD 93 10.1.4 TEST SETUP 93 10.1.5 EUT OPERATION CONDITIONS 93 10.1.6 TEST RESULTS 94 11 . EUT TEST PHOTO 106 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 5 of 109 1. CERTIFICATION Equipment : Mobile Mini BT Speaker Brand Name : Brookstone Model Name 83848x, where X=0 - 9 (different cabinet color); PU139 Applicant : Arts Electronics Co., Ltd. Factory : Arts Electronics Co., Ltd. Address : NO. 1 SHANGXING LU, SHANGJIAO COMMUNITY,CHANGAN TOWN, DONGGUAN CITY,GUANGDONG PROVINCE, CHINA Date of Test : Feb. 20, 2013 ~ Mar. 05, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, a…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 106 of 109 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 107 of 109 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 108 of 109 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1302C042 Page 109 of 109 Radiated Measurement Photos Above 1000MHz