U2ZZW3104Z-wave OPP Plug-in Dimmer

Z-Wave ® Certified Wireless Lighting Control Certifié Z-Wave Commande d’éclairage sans fil Control inalámbrico para iluminación certificado por Z-Wave ® 28166 ZW3104 WARRANTY JASCO Products warrants this product to be free from manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damage, so the above limitations may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. Please contact Customer Service at 800-654-8483 (option 1) between 7:30AM – 5:00PM CST or via our website (www.jascoproducts.com) if the unit should prove defective within the warranty period. GARANTIE JASCO Products garantit que ce produit est exempt de tout défaut de fabrication pour une période de deux ans à compter de la date de l’achat original par l’acheteur. Cette garantie se limite exclusivement à la réparation ou au remplacement de ce produit et n’est pas applicable aux dommages indirects ou accessoires survenus sur d’autres produits utilisés avec ce produit. Cette garantie se substitue à toute autre garantie expresse ou implicite. Certains États ne permettent pas de restrictions quant à la durée d’une garantie implicite ou permettent l’exclusion ou la limitation des dommages indirects et acces- soires; il se peut, par conséquent, que cette garantie ne s’applique pas dans votre cas. Cette garantie vous confère des droits juridiques précis; vous pouvez jouir d’autres droits qui peuvent varier d’un État à l’autre. Veuillez communiquer avec le service à la clientèle au 1-800-654-8483 (option 1) entre 7 h 30 et 17 h (heure normale du Centre) ou par l’intermédiaire de notre site Web (www.jascoproducts. com) si l’appareil s’avère défaillant au cours de la période de garantie. GARANTÍA JASCO Products garantiza que este producto está libre de defectos de fabricación durante un periodo de dos años a partir de la fecha original de compra por parte del consumidor. Esta garantía se limita a la reparación o sustitución de este producto solamente y no se extiende a daños derivados o accidentales causados a otros productos que se usen con esta unidad. Esa garantía remplaza a todas las demás garantías expresas o implícitas. Algunos estados no autorizan limitaciones en cuanto a la duración de una garantía implícita ni permiten la exclusión o limitación por daños accidentales o derivados; por lo tanto, puede que las anteriores limitaciones no apliquen en su caso. Esta garantía le da a usted derechos específicos, y otros que usted puede tener y que varían según el estado en el que usted reside. Si la unidad resultare defectuosa dentro del periodo de garantía, comuníquese por favor con Atención al Cliente en el 800-654-8483 (opción 1) entre 7:30 a.m. y 5:00 p.m., Hora del Centro, o a través de nuestro sitio de internet JASCO Products Company, Building B 10 E Memorial Rd. Oklahoma City, OK 73114 SPECIFICATIONS Power 120VAC, 60Hz Signal (Frequency) 908.4/916 MHz Maximum load for the Z-Wave controlled outlet: 2.5A; 300W Incandescent or 100W Dimmable CFL/LED Z-Wave controlled outlet is fused @ 5A. This fuse is not user serviceable. Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32–104° F (0–40° C) For indoor use only. Specifications subject to change without notice due to continuing product improvement SPÉCIFICATIONS Alimentation : 120V c.a., 60 Hz Signal (fréquence) : 908,4/916 MHz Charge maximale pour la prise commandée Z-Wave : 300W (2,5 A) (incandescent) 100W à intensité réglable ampoules à DEL et fluocompactes La prise commandée Z-Wave est équipée d’un fusible de 5 ampères. Ce fusible ne peut pas être réparé par l’utilisateur. Portée : Distance à vue entre la télécommande et le module de réception Z-Wave le plus proche allant jusqu’à 100 pi. Plage de températures de fonctionnement : de 32–104° F (0–40° C). Utilisation intérieure uniqueme`nt. En raison d’améliorations continues du produit, les spécifications peuvent faire l’objet de changements sans préavis. ESPECIFICACIONES: Energía 120 VCA, 60 Hz Señal (Frecuencia) 908,4/916 MHz Carga máxima para la toma Z-Wave: 2,5A 300W incandescente 100W CFL y LED atenuables La toma Z-Wave está protegida con fusible de 5A. El usuario no puede reparar este fusible. Alcance: Hasta 100 pies (30.5m) en línea de visión directa entre el controlador inalámbrico y el módulo receptor Z-Wave más próximo. Rango de temperatura de funcionamiento: 32–104° F (0–40° C) Sólo para uso espacios interiores. Especificaciones sujetas a cambio sin aviso debido a continuas mejoras del producto If you have any problems or questions, contact our tech support team at; 1-800-654-8483, option 1 Monday–Friday, 7:30–5pm CST For the most up-to-date product support, accessories, electronic (PDF) format manuals and more, visit www.jascoproducts.com/support • No user servicable parts in this unit. Si vous avez des problèmes ou des questions, communiquez avec notre équipe de soutien technique au 1-800-654-8483, option 1, du lundi au vendredi, de 7 h 30 à 17 h (HNC). Pour le soutien relatif aux produits le plus à jour, les accessoires, les manuels en format élec- tronique (PDF) et plus encore, visitez le site www.jascoproducts.com/support. • Aucune des pièces de ce dispositif ne peut être réparée par l’utilisateur. Si tiene problemas o dudas, comuníquese con nuestro equipo técnico al número: 1-800-654- 8483, opción 1 de lunes a viernes, de 7:30 a 5 p.m., hora estándar del centro (CST). Para recibir el soporte técnico más actualizado sobre…

Text truncated - open the document above for the full version.

Sheenway Asia Ltd Room 1313, 13/F, Austin Tower, Tsim Sha Tsui, Kowloon. Tel (86-755)82374246 Fax (86-755)82375277 Email: [email protected] Date: 03/09/2015 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize of Shenzhen Academy of Metrology and Quality Inspection and hereafter referred to as SMQ, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by of Shenzhen Academy of Metrology and Quality Inspection on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SMQ as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Helios Kan, Project Engineer Sheenway Asia Ltd REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Sheenway Asia Ltd Room 1313, 13/F, Austin Tower, Tsim Sha Tsui, Kowloon. Tel (86-755)82374246 Fax (86-755)82375277 Email: [email protected] Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: U2ZZW3104 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Helios Kan Project Engineer Sheenway Asia Ltd March 9, 2015

External Photo

Model: ZW3104 IC: 6924A-ZW3104

Internal Photo

FCC TEST REPORT For Z-wave OPP Plug-in Dimmer Model Number: ZW3104 FCC ID: U2ZZW3104 Report Number : WT148004862 Test Laboratory : Shenzhen Academy of Metrology and Quality Inspection National Digital Electronic Product Testing Center Site Location : No.4 TongFa Road, Xili Town, Nanshan District, Shenzhen, China Tel : 0086-755-86009898 Fax : 0086-755-86009898-31396 Web : www.smq.com.cn Report No.: WT148004862 Page 2/30 Test report declaration Applicant : SHEENWAY ASIA LTD. Address : Room1313, 13/F., AustinTower, 22-26AustinAvenu, TsimSha Tsui, Kowloon. Hong Kong. China Manufacturer : SHEENWAY ASIA LTD. Address : Room1313, 13/F., AustinTower, 22-26AustinAvenu, TsimSha Tsui, Kowloon. Hong Kong. China EUT Description : Z-wave OPP Plug-in Dimmer Model No : ZW3104 FCC ID : U2ZZW3104 Test Standards: FCC Part 15 (October 1, 2014 Edition) ANSI C63.10-2009 The EUT described above is tested by Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory to determine the maximum emissions from the EUT. Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory is assumed full responsibility for the accuracy of the test results. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with FCC Rules Part 15.249. The test report is valid for above tested sample only and shall not be reproduced in part without written approval of the laboratory. Project Engineer: Date: Apr.20,2015 (Chen Qichun) Apr.20,2015 Checked by: Date: (Yang Dongping) Apr.20,2015 Approved by: Date: (Lin Bin) Report No.: WT148004862 Page 3/30 TABLE OF CONTENTS TEST REPORT DECLARATION ........................................................................................................ 2 1. TEST RESULTS SUMMARY ................................................................................................... 5 2. GENERAL INFORMATION ...................................................................................................... 6 2.1. Report information .......................................................................................................... 6 2.2. Laboratory Accreditation and Relationship to Customer ......................................... 6 2.3. Measurement Uncertainty ............................................................................................. 7 3. PRODUCT DESCRIPTION ...................................................................................................... 8 3.1. EUT Description .............................................................................................................. 8 3.2. Related Submittal(s) / Grant (s) ................................................................................... 8 3.3. Block Diagram of EUT Configuration .......................................................................... 8 3.4. Operating Condition of EUT.......................................................................................... 9 3.5. Special Accessories ....................................................................................................... 9 3.6. Equipment Modifications ............................................................................................... 9 3.7. Support Equipment List ................................................................................................. 9 3.8. Test Conditions ............................................................................................................... 9 4. TEST EQUIPMENT USED ..................................................................................................... 10 5. CONDUCTED DISTURBANCE TEST .................................................................................. 11 5.1. Test Standard and Limit .............................................................................................. 11 5.2. Test Procedure ............................................................................................................. 11 5.3. Test Arrangement ......................................................................................................... 11 5.4. Test Data ....................................................................................................................... 12 6. RADIATED DISTURBANCE TEST ....................................................................................... 14 6.1. Test Standard and Limit .............................................................................................. 14 6.2. Test Procedure ............................................................................................................. 14 6.3. Test Arrangement ......................................................................................................... 14 6.4. Test Data ....................................................................................................................... 15 7. OCCUPIED BANDWIDTH ...................................................................................................... 25 7.1. Test Standard and Limit .............................................................................................. 25 7.2. Test Procedure ............................................................................................................. 25 Report No.: WT148004862 Page 4/30 7.3. Test Arrangement ......................................................................................................... 25 7.4. Test Data ....................................................................................................................... 25 8. BAND EDGE ............................................................................................................................. 27 8.1. Test Standard and Limit ..........................................................…

Text truncated - open the document above for the full version.