U2C-APX-2012All Points Printer

AllPoints Keypad Installation Manual 1.0.4 September 17, 2012 AllPoints ™ Printer Installation Manual (Keypad Unit for VeriFone Ruby or Topaz and TDL NCR RealPOS 7402 Models) OUTSITE NETWORKS, INC. 2551 Eltham Ave., Suite N Norfolk, VA 23513 Office: 800-371-1118  Fax: 757-853-3089 AllPoints Keypad Installation Manual Page 2 Upon installation provide this document to the Store Manager Copyright  2012 Outsite Networks, ™ Inc. All rights reserved. Outsite Networks, Inc. created this document. No part of this publication may be reproduced, stored in a retrieval system, modified, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the express, prior written consent of Outsite Networks, Inc. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct interference at their expense. Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules. AllPoints Keypad Installation Manual Page 3 Table of Contents 1. Electrical Connection Specifications .......................................................... 4 2. Power Specifications ................................................................................... 4 3. Provided Materials ...................................................................................... 4 4. Optional Materials per configuration requirements .................................... 4 5. Tools Needed .............................................................................................. 5 6. Site Preparation ........................................................................................... 5 7. AllPoints Keypad Printer ............................................................................ 5 8. Installation Procedures ................................................................................ 6 8.1 VeriFone Ruby/Verifone Topaz DDM Instructions ................................... 6 8.2 TDL NCR RealPOS 7402 Instructions ....................................................... 7 8. Make Network Connections ....................................................................... 7 9. Load AllPoints Keypad paper ..................................................................... 8 10. Powering On the AllPoints Keypad ............................................................ 8 11. Configure the AllPoints Keypad ................................................................. 8 11.1. EZ-Install Application ................................................................................ 8 11.2. Manual configuration .................................................................................. 9 11.2.1. Enter AllPoints Keypad Configuration Mode ............................................. 9 11.2.2. Configure the Unit Mode .......................................................................... 11 11.2.3. Configure the Unit ID number .................................................................. 11 11.2.4. Configure the Unit Group ......................................................................... 12 11.2.5. Configure the Demo Mode ....................................................................... 12 11.2.6. Configure the Num Units .......................................................................... 12 11.2.7. Configure the Internet Connection Settings .............................................. 12 11.2.8. Configure Static IP settings ...................................................................... 13 11.2.9. Configure the Site ID number ................................................................... 14 11.2.10. Configure Servicer Index .......................................................................... 14 11.2.11. Configure the Service IP Address ............................................................. 14 11.2.12. Configure the Volume Level .................................................................... 15 12. Connect the AllPoints Keypad to the Internet .......................................... 15 13. AllPoints Keypad final check-Out ............................................................ 15 Appendix A – Sample Wiring Diagrams .......................................................................... 16 Appendix B – Paper Specifications .................................................................................. 17 Appendix C – Keypad Template....................................................................................... 18 AllPoints Keypad Installation Manual Page 4 1. Electrical Connection Specifications Instructions and Standards 1. Read this guide completely prior to installing the AllPoints Keypad Printer. 2. All Electrical connections must comply with the following:  Equipment must be installed and used in accordance with the National Electrical Code (NEC), and the National Fire Protection Association (NFPA) – Automotive and Marine Service Station Code.  Equipment must be installed in compliance with the instructions set forth in this manual. 3. This manual contains wiring diagrams, drawings, and photographs to assist in the proper installation of the AllPoints Keypad Printer. Any questions regarding this manual or the proper installation of the AllPoints Keypad Printer should be addressed to Outsite Networks, Inc. at 800-371-1118. 2. Power Specifications AC Input 115/230V~…

Text truncated - open the document above for the full version.

96 MHz 44.1 KHz 25 MHz 3.56 MHz 13.56 MHz 12 MHz 115.2 Kbaud 6 MHz

FCCID: U2C-APX-2012This device complies with Part 15 of FCC rules. Operation issubject to the following two c onditions: 1) this device may not cause harmful interference and, 2) this device must accept any interference received, including interference that may cause undesired operation.IC: 6944A-APP Outsite Networks, Inc. Model: APP Canada 310FCC/IC Label (50 x 8 mm)

ALL POINTS PRINTER Operational /Technical Description. The All Points Printer, APP, is located in the check-out lane of retail outlets and interfaces to a Point of Sale register to monitor transactions. Based on transaction content coupons may print, audio is played and LED’s may light up. Consumers may identify themselves by means of a Mifare RFID tag at the end of the transaction. The Mifare reader antenna is located in the front of the top cover. The APP will link transactions with specific consumer ID’s and upload the data over the internet to a host system for processing. As a result the host system will send instructions to the APP to print coupons, display images or play audio (mp3) files. For printing a standard off the shelf Star GT100 printer is integrated into the unit. Main Circuit Functions. Power Supply: 24V input from an external power supply is converted into 1.0V, 1.8 V, 3.3V, 5V and 9V with controlled power up sequence. An early loss of power signal is provided. Processor : AT91SAM9M10 chip running at 400 MHz with 32 kB internal RAM and 18.432 MHz on chip oscillator. External Memory - 2 MB NOR Flash - 2 GB RAM (LPDDR) - 8 GB uSD RF-ID: Build around MFRC530 processor a highly integrated reader IC for contactless communication at 13.56 MHz. The receiver module provides efficient demodulation/decoding circuitry implementation for compatible transponder signals. The digital module manages the complete ISO/IEC 14443A standard framing and error detection (parity and CRC). The internal transmitter module directly drives an antenna designed for a proximity operating distance up to 100 mm without any additional active circuitry. The antenna is implemented by means of copper traces on a separate Flex PCB. Audio Driver: The DAC circuit converts a 16 bit 44.1 kHz input stream to drive a single chip amplifier delivering 1.1 Watt into 8 Ohm speaker. I/O ports:  Serial Ports (3): o Ser 1 and 3: 2 wire serial ports RX / TX o Ser 2: BI directional RS 232 with CTS and RTS  Ethernet (1): 10/100 Mbps  USB (4) o Device port external USB-B o Host port external, USB-A o Host port internal on 5 pin header. This connection is used for the Star GT100 printer.  Card reader Interface for 3 track magnetic stripe cards on internal header Display/Keypad Options:  Keypad with LED  LCD Touchpad with magnetic stripe reader.

Bill-of-Material Outsite Networks Inc - UI Flex Keypad/LED Assembly: Version: R201 Generated: June 25, 201 2 *** This BOM is RoHS compliant *** Items changed from previous revision (R200) *NOTE* Packaging specification fields (e.g. reel, tube, bulk pack ...) have been replaced by '-' in Mfg Part Numbers ITEMQTYRef-DesNEOVENTUS P/NVALUEDESCRIPTIONPACKAGEMANUFACTURER 1MFGR1 PART NUMBERMANUFACTURER 2MFGR2 PART NUMBER 12R4,R51123‐00020RES, 0603, 5%, 1/16W, JUMPER, 0, THICK FILM603 PANASONICERJ‐3GEY0R00ROHMMCR03‐‐‐J000 21R11133‐00010, JUMPERRES, 0805, 5%, 1/8W, JUMPER, 0, THICK FILM805 PANASONICERJ6GEY0R00KOA SPEERCR0805‐J/‐000 32C1,C22109‐000510pFCAP, CERAMIC, NPO, 0603, 10pF, 2%, 100V603 AVX06031A100GATJOHNSON TECHNOLOGIES 251R14S100GV4 42C5,C62109‐000118pFCAP, CERAMIC, NPO, 0603, 18pF, 2%, 100V603 AVX06031A180GATJOHNSON TECHNOLOGIES 251R14S180GV4 55LD1,LD2,LD4,LD5,LD65120‐0011REDLED, SINGLE, RED, SM, PLCC‐2, 3.2mm x 2.8mmSMAvagoHSMZ‐A100 ‐R00J1 61J46101‐0038HORIZ, MALE, 8X1 CONN, SM, 8X1, 0.1IN, HORIZONTAL, MALE, TINSMTSM‐108‐01‐T‐SH 71‐ PCB 82C3,C42109‐000482pFCAP, CERAMIC, NPO, 0603, 82pF, 2%, 100V603 AVX06031A820GATJOHNSON TECHNOLOGIES 251R14S820GV4 Note: 1. The following reference designators are NOT INSERTED 2R2,R31133‐00010, JUMPERRES, 0805, 5%, 1/8W, JUMPER, 0, THICK FILM805 PANASONICERJ6GEY0R00KOA SPEERCR0805‐J/‐000 1J16180‐0006FPC FINGER, 50X1 CONN, SM, AU FINGER, 50 CONTACT, 0.5MM, 3.5 X 0.35 MM, FPC, INVSM‐‐ 4FID1,FID2,FID3,FID49997‐0001FID 1.05mm FIDUCIAL, SM, 1.05mm PAD, 1.8mm MASKSM 4MT1,MT2,MT5,MT69999‐00014.0mm/6.5mm MOUNT HOLE, PLATED, 4.0mm HOLE / 6.5mm PADTH 1MT49999‐00125.1mm/7.0mm MOUNT HOLE, PLATED, 5.1mm HOLE / 7.0mm PADTH 1MT39999‐00145.10MMX9.89MM MOUNT HOLE, SLOT, PLATED, 5.10mmX9.89mmTH

Bill-of-Material Outsite Networks, Inc. - WPS03 Assembly: CPU Version: R200 Generated: April 30, 2012 *** This BOM is RoHS compliant *** Items changed from previous revision (R---) *NOTE* Packaging specification fields (e.g. reel, tube, bulk pack ...) have been replaced by '-' in Mfg Part Numbers ITEMQTYRef-DesNEOVENTUS P/NVALUEDESCRIPTIONPACKAGEMANUFACTURER 1MFGR1 PART NUMBERMANUFACTURER 2MFGR2 PART NUMBER 19R8,R9,R37,R39,R40,R110,R116,R117,R1181122‐000310.0KRES, 0603, 1%, 1/10W, 10.0K, THICK FILM603PANASONICERJ‐3EKF1002 24R53,R54,R59,R1621122‐000971.5KRES, 0603, 1%, 1/10W, 71.5K, THICK FILM603PANASONICERJ‐3EKF7152 326 R28,R29,R35,R55,R63,R67,R68,R76,R81,R84,R85,R 88,R89,R98,R99,R100,R101,R102,R103,R104,R106 ,R130,R145,R149,R150,R1641122‐001015.0KRES, 0603, 1%, 1/10W, 15.0K, THICK FILM603PANASONICERJ‐3EKF1502 41R501122‐002810RES, 0603, 1%, 1/10W,10.0, THICK FILM603PANASONICERJ‐3EKF10R0 527 R15,R16,R34,R36,R51,R60,R64,R69,R108,R111,R1 13,R114,R119,R121,R122,R123,R124,R125,R127,R 128,R152,R153,R154,R155,R156,R157,R1581122‐0029100RES, 0603, 1%, 1/10W, 100.0, THICK FILM603PANASONICERJ‐3EKF1000 63R30,R38,R721122‐00312.49KRES, 0603, 1%, 1/10W, 2.49K, THICK FILM603PANASONICERJ‐3EKF2491 78R22,R32,R48,R107,R112,R159,R166,R1671122‐00341.50KRES, 0603, 1%, 1/10W, 1.50K, THICK FILM603PANASONICERJ‐3EKF1501ROHMMCR03‐‐‐FX1501 88R7,R19,R20,R21,R23,R41,R42,R451122‐003930.1KRES, 0603, 1%, 1/10W, 30.1K, THICK FILM603PANASONICERJ‐3EKF3012 911 R52,R109,R132,R133,R134,R139,R140,R141,R142, R143,R1441122‐00474.75KRES, 0603, 1%, 1/10W, 4.75K, THICK FILM603PANASONICERJ‐3EKF4751 104R46,R47,R49,R1601122‐005149.9RES, 0603, 1%, 1/10W, 49.9, THICK FILM603PANASONICERJ‐3EKF49R9 111R331122‐005712.4KRES, 0603, 1%, 1/10W, 12.4K, THICK FILM603PANASONICERJ‐3EKF1242 123R25,R43,R441122‐00651.00MRES, 0603, 1%, 1/10W, 1.00M, THICK FILM603PANASONICERJ‐3EKF1004 131R971122‐0089820RES, 0603, 1%, 1/10W, 820, THICK FILM603PANASONICERJ‐3EKF8200 141R1051122‐00902.74KRES, 0603, 1%, 1/10W, 2.74K, THICK FILM603PANASONICERJ‐3EKF2741 154R70,R71,R74,R781122‐0095806RES, 0603, 1%, 1/10W, 806, THICK FILM603PANASONICERJ‐3EKF8060 162R77,R1151122‐009742.2KRES, 0603, 1%, 1/10W, 42.2K, THICK FILM603PANASONICERJ‐3EKF4222 171R581122‐00988.06KRES, 0603, 1%, 1/10W, 8.06K, THICK FILM603PANASONICERJ‐3EKF8061 182R56,R1611122‐0100130KRES, 0603, 1%, 1/10W, 130K, THICK FILM603PANASONICERJ‐3EKF1303 193R57,R75,R901122‐010223.7KRES, 0603, 1%, 1/10W, 23.7K, THICK FILM603PANASONICERJ‐3EKF2372 201R311122‐01042.80MRES, 0603, 1%, 1/10W, 2.80M, THICK FILM603VISHAYCRCW06032M80FK 213R73,R79,R941122‐01068.25KRES, 0603, 1%, 1/10W, 8.25K, THICK FILM603PANASONICERJ‐3EKF8251 2224 R1,R2,R3,R4,R5,R6,R61,R62,R65,R66,R80,R82,R83, R86,R87,R91,R92,R120,R131,R135,R136,R137,R14 7,R1481122‐010727RES, 0603, 1%, 1/10W, 27.0, THICK FILM603PANASONICERJ‐3EKF27R0 231R961122‐0121102KRES, 0603, 1%, 1/10W, 102K, THICK FILM603PANASONICERJ‐3EKF1023 241R1261122‐01226.81KRES, 0603, 1%, 1/10W, 6.81K, THICK FILM603STACKPOLE ELECTRONICSRNCP0603F‐D6K81 254R11,R12,R93,R1381133‐00010, JUMPERRES, 0805, 5%, 1/8W, JUMPER, 0, THICK FILM805PANASONICERJ6GEY0R00 266R17,R18,R24,R26,R27,R951152‐000575RES, 1210, 1%, 1/2W, 75.0 OHMS, THICK FILM1210PANASONICERJ‐14NF75R0 274RN1,RN2,RN3,RN41401‐000410RES NTWK, ISO, 16 TERM, 1.60mmx3.8mm, 5%, 1/16W, 101.6X3.8 PANASONICEXB‐2HV100J 282C143,C1452107‐00101000pFCAP, CERAMIC, NPO, 0603, 1000pF, 5%, 50V603MURATAGRM1885C1H102JA01 296C107,C114,C141,C144,C146,C1572107‐0011470pFCAP, CERAMIC, NPO, 0603, 470pF, 5%, 50V603AVX06035A471JAT ‐APANASONICECJ1VC1H471J 305C20,C168,C169,C172,C1732107‐001410PFCAP, CERAMIC, NPO, 0603, 10pF, 5%, 50V603MURATAGCM1885C1H100JA16 317C3,C4,C21,C31,C34,C99,C1022107‐001927pFCAP, CERAMIC, NPO, 0603, 27pF, 5%, 50V603AVX06035A270JAT‐A 3217 C7,C8,C9,C16,C17,C83,C85,C129,C130,C132,C133, C134,C135,C151,C152,C160,C1612107‐002015pFCAP, CERAMIC, NPO, 0603, 15pF, 5%, 50V603AVX06035A150JAT‐A 332C5,C62107‐002356PFCAP, CERAMIC, NPO, 0603, 56pF, 5%, 50V603AVX06035A560JAT‐ATDKC1608C0G1H560J 342C12,C132107‐002468pFCAP, CERAMIC, NPO, 0603, 68pF, 5%, 50V603AVX06035A680JAT‐ATDKC1608C0G1H680J 3510 C22,C23,C49,C50,C51,C57,C142,C147,C170,C1712137‐00010.01uFCAP, CERAMIC, X7R, 0603, 0.01uF, 10%, 25V603PanasonicECJ‐1VB1E103K 3674 C24,C25,C26,C27,C28,C33,C35,C38,C39,C40,C41,C 43,C45,C46,C47,C52,C53,C54,C55,C56,C58,C59,C6 1,C62,C63,C64,C65,C66,C67,C69,C70,C71,C72,C73, C74,C75,C76,C77,C78,C79,C80,C81,C82,C89,C90,C 91,C94,C95,C96,C97,C98,C100,C103,C104,C108,C1 09,C111,C113,C117,C118,C119,C120,C121,C125,C 126,C127,C128,C131,C138,C148,C149,C163,C164, C1662137‐00020.1uFCAP, CERAMIC, X7R, 0603, 0.1uF, 10%, 25V603MURATAGRM188R71E104KA01 373C153,C155,C1562140‐00190.47uFCAP, CERAMIC, X7R, 0805, 0.47uF, 10%, 50V805MURATAGRM21BR71H474KA88 383C154,C158,C1752146‐000310uFCAP, CERAMIC, X7R, 1210, 10uF, 10%, 35V1210MURATAGRM32ER7YA106KA12 3920 C18,C19,C30,C36,C37,C42,C44,C60,C68,C92,C101, C110,C112,C115,C122,C123,C124,C139,C140,C1672170‐000310uFCAP, CERAMIC, X5R, 0805, 10uF, 10%, 10V805MURATAGRM21BR61A106KE19 406C14,C15,C32,C106,C116,C1772170‐00071.0uFCAP, CERAMIC, X5R, 0805, 1.0uF, 10%, 50V805AVX08055D105KAT‐A 413C165,C174,C1762177‐000322uFCAP, CERAMIC, X5R, 1210, 22uF, 20%, 25V1210TAIYO YUDENTMK325BJ226MM 422C1,C22196‐00011000PFCAP, Ceramic C0G, 1812, 1000pF, 20%, 2KV1812NOVACAP1812N102M202N 435C48,C136,C137,C150,C1622203‐0006150uFCAP, TANTALUM, 7343, 150uF, 20%, 10V, 0.700 ESR7343KEMETT491D157M010AT 441C1592210‐0007470uFCAP, ALUMINUM ELECTROLYTIC, 470uF, 20%, 35VSMPANASONICEEV‐FK1V471Q 457FB2,FB4,FB5,FB16,FB17,FB18,FB193102‐00050.5A BEADFERRITE BEAD, 0603, 0.5A, 120 OHM603PANASONICEXC‐3BP121 461FB153102‐00072A BEADFERRITE BEAD, 0603, 2A, 120 OHM603NIC COMPONENTSNCB‐H0603R121‐‐200F 4712 FB1,FB3,FB6,FB7,FB8,FB9,FB10,FB11,FB12,FB13,FB 14,FB203103‐00034.0A BEADFERRITE BEAD, 0805,4.0A, 39 OHM805PANASONICEXC‐ ML20A390 481L103210‐002910uHINDUCTOR, 10uH, 3.0A, SM, RoHSSM‐SHIELDED VISHAYIHLP2525CZ‐‐100M01 492L11,L123210‐00304.7uHINDUCTOR, 4.7uH, 5.5A, SM, RoHSSM‐SHIELDED VISHAYIHLP2525CZ‐‐4R7M01 502…

Text truncated - open the document above for the full version.

RFID Antenna Specifications The antenna is implemented by means of copper traces on the Flex LED PCB. Type: Inductive Resonant frequency: 13.56MHz Bandwidth: 600kHz RFID Loop Antenna

User Interface - Flex Keypad Version www.outsitenetworks.com 1 2 NEOVENTUS DES. GRP. 2551 Eltham Avenue, Suite N Norfolk, VA 23513 Outsite Networks 2.0 NOTES Rev. Date Description Revision History 4 5 6 3 2 1 REV SCALE SHEET DWG NO 1 2 3 6 5 4 B A A B C D C D of DRAWN BY SIZE TITLE PREPARED FOR: BY: C Neoventus Design Group, LLC 2350 Commonwealth Dr. Suite E Charlottesville, VA www.neoventus.com DWG_NUMBER CONFIDENTIAL 1.0 2012.Jan.23 Initial Release Copyright (C) 2012 Outsite Networks, Inc. All rights reserved. Confidential and trade secret material of Outsite Networks, Inc. 1. The symbol denotes components not (normally) inserted. This component may be a contigency or for developement only. LEDS KEYPAD 6 8 8 RFID ANTENNA FLEX BOARD 50 CONTACT GOLD FINGER FPC Function NOT contained within UI - shown for clarity MALE PIN 8 2. ID resistors used to indicate User Interface type and revision number. Caps added, artwork patterns changed for RFID performance 2012.Apr.17 2.0 SM FID 1.05mm FID4 FID3 FID 1.05mm SM 2 2 NEOVENTUS DES. GRP. 2.0 User Interface - Flex Keypad Version 4 5 6 3 2 1 REV SCALE SHEET DWG NO 1 2 3 6 5 4 B A A B C D C D of DRAWN BY SIZE TITLE C DWG_NUMBER 20-04-2012_13:43 CONFIDENTIAL FID 1.05mm FID2 SM FID1 SM FID 1.05mm +5.0V SM FPC FINGER, 50X1 J1 1 3 2 5 4 6 7 8 9 10 17 16 15 13 11 12 14 18 19 20 27 26 25 23 21 22 24 28 29 30 40 39 38 34 32 31 33 35 36 37 45 44 43 41 42 46 48 47 50 49 R1 0, JUMPER 0805 5% 0, JUMPER R2 5% 0805 R3 5% 0805 0, JUMPER C1 27PF 0603 100V 1% NPO C2 27PF 0603 100V 1% NPO C3 15PF 0603 100V 1% NPO C4 15PF 0603 100V 1% NPO R4 1.00 0603 1% R5 1.00 0603 1% +5.0V MT3 5.10MMX9.89MM TH 5.1mm/7.0mm TH MT4 MT1 4.0mm/6.5mm TH 4.0mm/6.5mm TH MT5 SM RED 30mA 2.2VF LD1 TH MT2 4.0mm/6.5mm MT6 TH 4.0mm/6.5mm 2.2VF 30mA SM RED LD2 C5 15PF 0603 100V 1% NPO C6 15PF 0603 100V 1% NPO SM 2.2VF RED 30mA LD6 RED 2.2VF 30mA SM LD5 2.2VF 30mA SM LD4 RED SM J4 HORIZ, MALE, 8X1 1 2 3 4 5 6 7 8 LED1 LED1 LED2 LED2 LED3 LED3 LED4 LED4 LED5 LED5 ID1 ID1 ID0 ID0 KEYPAD-ROW3 KEYPAD-ROW3 KEYPAD-COL3 KEYPAD-COL3 KEYPAD-ROW2 KEYPAD-ROW2 KEYPAD-ROW0 KEYPAD-ROW0 KEYPAD-COL2 KEYPAD-COL2 KEYPAD-COL1 KEYPAD-COL1 KEYPAD-COL0 KEYPAD-COL0 KEYPAD-ROW1 KEYPAD-ROW1 ID2 ID2 RFID-ANTENNA-OUT WPS-RFID-ANTENNA-IN WPS-RFID-ANTENNA-IN RFID-ANTENNA-IN WPS-RFID-ANTENNA-OUT WPS-RFID-ANTENNA-OUT UI BOARD ID RESISTOR TABLE LEDS CARD-CIN KEYPAD INPUT ID0 ID1 ID2 DESCRIPTION FIDUCIALS VALUE 0 1 0 1 0 1 0 1 0 1 GOLD FINGERS MOUNTING HOLES 0 1 0 1 0 1 0 1 0 1 0 1 0 1 RESERVED FOR DETECTION OF NO UI INSTALLED NON-INTELLIGENT KEYPAD INTERFACE R01 IDn = 1 INDICATES A NON-INSERTED ID RESISTOR LCD INTERFACE R01 RESERVED FOR FUTURE INTERFACES AND/OR REVISIONS RESERVED FOR FUTURE INTERFACES AND/OR REVISIONS RESERVED FOR FUTURE INTERFACES AND/OR REVISIONS RESERVED FOR FUTURE INTERFACES AND/OR REVISIONS RESERVED FOR FUTURE INTERFACES AND/OR REVISIONS IDn = 0 INDICATES INSERTED ID RESISTOR; +3.3V CARD-PWRDOWN CARD-RDD1 CARD-RCP1 CARD-CPD CARD-RDD2 CARD-RCP2 CARD-RDD3 CARD-RCP3 SPI-MOSI SPI-MISO SPI-CLK SPI-CS +3.3V +3.3V +3.3V +3.3V +3.3V TEXT IN LIEU OF NET INDICATES A PIN RESERVED FOR THE GIVEN FUNCTION

DWG_NUMBER CONFIDENTIAL 30-04-2012_13:28 http://www2.outsitenetworks.com/ Outsite Networs, Inc. Norfolk, VA 23513 2551 Eltham Avenue, Ste N Block Diagram 1 10 Neoventus 2.0 WPS03 NOTES Rev. Date Description Revision History 4 5 6 3 2 1 REV SCALE SHEET DWG NO 1 2 3 6 5 4 B A A B C D C D of DRAWN BY SIZE TITLE PREPARED FOR: BY: C Neoventus Design Group, LLC 2350 Commonwealth Dr. Suite E Charlottesville, VA 22901 www.neoventus.com KEYPAD RJ45 SERVER - PCM-3343 Added debug LEDs Header +24.0V +5.0V Reset Sequencing Header RJ45 USB-A USB-A (CONTINGENCY) Sheet 8 RFID USB-Header & +1.8V Driver RS232 Sheet 4 Sheet 2 INTERNAL FLASH RJ45 PWR CNTL RJ45 +3.3V +9V Sheet 2 +1.0V USB-B RS232 RS232 Sheet 2 Sheet 2 USB-A 2012.Apr.24 2.0 Sheet 4 Sheet 4 Regulation Clock USB HUB Power/System Management Sheet 4 Function NOT contained within CPU - shown for clarity Sheet 2 JTAG Audio 2MB Sheet 5 CARD CAGE 2GB Micro SD LPDDR AT91SAM9M10 Sheet 6 Sheet 7 DEVICE FS USB1 ENET PHY 2012.Feb.07 RJ45 Header HOST HS USB UART 2/3 UART 0 / DEBUG UART UART 1 LEDs SPI1 DDR CONTROLLER SPI0 EMAC MCI Header USB-A PRINTER GPIO FLEX CABLE CONNECTOR Header Header CARD READER LCD/ TOUCH LCD GPIO Header GPIO GPIO XFMR uSD CARD 3. Inter-sheet references, delineated within brackets < >, are formatted as such. component may be a contingency or for development only. 2. Bus numbering is referenced by [M:L], where 'M' is the most significant value and 'L' the least significant. The first field denotes the page the signal goes to, or comes from. Following the '-', the two character field denotes the coordinates within the page and references the Y, X grid defined by the sheet border. (e.g. <4-D1> ... page 4, coordinates D (Y) and 1 (X). denotes components not (normally) inserted. This Confidential and trade secret material of Outsite Networks. 1. The symbol Copyright (c) 2012 Outsite Networks All rights reserved. Initial release 1.0 Bottom side population option for SD card Updated RFID filter components Changed USB Hub Clocking Misc tweaks based on alpha testing VERT MALE, 10X2 TH J9 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 17 19 18 20 X7R 10% 25V 0603 0.1uF C95 C94 0.1uF 0603 25V 10% X7R X7R 10% 25V 0603 0.1uF C35 Y1 32.768KHZ 3.2x1.5MM CONFIDENTIAL 30-04-2012_13:28 DWG_NUMBER Neoventus 2.0 Microcontroller Power & System Functions WPS03 2 10 4 5 6 3 2 1 REV SCALE SHEET DWG NO 1 2 3 6 5 4 B A A B C D C D of DRAWN BY SIZE TITLE C C16 15pF 0603 50V 5% NPO +1.0V +3.3V +1.0V 10uF 10% 0805 10V X5R C60 X7R 10% 25V 0603 0.1uF C61 0603 0.5A BEAD FB2 X7R 10% 25V 0603 0.1uF C62 0.5A BEAD FB17 0603 LFBA324 AT91SAM9M10 U1 E2 F3 E5 D1 C3 C1 M10 V12 V11 V18 T11 V10 U10 R11 R10 P10 N10 E4 JTAGSEL TRST_N TMS TDI RTCK TCK TDO BMS VBG XOUT XIN RST_N XIN32 WKUP XOUT32 TST SHDN TSADVREF Y2 12.000MHZ 5.0x3.2MM +3.3V FB16 0.5A BEAD 0603 10uF 10% 0805 10V X5R C36 +3.3V 10uF 10% 0805 10V X5R C37 X7R 10% 25V 0603 0.1uF C52 C70 0.1uF 0603 25V 10% X7R X7R 10% 25V 0603 0.1uF C73 C81 0.1uF 0603 25V 10% X7R C38 0.1uF 0603 25V 10% X7R C69 0.1uF 0603 25V 10% X7R R104 15.0K 0603 1% X7R 10% 25V 0603 0.1uF C53 C54 0.1uF 0603 25V 10% X7R X7R 10% 25V 0603 0.1uF C43 C65 0.1uF 0603 25V 10% X7R X7R 10% 25V 0603 0.1uF C64 C63 0.1uF 0603 25V 10% X7R +3.3V +1.0V +3.3V X5R 10% 10V 0805 10uF C68 +1.8V +1.0V +3.3V +3.3V R21 30.1K 0603 1% 1% 0603 30.1K R19 FB4 0.5A BEAD 0603 R20 30.1K 0603 1% 1% 0603 30.1K R23 +3.3V +1.8V U1 AT91SAM9M10 LFBA324 D4 D3 F6 E18 E3 D16 C16 C2 M14 L13 L12 K13 K12 K11 K10 K9 J13 J12 J11 J10 J9 H13 H12 H11 H10 H9 H3 G13 G12 G11 G10 G9 V17 V14 V13 U18 U17 U12 U11 P11 VDDPLLA VDDOSC GNDOSC GNDUTMI VDDUTMIC VDDPLLUTMI VDDIOP2 VDDUTMII GNDCORE_0 VDDIOM1_2 VDDIOM1_3 VDDCORE_1 VDDCORE_2 VDDIOP1 GNDCORE_1 GNDIOP_0 VDDCORE_3 GNDIOM_0 GNDIOM_1 GNDCORE_2 GNDCORE_3 GNDIOP_1 GNDIOM_2 GNDIOM_3 VDDIOP0_0 VDDIOP0_1 GNDIOM_4 GNDIOM_5 VDDIOM0_0 VDDIOM0_1 VDDIOM0_2 VDDIOM0_3 GNDANA GNDIOM_6 VDDIOM1_0 VDDANA VDDCORE_0 VDDIOM1_1 GNDBU VDDBU R22 1.50K 0603 1% R48 1.50K 0603 1% C21 27PF 0603 50V 5% NPO C17 15pF 0603 50V 5% NPO C34 27PF 0603 50V 5% NPO +3.3V R14 0, JUMPER 0805 5% +3.3V-BU R10 0, JUMPER 0805 5% R11 0, JUMPER 0805 5% R12 0, JUMPER 0805 5% R13 0, JUMPER 0805 5% <7-B5> R120 27.0 0603 1% 6.81K 1% 0603 R126 C20 10PF 0603 50V 5% NPO 0, JUMPER 0805 5% R129 15.0K R130 1% 0603 C39 0.1uF 0603 25V X7R 10% 0603 0.1uF C40 X7R 10% 25V +3.3V +3.3V-ANA +3.3V-ANA 5% 0805 0, JUMPER R138 C41 0.1uF 0603 25V 10% X7R J23 SOCKET, BATT, CR2032 SM N1P1 200mW 75V 0.3A SOD-323 1N4148HWS D20 D21 1N4148HWS SOD-323 0.3A 75V 200mW +3.3V +3.3V-BU +3.3V-BU 0603 0.1uF C80 X7R 10% 25V R163 5% 0805 0, JUMPER +3.3V-BU 1/10W 0603 71.5K R162 1% RTCK RTCK TDO TDO TMS TMS JTAGSEL TDI TDI TCK TCK TRST-N TRST-N RST-N RST-N JTAG/Debug Header Place components close to processor and route traces to VBG and GNDUTMI pins. <9-C5> 1% 0603 10.0K R151 CONFIDENTIAL 30-04-2012_13:28 DWG_NUMBER Microcontroller & Memory 3 10 Neoventus 2.0 WPS03 4 5 6 3 2 1 REV SCALE SHEET DWG NO 1 2 3 6 5 4 B A A B C D C D of DRAWN BY SIZE TITLE C <4-A3> <4-A3> LFBA324 U1 AT91SAM9M10 E10 D10 F12 F11 F10 E11 D11 D9 C11 C9 B12 B11 B9 A14 A13 A12 A11 A10 A9 WR3_N/BS3_N CS0_N DQS0 RAS_N SDCK SDCK_N SDA10 DQM0 SDCKE WR0_N/WE_N CAS_N WR1_N/BS1_N DQM1 DQS1 CS1_N/SDCS_N RD_N SDWE_N NANDOE_N NANDWE_N <8-C6> <8-C4> <5-B3> <4-B6> <6-B6> <6-B6> <6-B6> U1 AT91SAM9M10 LFBA324 F9 F8 F7 E9 E8 E7 E6 D8 D7 D6 D5 C8 C7 C6 C5 C4 B8 B7 B6 B5 B4 B3 B2 B1 A8 A7 A6 A5 A4 A3 A2 A1 D27/PC27 D28/PC28 D25/PC25 D20/PC20 A25/CFRNW/PC12 A24/PC7 A22/NANDCLE/PC5 DQM2/PC0 D31/PC31 D29/PC29 D30/PC30 D22/PC22 D17/PC17 CS4_N/CFCS0/TCLK2/PC10 CS5_N/CFCS1/CTS2/PC11 A19/PC2 D26/PC26 D21/PC21 WAIT_N/PC15 CFCE2/RTS2/PC9 A20/PC3 D24/PC24 D18/PC18 CS2_N/PC13 A23/PC6 D23/PC23 D16/PC16 CFCE1/PC8 DQM3/PC1 D19/PC19 CS3_N/NANDCS/PC14 A21/NANDALE/PC4 <5-C4> <5-C5> +1.8V BGA60 MT46H128M16L U5 G3 H7 G7 G8 G9 F7 B3 E2 A2 D3 E3 C1 D9 F8 E8 F3 B2 C3 C2 D2 E7 D8 D7 C8 C7 B8 B7 A8 E9D1C9A7K9F9A9 B9 E1 B1 A3 K1 F1 A1 G2 G1 F2 H9 H8 H3 H2 J7 H1 J3 J2 J1 K3 K2 K8 K7 J9 J8 A0 A1 A2 A3 A4 A5 A6 A7 …

Text truncated - open the document above for the full version.

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ! BALTIMORE, MARYLAND 21230-3432 ! PHONE (410) 354-3300 ! FAX (410) 354-3313 33439 WESTERN AVENUE ● UNION CITY, CALIFORNIA 94587 ● PHONE (510) 489-6300 ● FAX (510) 489-6372 3162 BELICK STREET ● SANTA CLARA, CALIFORNIA 95054 ● PHONE (408 748-3585 ● FAX (510) 489-6372 13301 MCCALLEN PASS ● AUSTIN, TX 78753 ● PHONE (512) 287-2500 ● FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory November 30, 2012 Outsite Networks, Inc. 2551 Eltham Ave, Suite N Norfolk, VA 23513 Dear Wim Vanderbijl, Enclosed is the EMC test report for compliance testing of the Outsite Networks, Inc., All Points Printer - Model 1: APL (LED/Keypad), tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Part 15, Subpart B and ICES-003, Issue 5 August 2012 for a Class A Digital Device, and Part 15.225, Subpart C and RSS-210, Issue 8, Dec. 2010 for Certification as an Intentional Radiator. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Outsite Networks, Inc.\ EMC35904-FCC225 Rev. 1) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. This letter of transmittal is not a part of the attached report. DOC-EMC705 2/26/2004 MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ! BALTIMORE, MARYLAND 21230-3432 ! PHONE (410) 354-3300 ! FAX (410) 354-3313 33439 WESTERN AVENUE ● UNION CITY, CALIFORNIA 94587 ● PHONE (510) 489-6300 ● FAX (510) 489-6372 3162 BELICK STREET ● SANTA CLARA, CALIFORNIA 95054 ● PHONE (408 748-3585 ● FAX (510) 489-6372 DOC-EMC705 2/26/2004 Electromagnetic Compatibility Criteria Test Report For the Outsite Networks, Inc. All Points Printer - Model 1: APL (LED/Keypad) Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices & 15.225 Subpart C & RSS-210, Issue 8, Dec. 2010 for Intentional Radiators MET Report: EMC35904-FCC225 Rev. 1 November 30, 2012 Prepared For: Outsite Networks, Inc. 2551 Eltham Ave, Suite N Norfolk, VA 23513 Prepared By: MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Outsite Networks, Inc. Electromagnetic Compatibility All Points Printer CFR Title 47, Part 15B, 15.225; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMC35904-FCC225 Rev. 1 © 2012, MET Laboratories, Inc. Page ii of vi DOC-EMC705 2/26/2004 Electromagnetic Compatibility Criteria Test Report For the Outsite Networks, Inc. All Points Printer - Model 1: APL (LED/Keypad) Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices & 15.225 Subpart C & RSS-210, Issue 8, Dec. 2010 for Intentional Radiators MET Report: EMC35904-FCC225 Rev. 1 Zijun Tong, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules Parts 15B and 15.225 and Industry Canada standards ICES-003, Issue 5 August 2012 and RSS-210, Issue 8, Dec. 2010 under normal use and maintenance. Dusmantha Tennakoon, Wireless Manager, Electromagnetic Compatibility Lab Outsite Networks, Inc. Electromagnetic Compatibility All Points Printer CFR Title 47, Part 15B, 15.225; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMC35904-FCC225 Rev. 1 © 2012, MET Labora…

Text truncated - open the document above for the full version.