U8G-P1013PEPWAVE / peplink / PEPXIM Wireless Product

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name PISMO LABS TECHNOLOGY LIMITED Address A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Grantee Code U8G FCC ID U8G-P1013 Authorized Contact Name Antony Chong Contact Email [email protected] Contact Phone +852-2990-7600 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: June 03 2020 Print Name: Antony Chong Title: Director of Hardware Engineering *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Tel: +852 2990 7634; Fax: +852 3007 0588 Date: February 26, 2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: U8G- P1013 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short- term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Antony Chong [email protected]

FCC Modular Approval Request Rev 2.1 PISMO LABS TECHNOLOGY LIMITED TEL: +852-2990-7600 FAX: +852-3007-0588 Address: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Company name: PISMO LABS TECHNOLOGY LIMITED FCC ID: U8G-P1013 Dear Sir/Madam, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: U8G-P1013 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module has a shielding. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The module has a BLE transceiver that contains all the radio circuitry. The transceiver controls the data rate and modulation and buffers the transmitted and received data. The module must contain power supply regulation on the module. The module operates with an external power supply of 5.0V. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The module comply with antenna requirements. (PCB antenna) The module must demonstrate compliance in a stand-alone configuration. The module has firmware that allows it to operate in standalone mode. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The label is shown on module, please see the label view. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Specific rules, and operating conditions are exposed in User manual , in paragraph Electrical Architecture The module must comply with RF exposure requirements The module has been tested and test results compliance with RF exposure requirements. FCC Mo Name: odular Appr Antony Chong Title: Director of Hardware Engineering roval Requeest Rev 2.1 Date: May , 13 , 2020

PISMO LABS TECHNOLOGY LIMITED Date: February / 26 / 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: U8G-P1013 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Jing Song in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with PISMO LABS TECHNOLOGY LIMITED This authorization is valid until further written notice from the applicant. Name : Antony Chong Title: Director of Hardware Engineering Signature: On behalf of Company: PISMO LABS TECHNOLOGY LIMITED Telephone: +852 2990 7600

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 External Photos for HKES1704000967IT FCC ID: U8G-P1013 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 EUT Constructional Details

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 Internal Photos for HKES1704000967IT FCC ID: U8G-P1013 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 EUT Constructional Details Antenna

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096703 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: HKES1704000967IT Applicant: PISMO LABS TECHNOLOGY LIMITED Address of Applicant: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Manufacturer: PISMO LABS TECHNOLOGY LIMITED Address of Manufacturer: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Equipment Under Test (EUT): EUT Name: PEPWAVE / peplink / PEPXIM Wireless Product Model No.: BLE module; BLE module 2; Pismo013; BLE module - pcb antenna; BLE module 2 - pcb antenna; BT module 2 - pcb antenna; BT module - pcb antenna; BT module; BT module 2 ♣ ♣ Please refer to section 4 of this report which indicates which item was actually tested and which were electrically identical. FCC ID: U8G-P1013 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2017-04-28 Date of Test: 2019-05-11 to 2019-05-23 Date of Issue: 2019-07-12 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096703 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2019-07-12 Original Authorized for issue by: Jacky Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096703 Page: 3 of 6 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 G ENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 4 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 5 4.5 A BNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 5 5 SAR EVALUATION ................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure ....................................................................................................................... 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096703 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power supply: DC 3.3V(module power port) Power supply: DC 5.0V Test voltage: 5.0V Bluetooth Version: V 4.0 Frequency Range: 2402-2480MHz Channel Number: 40 Channel Spacing: 2MHz Antenna Type: PCB antenna Antenna Gain: 5dBi Declaration of EUT Family Grouping: According to the confirmation from the applicant, the above models are identical in circuitry design, PCB layout, electrical components used, internal wiring and functions, only different markets. Therefore only the model BLE module 2 - pcb antenna was tested in this report. 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096703 Page: 5 of 6 4.1 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designa…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096702 Page: 1 of 56 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: HKES1704000967IT Applicant: PISMO LABS TECHNOLOGY LIMITED Address of Applicant: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Manufacturer: PISMO LABS TECHNOLOGY LIMITED Address of Manufacturer: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Equipment Under Test (EUT): EUT Name: PEPWAVE / peplink / PEPXIM Wireless Product Model No.: BLE module; BLE module 2; Pismo013; BLE module - pcb antenna; BLE module 2 - pcb antenna; BT module 2 - pcb antenna; BT module - pcb antenna; BT module; BT module 2 ♣ ♣ Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. FCC ID: U8G-P1013 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2017-04-28 Date of Test: 2019-05-11 to 2019-05-23 Date of Issue: 2019-07-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096702 Page: 2 of 56 Revision Record Version Chapter Date Modifier Remark 01 2019-07-12 Original Authorized for issue by: Jacky Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096702 Page: 3 of 56 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(c) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at Mains Terminals (150kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 11.9.1.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Item no.: BLE module; BLE module 2; Pismo013; BLE module - pcb antenna; BLE module 2 - pcb antenna; BT module 2 - pcb antenna; BT module - pcb antenna; BT module; BT module 2 According to the confirmation from the applicant, the above models are identical in circuitry design, PCB layout, electrical components used, internal wiring and functions, only different markets. Therefore only the model BLE module 2 - pcb antenna was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HKES170400096702 Page: 4 of 56 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 D ETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.4 T EST LOCATION ............................................................................................................................. 7 4.5 TEST FACILITY ............................................................................................................................... 7 4.6 D EVIATION FROM STANDARDS ......................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................12 6.1 ANTENNA REQUIREMENT ................................................................................................................12 6.1.1 Test Requirement: ..................................................................................................................12 6.1.2 Conclusion ..............................................................................................................................12 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................13 7.1 CONDUCTED EMISSIONS AT MAINS TERMINALS (150KHZ-30MHZ) ......................................................13 7.1.1 E.U…

Text truncated - open the document above for the full version.