U399A429005625 Scale Hand Control

User’s Guide 625 Wireless Controls 9A429 This guide outlines basic operation of the wireless hand / foot control and the associated base station. If service is required, contact your authorized Midmark dealer. Dealer (name / phone): __________________________________ __________________________________ __________________________________ __________________________________ Date of Purchase: __________________ Midmark Corporation 60 Vista Drive Versailles, OH 45380-0286 Phone: 937-526-3662 Fax: 937-526-5542 www.midmark.com General Information © Midmark Corporation 2009 Intended Use This product is intended to control patient positioning while providing better patient access by eliminating the cord from the controller(s). Authorized CE Representative Countries in the EEC should direct all questions, inci- dents, and complaints to Midmark’s authorized CE Representative listed below: Midmark Europe SAS 22, Rue de St. Denis 53500 Ernee, FRANCE Phone: 33-2-430-517-76 Fax: 33-2-430-569-10 Calling for Service If service is required, contact your Midmark dealer. To contact Midmark directly: 1-800-MIDMARK (1-800-643-6275) Monday-Friday 8:00 am until 5:00 pm (EST) www.midmark.com 003-1945-00 Rev. B Limited WarrantyCompliance Information SCOPE OF WARRANTY Midmark Corporation (“Midmark”) warrants to the original purchaser its new Alternate Care products and components (except for components not warranted under “Exclusions”) manufactured by Midmark to be free from defects in material and workmanship under normal use and service. Midmark’s obligation under this warranty is limited to the repair or replace- ment, at Midmark’s option, of the parts or the products the defects of which are reported to Midmark within the applicable warranty period and which, upon examination by Midmark, prove to be defective. APPLICABLE WARRANTY PERIOD The applicable warranty period, measured from the date of delivery to the original user, shall be one (1) year for all warranted products and components. EXCLUSIONS This warranty does not cover and Midmark shall not be liable for the following: (1) repairs and replacements because of misuse, abuse, negligence, alteration, accident, freight damage, or tampering; (2) products which are not installed, used, and proper- ly cleaned as required in the Midmark “Installation” and or “Instal- lation / Operation Manual” for this applicable product. (3) products considered to be of a consumable nature; (4) accessories or parts not manufactured by Midmark; (5) charges by anyone for adjustments, repairs, replacement parts, installation, or other work performed upon or in connection with such products which is not expressly authorized in writing in advance by Midmark. EXCLUSIVE REMEDY Midmark’s only obligation under this warranty is the repair or replacement of defective parts. Midmark shall not be liable for any direct, special, indirect, incidental, exemplary, or consequential damages or delay, including, but not limited to, damages for loss of profits or loss of use. NO AUTHORIZATION No person or firm is authorized to create for Midmark any other obligation or liability in connection with the products. THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY WARRANTIES OF MERCHANT- ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica- tions. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. Any modifications to this product may violate the rules of the Federal Communications Commission and make operation of the product unlawful. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference recieved, including interference that may cause undesired operation. Declaration of Conformity Midmark Corporation declares that 9A429001 thru 9A429005 conform to the applicable requirements of the Radio Equipment & Telecommunications Equipment Directive 1999/5/EC, Annex II Serial Number: ALL Date: 10/13/2011 Quality Assurance Manager Don Carr Midmark Corporation 60 Vista Drive P.O. Box 286 Versailles, OH 45380 U.S.A. 077-0880-00 Specifications Range of Operation .............20 ft. (6 m) radius Batteries: Hand Control .................................AA (qty. 2) Foot Control ..................................AA (qty. 2) Troubleshooting When any control button is pressed, that controller sounds a single “beep”. (All functions operate) Cause: Low battery Solution: Replace batteries When any control button is pressed, nothing happens. (No “beeps”, no movement, etc.) Cause: 1. Batteries completely dead 2. Wireless controller has lost “association” to chair Solution: 1. Replace batteries 2. Perform Association Procedure* The wireless controllers will only function with the ... chair they have been “associated” with. This prevents unwanted movement in locations with more than one chair. If further service is required, contact your authorized Midmark dealer. Association Procedure The wireless controller will only function with the chair it has been “associated” with. This prevents unwanted movement in locations with more than one chair. Each wireless controller’s associati…

Text truncated - open the document above for the full version.

166 South Carter Street, Genoa City, WI 53128 Request for Confidentiality Date: October 26, 2011 FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 RE: Certification Application FCC ID: U399A429005 Pursuant to 47 CFR Section 0.459 Midmark Corporation understands that requests for non disclosure and confidential treatment is being made for the following information as stated under the Code of Federal Regulations Chapter 47, Part 0.459: • Block Diagram • Schematics • Description of Operation The above materials contain trade secrets, proprietary and technical information that would customarily be guarded from competitors under 47 CFR section 0.457(d)(2). Disclosure or publication of any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Midmark Corporation understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Thank you for your attention to this matter. Signatory William M. Stumpf OATS Manager D.L.S. Electronic Systems, Inc.

FCC ID: U399A429005 D.L.S. ELECTRONIC SYSTEMS, INC. 166 South Carter Street Genoa City, WI 53128 October 26, 2011 FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Gentlemen: We are submitting for Midmark Corporation, a 625 Scale hand control, Model Number: 9A429005, with an FCC ID: U399A429005 for Certification. This unit has been tested and complies to Part 15, Subpart C. If there are any questions in regard to this application, please call D.L.S. Electronic Systems, Inc. at (262) 279-0210. Enclosed you will find a copy of our test report with the information and results of tests that is required under Part 15, Section 15.249. Thank you for your assistance in this matter. Sincerely, William M. Stumpf DLS/js

Company: Midmark Corporation Model: 9A429005 Photo Description: Unit – Front Company: Midmark Corporation Model: 9A429005 Photo Description: Unit – Back Company: Midmark Corporation Model: 9A429005 Photo Description: Unit – Back with Battery Cover Removed

Wirel Remo FCCI less Remote ote Device) e Control andd Display forr 625-004 Sc ID: U399A4429005 IID Label (in inches) cale Equippeed Exam Tabble (Hand

Company: Midmark Corporation Model: 9A429005 Photo Description: Label Location

Company: Midmark Corporation Model: 9A429005 Photo Description: Inside Covers Company: Midmark Corporation Model: 9A429005 Photo Description: Back – Cover Removed Company: Midmark Corporation Model: 9A429005 Photo Description: Circuit Board – Side 1 Company: Midmark Corporation Model: 9A429005 Photo Description: Circuit Board – Side 2

166 South Carter, Genoa City, WI 53128 Page 1 of 25 Company: Midmark Corporation Model Tested: 9A4290005 Report Number: 17195 Project Number: 4699 i. Cover Page Code of Federal Regulations 47 Part 15 – Radio Frequency Devices Subpart C – Intentional Radiators Section 15.249 Operation within the bands 902 - 928 MHz, 2400 – 2483.5 MHz, 5725 – 5875 MHz, and 24.0 – 24.5 GHz THE FOLLOWING MEETS THE ABOVE TEST SPECIFICATION Formal Name: 625 Scale Hand Control Kind of Equipment: Transceiver FCC ID Number: U399A429005 Frequency Range: 2405 - 2480 MHz Test Configuration: Battery operated transceiver tested for intentional radiated emissions tabletop. Model Number(s): 9A4290005 Model(s) Tested: 9A4290005 Serial Number(s): N/A Date of Tests: August 29 - 30, 2011 Test Conducted For: Midmark Corporation 60 Vista Drive Versailles, OH 45380, USA NOTICE: “This test report relates only to the items tested and must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government”. Please see the "Description of Test Sample" page listed inside of this report. © Copyright 1983 - 2011 D.L.S. Electronic Systems, Inc. COPYRIGHT NOTICE This report must not be reproduced (except in full), without the approval of D.L.S. Electronic Systems, Inc. 166 South Carter, Genoa City, WI 53128 Page 2 of 25 Company: Midmark Corporation Model Tested: 9A4290005 Report Number: 17195 Project Number: 4699 ii. Signature Page SIGNATURE PAGE Tested By: Craig Brandt Test Engineer Reviewed By: William Stumpf OATS Manager Approved By: Brian Mattson General Manager 166 South Carter, Genoa City, WI 53128 Page 3 of 25 Company: Midmark Corporation Model Tested: 9A4290005 Report Number: 17195 Project Number: 4699 iii. Table of Contents Table of Contents i. Cover Page .......................................................................................................................................1 ii. Signature Page .................................................................................................................................2 iii. Table of Contents .............................................................................................................................3 iv. NVLAP Certificate of Accreditation ...............................................................................................4 1.0 Summary of Test Report ..................................................................................................................5 2.0 Introduction ......................................................................................................................................5 3.0 Test Facilities ...................................................................................................................................5 4.0 Description of Test Sample ..............................................................................................................6 5.0 Test Equipment ................................................................................................................................7 6.0 Test Arrangements ...........................................................................................................................8 7.0 Test Conditions ................................................................................................................................8 8.0 Modifications Made To EUT For Compliance ................................................................................8 9.0 Additional Descriptions ...................................................................................................................9 10.0 Results ..............................................................................................................................................9 11.0 Conclusion .......................................................................................................................................9 Appendix A – Test Photos .........................................................................................................................10 Appendix B – Measurement Data ..............................................................................................................14 1.0 Emission Bandwidth – 20 dB ................................................................................................... 14 2.0 Band Edge Measurement .......................................................................................................... 16 3.0 Duty Cycle Correction .............................................................................................................. 18 4.0 Field Strength of Emissions – Fundamental and Spurious ....................................................... 21 166 South Carter, Genoa City, WI 53128 Page 4 of 25 Company: Midmark Corporation Model Tested: 9A4290005 Report Number: 17195 Project Number: 4699 iv. NVLAP Certificate of Accreditation 166 South Carter, Genoa City, WI 53128 Page 5 of 25 Company: Midmark Corporation Model Tested: 9A4290005 Report Number: 17195 Project Number: 4699 1.0 Summary of Test Report It was determined that the Midmark Corporation 625 Scale Hand Control, Model 9A4290005, complies with the requirements of CFR 47 Part 15 Subpart C Section 15.249. Subpart C Section 15.249 Applicable Technical Requirements Tested: Section Description Procedure Note Compliant? 15.215(c) 20 dB Emission Bandwidth ANSI C63.4-2009 & ANSI C63.10-2009 1,2 Yes 15.205 Band Edge Measurement Near a Restricted Band ANSI C63.4-2009 & ANSI C63.10-2009 1,2 Yes 15.35(c) Duty Cycle Correction for Pulsed operation ANSI C63.4-2009 & ANSI C63.10-2009 1,2 Yes 15.249 & 15.205 / 15.209 Field Strength of Emissions Fundamental and Spurious ANSI C63.4-2009 & ANSI C63.10-2009 1,2 Yes Note 1: Tested in 3 orthogonal planes. Note 2: Radiated emission measurement. 2.0 Introduction On August 29 - 30, 2011 the 625 Scale Hand Control, Model 9A4290005, as provided from M…

Text truncated - open the document above for the full version.

Company: Midmark Corporation Model: 9A429005 Photo Description: Radiated – Position 1 Company: Midmark Corporation Model: 9A429005 Photo Description: Radiated – Position 2 Company: Midmark Corporation Model: 9A429005 Photo Description: Radiated – Position 3 Company: Midmark Corporation Model: 9A429005 Photo Description: Radiated – Above 1 GHz