U2M-WBR5200MGN802.11abgn Router

WLR-6000 Power ON Activez Anschalten Inschakelen Ενεργοποίηση Activez Anschalten Inschakelen Ενεργοποίηση A B C Power OFF Désactivez Ausschalten Uitschakelen Απενεργοποίηση 1 Connect the router to your modemUK/FR/DE/NL/GR 2 Make a connection to your PC Installation guide Guide d’installation Installationshandbuch Handleiding Οδηγός Εγκατάστασης router wireless gigabit 450N Troubleshooting Dépannage Fehlerbehebung Problemen oplossen Αντιμετώπιση προβλημάτων Cliquez sur Klick Klik Κλικ Finish enjoy sur! ng! Fini Bon surf! Fertig Viel Spaß beim Surfen! Klaar Veel internet plezier! Τέλος Απολαύστε σερφάρισμα! www.sitecom.com Option 4: LAN Create a wired network Créez un réseau E laire Erstellen Sie ein Kabelnetzwerk Creëer een bedraad netwerk Δημιουργία ενσύρματου δικτύου Option 2: Cliquez sur Klick Klik Κλικ Double-cliquez sur Doppelklick Dubbelklikken Διπλό κλικ Cliquez sur Klick Klik Κλικ Wait 2 min. Attendez 2 min. 2 min. warten Wacht 2 min. Περιμένετε 2 λεπτά Create a wireless network with OPS security (Software) Créer un réseau sans E l à l’OPS de sécurité (Software) Erstellen Sie ein drahtloses Netzwerk mit OPS Sicherheit (Software) Creëer een draadloos netwerk met OPS beveiliging (Software) Δημιουργία ασύρματου δικτύου με ασφάλεια OPS (Software) A B C Option 1: 2 Sek. gedrückt halten Push 2 sec. Appuyez pendant 2 sec. Druk 2 sec. Πιέστε 2 δευτ. Create a wireless network with OPS security (Hardware) Créez un réseau sans E l à l’OPS de sécurité (Hardware) Erstellen Sie ein drahtloses Netzwerk mit OPS Sicherheit (Hardware) Creëer een draadloos netwerk met OPS beveiliging (Hardware) Δημιουργία ασύρματου δικτύου με ασφάλεια OPS (Hardware) Wait 2 min. Attendez 2 sec. 2 Min. warten Wacht 2 min. Περιμένετε 2 λεπτά For 2.4 GHz push 0-5 sec. For 5 GHz push 5-10 sec. + BlinkOPS + BlinkOPS Appuyez pendant 0-5 sec. 0-5 Sek. gedrückt halten Druk 0-5 sec. Πιέστε 0-5 δευτ. Appuyez pendant 5-10 sec. 5-10 Sek. gedrückt halten Druk 5-10 sec. Πιέστε 5-10 δευτ. A B C D E For 2.4 GHz push 0-5 sec. For 5 GHz push 5-10 sec. + BlinkOPS + BlinkOPS Appuyez pendant 0-5 sec. 0-5 Sek. gedrückt halten Druk 0-5 sec. Πιέστε 0-5 δευτ. Appuyez pendant 5-10 sec. 5-10 Sek. gedrückt halten Druk 5-10 sec. Πιέστε 5-10 δευτ. Établir une connexion à votre PC Stellen Sie eine Verbindung zum PC her Maak een verbinding met je PC Δημιουργία σύνδεσης με το PC σας Connectez le routeur à votre modem Verbinden Sie den Router mit Ihrem Modem Verbind de router met het modem Συνδέστε το δρομολογητή στο μόντεμ σας 3 Check your connection http://www.sitecomcloudsecurity.com press Enter Appuyez sur ENTER Drücken Sie die Eingabetaste Druk op ENTER Πατήστε Enter Facultative Optional Optioneel Προαιρετικό click click click (optional) VériE ez votre connexion Überprüfen Sie Ihre Verbindung Controleer je verbinding Ελέγξτε τη σύνδεση © powered by Hitman Pro Use these codes to activate your free 6 months subscription: Key Code: This key code is only valid for 6 months after purchase Security Code: powered by Hitman Pro technology Sitecom Cloud Security information card owered by opobredwerbredwer ‘key code’ ‘security code’ click click WPS click click WPS Double-cliquez sur Doppelklick Dubbelklikken Διπλό κλικ Double-cliquez sur Doppelklick Dubbelklikken Διπλό κλικ B D A click click Double-cliquez sur Doppelklick Dubbelklikken Διπλό κλικ Cliquez sur Klick Klik Κλικ C D click click click OK = ok Option 3: Create a wireless network Créez un réseau sans E l Erstellen Sie ein drahtloses Netzwerk Creëer een draadloos netwerk Δημιουργία ασύρματου δικτύου Bottom of the router Arrière du routeurr Rückseite Router Onderzijde router Πίσω όψη δρομολογητή ‘network name’ Bottom of the router Arrière du routeurr Rückseite Router Onderzijde router Πίσω όψη δρομολογητή Power ON ‘WPA2 code’ click Line Power 5 GHz WPS Power 2.4 GHz WPS Power 2.4 GHz WPS Power 5 GHz WPS WLR-6000 QIG 070912011 indd 114-09-11 11:17 R-6000-V1001-Q1 A B C Line WLR-6000 scollegarecollegarecollegare apagar alimentação OFF выключить encender alimentação ON включить encender alimentação ON включить 1 Collegare il router al modemIT/ES/PO/RU/PL 2 Creare una connessione con il PC Risoluzione dei problemi Wyłącz zasilanieWłącz zasilanieWłącz zasilanie LAN Creare una rete cablata Crear una red cableada Crie uma rede ligada por cabo Создание проводных сетей Utwórz sieć przewodową Opzione 4: Guida all’installazione Guía de instalación Guia de instalação Руководство по установке Instrukcja instalacji router wireless gigabit 450N Listo Disfrute navegando! Concluir Divirta™se a surfar! конец Наслаждайтесь интернетом! Koniec Miłego surfowania w sieci! Fine Buona navigazione! www.sitecom.com Opzione 2 : Creare una rete wireless con sicurezza OPS (Software) Crear una red inalámbrica con seguridad OPS (Software) Crie uma rede sem E os com protecção OPS (Software) Создать беспроводную сеть с ОПС безопасности (Software) Utwórz sieć bezprzewodową z zabezpieczeniem OPS (Software) Opzione 1: Creare una rete wireless con sicurezza OPS (Hardware) Crear una red inalámbrica con seguridad OPS (Hardware) Crie ume rede sem E os com protecção OPS (Hardware) Создать беспроводную сеть с ОПС безопасности (Hardware) Presione 0-5 seg. Prima 0-5 s. Нажмите 0-5 секунды Naciśnij przez 0-5 sek. Premere 2 sec. Presione 2 seg. Prima 2 s Нажмите 2 секунды Naciśnij przez 2 sek. Utwórz sieć bezprzewodową z zabezpieczeniem OPS (Hardware) A B C Per spingere 2.4 GHz 0-5 sec. Power 5 GHz WPS Per spingere 5 GHz 5-10 sec. Power 2.4 GHz WPS + BlinkOPS + BlinkOPS Presione 5-10 seg. Prima 5-10 s. Нажмите 5-10 секунды Naciśnij przez 5-10 sek. A B C D E Power 2.4 GHz WPS Power 5 GHz WPS Per spingere 5 GHz 5-10 sec. + BlinkOPS + BlinkOPS Presione 5-10 seg. Prima 5-10 s. Нажмите 5-10 секунды Naciśnij przez 5-10 sek. Per spingere 2.4 GHz 0-5 sec. Presione 0-5 seg. Prima 0-5 s. Нажмите 0-5 секунды Naciśnij przez 0-5 sek. Conecte el router a su módem Ligue o router ao seu modem Подключите маршрутизатор к модему Podłącz router do modemu Crear un…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

1Page 1/1

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

FCC ID: U2M-WBR5200MGN Report No.: 110915C27 Operational Description This device is an 802.11abgn Router, which operates in both 2.4GHz and 5GHz bands; the maximum data rate could be up to 450Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 450Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 12Vdc power adapter. The antenna is PIFA antenna with IPEX antenna connector. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

Report No.: SA110915C27 1 Report Format Version 4.0.0 RF EXPOSURE REPORT REPORT NO.: SA110915C27 MODEL NO.: WBR5200MGN, WBR4200MGN, WBR-7070, WLR-6000 v1 001, WLR-5000 v1 002 FCC ID: U2M-WBR5200MGN RECEIVED: Sep. 15, 2011 TESTED: Oct. 3 ~ 5, 2011 ISSUED: Oct. 19, 2011 APPLICANT: Senao Networks, Inc. ADDRESS: 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist.,New Taipei City, Taiwan ( R.O.C. ) This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110915C27 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD...................................................................................3 1. CERTIFICATION.............................................................................................4 2. RF EXPOSURE LIMIT....................................................................................5 3. MPE CALCULATION FORMULA....................................................................5 4. CLASSIFICATION...........................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER..................6 Report No.: SA110915C27 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110915C27 Original release Oct. 19, 2011 Report No.: SA110915C27 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: 802.11abgn Router BRAND NAME 1: Senao Networks MODEL NO.: WBR5200MGN, WBR4200MGN BRAND NAME 2: LG-ERICSSON MODEL NO.: WBR-7070 BRAND NAME 3: SITECOM MODEL NO.: WLR-6000 v1 001, WLR-5000 v1 002 APPLICANT: Senao Networks, Inc. TEST ITEM: ENGINEERING SAMPLE TESTED: Oct. 3 ~ 5, 2011 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model no.: WBR5200MGN) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No.: SA110915C27 5 Report Format Version 4.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110915C27 6 Report Format Version 4.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 26.1 4.69 20 0.2386 1.00 5180-5240 16.9 4.64 20 0.0284 1.00 5745-5825 27.6 4.64 20 0.3332 1.00 --- END ---

Report No.: RF110915C27-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110915C27-1 MODEL NO.: WBR5200MGN (Refer to item 3.1 for the more details) FCC ID: U2M-WBR5200MGN RECEIVED: Sep. 15, 2011 TESTED: Oct. 3 ~ 5, 2011 ISSUED: Oct. 19, 2011 APPLICANT: Senao Networks, Inc. ADDRESS: 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist.,New Taipei City, Taiwan ( R.O.C. ) This test report consists of 179 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110915C27-1 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................5 1. CERTIFICATION..............................................................................................6 2. SUMMARY OF TEST RESULTS......................................................................7 2.1 MEASUREMENT UNCERTAINTY...................................................................7 3. GENERAL INFORMATION..............................................................................8 3.1 GENERAL DESCRIPTION OF EUT.................................................................8 3.2 DESCRIPTION OF TEST MODES.................................................................10 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST............................................12 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.................13 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS................................17 3.4 DESCRIPTION OF SUPPORT UNITS...........................................................17 4. TEST TYPES AND RESULTS (FOR 2.4GHZ BAND).....................................18 4.1 CONDUCTED EMISSION MEASUREMENT..................................................18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...............................18 4.1.2 TEST INSTRUMENTS...................................................................................18 4.1.3 TEST PROCEDURES....................................................................................19 4.1.4 DEVIATION FROM TEST STANDARD..........................................................19 4.1.5 TEST SETUP.................................................................................................20 4.1.6 EUT OPERATING CONDITIONS...................................................................20 4.1.7 TEST RESULTS.............................................................................................21 4.2 RADIATED EMISSION MEASUREMENT......................................................23 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................23 4.2.2 TEST INSTRUMENTS...................................................................................24 4.2.3 TEST PROCEDURES....................................................................................25 4.2.4 DEVIATION FROM TEST STANDARD..........................................................25 4.2.5 TEST SETUP.................................................................................................26 4.2.6 EUT OPERATING CONDITIONS...................................................................26 4.2.7 TEST RESULTS.............................................................................................27 4.3 6dB BANDWIDTH MEASUREMENT.............................................................46 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT..........................................46 4.3.2 TEST INSTRUMENTS...................................................................................46 4.3.3 TEST PROCEDURE......................................................................................46 4.3.4 DEVIATION FROM TEST STANDARD..........................................................46 4.3.5 TEST SETUP.................................................................................................47 4.3.6 EUT OPERATING CONDITIONS...................................................................47 4.3.7 TEST RESULTS.............................................................................................48 4.4 MAXIMUM OUTPUT POWER........................................................................54 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT.........................54 4.4.2 INSTRUMENTS.............................................................................................54 4.4.3 TEST PROCEDURES....................................................................................54 4.4.4 DEVIATION FROM TEST STANDARD..........................................................55 4.4.5 TEST SETUP.................................................................................................55 4.4.6 EUT OPERATING CONDITIONS...................................................................55 Report No.: RF110915C27-1 3 Report Format Version 4.0.0 4.4.7 TEST RESULTS.............................................................................................56 4.5 POWER SPECTRAL DENSITY MEASUREMENT.........................................58 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT......................58 4.5.2 TEST INSTRUMENTS...................................................................................58 4.5.3 TEST PROCEDURE......................................................................................58 4.5.4 DEVIATION FROM TEST STANDARD..........................................................59 4.5.5 TEST SETUP.....................................................................…

Text truncated - open the document above for the full version.

Report No.: RF110915C27 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF110915C27 MODEL NO.: WBR5200MGN (Refer to item 3.1 for the more details) FCC ID: U2M-WBR5200MGN RECEIVED: Sep. 15, 2011 TESTED: Oct. 3 ~ 5, 2011 ISSUED: Oct. 19, 2011 APPLICANT: Senao Networks, Inc. ADDRESS: 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist.,New Taipei City, Taiwan ( R.O.C. ) This test report consists of 106 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110915C27 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................4 1. CERTIFICATION............................................................................................5 2. SUMMARY OF TEST RESULTS....................................................................6 2.1 MEASUREMENT UNCERTAINTY..................................................................6 3. GENERAL INFORMATION.............................................................................7 3.1 GENERAL DESCRIPTION OF EUT...............................................................7 3.2 DESCRIPTION OF TEST MODES.................................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST..........................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS..............................13 3.4 DESCRIPTION OF SUPPORT UNITS.........................................................13 4. TEST TYPES AND RESULTS......................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT...............................................14 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.............................14 4.1.2 TEST INSTRUMENTS.................................................................................14 4.1.3 TEST PROCEDURES..................................................................................15 4.1.4 DEVIATION FROM TEST STANDARD........................................................15 4.1.5 TEST SETUP...............................................................................................16 4.1.6 EUT OPERATING CONDITIONS.................................................................16 4.1.7 TEST RESULTS...........................................................................................17 4.2 RADIATED EMISSION MEASUREMENT....................................................19 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT..................................19 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS19 4.2.3 TEST INSTRUMENTS.................................................................................20 4.2.4 TEST PROCEDURES..................................................................................21 4.2.5 DEVIATION FROM TEST STANDARD........................................................21 4.2.6 TEST SETUP...............................................................................................22 4.2.7 EUT OPERATING CONDITION...................................................................22 4.2.8 TEST RESULTS...........................................................................................23 4.3 PEAK TRANSMIT POWER MEASUREMENT.............................................37 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT...........................37 4.3.2 TEST INSTRUMENTS.................................................................................37 4.3.3 TEST PROCEDURE....................................................................................38 4.3.4 DEVIATION FROM TEST STANDARD........................................................38 4.3.5 TEST SETUP...............................................................................................38 4.3.6 EUT OPERATING CONDITIONS.................................................................38 4.3.7 TEST RESULTS...........................................................................................39 4.4 PEAK POWER EXCURSION MEASUREMENT..........................................44 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT........................44 4.4.2 TEST INSTRUMENTS.................................................................................44 4.4.3 TEST PROCEDURE....................................................................................44 4.4.4 DEVIATION FROM TEST STANDARD........................................................45 Report No.: RF110915C27 3 Report Format Version 4.0.0 4.4.5 TEST SETUP...............................................................................................45 4.4.6 EUT OPERATING CONDITIONS.................................................................45 4.4.7 TEST RESULTS...........................................................................................46 4.5 PEAK POWER SPECTRAL DENSITY MEASUREMENT............................56 4.5.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT..........56 4.5.2 TEST INSTRUMENTS.................................................................................56 4.5.3 TEST PROCEDURES..................................................................................56 4.5.4 DEVIATION FROM TEST STANDARD........................................................57 4.5.5 TEST SETUP...............................................................................................57 4.5.6 EUT OPERATING CONDITIONS......…

Text truncated - open the document above for the full version.

Report No.: RF110915C27-1 1 Report Format Version 4.0.0 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: RF110915C27-1 2 Report Format Version 4.0.0 RADIATED EMISSION TEST