U8D-FBS100BCBLUETOOTH EMBEDDED MODULE

Blu ueto FBS ooth S100B Emb BC-SP bedd PP/HI Version 0.1 ded D Use 1 Home Mo er Gui FIRMT epage : http: Mail : co Te odule ide TECH Co ://www.firmt ntact@firmt el : +82-31-7 e o., Ltd. ech.co.kr ech.co.kr 719-4812 FBS100BC-SPP/HID User Guide Version 0.1 Revision History Page 2 / 28 Fax : +82-31-719-4834 Revision History Revision Date Change Descriptions Ver 0.1 2014-03-28 - Write a draft FBS100BC-SPP/HID User Guide Version 0.1 (C) Copyright FIRMTECH Co., Ltd. 2005 Page 3 / 28 (C) Copyright FIRMTECH Co., Ltd. 2005 All rights reserved The products and operation descriptions contained herein shall be protected by copyright law. Any part or whole of products or operation description shall not be copied, reproduced, translated, nor transformed into readable form by electronic device or machines, without prior consent in writing by FIRMTECH Co., Ltd. There might be some misprinting or technical faults in the products and operation description which are subject to change without prior notice. FBS100BC-SPP/HID User Guide Version 0.1 List of Content Page 4 / 28 List of Content Revision History .....................................................................................................................................................................2 (C) Copyright FIRMTECH Co., Ltd. 2005 ....................................................................................................................3 List of Content ........................................................................................................................................................................4 1 What is Bluetooth? ...........................................................................................................................................................5 1.1 Features of Bluetooth ........................................................................................................................................5 1.2 Operation of Bluetooth .....................................................................................................................................5 2 Product Overview .............................................................................................................................................................6 3 FBS100BC-SPP Components ........................................................................................................................................7 3.1 FBS100BC-SPP ........................................................................................................................................................7 3.2 PC Interface Kit (Option) ..................................................................................................................................7 4 FBS100BC-SPP Appearance ..........................................................................................................................................8 4.1 FBS100BC-SPP Dimension ...............................................................................................................................8 4.2 FBS100BC-SPP PIN Assign ...............................................................................................................................9 5 PC Interface Board (Jig Board) ............................................................................................................................... 10 6 Performance of FBS100BC-SPP ............................................................................................................................... 13 7 Current Consumption of FBS100BC-SPP ............................................................................................................ 14 8 FBS100BC-HID Components ..................................................................................................................................... 15 8.1 FBS100BC-HID ..................................................................................................................................................... 15 8.2 Smart HID Interface Kit (Option) .............................................................................................................. 15 9 FBS100BC-HID Appearance ...................................................................................................................................... 16 9.1 FBS100BC-HID Dimension ............................................................................................................................ 16 9.2 FBS100BC-HID PIN Assign ............................................................................................................................ 16 10 Smart HID Interface Board (Jig Board) ............................................................... ............................................. 19 11 Performance of FBS100BC-HID ............................................................................................................................ 20 12 Current Consumption of FBS100BC-HID ......................................................................................................... 21 13 FBS100BC-HID Input Data ...................................................................................................................................... 22 14 Approval Information ................................................................................................................................................ 27 FBS100BC 1 Wh 1.1 Fe       1.2 Op     C-SPP/HID Us hat is Blu eatures of Objectives o Consumptio Frequency i permission t - 2.400 – - 2.465 – Transmission Transmission Network Co simultaneou Reliability : through ad o peration Bluetooth op Masters are and “Page S If a Master information. Interconnec t Slave is corr ser Guide Ve uetooth f Bluetoo of Bluetooth n, High Relia b n Use: To U to use. 2.4835 GHz, 2.4835 GHz, n Rate : 1Mbp n Output : 1m onfiguration : s connection s To Guarant…

Text truncated - open the document above for the full version.

Firmtech Co., Ltd 807, 555, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea 462-726 (Sangdaewondong, Sunil Technopia) TEL No : +82-31-719-4812 / FAX No : +82-31-719-4834 April 18, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 LETTER OF AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize LTA Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization for FCC ID: U8D-FBS100BC including signing of all documents relating to these matters. Any and all acts carried out by LTA Co., Ltd., on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Firmtech co., Ltd LTA Co.,LTD. (Contact Person) Contact name: Jae-Ho Lee Position: Manager Phone:(82)31-323-6008 E-mail: [email protected] Sincerely, Jae Hoon Kim/Team Manager Firmtech Co., Ltd

Firmtech Co., Ltd 807, 555, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea 462-726 (Sangdaewondong, Sunil Technopia) TEL No : +82-31-719-4812 / FAX No : +82-31-719-4834 April 18, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : Firmtech co.,Ltd FCC ID : U8D– FBS100BC Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Firmtech co.,Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Firmtech co.,Ltd.. temporary confidentiality of commercially sensitive information prior to product release. The requested Confidential and Temporary Confidential exhibits are listed as follows: Exhibit Type File Name CONFIDENTIAL Schematics CONF APPENDIX U8D-FBS100BC SCH DIA.pdf Parts list CONF APPENDIX U8D- FBS100BC PL.pdf Block diagram CONF APPENDIX U8D- FBS100BC BLK DIA.pdf Operational description CONF APPENDIX U8D- FBS100BC OpDes.pdf SHORT-TERM CONFIDENTIAL External Photos SHORT-TERM CONF U8D- FBS100BC EXT Photo.pdf Internal Photos SHORT-TERM CONF U8D- FBS100BC INT Photo.pdf Test-Setup Photos SHORT-TERM CONF U8D- FBS100BC Test Photo.pdf User’s Manual SHORT-TERM CONF U8D- FBS100BC Manual.pdf The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Jae Hoon Kim/Team Manager Firmtech Co., Ltd

Firmtech Co., Ltd 807, 555, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea 462-726 (Sangdaewondong, Sunil Technopia) TEL No : +82-31-719-4812 / FAX No : +82-31-719-4834 April 18, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : Firmtech co.,Ltd FCC Application for FCC ID: U8D–FBS100BC To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely, Jae Hoon Kim/Team Manager Firmtech Co., Ltd

Firmtech Co., Ltd 807, 555, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea 462-726 (Sangdaewondong, Sunil Technopia) TEL No : +82-31-719-4812 / FAX No : +82-31-719-4834 FCC ID: U8D– FBS100BC Request for Single Modular approval Transmitter Module Characteristics  The module will be used to the ma nufactured product by Firmtech Co.,Ltd. No Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external photos. 2 Have buffered modulation/data inputs (if such inputs are provided) All inputs to the modules are buffered thought logic or microprocessor inputs. 3 Have it own power supply regulation Internal 3.3V power regulation. Refer to Module Block diagram 4 Meet the antenna requirements of Section 15.203 Refer to external photos. 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing Device was tested on a supplied developmen t platform for single modular approval. Refer to setup photos. 6 Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the out side of the device into which the module is installed must also display a label referring to the enclosed module Label is to be placed in Front of the EUT(FBS 100BC), and other label is to be placed in the User’s Guide. Refer to FCC ID label format. 7 The modular transmitter is manufactured so t hat the user cannot influence the operation of the transmitter that will operate outsi de of the scope of the regulations. Refer to “User’s Guide” 8 Address compliance with the Commission’s RF exposure limits in Sections 1.1310 and 2.1091. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). This device is categorically excluded from routine environmental because it operate at very low power level

FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 3 Upper Lower FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 3 Front Rear FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 3 ANTENNA- M/N: W5I-BF-RS06

FCC ID :U8D-FBS100BC Copyright Ⓒ 2014, LTA Co., Ltd. SAMPLE LABEL & LOCATION

FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 2 MainBoard – Front MainBoard – Rear FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 2 Total internal

FCC ID: U8D-FBS100BC ATTACHMENT * Standalone SAR test exclusion considerations - Min. transmitting frequency = 2402 MHz - Min. test separation distance = 5 mm -Max. Power with tune-up tolerance = 4.6 6 dBm = 2.92 mW (Measured power 4.16 dBm ± 0.5dB) Step 1) SAR Test exclusion thresholds for 100MHz to 6GHz at test separation distance ≤ 50 mm = Used [(max.power of channel, including tune-up torelance, mW)/(min. test separation distance, mm)] * [√f(GHz)] = [ 2.92 / 5 ] * [ √ 2.402 ] = 0.906 ≤ 3, for 1g SAR Thus, SAR for this device is not required. Step 2) SAR Test exclusion thresholds for 100MHz to 1500MHz at test separation distance > 50 mm = N/A [Threshold at 50mm in step 1) + (test separation distance - 50 mm) * (√f(MHz)/150] mW Step 3) SAR Test exclusion thresholds for 1500MHz to 6GHz at test separation distance > 50 mm = N/A [Threshold at 50mm in step 1) + (test separation distance - 50 mm) * 10] mW

Ref. No.: LR500111401B Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 36 243 Jubug-Ri,Yangji-Myeon, Yongin-Si, Gyeonggi-Do, Korea 449-822 Tel: +82-31-323-6008 Fax: +82-31-323-6010 http://www.ltalab.com Dates of Tests: April 01~ April 18, 2014 Test Report S/N: LR500111404A Test Site : LTA CO., LTD. CERTIFICATION OF COMPLIANCE FCC ID APPLICANT Equipment Class : Part 15 Spread Spectrum Transmitter (DSS) Manufacturing Description : Bluetooth Embedded Module Manufacturer : Firmtech Co., Ltd Model name : FBS100BC Test Device Serial No.: : Identical prototype Rule Part(s) : FCC Part 15.247 Subpart C; ANSI C-63.4-2003 Frequency Range : 2402 ~ 2480MHz RF power : Max 4.16 dBm – Conducted Data of issue : April 18, 2014 This test report is issued under the authority of: The test was supervised by: Jae-Ho Lee, Manager Young-Jin Lee, Test Engineer This test result only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the test laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. NVLAP LAB Code.: 200723-0 U8D-FBS100BC Firmtech Co., Ltd Ref. No.: LR500111401B Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 36 TABLE OF CONTENTS 1. GENERAL INFORMATION -------------------------------------------------------------------------- 2. INFORMATION ABOUT TEST ITEM ------------------------------------------------------------- 3. TEST REPORT --------------------------------------------------------------------------------------------- 3.1 SUMMARY OF TESTS ------------------------------------------------------------------------------ 3.2 INFORMATION ABOUT THE FHSS CHARACTERISTICS ------------------------------------- 3.3 TECHNICAL CHARACTERISTICS TEST ------------------------------------------------------- 3.3.1 CARRIER FREQUENCY SEPARATION ---------------------------------------------------- 3.3.2 NUMBER OF HOPPING FREQUENCIES -------------------------------------------------- 3.3.3 20 dB BANDWIDTH ---------------------------------------------------------------------------- 3.3.4 TIME OF OCCUPANCY (Dwell Time) ------------------------------------------------------- 3.3.5 TRANSMITTER OUTPUT POWER ---------------------------------------------------------- 3.3.6 BAND EDGE ------------------------------------------------------------------------------------- 3.3.7 CONDUCTED SPURIOUS EMISSIONS ----------------------------------------------------- 3.3.8 RADIATED SPURIOUS EMISSIONS ------------------------------------------------------- 3.3.8 AC CONDUCTED EMISSIONS ---------------------------------------------------------------- APPENDIX APPENDIX TEST EQUIPMENT USED FOR TESTS -------------------------------------------- 3 4 5 5 6 7 7 9 11 14 16 22 25 28 32 35 Ref. No.: LR500111401B Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 36 1. General information 1-1 Test Performed Company name : LTA Co., Ltd. Address : 243, Jubug-ri,Yangji-Myeon,Youngin-Si, Kyunggi-Do, Korea. 449-822 Web site : http://www .ltalab.com E-mail: [email protected] Telephone: +82-31-323-6008 Facsimile +82-31-323-6010 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competents of calibration and testing laboratory”. 1-2 Accredited agencies LTA Co., Ltd. is approved to perform EMC testing by the following agencies: Agency Country Accreditation No. Validity Reference NVLAP U.S.A 200723-0 2014-09-30 ECT accredited Lab. RRA KOREA KR0049 2015-03-06 EMC accredited Lab. FCC U.S.A 610755 2014-04-27 FCC filing FCC U.S.A 649054 2015-04-17 FCC CAB VCCI JAPAN R2133(10 m), C2307 2014-06-21 VCCI registration VCCI JAPAN T-2009 2016-12-23 VCCI registration VCCI JAPAN G-563 2015-05-28 VCCI registration ICCANADA IC57992015-06-21IC filing Ref. No.: LR500111401B Copyright ○ c 2014, LTA Co., Ltd. Page 4 of 36 2. Information about test item 2-1 Client Company name : Firmtech Co., Ltd Address : 807, 555, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea 462-726 (Sangdaewondong, Sunil Technopia) Telephone / Facsimile : +82-31-719-4812 / +82-31-719-4834 2-2 Equipment Under Test (EUT) Trade name : FBS100BC Model name : FBS100BC Serial number : Identical prototype Date of receipt : March 28, 2014 EUT condition : Pre-production, not damaged Antenna type : Chip antenna, Max Gain 1.59 dBi Frequency Range : 2402 ~ 2480MHz RF output power : Max. 4.16 dBm - Conducted Number of channels : 79 Channel spacing : 1MHz Channel Access Protocol : Frequency Hopping Spread Spectrum (FHSS) Power Source : DC 3.3V Firmware Version : V1.0.0 2-4 Tested frequency Bluetooth LOW MID HIGH Frequency (MHz) 2402 2441 2480 Ref. No.: LR500111401B Copyright ○ c 2014, LTA Co., Ltd. Page 5 of 36 3. Test Report 3.1 Summary of tests FCC Part Section(s) Parameter Limit Test Condition Status (note 1) 15.247(a) Carrier Frequency Separation > 25 kHz Conducted C 15.247(a) Number of Hopping Frequencies > 15 hops C 15.247(a) 20 dB Bandwidth 99% Bandwidth > 1.5 MHz C 15.247(a) Dwell Time < 0.4 seconds C 15.247(b) Transmitter Output Power < 250 mWatt C 15.247(d) Conducted Spurious emission > 20 dBc C 15.247(d) Band Edge > 20 dBc C 15.249 / 15.209 Field Strength of Harmonics < 54 dBuV (at 3m) Radiated C 15.109 Field Strength - C 15.207 /15.107 AC Conducted Emissions EN 55022 Line Conducted C 15.203 Antenna requirement - - C Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable Note 2: The data in this test report are traceable to the national or international standards. Note 1: Antenna Requirement  The Firmtech Co., Ltd FCC ID: U8D-FBS100BC unit complies with the requirement of §15.203. The antenna type is Chip antenna. Note 2: The sample was tested according to the following specification: FCC Parts 15.247; ANSI C-63.4-2003 Note 3: TEST METHODOLOGY The measurement procedure described in the American National Standard for Testing Unlicensed Wireless Devices(ANSI C63.10-2009) an…

Text truncated - open the document above for the full version.

FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 4 Radiate Emission (9kHz ~ 30MHz) FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 4 Radiate Emission (30MHz ~ 1GHz) FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 4 Radiate Emission (Above 1GHz) FCC ID: U8D-FBS100BC Copyright ○ c 2014, LTA Co., Ltd. Page 4 of 4 Conducted Emission