U8G-P1213Pepwave Wireless Product

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2011 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. User Manual Pepwave Surf Indoor Series: Surf mini Surf On-The-Go Surf 400 Pepwave Surf DX Series: 400-DX Document Rev. 9.0.33 May 11 http://www.pepwave.com 2 Copyright © 2011 Pepwave User Manual Pepwave PolePoint Series Table of Contents 1 COPYRIGHT ............................................................................................................. 3 2 DISCLAIMER............................................................................................................. 3 3 PRODUCT DESCRIPTION ........................................................................................ 4 3.1 PRODUCT FEATURES ............................................................................................................. 4 3.2 HARDWARE SETUP ................................................................................................................ 5 3.3 LED DESCRIPTION ................................................................................................................ 6 4 USING THE PEPWAVE DEVICES ............................................................................ 9 4.1 PRE-CONFIGURING PC SETUP ............................................................................................... 9 4.2 FIRST TIME SETUP .............................................................................................................. 10 5 CPE SETTINGS DETAILS ...................................................................................... 14 5.1 IP SETTINGS ....................................................................................................................... 14 5.2 RADIO SETTINGS ................................................................................................................. 15 5.3 WIRELESS SETTINGS ........................................................................................................... 16 5.4 ROAMING SETTINGS: ........................................................................................................... 18 5.5 WIRELESS IP SETTINGS ....................................................................................................... 19 5.6 RESTORE AND REBOOT ....................................................................................................... 20 5.7 INTEGRATED WI-FI ACCESS POINT CONFIGURATION ............................................................. 21 6 PORT FORWARDING ............................................................................................. 24 7 QOS ................................................................................................................ 26 8 FIRMWARE UPGRADE .......................................................................................... 27 9 DEBUG AND SYSTEM INFORMATION ................................................................. 28 10 RESTORE TO DEFAULT SETTINGS ..................................................................... 30 10.1 SURF INDOOR SERIES ......................................................................................................... 30 10.2 SURF DX SERIES ................................................................................................................ 30 APPENDIX ................................................................................................................ 31 http://www.pepwave.com 3 Copyright © 2011 Pepwave User Manual Pepwave PolePoint Series 1 Copyright Copyright © 2011 by Pepwave Ltd. The content of this documentation may not be reproduced in any part or as a whole without the prior written permission of Pepwave Ltd. 2 Disclaimer Pepwave does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent right nor the patent rights of others. Pepwave further reserves the right to make changes in any products described herein without notice. This documentation is subject to change without notice. http://www.pepwave.com 4 Copyright © 2011 Pepwave User Manual Pepwave PolePoint Series 3 Product Description 3.1 Product Features  Signal strength LED for showing the current signal strength  Always-on, integrated Wi-Fi access point  WPA/WPA2-Personal and WPA/WPA2-Enterprise security support  Wi-Fi Multimedia (WMM) support  Built-in DHCP server and NAT routing to manage client devices  Customizable, built-in web portal for simple web-based configuration Surf 400 Surf 400-DX Surf mini / Surf On-The-Go http://www.pepwave.com 5 Copyright © 2011 Pepwave User Manual Pepwave PolePoint Series 3.2 Hardware Setup 3.2.1 Surf mini / Surf On-The-Go Series 1. Attach the provided antenna to the right most antenna connector 2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable. 3. Connect the end of the included power adapter to the power socket on Pepwave Surf mini. 4. Power on the power adaptor. 3.2.2 Surf 400 Series 1. Attach the provided antenna to the left most antenna connector 2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable. 3. Connect the end of the included power adapter to the power socket (labeled “DC 12V”) on Pepwave Surf. 4. Power on the power adaptor. 3.2.3 Surf DX Series Please follow the installation guide to set up the Pepwave Surf 400-DX. http://www.pepwave.com 6 Copyright © 2011 Pepwave User Manual Pepwave PolePoint Series 3.3 LED Description 3.3.1 Surf mini / Surf On-The-Go Series LED Color Status Description PWR Green On Power is on Off Power is off RDY Green On Device is booted Off Device is not booted ENET Green On Ethernet is connected Blinking Sending/Receiving data Off Ethernet is not connected Green On Associ…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

(Fig.1) FCC ID: U8G-P1213 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. LABEL

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8

Report No.: SA110328E01 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110328E01 MODEL NO.: Pismo 315, Surf series, AP series, Mesh Connector series, MAX series FCC ID: U8G-P1213 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Pismo Labs Technology Limited ADDRESS: 1703A, 17/F, Park Building 476 Castle Peak Road, Cheung Sha Wan, Kowloon, Hong Kong ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan Report No.: SA110328E01 Report Format Version 4.0.0 2 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110328E01 Original release May 09, 2011 Report No.: SA110328E01 Report Format Version 4.0.0 3 1. CERTIFICATION PRODUCT: Pepwave Wireless Product BRAND NAME: Pepwave MODEL NO.: Pismo 315, Surf series, AP series, Mesh Connector series, MAX series TEST SAMPLE: R&D SAMPLE APPLICANT: Pismo Labs Technology Limited STANDARDS: IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: May 09, 2011 ( Claire Kuan, Specialist ) APPROVED BY : , DATE: May 09, 2011 ( May Chen, Deputy Manager ) Report No.: SA110328E01 Report Format Version 4.0.0 4 1. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 3. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110328E01 Report Format Version 4.0.0 5 4. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 281.8 3 20 0.112 1.00 For 15.247(5GHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745-5825 173.8 6 20 0.138 1.00 For 15.407(5GHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5180-5240 46.8 5.5 20 0.033 1.00 For 3G Card: E169u FREQUENCY BAND (MHz) MAX POWER (mW) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 836.5 1210.598 20 0.241 0.5577 NOTE: Limit of power density = 836.5 (MHz) / 1500 = 0.5577 For 3G Card: DWM-156 FREQUENCY BAND (MHz) MAX POWER (mW) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 1880 826.038 20 0.164 1.00 For 3G Card: DWM-152 FREQUENCY BAND (MHz) MAX POWER (mW) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 824.7 255.270 20 0.051 0.5498 NOTE: Limit of power density = 824.7 (MHz) / 1500 = 0.5498 Report No.: SA110328E01 Report Format Version 4.0.0 6 CONCLUSION: Both of the WLAN and 3G card can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density For 2.4GHz with 3G Card: Therefore, the worst-case situation is 0.112 / 1 + 0.241 / 0.5577= 0.544, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. For 5GHz with 3G Card: Therefore, the worst-case situation is 0.138 / 1 + 0.241 / 0.5577= 0.570, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. --- END ---

Report No.: RF110328E01 1 Report Format Version 4.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF110328E01 MODEL NO.: Pismo 315, Surf series, AP series, Mesh Connector series, MAX series FCC ID: U8G-P1213 RECEIVED: Mar. 28, 2011 TESTED: Apr. 08 to 20, 2011 ISSUED: May 09, 2011 APPLICANT: Pismo Labs Technology Limited ADDRESS: 1703A, 17/F, Park Building 476 Castle Peak Road, Cheung Sha Wan, Kowloon, Hong Kong ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 118 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110328E01 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD........................................................................................5 1. CERTIFICATION....................................................................................................6 2. SUMMARY OF TEST RESULTS............................................................................7 2.1 MEASUREMENT UNCERTAINTY..........................................................................9 3. GENERAL INFORMATION...................................................................................10 3.1 GENERAL DESCRIPTION OF EUT.....................................................................10 3.2 DESCRIPTION OF TEST MODES.......................................................................13 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........................14 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................17 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................18 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................19 4. TEST TYPES AND RESULTS (802.11b & g, 2400 ~ 2483.5MHz Band)...............20 4.1 CONDUCTED EMISSION MEASUREMENT........................................................20 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................20 4.1.2 TEST INSTRUMENTS..........................................................................................20 4.1.3 TEST PROCEDURES..........................................................................................21 4.1.4 DEVIATION FROM TEST STANDARD.................................................................21 4.1.5 TEST SETUP.......................................................................................................22 4.1.6 EUT OPERATING CONDITIONS.........................................................................22 4.1.7 TEST RESULTS...................................................................................................23 4.2 RADIATED EMISSION MEASUREMENT.............................................................25 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................25 4.2.2 TEST INSTRUMENTS..........................................................................................26 4.2.3 TEST PROCEDURES..........................................................................................28 4.2.4 DEVIATION FROM TEST STANDARD.................................................................28 4.2.5 TEST SETUP.......................................................................................................29 4.2.6 EUT OPERATING CONDITIONS.........................................................................29 4.2.7 TEST RESULTS...................................................................................................30 4.3 6dB BANDWIDTH MEASUREMENT....................................................................59 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..................................................59 4.3.2 TEST INSTRUMENTS..........................................................................................59 4.3.3 TEST PROCEDURE.............................................................................................59 4.3.4 DEVIATION FROM TEST STANDARD.................................................................59 4.3.5 TEST SETUP.......................................................................................................59 4.3.6 EUT OPERATING CONDITIONS.........................................................................59 4.3.7 TEST RESULTS...................................................................................................60 4.4 MAXIMUM PEAK OUTPUT POWER....................................................................64 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....................64 4.4.2 INSTRUMENTS....................................................................................................64 4.4.3 TEST PROCEDURES..........................................................................................64 Report No.: RF110328E01 3 Report Format Version 4.0.0 4.4.4 DEVIATION FROM TEST STANDARD.................................................................64 4.4.5 TEST SETUP.......................................................................................................64 4.4.6 EUT OPERATING CONDITIONS.........................................................................64 4.4.7 TEST RESULTS...........................................................................…

Text truncated - open the document above for the full version.

Report No.: RF110328E01-1 1 Report Format Version 4.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF110328E01-1 MODEL NO.: Pismo 315, Surf series, AP series, Mesh Connector series, MAX series FCC ID: U8G-P1213 RECEIVED: Mar. 28, 2011 TESTED: Apr. 12 to 20, 2011 ISSUED: May 09, 2011 APPLICANT: Pismo Labs Technology Limited ADDRESS: 1703A, 17/F, Park Building 476 Castle Peak Road, Cheung Sha Wan, Kowloon, Hong Kong ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 78 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110328E01-1 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1 CERTIFICATION....................................................................................................5 2 SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3 GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................11 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:.......................12 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................14 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................15 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................16 4. TEST TYPES AND RESULTS..............................................................................17 4.1 CONDUCTED EMISSION MEASUREMENT........................................................17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................17 4.1.2 TEST INSTRUMENTS..........................................................................................17 4.1.3 TEST PROCEDURES..........................................................................................18 4.1.4 DEVIATION FROM TEST STANDARD.................................................................18 4.1.5 TEST SETUP.......................................................................................................19 4.1.6 EUT OPERATING CONDITIONS.........................................................................19 4.1.7 TEST RESULTS...................................................................................................20 4.2 RADIATED EMISSION MEASUREMENT.............................................................22 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................22 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS..........23 4.2.3 TEST INSTRUMENTS..........................................................................................24 4.2.4 TEST PROCEDURES..........................................................................................26 4.2.5 DEVIATION FROM TEST STANDARD.................................................................26 4.2.6 TEST SETUP.......................................................................................................27 4.2.7 EUT OPERATING CONDITION............................................................................27 4.2.8 TEST RESULTS...................................................................................................28 4.3 OUTPUT TRANSMIT POWER MEASUREMENT.................................................49 4.3.1 LIMITS OF OUTPUT TRANSMIT POWER MEASUREMENT...............................49 4.3.2 TEST INSTRUMENTS..........................................................................................49 4.3.3 TEST PROCEDURE.............................................................................................50 4.3.4 DEVIATION FROM TEST STANDARD.................................................................50 4.3.5 TEST SETUP.......................................................................................................50 4.3.6 EUT OPERATING CONDITIONS.........................................................................50 4.3.7 TEST RESULTS...................................................................................................51 4.4 PEAK POWER EXCURSION MEASUREMENT...................................................57 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT.................................57 4.4.2 TEST INSTRUMENTS..........................................................................................57 Report No.: RF110328E01-1 3 Report Format Version 4.0.0 4.4.3 TEST PROCEDURE.............................................................................................57 4.4.4 DEVIATION FROM TEST STANDARD.................................................................57 4.4.5 TEST SETUP.......................................................................................................58 4.4.6 EUT OPERATING CONDITIONS.........................................................................58 4.4.7 TEST RE…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST