U8G-P1208LPEPWAVE / peplink Wireless Product

https://www.peplink.com 1 Copyright @ 2020 Peplink Peplink Balance User Manual Peplink Products: Flex module Mini Peplink Balance Firmware 8.0.2 March 2020 https://www.peplink.com 2 Copyright @ 2020 Peplink Table of Contents Introduction and Scope 7 Glossary 7 Product Features 9 Advanced Feature Summary 13 Drop-in Mode and LAN Bypass: Transparent Deployment 13 QoS: Clearer VoIP 13 Per-User Bandwidth Control 14 High Availability via VRRP 14 USB Modem and Android Tethering 15 Built-In Remote User VPN Support 15 LACP NIC Bonding 16 FlexModules Mini 17 Installation 22 Preparation 22 Constructing the Network 22 Basic Configuration 23 Connecting to the Web Admin Interface 23 Configuration with the Setup Wizard 24 Network Tab 28 WAN 28 Health Check Settings 37 Bandwidth Allowance Monitor Settings 40 Additional Public IP Settings 41 Dynamic DNS Settings 41 LAN 44 Network Settings 44 Network Settings (Common Settings) 48 Port Settings 54 VPN 55 SpeedFusion 55 https://www.peplink.com 3 Copyright @ 2020 Peplink IPsec VPN 61 Outbound Policy 65 Inbound Access 75 Servers 76 Services 76 DNS Settings 79 NAT Mappings 96 MediaFast 98 Setting Up MediaFast Content Caching 98 Viewing MediaFast Statistics 100 Prefetch Schedule 101 ContentHub 103 Configure a website to be published from the ContentHub 104 Configure an application to be published from the ContentHub 106 MDM Settings 108 Docker 109 Captive Portal 110 QoS 113 User Groups 113 Bandwidth Control 114 Application 115 Prioritization for Custom Application 115 DSL/Cable Optimization 117 Firewall 117 Access Rules 117 Intrusion Detection and DoS Prevention 121 Content Blocking 122 Application Blocking 123 Web Blocking 123 Customized Domains 124 Exempted User Groups 124 Exempted Subnets 124 URL Logging 124 OSPF & RIPv2 124 BGP 128 Remote User Access 130 https://www.peplink.com 4 Copyright @ 2020 Peplink L2TP with IPsec 130 OpenVPN 131 PPTP 131 Authentication Methods 132 Misc. Settings 133 High Availability 133 Certificate Manager 137 Service Forwarding 137 SMTP Forwarding 139 Web Proxy Forwarding 139 DNS Forwarding 140 Custom Service Forwarding 140 Service Passthrough 140 Grouped Networks 141 SIM Toolkit 142 AP Tab 144 AP 144 AP Controller 144 Wireless SSID 146 AP > Profiles 150 AP Controller Status 154 Info 154 Access Points (Usage) 156 Wireless SSID 158 Wireless Client 159 Nearby Device 160 Event Log 161 Toolbox 162 System Tab 163 System 163 Admin Security 163 Firmware 167 Web admin interface : install updates manually 168 The InControl method 169 Time 169 https://www.peplink.com 5 Copyright @ 2020 Peplink Schedule 170 Email Notification 171 Event Log 173 SNMP 173 InControl 176 Configuration 177 Feature Add-ons 178 Reboot 178 Tools 179 Ping 179 Traceroute 179 Wake-on-LAN 180 WAN Analysis 180 CLI (Command Line) Support 184 Status Tab 185 Status 185 Device 185 Active Sessions 187 Client List 189 WINS Clients 190 OSPF & RIPv2 190 MediaFast 190 SpeedFusion Status 191 Event Log 196 Device Event Log 197 IPsec Event Log 197 Bandwidth 198 Real-Time 198 Hourly 199 Daily 199 Monthly 202 Harrington Industrial Plastics 209 PLUSS 212 https://www.peplink.com 6 Copyright @ 2020 Peplink https://www.peplink.com 7 Copyright @ 2020 Peplink Introduction and Scope Peplink Balance routers provide link aggregation and load balancing across multiple WAN connections. We develop products and technologies that can help you build SD-WAN networks with unbreakable connection resilience, unmatched deployment flexibility, and intuitive ease of use. Our product and technology focus has always been on WAN virtualization and the intelligent use of multiple WAN links at the same time to increase reliability and bandwidth whilst reducing costs. We have two key WAN virtualization technologies, Intelligent load balancing for Internet access and SpeedFusion VPN Bonding for secure branch to branch connectivity. The Peplink MediaFast series are a range of routers capable of content caching. Designed with education and entertainment in mind, Mediafast downloads and accelerates video, iTunes iOS updates, app downloads, and other content for uninterrupted learning and fun anytime. The MediaFast can prefetch content during off-peak hours, saving connectivity costs and reducing network burden during busy times. 1 Glossary The following terms, acronyms, and abbreviations are frequently used in this manual: Term Definition 3G 3rd generation standards for wireless communications (e.g., HSDPA) 4G4th generation standards for wireless communications (e.g., LTE) DHCP Dynamic Host Configuration Protocol DNS Domain Name System EVDO Evolution-Data Optimized FQDN Fully Qualified Domain Name HSDPA High-Speed Downlink Packet Access HTTP Hyper-Text Transfer Protocol ICMP Internet Control Message Protocol https://www.peplink.com 8 Copyright @ 2020 Peplink IP Internet Protocol LAN Local Area Network MAC AddressMedia Access Control Address MTU Maximum Transmission Unit MSS Maximum Segment Size NAT Network Address Translation PPPoE Point to Point Protocol over Ethernet QoS Quality of Service SNMP Simple Network Management Protocol TCP Transmission Control Protocol UDP User Datagram Protocol VPN Virtual Private Network VRF Virtual Routing and Forwarding VRRP Virtual Router Redundancy Protocol WAN Wide Area Network WINS Windows Internet Name Service WLAN Wireless Local Area Network 210+Refers to Peplink Balance 210/310/380/580/710/1350/2500 380+ Refers to Peplink Balance 380/580/710/1350/2500 https://www.peplink.com 9 Copyright @ 2020 Peplink 2 Product Features Peplink Balance Series products enable all LAN users to share broadband Internet connections and provide advanced features to enhance Internet access. The following is a list of supported features: WAN Multiple public IP support (DHCP, PPPoE, static IP address) Static IP support for PPPoE 10/100/1000Mbps Ethernet connection in full/half duplex Built-in HSPA and EVDO cellular modems USB mobile connection (only one USB modem can be connected at a time) Drop-in mode…

Text truncated - open the document above for the full version.

https://www.peplink.com 126 Copyright @ 2020 Peplink OSPF Settings Area ID Determine the name of your Area ID to apply to this group. Machines linked to this group will send and receive related OSPF packets, while unlinked machines will ignore it. Link Type Choose the network type that this area will use. Authentication Choose an authentication method, if one is used, from this drop-down menu. Available options are MD5 and Text. Enter the authentication key next to the drop-down menu. Interfaces Determine which interfaces this area will use to listen to and deliver OSPF packets To access RIPv2 settings, click . https://www.peplink.com 127 Copyright @ 2020 Peplink RIPv2 Settings Authentication Choose an authentication method, if one is used, from this drop-down menu. Available options are MD5 and Text. Enter the authentication key next to the drop-down menu. Interfaces Determine which interfaces this group will use to listen to and deliver RIPv2 packets. OSPF & RIPv2 Route Advertisement PepVPN Route Isolation Isolate PepVPN peers from each other. Received PepVPN routes will not be forwarded to other PepVPN peers to reduce bandwidth consumption.. Network Advertising Networks to be advertised over OSPF & RIPv2. If no network is selected, all LAN / VLAN networks will be advertised by default. Static Route Advertising Enable this option to advertise LAN static routes over OSPF & RIPv2. Static routes that match the Excluded Networks table will not be advertised. https://www.peplink.com 128 Copyright @ 2020 Peplink 7.13 BGP Click the Network tab from the top bar, and then click the BGP item on the sidebar to configure BGP. Click "x" to delete a BGP profile Click "Add" to add a new BGP profile BGP Name This field is for specifying a name to represent this profile. Enable When this box is checked, this BGP profile will be enabled. Otherwise, it will be disabled. Interface The interface where BGP neighbor is located Autonomous System The Autonomous System Number (ASN) of this profile Neighbor BGP Neighbor's details IP address Neighbor's IP address Autonomous System Neighbor's ASN https://www.peplink.com 129 Copyright @ 2020 Peplink Multihop/TTL Time-to-live (TTL) of BGP packet. Leave it blank if BGP neighbor is directly connected, otherwise you must specify a TTL value. Accurately, this option should be used if the configured neighbor IP address does not match the selected Interface’s network subnets. TTL value must be between 2 to 255. Password Optional password for MD5 authentication of BGP sessions. AS-Path Prepending: AS path to be prepended to the routes received from this neighbor. The value must be a comma separated ASN. For example "64530,64531" will prepend "64530, 64531" to received routes. Hold Time Time in seconds to wait for a keepalive message from the neighbor before considering the BGP connection is staled. This value must be either 0 (infinite hold time) or between 3 and 65535 inclusively. Network Advertising Networks to be advertised to BGP neighbor. Static Route Advertising Enable this option to advertise LAN static routes. Static routes that match the Excluded Networks table will not be advertised. Advertise OSPF Route When this box is checked, all learnt OSPF routes will be advertised. Filter Mode This option selects the route import filter mode. https://www.peplink.com 130 Copyright @ 2020 Peplink None: all BGP routes will be accepted. Accept: Routes in "Restricted Networks" will be accepted, routes not in the list will be rejected. Reject: Routes in "Restricted Networks" will be rejected, routes not in the list will be accepted. Restricted Networks This specifies the network in the “route import” entry Exact Match: When this box is checked, only routes with the same Networks and Subnet Mask will be filtered. Otherwise, routes within the Networks and Subnet will be filtered. Export to other BGP Profile When this box is checked, routes learnt from this BGP profile will export to other BGP profiles. Export to OSPF When this box is checked, routes learnt from this BGP profile will export to the OSPF routing protocol. 7.14Remote User Access A remote-access VPN connection allows an individual user to connect to a private business network from a remote location using a laptop or desktop computer connected to the Internet. Networks routed by a Peplink router can be remotely accessed via OpenVPN, L2TP with IPsec or PPTP. To configure this feature, navigate to Network > Remote User Access and choose the required VPN type. 7.14.1 L2TP with IPsec L2TP with IPsec Remote User Access Settings https://www.peplink.com 131 Copyright @ 2020 Peplink Pre-shared Key Enter your pre shared key in the text field. Please note that remote devices will need this preshared key to access the Balance. Listen On This setting is for specifying the WAN IP addresses that allow remote user access. Disable Weak Ciphers Click the button to show and enable this option. When checked, weak ciphers such as 3DES will be disabled. Continue to configure the authentication method. 7.14.2 OpenVPN Select OpenVPN and continue to configure the authentication method. The OpenVPN Client profile can be downloaded from the Status > device page after the configuration has been saved. You have a choice between 2 different OpenVPN Client profiles. 8 "route all traffic" profile Using this profile, VPN clients will send all the traffic through the OpenVPN tunnel 9 "split tunnel" profile Using this profile, VPN clients will ONLY send those traffic designated to the untagged LAN and VLAN segment through the OpenVPN tunnel. 9.1.1 PPTP No additional configuration required. The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual private https://www.peplink.com 132 Copyright @ 2020 Peplink networks. PPTP has many well known security issues Continue to configure authentication method. 9.1.2 Authentication Methods Authentication Method Connect to Network Select the VLAN network for remote users to enable …

Text truncated - open the document above for the full version.

Pismo Labs Technology Limited A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Tel: +852 2990 7634 ; Fax: +852 3007 0588 Date: July 29, 2020 Federal Communicati ons Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: U8G-P1208L To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Antony Chong [email protected]

Reference No.: 200522C11 Page No. 1 / 21 CONSTRUCTION PHOTOS OF EUT Model: MC7455 Reference No.: 200522C11 Page No. 2 / 21 Reference No.: 200522C11 Page No. 3 / 21 Reference No.: 200522C11 Page No. 4 / 21 Reference No.: 200522C11 Page No. 5 / 21 Reference No.: 200522C11 Page No. 6 / 21 Model: LE910C4-NF Reference No.: 200522C11 Page No. 7 / 21 Reference No.: 200522C11 Page No. 8 / 21 Reference No.: 200522C11 Page No. 9 / 21 Reference No.: 200522C11 Page No. 10 / 21 Reference No.: 200522C11 Page No. 11 / 21 Model: LM960A18 Reference No.: 200522C11 Page No. 12 / 21 Reference No.: 200522C11 Page No. 13 / 21 Reference No.: 200522C11 Page No. 14 / 21 Reference No.: 200522C11 Page No. 15 / 21 Reference No.: 200522C11 Page No. 16 / 21 Model: EM7511 Reference No.: 200522C11 Page No. 17 / 21 Reference No.: 200522C11 Page No. 18 / 21 Reference No.: 200522C11 Page No. 19 / 21 Reference No.: 200522C11 Page No. 20 / 21 Reference No.: 200522C11 Page No. 21 / 21

Flex Module Mini Rear side Model: FlexModule Mini 1x LTEA Module Product Code:EXM-MINI-1GLTE-G Serial No.:1925-D1DB-DA5A Made in Taiwan M8 HW1 FCC ID: U8G-P1208L Contains FCC ID : RI7LM960 Contains IC: 51 31A-LM960 CAN ICES-3(A)/NMB-3(A) Model: FlexModule Mini 1x LTEA Module Product Code:EXM-MINI-1LTEA-R Serial No.:1925-D1DB-DA5A Made in Taiwan M8 HW1 FCC ID: U8G-P1208L Contains FCC ID : N7NEM75S Contains IC: 2417C-EM75S CAN ICES-3(A)/NMB-3(A) Model: FlexModule Mini 1x LTE Module Product Code:EXM-MINI-1LTE-US Serial No.:1925-D1DB-DA5A Made in Taiwan M8 HW1 FCC ID: U8G-P1208L Contains FCC ID : RI7LE910CXNF Contains IC: 5131A-LE910CXNF CAN ICES-3(A)/NMB-3(A) Model: FlexModule Mini 1x LTEA Module Product Code:EXM-MINI-1LTEA-W Serial No.:1925-D1DB-DA5A Made in Taiwan M8 HW1 FCC ID: U8G-P1208L Contains FCC ID : N7NMC7455 Contains IC: 2417C-MC7455 CAN ICES-3(A)/NMB-3(A)

Reference No.: 200522C11 Page No. 1 / 16 CONSTRUCTION PHOTOS OF EUT Model: MC7455 Reference No.: 200522C11 Page No. 2 / 16 Reference No.: 200522C11 Page No. 3 / 16 Reference No.: 200522C11 Page No. 4 / 16 Model: LE910C4-NF Reference No.: 200522C11 Page No. 5 / 16 Reference No.: 200522C11 Page No. 6 / 16 Reference No.: 200522C11 Page No. 7 / 16 Reference No.: 200522C11 Page No. 8 / 16 Model: LM960A18 Reference No.: 200522C11 Page No. 9 / 16 Reference No.: 200522C11 Page No. 10 / 16 Reference No.: 200522C11 Page No. 11 / 16 Reference No.: 200522C11 Page No. 12 / 16 Model: EM7511 Reference No.: 200522C11 Page No. 13 / 16 Reference No.: 200522C11 Page No. 14 / 16 Reference No.: 200522C11 Page No. 15 / 16 Reference No.: 200522C11 Page No. 16 / 16

Report No.: FC200522C11 Page No. 1 / 30 Report Format Version: 6.1.2 FCC Certification Test Report Report No.: FC200522C11 Test Model: Flex module Mini Series Model: FlexModule Mini 1x LTEA Module, FlexModule Mini 1x LTE Module, Pismo208L, EXM-MINI-1GLTE-G, EXM-MINI-1LTEA-R, EXM-MINI-1LTEA- W, EXM-MINI-1LTE-US, Peplink FlexModule Mini 1x LTEA (CAT 18) Module, Peplink FlexModule Mini 1x LTE Module, Peplink FlexModule Mini 1x LTEA (CAT 12) Module, Peplink FlexModule Mini 1x LTEA Module (Refer to item 3.1 for more details) FCC ID: U8G-P1208L Received Date: May 22, 2020 Test Date: Jun. 22 ~ Jun. 23, 2020 Issued Date: Jul. 01, 2020 Applicant: PISMO LABS TECHNOLOGY LIMITED Address: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 328930 / TW1050 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: FC200522C11 Page No. 2 / 30 Report Format Version: 6.1.2 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ......................................................................................................................... 4 2 Summary of Test Results......................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information ................................................................................................................................. 6 3.1 Description of EUT .............................................................................................................................. 6 3.2 Features of EUT .................................................................................................................................. 7 3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode ................................... 8 3.4 Test Program Used and Operation Descriptions ................................................................................. 8 3.5 Primary Clock Frequencies of Internal Source ................................................................................... 8 4 Configuration and Connections with EUT ............................................................................................. 9 4.1 Connection Diagram of EUT and Peripheral Devices ......................................................................... 9 4.2 Configuration of Peripheral Devices and Cable Connections ........................................................... 10 5 Conducted Emissions at Mains Ports ................................................................................................... 11 5.1 Limits .................................................................................................................................................. 11 5.2 Test Instruments ................................................................................................................................. 11 5.3 Test Arrangement .............................................................................................................................. 12 5.4 Test Results ....................................................................................................................................... 13 6 Radiated Emissions up to 1 GHz .......................................................................................................... 15 6.1 Limits ................................................................................................................................................. 15 6.2 Test Instruments ................................................................................................................................ 16 6.3 Test Arrangement .............................................................................................................................. 17 6.4 Test Results ....................................................................................................................................... 18 7 Radiated …

Text truncated - open the document above for the full version.

FCC ID: U8G-P1208L 1 Pictures of Test Arrangements 1.1 Conducted Emissions at Mains Ports FCC ID: U8G-P1208L 1.2 Radiated Emissions up to 1 GHz FCC ID: U8G-P1208L 1.3 Radiated Emissions above 1 GHz