U45-SR12316899Radio Control

X6 Operation and Instruction of 6-channel TX Warning NE-T007 2.4GHz transmitter is not a toy. To ensure your safety, children under 14 years old are strictly forbidden from operating it. It uses 8 AA NiMH batteries, any other inapplicable batteries are strictly forbidden. If you are not experienced in operating, we suggest you to learn it under the guidance of a well-experienced operator. Manufacturer and distributor are exempted from the responsibility of the product usage. We strongly suggest you to read this instruction carefully before operating. This product has passed authoritative International Certification: America FCC, Europe CE, ROHS, and Australia C-Tick and so on. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user`s. Compliance statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. 20110425 FCC INFORMATION AND WARNING There is no further notice if any modification of technical specifications. Nine Eagles exempts from liability of the damage results from possible mistakes in the manual. Statement: Catalogue Summarize 1 TX technical parameters 1 TX stand by status 3 Airplane Operation Instruction 4 Model number setup 5 Model type setup 6 User-defined mix setup 6 Channel reverse function 7 Dual Rate setup 8 Wing-mix parameter setup 8 Operation curve setup 10 Five subsection curve setup of throttle channel 11 Operation example 12 Gear speed setup 13 Memory trim setup 14 Flight timer setup 14 Helicopte Operation Instruction 15 Model number 15 Model type 16 Swashplate type 16 User-defined mix 17 Channel Reverse Function 18 CCPM Mix setup 19 Dual Rate Setup 19 Wing-mix parameter setup 20 Operation curve setup 21 Five subsection curve setup of throttle and PITCH channel 22 Operation example 23 Gyro sensitivity setup 25 Memory trim setup 26 Throttle hold setup 27 Flight timer setup 27 Other Function Instruction 28 Wireless Trainer function 28 Wireless copy function 30 Internal data copy function 30 3D switch safety protection 31 Throttle hold switch safety protection 31 Quick zero clearing and reset of timer 31 Binding with receiver 32 Switch from mode 1 to mode 2 32 Power saving control 32 Communication protocol choice 33 Control stick correction 33 Factory Reset 33 Wire Trainer function 34 Default model parameters 34 Reset for the first three model type (illustrated above) 35 Receiver Instruction 39 Transmitting power setup 28 1 www.NineEagle.com Operation and Instruction of 6-channel TX X6 Summarize The TX can control helicopter、airplane and glider, and adjust flight parameters. It employs advanced 2.4G DSSS (2.4G direct sequence spread spectrum) communication technology, and having long communication distance, excellent anti-interference and error correcting features. Friendly interface, easy to operate, concise and practical function, the whole external view is illustrated below. TX technical parameters 1. Battery type: AM3 AA 1.5V 8 cells 2. Working voltage range: 8.5-13V 3. Working current: 200-250mA 4. TX transmitting power: +14dBm Gyro/ Gear speed Trainer Switch D/R Switch (C) Confirm/ Enter into next step (D) Adjust SW(C) SW(E) SW(D) Hov.T/Trim.Flap 3D / Gear Throttle Hold/ Flap (A) Enter/ Recover to default (B) Return SW(A) SW(B) VR(A) Note: All the switchs and knob function differently in different model type, the function description before “/” is for helicopter while that after “/” is for airplane. For further convenient operation, we replace the four general buttons by A, B, C and D thereinafter, and the corresponding relationship is as follows: 2 www.NineEagle.com Operation and Instruction of 6-channel TX X6 A Enter/ Recover to default the button “A” is to enter into menu, and to recover to default in value adjustment setup. B Return the button “B” is to return to menu. C Confirm/Enter into next step the button “C” is to save current setting values and enter into next step. D Adjust the button “D” is to choose or adjust values. The TX employs high resolution and subsection LCD screen as user interface. All the parameters setup can be completed according to the above illustration. The whole menu is with layered structure, distinct levels and easy operation. The LCD display screen is divided into the following parts according to the menu design structure. a : main channel mix identifier b: channel identifier c: sub-channel mix identifier d: channel reversed setting identifier e: model number identifier f: value and time display For further convenient operation, we replace the six identifiers by a, b, c, d, e, and f thereinafter. The corresponding location is illustrated below: a b c d e f “END-P” represents Rudder Dual …

Text truncated - open the document above for the full version.

1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:27-Oct-2010Sheet of File:E:\产品资料\NE007遥控器\circuit\MyDesign1.ddbDrawn By: ANT 12MHz CE CSN SCK MOSI MISO IRQ B+ IRQ CSN CE SCK MOSI MISO VR CON1 BATTERY 1 2 CON2 Voltage Detect Microcontroller R5F21248SNFP VR Hover +3.3V U5 Voltage regulate U1 2.4GHz Radio Transceiver Low VR Steer VR Forward VR Left/Right Backward +3.3V+3.3V FM24C08B MEMORY HT1622B TX STATE Display BATTERY AA*4 AA*4 L/B R/R L/R R/B R/F R/L L/F L/L TX STATE SETUP +3.3V LCD LCD Driver +5V NE007 TX Functional Block Diagram RV:00 U4 Voltage regulate SS8050 LED LED +5.6V LED LED LED LED LCD BACK LIGHT SS8050 BUZZER LCD/KEY L/R HAND LCD/KEY EN/SW VR GYRO VR VR 3D VR U4 Voltage regulate +5V U4 Voltage regulate +5.6V PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 Shanghai Nine Eagles Electronic Technology Co., Ltd. Date:2010-11-29 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Shanghai Nine Eagles Electronic Technology Co., Ltd. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product: Radio Control (M/N: NE-T007, NE-T008, NE-T009, NE-T010, NE-T012, NE- T015, NE-T016, NE-T017, NE-T018, NE-T019, NE-T020) We affirm that between SIEMIC and Shanghai Nine Eagles Electronic Technology Co., Ltd., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Signature --------------------------------------------------- HUANG GUOCHUAN CEO Shanghai Nine Eagles Electronic Technology Co., Ltd. Room 1104, Huaxiang Building, No.80 Moling Road, Shanghai, 200070, China

General Appearance of the EUT

FCC ID Lable Location On EUT

Antenna

Shanghai Nine Eagles Electronic Technology Co.,Ltd. The description of 2.4G Radio Control This is a product of 2.4GHz wireless telecontrol, its working frequency is 2.4GHz. It is comprised of transmitter .The transmitter sends the telecontrol coding signal by high-frequency carrier ware. The receiver gets the high-frequency coding signal by the 2.4GHz direct sequence spread spectrum radio receiver circuit and drives the motor after coding ,.the transmitter uses 8 AA batteries. Frequencies(channels):24 20—2460MHz Modulation type:DSSS

1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:27-Oct-2010Sheet of File:E:\产品资料\NE007遥控器\circuit\MyDesign1.ddbDrawn By: C S 1 R D 3 W R 4 NC 49 D A T A 5 V S S 6 O S C I 7 V D D 8 V L C D 9 I R Q 1 0 BZ 11 BZ 13 NC 12 T1 14 T2 15 T3 16 COM0 17 COM1 18 NC 19 COM2 20 COM3 21 COM4 22 COM5 23 COM6 24 COM7 25 SEG0 26 S E G 1 2 7 S E G 2 2 8 S E G 3 2 9 S E G 4 3 0 S E G 5 3 1 S E G 6 3 2 N C 3 3 N C 3 4 N C 3 5 S E G 7 3 6 S E G 8 3 7 S E G 9 3 8 S E G 1 0 3 9 S E G 1 1 4 0 S E G 1 2 4 1 S E G 1 3 4 2 S E G 1 4 4 3 S E G 1 5 4 4 S E G 1 6 4 5 S E G 1 7 4 6 S E G 1 8 4 7 S E G 1 9 4 8 N C 2 NC 50 NC 51 NC 52 SEG20 53 SEG21 54 SEG22 55 SEG23 56 SEG24 57 SEG25 58 SEG26 59 SEG27 60 SEG28 61 SEG29 62 SEG30 63 SEG31 64 U1 HT1622 VDD 100 ohm R1 C1 104 1 2 3 4 5 CON VDD C O M 0 1 C O M 1 2 C O M 2 3 C O M 3 4 C O M 4 5 C O M 5 6 C O M 6 7 C O M 7 8 S E G 0 9 S E G 1 1 0 S E G 2 1 1 S E G 3 1 2 S E G 4 1 3 S E G 5 1 4 S E G 6 1 5 S E G 7 1 6 S E G 8 1 7 S E G 9 1 8 S E G 1 0 1 9 S E G 1 1 2 0 S E G 1 2 2 1 S E G 1 3 2 2 S E G 1 4 2 3 S E G 1 5 2 4 S E G 1 6 2 5 S E G 1 7 2 6 S E G 1 8 2 7 S E G 1 9 2 8 S E G 2 0 2 9 S E G 2 1 3 0 S E G 2 2 3 1 S E G 2 3 3 2 S E G 2 4 3 3 S E G 2 5 3 4 S E G 2 6 3 5 LCD NE007 TX LCD SCH NE007 Nine Eagles RV:00 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn 12345678 A B C D 8 7654321 D C B A Title NumberRevisionSize A3 Date:27-Oct-2010Sheet of File:E:\产品资料\NE007遥控器\circuit\MyDesign1.ddbDrawn By: R26 2.2K Q5 SS8050 BZ1 D4 1N4148 Charge Jack D3 1N5817 D1 1N5817 R7 100R 1 2 34 5 6 SW1 1 2 BAT1 R6 10K R3 10K R4 100R Q1 SS8050 Q2 AO3401 R55 3.3K R54 10K C23 104 TX POWER R21 3.3K C13 104 C12 104 R48 100R C20 104 R20 10K 123 GYRO VR 123 CH1 123 CH4 123 3D VR R44 100R R45 100R R46 100R R47 100R C16 104 C17 104 C18 104 C19 104 CH1 CH2 CH3 12345 LCD1 R19 10K R17 10K R18 10K R27 10K R16 10K SW4 SW5 SW2 SW3 R14 10K R35 10K R13 10K R15 10K SW8 SW9 L/R HAND SW6 SW7 VCC 5V R57 10K R56 10K R28 10K SW1 HOLD SW10 TRAIN SW9 D/R SW13SW14 SW15 R51 10K R49 10K R50 10K LED1 R34 10K EN1 R32 470R R29 470R R30 10K R31 10K C14 102 C15 102 3.3V 3.3V 123 CH2 123 CH3 R52 100R R53 100R C21 104 C22 104 CH4 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 1 2 3 45 6 7 8 CON5 VCC 3.3V IRQ IRQ TEST PORT 3.3V TX POWER 3.3V R33 10K SW11 3.3V VDD 3.3V R39 10K SW12 3D 3.3V A 0 1 A 1 2 A 2 3 G N D 4 S D A 5 S C L 6 W P 7 V C C 8 U2 FM24C08B DZ1 7.5V R8 10R C3 47uF/10V 6.8V LED4 LED5 LED6 R41 10K R40 4.7K Q6 SS8050 LED CTRL R42 68R R43 NC 6.8V C1 1uF R12 5.6R R1 1M R2 10K R5 100K NC 1 P3.5/SCL/SSCK 2 P3.3/SSI 3 P3.4/SDA/SCS 4 MODE 5 P4.3/XCIN 6 P4.4/XCOUT 7 RESET 8 XOUT/P4.7 9 VSS/AVSS 10 P4.6/XIN 11 VCC/AVCC 12 P2.7/TRD1 13 P 2 . 6 1 4 P 2 . 5 / T R C 1 1 5 P 2 . 4 / T R A 1 1 6 P 2 . 3 / T R D 0 1 7 P 2 . 2 / T R C 0 1 8 P 2 . 1 / T R B 0 1 9 P 2 . 0 / T R A 0 / T R C L K 2 0 P 1 . 7 / T R A I O / I N T 1 2 1 P 1 . 6 / C L K 0 2 2 P 1 . 5 / R X D 0 ( T R ) / I N T 1 2 3 P 1 . 4 / T X D 0 2 4 P 1 . 3 / A N 1 1 2 5 N C 2 6 P4.5/INT0 27 P6.6/INT2 28 P6.7/INT3 29 P1.2/AN10 30 P1.1/AN9 31 P1.0/AN8 32 P3.1/TRBO 33 P3.0/TRAO 34 P6.5/CLK1 35 P6.4 36 P6.3 37 P0.7/AN0 38 NC 39 N C 4 0 P 0 . 6 / A N 1 4 1 P 0 . 5 / A N 2 4 2 P 0 . 4 / A N 3 4 3 P 4 . 2 V R E F 4 4 P 6 . 0 / T R E O 4 5 P 6 . 2 4 6 P 6 . 1 4 7 P 0 . 3 / A N 4 4 8 P 0 . 2 / A N 5 4 9 P 0 . 1 / A N 6 5 0 P 0 . 0 / A N 7 5 1 P 3 . 7 / S S O 5 2 U1 R5F21248SNFP C10 220uF/16V C11 104 3.3V R38 NC R37 NC R36 0R D2 1N5817 LED7 1 2 3 U3 78L05 Q4 SS8050 R22 4.7K C4 47uF/10V 5V R23 470R LED8 LED9 Q3 SS8050 R9 470R LED2 R24 470R LED3 R25 470R 1/4W 1 2 3 U4 CJU1117-3.3V C5 104 R11 10R C7 47uF/10V C8 104 3.3V C6 100uF/16V C9 100uF/16V 1/2W 1W RF VDD MCU VDD TO-252 1 2 3 U5 CJP1117-3.3V TO-220 TO-92 NE007 TX SCH-00 RV:00 S JACK EARPHONE MODE3.3V RESET MODE RESET LED CTRL R10 100R C24 103 EARPHONE E N / S W LCD/KEY C2 47uF/10V L/L L/R L/B L/F R/F R/R R/B R/L NE007 Nine Eagles PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn 1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:27-Oct-2010Sheet of File:E:\产品资料\NE007遥控器\circuit\MyDesign1.ddbDrawn By: XTAL 1 NC 2 Vcc 3 NC 4 NC 5 Vbat 6 Vcc 7 Vbat 8 NC 9 RFbias 10 R F p 1 1 G N D 1 2 R F n 1 3 N C 1 4 N C 1 5 V c c 1 6 N C 1 7 N C 1 8 R E S V 1 9 N C 2 0 NC 21 NC 22 NC 23 SS 24 SCK 25 IRQ 26 MOSI 27 MISO 28 XOUT 29 PACTL 30 N C 3 1 N C 3 2 V i o 3 3 R S T 3 4 V d d 3 5 N C 3 6 L / D 3 7 V b a t 3 8 N C 3 9 V r e g 4 0 U1 CYRF6936 C5 2P L2 22nH L1 2.2nH C23 22U C7 103 C12 0.5 C8 103 VDD 1 23 4 X1 12MHz C9 103 C2 104 C4 474 C1 104 VDD VDD C11 6.8P C10 6.8P C13 NC C24 3.3P C14 100P C21 104 C15 100P C27 NC C25 6.8P C26 NC C18 10pF C22 104 C17 100P C16 100P C20 10P C19 10P L3 1.5NH VCTL 1 VRAMP 2 IN 3 VCC0 4 VCC1 5 OUT 6 G N D 7 U2 PA2423L VDD VDD VDD C3 0.47UF VDD ANT1 GND 1 /SS 2 SCK 3 MISO 4 IRQ 5 MOSI 6 RST 7 VDD 8 CON1 CON-4P-DUPVDD 1 1 2 2 3 3 4 4 CF2 1 1 2 2 3 3 4 4 CF1 C6 0.1uF NE007 TX RF SCH-00 RV:00 Nine Eagles NE007 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn

DONGGUAN EMTEK CO., LTD. REPORT NO: KAD101108010E FCC ID: U45-SR12316899 DATE: 11/29/2010 Page 1 of 28 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART B &C REQUIREMENT OF Radio Control MODEL No.: NE-T007, NE-T008, NE-T009, NE-T010, NE-T012, NE-T015, NE-T016, NE-T017, NE-T018, NE-T019, NE-T020 BRAND NAME: Nine Eagles FCC ID: U45-SR12316899 REPORT NO: KAD101108010E ISSUE DATE: November 29, 2010 Prepared for Shanghai Nine Eagles Electronic Technology Co., Ltd. Room 1104, Huaxiang Building, No.80 Moling Road, Shanghai, 200070, China Prepared by DONGGUAN EMTEK CO., LTD. No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 DONGGUAN EMTEK CO., LTD. REPORT NO: KAD101108010E FCC ID: U45-SR12316899 DATE: 11/29/2010 Page 2 of 28 VERIFICATION OF COMPLIANCE Applicant: Shanghai Nine Eagles Electronic Technology Co., Ltd. Room 1104, Huaxiang Building, No.80 Moling Road, Shanghai, 200070, China Product Description: Radio Control Brand Name: Nine Eagles Model Number: NE-T007, NE-T008, NE-T009, NE-T010, NE-T012, NE-T015, NE-T016, NE-T017, NE-T018, NE-T019, NE-T020 (Note: These samples are the same except appearance structure and color, so we prepare NE-T007 for EMC test.) File Number: KAD101108010E Date of Test: November 08, 2010 to November 29, 2010 We hereby certify that: The above equipment was tested by DONGGUAN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.249. The test results of this report relate only to the tested sample identified in this report. Approved By Sam Lv / Q.A. Manager DONGGUAN EMTEK CO., LTD. DONGGUAN EMTEK CO., LTD. REPORT NO: KAD101108010E FCC ID: U45-SR12316899 DATE: 11/29/2010 Page 3 of 28 Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION ........................................................................................................... 4 1.1 PRODUCT DESCRIPTION.......................................................................................................................... 4 1.2 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 5 1.3 TEST METHODOLOGY............................................................................................................................. 5 1.4 SPECIAL ACCESSORIES........................................................................................................................... 5 1.5 EQUIPMENT MODIFICATIONS................................................................................................................. 5 1.6 TEST FACILITY....................................................................................................................................... 6 2. SYSTEM TEST CONFIGURATION .............................................................................................. 7 2.1 EUT CONFIGURATION............................................................................................................................ 7 2.2 EUT EXERCISE....................................................................................................................................... 7 2.3 TEST PROCEDURE................................................................................................................................... 7 2.4 LIMITATION............................................................................................................................................ 7 2.5 CONFIGURATION OF TESTED SYSTEM.................................................................................................... 9 3. SUMMARY OF TEST RESULTS ................................................................................................. 10 4. DESCRIPTION OF TEST MODES............................................................................................... 10 5. RADIATED EMISSION TEST ......................................................................................................11 5.1 MEASUREMENT PROCEDURE................................................................................................................ 11 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................... 12 5.3 MEASUREMENT EQUIPMENT USED: ..................................................................................................... 13 5.4 OUT OF BAND RADIATED MEASUREMENT RESULT............................................................................. 13 5.5 RADIATED MEASUREMENT PHOTOS:.................................................................................................... 17 6. BAND EDGE .................................................................................................................................... 18 7. 20DB BANDWIDTH TEST ............................................................................................................20 7.1 MEASUREMENT PROCEDURE................................................................................................................ 20 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................... 20 7.3 MEASUREMENT EQUIPMENT USED: ..................................................................................................... 20 7.4 MEASUREMENT RESULTS:.................................................................................................................... 20 8. ANTENNA APPLICATION ........................................................................................................... 23 8.1 ANTENNA REQUIREMENT...............…

Text truncated - open the document above for the full version.

Radiated Emission Setup Photos