U73-210780XXSecure Card Reader

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com DynaFlex and DynaFlex Pro Three-way Secure Card Reader Authenticators Installation and Operation Manual April 2020 Document Number: D998200382 REGISTERED TO ISO 9001:2015 DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual Page 2 of 11 (D998200382) Copyright © 2006 - 2020 MagTek, Inc. Printed in the United States of America INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE AND MAY CONTAIN TECHNICAL INACCURACIES OR GRAPHICAL DISCREPANCIES. CHANGES OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE UPDATED IN THE NEXT PUBLICATION RELEASE. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MAGTEK, INC. MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc. Magensa™ is a trademark of MagTek, Inc. AAMVA™ is a trademark of AAMVA. American Express® and EXPRESSPAY FROM AMERICAN EXPRESS® are registered trademarks of American Express Marketing & Development Corp. D-PAYMENT APPLICATION SPECIFICATION® is a registered trademark to Discover Financial Services CORPORATION MasterCard® is a registered trademark and PayPass™ and Tap & Go™ are trademarks of MasterCard International Incorporated. Visa® and Visa payWave® are registered trademarks of Visa International Service Association. ANSI®, the ANSI logo, and numerous other identifiers containing "ANSI" are registered trademarks, service marks, and accreditation marks of the American National Standards Institute (ANSI). ISO® is a registered trademark of the International Organization for Standardization. UL™ and the UL logo are trademarks of UL LLC. PCI Security Standards Council® is a registered trademark of the PCI Security Standards Council, LLC. EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MagTek is under license. Google Play™ store, Google Wallet™ payment service, and Android™ platform are trademarks of Google Inc. Apple Pay®, iPhone®, iPod®, Mac®, and OS X® are registered trademarks of Apple Inc., registered in the U.S. and other countries. iPad™ is a trademark of Apple. Inc. App Store SM is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used by Apple Inc. under license. Microsoft®, Windows®, and .NET® are registered trademarks of Microsoft Corporation. All other system names and product names are the property of their respective owners. DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual Page 3 of 11 (D998200382) Table 0-1 - Revisions Rev Number Date Notes April 28, 2020 DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual Page 4 of 11 (D998200382) LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTek’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from MagTek (the “Warranty Period”). This warranty shall apply only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by MagTek, in which event this warranty shall apply only to the first repurchaser). During the Warranty Period, should this product fail to conform to MagTek’s specifications, MagTek will, at its option, repair or replace this product at no additional charge except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either reconditioned or new. All replaced parts and products become the property of MagTek. This limited warranty does not include service to repair damage to the product resulting from accident, disaster, unreasonable use, misuse, abuse, negligence, or modification of the product not authorized by MagTek. MagTek reserves the right to examine the alleged defective goods to determine whether the warranty is applicable. Without limiting the generality of the foregoing, MagTek specifically disclaims any liability or warranty for goods resold in other than MagTek’s original packages, and for goods modified, altered, or treated without authorization by MagTek. Service may be obtained by delivering the product during the warranty period to MagTek (1710 Apollo Court, Seal Beach, CA 90740). If this product is delivered by mail or by an equivalent shipping carrier, the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or equivalent. MagTek will return the product, prepaid, via a three (3) day shipping service. A Return Material Authorization (“RMA”) number must accompany all returns. Buyers may obtain an RMA number by contacting MagTek Support Services at (888) 624-8350. EACH BUYER UNDERSTANDS THAT THIS MAGTEK PRODUCT IS OFFERED AS-IS. MAGTEK MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAGTEK DISCLAIMS ANY WARRANTY OF ANY OTHER KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF THIS PRODUCT DOES NOT CONFORM TO MAGTEK’S SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. MAGTEK’S LIABILITY, IF ANY, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO MAGTEK UNDER THIS AGREEMENT. IN NO EVENT WILL MAGTEK BE LIABLE TO THE BUYER FOR A…

Text truncated - open the document above for the full version.

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com DynaFlex and DynaFlex Pro Three-way Secure Card Reader Authenticators Installation and Operation Manual April 2020 Document Number: D998200382-10 REGISTERED TO ISO 9001:2015 DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual Page 2 of 94 (D998200382-10) Copyright © 2006 - 2020 MagTek, Inc. Printed in the United States of America INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE AND MAY CONTAIN TECHNICAL INACCURACIES OR GRAPHICAL DISCREPANCIES. CHANGES OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE UPDATED IN THE NEXT PUBLICATION RELEASE. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MAGTEK, INC. MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc. Magensa™ is a trademark of MagTek, Inc. AAMVA™ is a trademark of AAMVA. American Express® and EXPRESSPAY FROM AMERICAN EXPRESS® are registered trademarks of American Express Marketing & Development Corp. D-PAYMENT APPLICATION SPECIFICATION® is a registered trademark to Discover Financial Services CORPORATION MasterCard® is a registered trademark and PayPass™ and Tap & Go™ are trademarks of MasterCard International Incorporated. Visa® and Visa payWave® are registered trademarks of Visa International Service Association. ANSI®, the ANSI logo, and numerous other identifiers containing "ANSI" are registered trademarks, service marks, and accreditation marks of the American National Standards Institute (ANSI). ISO® is a registered trademark of the International Organization for Standardization. UL™ and the UL logo are trademarks of UL LLC. PCI Security Standards Council® is a registered trademark of the PCI Security Standards Council, LLC. EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MagTek is under license. Google Play™ store, Google Wallet™ payment service, and Android™ platform are trademarks of Google Inc. Apple Pay®, iPhone®, iPod®, Mac®, and OS X® are registered trademarks of Apple Inc., registered in the U.S. and other countries. iPad™ is a trademark of Apple. Inc. App Store SM is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used by Apple Inc. under license. Microsoft®, Windows®, and .NET® are registered trademarks of Microsoft Corporation. All other system names and product names are the property of their respective owners. DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual Page 3 of 94 (D998200382-10) Table 0-1 - Revisions Rev Number Date Notes 10 Initial Release DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual Page 4 of 94 (D998200382-10) LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTek’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from MagTek (the “Warranty Period”). This warranty shall apply only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by MagTek, in which event this warranty shall apply only to the first repurchaser). During the Warranty Period, should this product fail to conform to MagTek’s specifications, MagTek will, at its option, repair or replace this product at no additional charge except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either reconditioned or new. All replaced parts and products become the property of MagTek. This limited warranty does not include service to repair damage to the product resulting from accident, disaster, unreasonable use, misuse, abuse, negligence, or modification of the product not authorized by MagTek. MagTek reserves the right to examine the alleged defective goods to determine whether the warranty is applicable. Without limiting the generality of the foregoing, MagTek specifically disclaims any liability or warranty for goods resold in other than MagTek’s original packages, and for goods modified, altered, or treated without authorization by MagTek. Service may be obtained by delivering the product during the warranty period to MagTek (1710 Apollo Court, Seal Beach, CA 90740). If this product is delivered by mail or by an equivalent shipping carrier, the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or equivalent. MagTek will return the product, prepaid, via a three (3) day shipping service. A Return Material Authorization (“RMA”) number must accompany all returns. Buyers may obtain an RMA number by contacting MagTek Support Services at (888) 624-8350. EACH BUYER UNDERSTANDS THAT THIS MAGTEK PRODUCT IS OFFERED AS-IS. MAGTEK MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAGTEK DISCLAIMS ANY WARRANTY OF ANY OTHER KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF THIS PRODUCT DOES NOT CONFORM TO MAGTEK’S SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. MAGTEK’S LIABILITY, IF ANY, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO MAGTEK UNDER THIS AGREEMENT. IN NO EVENT WILL MAGTEK BE LIABLE TO…

Text truncated - open the document above for the full version.

6/1/2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Permanent Confidentiality To whom it may concern: In accordance with 47CFR Section 0.457 and Section 0.459 pertaining to confidential material, we hereby request to hold permanently confidential all information contained within the below identified exhibits/document categories submitted pursuant to radio equipment certification requirements for FCC ID: U73-210780XX 1. Block Diagram 2. Operational Description 3. Schematics 4. Parts List The above material contains trade secrets and proprietary information as specified by 47CFR 0.457(d) and technical data, which would customarily be guarded from competitors. The public disclosure of this information might be harmful to our company and provide unjustified benefits to our competitors. Sincerely, Hamid Manesh VP Quality Engineering MagTek Inc.

External Photos of the DynaFlex Family DynaFlex, Pro USB only DynaFlex, Pro USB/Bluetooth LE DynaFlex, Pro USB/802.11 DynaFlex, USB only DynaFlex, USB/Bluetooth LE Front back Side views

ID Label and Label Location DynaFlex Variant DynaFlex, USB only DynaFlex, Pro USB only DynaFlex, USB only FCCID: U73-210780XX IC: 23169-210780XX Label DynaFlex, Pro USB only FCCID: U73-210780XX IC: 23169-210780XX ID Label and Label Location DynaFlex Variant Label DynaFlex, Pro USB/Bluetooth LE DynaFlex, USB/Bluetooth LE DynaFlex, Pro USB/Bluetooth LE FCC ID: U73-210780XX CONTAINS FCC ID: QOQBGM13P IC: 23169-210780XX CONTAINS IC: 5123A-BGM13P DynaFlex, Pro USB/802.11 DynaFlex, Pro USB/802.11 FCC ID: U73-210780XX CONTAINS FCC ID: O7P-4343 IC: 23169-210780XX CONTAINS IC: 10147A-4343 DynaFlex, USB/Bluetooth LE FCC ID: U73-210780XX CONTAINS FCC ID: QOQBGM13P IC: 23169-210780XX CONTAINS IC: 5123A-BGM13P The Label will be placed on the back of the Dyna Flex as shown below. FCC,IC LabelFCC,IC Label Photo of labels

Internal Photos of DynaFlex DynaFlex MLB 13.56 MHz NFC IC Connection to Antenna Connection to Antenna Loop Antenna Contact Block for Chip Card reader. This is an OEM part. There is no components under the metal. The 8 Pins shown are part of the contact block. Communication board 802.11 802.11 module chip antenna Communication board Bluetooth LE Bluetooth LE module with shield removed Bluetooth LE module Bluetooth LE chip antenna

REPORT No.: DynaFlex MagTek, Inc., 1710 Apollo Court, Seal Beach, CA 90740 I p 562-546-6400 I f 562-546-6301 I 800-788-6835 I www.magtek.com RADIO FREQUENCY EXPOSURE REPORT NOTE: Any copying or replication of this report to or for any other person or entity, or use of our name or trademark shall be permitted only with our prior written permission. This report sets forth our findings solely with respect to the samples identified herein. RELEASE CONTROL RECORD REVISION REASON FOR CHANGE DATE 1.00 Initial Release 03/24/2020 Report No. 2 of 8 DynaFlex Table of Contents 1. DynaFlex Description ............................................................................................................................ 3 2. Purpose of this Document .................................................................................................................... 3 3. RF EXPOSURE Calculation ..................................................................................................................... 3 4. REPORT FINAL CONCLUSIONS ............................................................................................................... 8 Report No. 3 of 8 DynaFlex 1. DynaFlex Description DynaFlex is a series of hybrid secure card reader authenticators. It can be a hand- held device. The device features three interfaces to read a secure card: Magnetic Stripe, Smart Card and Contactless (NFC). The device is portable in nature and can connect to a host via USB, 802.11 or Bluetooth LE. There are five variations of DynaFlex listed in the chart below. DynaFlex, USB only DynaFlex, USB/Bluetooth LE DynaFlex, Pro USB only DynaFlex, Pro USB/Bluetooth LE DynaFlex, Pro USB/802.11 USB communication USB communication USB communication USB communication USB communication LCD LCD LCD Bluetooth LE Bluetooth LE 802.11 Rechargeable LIPO battery Rechargeable LIPO battery Rechargeable LIPO battery 2. Purpose of this Document SAR is defined as the rate at which energy is absorbed per unit mass in an object exposed to a radio frequency field. SAR distribution in a biological body is complicated, and this testing is usually performed by experimental and/or numerical modeling in qualified laboratories, and test is mandatory for all cellphones, but not for “portable” or “mobile” devices. Such portable devices are sometimes exempt from SAR lab testing if their output power does not exceed a country’s SAR exemption limits. This Document will prove that the DynaFlex output power does not exceed the limits in each country it will be sold. The Bluetooth LE and the 802.11 will be calculated separately since no variant will have both types of communication. where P is the power loss density, E is the electric field strength (V/m), J (퐴/푚 2 ) is the current density,  (푘푔/푚 3 ) is the density of the tissue or material, and  (푆/푚) is the conductivity of the material typically averaged over a pre-defined mass. 3. RF EXPOSURE Calculation Report No. 4 of 8 DynaFlex A worst-case scenario is being considered to determine the maximum power density as shown in equation 1. ( ) 2 2 4 cm mW R EIRP S  = Equation 1 Power density definition Where, S = Power density in ( 푚푊푐푚 2 ⁄ ) EIRP = Effective isotropically radiated power ( 푚푊 ) EIRP = Transmitter Power x Gain R = Distance to the center of the antenna radiation ( 푐푚 ) For the 802.11 antenna, the closest a user can be is 3.75 mm. For the BlueTooth LE the closest distance is 4.92 mm. Report No. 5 of 8 DynaFlex We shall determine the DynaFlex’s maximum power using 100% duty cycle conducted power at the 802.11 module’s antenna and the Bluetooth LE’s antenna. Power dBm) Antenna Gain (dBi) EIRP (dBm) EIRP (mW) 802.11 17 3.2 20.2 104.7 Bluetooth LE 8.8 1 9.8 9.5 Both the 802.11 and Bluetooth LE exceed the limits of FCC and IC. However, this was calculated using 100% duty cycle. A standard transaction consists of three phases of data transfer: 1) Host transaction initiation 2) Amount Approval by a customer 3) Customer’s signature capture collection The chart below shows the time (in ms) of actual data transfer for each step and the total time. Report No. 6 of 8 DynaFlex Step 1 time in ms Step 2 time in ms Step 3 time in ms 0.15 0.16 1 0.08 0.036 0.7 0.17 0.9 0.05 0.5 0.36 0.7 0.28 0.1 0.68 0.05 0.034 0.18 0.034 0.08 0.066 0.32 0.036 0.56 0.032 0.032 0.036 0.18 0.06 0.036 0.032 0.032 0.056 0.036 0.056 0.036 0.06 0.032 0.044 Total broadcat time for each step 2.488 0.196 5.302 Total Time (ms) 510 200 340 Total Transaction broadcast time 7.986 Total Transaction time 1050 total broadcast time/total time 0.00760571 0.76057143 % Report No. 7 of 8 DynaFlex The Duty Cycle of a transaction is the “Total Transaction broadcast time”/ “Total Transaction Time” which is calculated to be 0.76%. The adjusted power density calculated and shown below. EIRP (mW) Duty Cycle(%) EIRP (mW) (adjusted) 802.11 104.7 0.76 0.796 Bluetooth LE 9.5 0.76 0.072 4. LIMITS For FCC the limit is shown below from “RF EXPOSURE PROCEDURES AND EQUIPMENT AUTHORIZATION POLICIES FOR MOBILE AND PORTABLE DEVICES” appendix A: https://apps.fcc.gov/kdb/GetAttachment.html?id=f8IQgJxTTL5y0oRi0cpAuA%3D%3D&desc=447498 The Highlighted entry is the limit that our product needs to be below for FCC. For Canada (ISED) the limit is shown below from RSS-102 — Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands): Report No. 8 of 8 DynaFlex The Highlighted entry is the limit that our product needs to be below for ISED. 5. REPORT FINAL CONCLUSIONS DynaFlex was analyzed using the maximum power of the broadcasting module and minimum distance from the antenna to the user. The EIRP was then adjusted to take in account the duty cycle of the data transferred. The adjusted EIRP for 802.11 and Bluetooth LE fall below the requirements for FCC and ISED. See table below. EIRP (mW) (adjusted) FCC Limit (mW) ISED Limit (mW) 802.11 0.796 10 4 Bluetooth LE 0.072 10 4

This report contains a total of 42 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc. Magtek Incorporated TEST REPORT FOR Flexible/Modular Hybrid Secure Card Reader Model: DynaFlex Pro* *(See Appendix A for Manufacturer’s Declaration) Tested to The Following Standards: FCC Part 15 Subpart C Section(s) 15.207 & 15.225 (13.110-14.010 MHz) Report No.: 103582-16 Date of issue: April 10, 2020 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of testing for CKC Laboratories, Inc. We strive to create long-term, trust based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. Test Certificate # 803.01 Page 2 of 42 Report No.: 103582-16 TABLE OF CONTENTS Administrative Information ........................................................................................................................................... 3 Test Report Information ............................................................................................................................................ 3 Report Authorization ................................................................................................................................................. 3 Test Facility Information ............................................................................................................................................ 4 Software Versions ...................................................................................................................................................... 4 Site Registration & Accreditation Information .......................................................................................................... 4 Summary of Results ................................................................................................................................................... 5 Modifications During Testing ..................................................................................................................................... 5 Conditions During Testing.......................................................................................................................................... 5 Equipment Under Test ............................................................................................................................................... 6 General Product Information..................................................................................................................................... 6 FCC Part 15 Subpart C .................................................................................................................................................... 9 15.215(c) Occupied Bandwidth (20dB BW) ............................................................................................................... 9 15.225(a)-(c) Field Strength of Fundamental........................................................................................................... 12 15.225(e) Frequency Stability .................................................................................................................................. 17 15.225(d) Radiated Emissions & Band Edge ............................................................................................................ 19 15.207 AC Conducted Emissions .............................................................................................................................. 29 Appendix A: Manufacturer Declaration ....................................................................................................................... 40 Supplemental Information .......................................................................................................................................... 41 Measurement Uncertainty ...................................................................................................................................... 41 Emissions Test Details .............................................................................................................................................. 41 Page 3 of 42 Report No.: 103582-16 ADMINISTRATIVE INFORMATION Test Report Information REPORT PREPARED FOR: REPORT PREPARED BY: Magtek Incorporated 1710 Apollo Court Seal Beach, CA 90740 Darcy Thompson CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 REPRESENTATIVE: Kevin Gin Project Number: 103582 Customer Reference Number: 30009494 DATE OF EQUIPMENT RECEIPT: January 16, 2020 DATE(S) OF TESTING: January 16 – February 4, 2020 Report Authorization The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the equipment provided by the client, tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client’s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 4 of 42 Report No.: 103582-16 Test Facility Information Our laboratories are configured to effectively test a wide variety of product types. CKC utilizes first class test equipment, anechoic chambers, data acquisition and information services to create accurate, repeatable and affordable test results. TEST LOCATION(S): CKC Laboratories, Inc. 110 Olinda Place Brea, CA 92823 Software Versions CKC Laboratories Proprietary Software Version EMITest Emissions 5.03.12 S…

Text truncated - open the document above for the full version.

103582 Magtek