U5TTS-OR02RDBS-30Booster / 800MHz Band-Selective Bi-Directional Amp

Dual-Band Selective Repeater User’s Manual Beijing Telestone Technology Co., Ltd. 6F, Saiou Plaza, No. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Tel: 010-8367-0088#8089 Ve r. 0 2 Contents Contents ............................................................................................................................................2 1. Introduction...................................................................................................................................3 1.1. Product Features.................................................................................................................4 1.2. Front View..........................................................................................................................5 1.3. Bottom View ......................................................................................................................5 2. Specification .................................................................................................................................6 2.1. RF Specifications ...............................................................................................................6 2.2. Electrical Specifications.....................................................................................................6 2.3. Mechanical Specifications .................................................................................................6 2.4. Environmental Specifications ............................................................................................7 2.5. Monitor and Control...........................................................................................................7 3. Functional Description ..................................................................................................................8 3.2. Unit Descriptions .............................................................................................................9 4. Installation...................................................................................................................................10 4.1. Mounting..........................................................................................................................10 4.2. Connection .......................................................................................................................11 5. Operation and Maintenance ........................................................................................................12 5.1. WEB Interface..................................................................................................................12 5.1.1. Introduction...........................................................................................................12 5.1.2. Hardware and Software Requirements..................................................................12 5.1.3. Environment Configuration...................................................................................13 5.1.4. Basic Operation of WEB Interface........................................................................17 5.2. Keypad Interface..............................................................................................................23 Ve r. 0 3 1. Introduction Repeaters are used to fill out uncovered areas in cellular mobile systems, such as base station fringe areas, road tunnels, business and industrial buildings, etc. A repeater receives signals from a base station, amplifies and retransmits the signals to mobile stations. Also it receives, amplifies and retransmits signals in the opposite direction. Both directions are served simultaneously. To be able to receive and transmit signals in both directions, the repeater is connected to a donor antenna directed towards the base station and to a service antenna directed towards the area to be covered. Figure 1 Outdoor Application Figure 2 Indoor Application Ve r. 0 4 Longent dual-band selective repeaters with 2 adjustable bandwidths have filters that can be set to various bandwidths. This repeater type is suitable for the most carriers that need 2 band blocks support in 800 MHz cellular band. Figure 3 Longent Repeater 1.1. Product Features z Full Block A + A* or Block B + B* support z 2 programmable bandwidth, 0.5 MHz to 20 MHz for each z RF output power in user definable, 30 dBm max. z Web interface for monitoring and control z Integrated RF module Ve r. 0 5 1.2. Front View 1.3. Bottom View MSBSBS AC '5@ &217$&7 ,13<7 5☺'5@ &217$&7 2<73<7 32> (5 23(5 Ve r. 0 6 2. Specification 2.1. RF Specifications z Frequency Band 824 – 849 MHz, Uplink (Reverse Link) 869 – 894 MHz, Downlink (Forward Link) z Number of Bands 2 z Bandwidth 0.5 – 20 MHz, Programmable z Gain Adjustment Range 55 – 85 dB (1 dB Steps) z ALC > 30 dB z Absolute Group Delay < 10 μs (8 μs Typical) z Output Power +30 dBm, Total z Maximum Input Power +13 dBm (Non-destructive) z Out of Band Spurious Emission -30 dBm, max. z Selectivity < -20 dB @ +/-500 kHz out of band < -30 dB @ +/-700 kHz out of band < -50 dB @ +/-1 MHz out of band z Pass Band Ripple 6 dB (Typical 3 dB @ +/-1 MHz departure from the edge within the selected band) z Noise Figure at Max Gain 5 dB z VSWR < 1.5 : 1 2.2. Electrical Specifications z Power Supply Voltage (default) 115 V AC z Power Consumption, max 200 W z DC Output of PSU 27 V, 12 V 2.3. Mechanical Specifications z Dimensions (W×H×D) 410 mm × 520 mm × 234 mm z Weight 23 kg z RF Connector N-type female z Signal Connectors RJ45 Modular Jack DB25 female for 8 dry contact output DB9 female for 6 dry contact input Ve r. 0 7 2.4. Environmental Specifications z Temperature Range -25 to +55 °C z Humidity 95%, Relative z Casing Class IP53 2.5. Monitor and Control Monitor z Output Power z ALC Attenuation z DGC Attenuation z PA E n a b l e z PA temperature z VSWR z Band Setting z Used Gain Control z ALC level z DGC Attenuation z PA E n a b l e z Band Setting …

Text truncated - open the document above for the full version.

Beijing Telestone Technology Co., Ltd. FCC ID.: U5TTS-OR02RDBS-30 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Tel : 010-8367-0088#8089 / Tel : 010-8367-0088#8089 Federal Communications Commission Apr. 04 , 2007 Authorization and Evaluation Division ATTESTATION FCC ID: U5TTS-OR02RDBS-30 Product: 800 MHz Dual Band Selective Repeater Model: TS-OR02RDBS-30 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, Zhang YangJum / Engineer Beijing Telestone Technology Co., Ltd.

Beijing Telestone Technology Co., Ltd. FCC ID.: U5TTS-OR02RDBS-30 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Tel : 010-8367-0088#8089 / Tel : 010-8367-0088#8089 Beijing Telestone Technology Co., Ltd. 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Tel : 010-8367-0088#8089 Fax: 010-6372-0038 Federal Communications Commission Apr. 04 , 2007 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics, Block Diagram, Parts list, Opertional Description, Turn up Procedure. The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Zhang YangJum / Engineer Beijing Telestone Technology Co., Ltd.

RF_160, Issue 01 Declaration of Authorization We Name: Beijing Telestone Technology Co., Ltd. Address: 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China City: .................................................................. . Country: ........................................................................ . Declare that: Name: Beijing Telestone Technology Co., Ltd. Address: 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China City: .................................................................. . Country: ........................................................................... . is authorized to apply for Certification of the following product(s): Product description: CDMA 800 MHz Dual Band Selective Repeater ............... . Type designation: TS-OR02RDBS-30 ........................ . Trademark: Telestone ........................... on our behalf. Date: ...... 2007/04/04 ............ City: ...... Taipei .................. Name: ...... Zhang YongJum. ...... Signature:

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 April 18, 2007 RE: Beijing Telestone Technology Co., Ltd. FCC ID: U5TTS-OR02RDBS-30 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please review your Confidentiality Request letter. Are you sure that you want the Schematics to remain within public view? 2.) Please review the Block Diagram, Are you sure you wish to refer to “Longent” on this document? 3.) The Tune Up procedure says the RF Pout is +24dBm uplink and +30dBm downlink. This is lower that that reported on your Form 731. It appears that this device was not adjusted to maximum RF output power before testing was started. 4.) The RF Exposure estimation (MPE) shows an RF power lower than either the Form 731 or the Tune Up procedure. What is the “real” RF power? 5.) FYI: In my laboratory experience, spectrum analyzers usually make terrible broadband RF power meters. May I suggest that you use a “true” RF power meter whenever you are dealing with CDMA (or wider) emissions? 6.) Please review your uplink/downlink RF power test. The outputs for this CDMA emission seem to be overdriven. For example, see the uplink output plot and compare to the uplink input plot. The emission bandwidth is much, much wider than the input. Please review your data FYI: Whenever a CDMA signal does not match the emission profile of the input, something is wrong. In most cases, you will find that excess RF drive is causing a problem. 7.) Please provide specific RF power drive levels and output levels for your uplink/downlink plots in section 3.5. Please do not use a spectrum analyzer to insure greatest accuracy. 8.) The final page of the Manual quotes the two-part 15.19(a)(3) compliance statement. This is not appropriate for a Licensed radio transmitter. 9.) You have provided for me a Class A digital device report, but you show Class B compliance language. Please revise. 10.) You should provide stronger guidance to installers in Section 4 to make sure your antennas are 30cm away from all persons, and your RF safety recommendations are observed. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Beijing Telestone Technology Co., Ltd. FCC ID.: U5TTS-OR02RDBS-30 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Tel : 010-8367-0088#8089 / Tel : 010-8367-0088#8089 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Model No: TS-OR02RDBS-30 FCC ID: U5TTS-OR02RDBS-30 Trade name: Telestone "This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference."

Report No. 073L005-HPUSP04V01 Page: 1 of 3 Version: 1.0 RF Exposure Evaluation declaration Product Name : 800MHz Dual Band Selective Repeater Model No. : TS-OR02RDBS-30 FCC ID : U5TTS-OR02RDBS-30 Applicant : Beijing Telestone Technology Co., Ltd. Address : 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Date of Receipt : Nov. 09, 2006 Date of Declaration : Apr. 04, 2007 Report No. : 073L005-HPUSP04V01 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 073L005-HPUSP04V01 Page: 2 of 3 Version: 1.0 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 073L005-HPUSP04V01 Page: 3 of 3 Version: 1.0 1.3. Test Result of RF Exposure Evaluation Product : 800MHz Dual Band Selective Repeater Test Item : RF Exposure Evaluation Test Site : N/A Antenna Gain The peak gain of the antenna measured in fully anechoic chamber is 8dBi. Output Power Into Antenna & RF Exposure Evaluation Distance (8dBi): Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 30 cm (mW/cm2) Limit (mW/cm2) Result 836.4 205.5891 0.1147 0.5576 PASS 881.4 907.8205 0.5065 0.5876 PASS

Report No.: 073L005-HPUSP04V01 Page: 1 of 29 Version:1.0 Test Report Product Name : 800MHz Dual Band Selective Repeater Model No : TS-OR02RDBS-30 Applicant : Beijing Telestone Technology Co., Ltd. Address : 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Date of Receipt : 2007/02/26 Issued Date : 2007/04/04 Report No. : 073L005-HPUSP04V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government. Report No.: 073L005-HPUSP04V01 Page: 2 of 29 Version:1.0 Test Report Certification Issued Date: 2007/04/04 Report No.:073L005-HPUSP04V01 Test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government. Product Name : 800MHz Dual Band Selective Repeater Applicant : Beijing Telestone Technology Co., Ltd. Address : 6F, Saiou Plaza, NO. 5 Haiying Road, Fengtai Science Park, Beijing 100070, China Manufacturer : Beijing Telestone Technology Co., Ltd. Model No. : TS-OR02RDBS-30 Rated Voltage : AC 120V/60Hz Trade Name : Telestone Measurement Standard : FCC CFR Title 47 Part2 22 Measurement Reference : TIA/EIA 603-A Test Result : Complied Documented By : (Engineering Adm. Assistant / Eva Huang) Tested By : (Senior Engineer / Shine Hsu) Approved By : (Vice President / Gene Chang) Accredited by NIST (NVLAP) NVLAP Lab Code: 200533-0 Report No.: 073L005-HPUSP04V01 Page: 3 of 29 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................ 4 1.1. EUT Description ........................................................................................................... 4 1.2. Operational Description............................................................................................... 5 1.3. Configuration of tested System .................................................................................. 6 1.4. EUT Setup Procedures ................................................................................................ 6 1.5. Test Facility ...................................................................................................................7 1.6. Type of Emission .......................................................................................................... 7 2. RF Power Output .......................................................................................................... 8 2.1. Test Equipment............................................................................................................. 8 2.2. Test Setup .....................................................................................................................8 2.3. Limits ............................................................................................................................. 9 2.4. Test Procedure.............................................................................................................. 9 2.5. Test Specification ......................................................................................................... 9 2.6. Test Result of RF Power Output................................................................................ 10 3. Occupied Bandwidth.................................................................................................. 12 3.1. Test Equipment........................................................................................................... 12 3.2. Test Setup ................................................................................................................... 12 3.3. Test Procedure............................................................................................................ 13 3.4. Test Specification ....................................................................................................... 13 3.5. Test Result of Occupied Bandwidth ......................................................................... 14 4. Spurious Emission At Antenna Terminals ............................................................... 16 4.1. Test Equipment........................................................................................................... 16 4.2. Setup ...........................................................................................................................16 4.3. Limits ........................................................................................................................... 17 4.4. Test Procedure............................................................................................................ 17 4.5. Test Specification ....................................................................................................... 17 4.6. Spurious Emission At Antenna Terminals ............................................................... 18 5. Spurious Emission ..................................................................................................... 25 5.1. Test Equipment........................................................................................................... 25 5.2. Test Setup ................................................................................................................... 25 5.3. Limits ........................................................................................................................... 26 5.4. Test Procedure............................................................................................................ 26 5.5. Test Specification ......................................................................................................…

Text truncated - open the document above for the full version.

Test Mode ：CDMA2000 (800MHz) Description： Front View of Spurious Emission Test Test Mode ： CDMA2000 (800MHz) Description： Back View of Spurious Emission Test Test Mode ： CDMA2000 (800MHz) Description： Front View of Spurious Emission Test Test Mode ： CDMA2000 (800MHz) Description： Back View of Spurious Emission Test