U8G-P1710Pepwave / Peplink / Pismo Wireless Product

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2012 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. Pepwave MAX Series: MAX 600 / 700 / HD2 / BR1 Pepwave MAX Firmware 5.4 September 2012 http://www.pepwave.com 2 Copyright @ 2012 Pepwave Table of Contents 1 INTRODUCTION AND SCOPE ............................................................................................. 5 2 GLOSSARY........................................................................................................................ 6 3 PRODUCT FEATURES ........................................................................................................ 7 3.1 SUPPORTED NETWORK FEATURES ............................................................................................................. 7 3.2 OTHER SUPPORTED FEATURES .................................................................................................................. 8 4 PEPWAVE MAX MOBILE ROUTER OVERVIEW .................................................................... 9 4.1 MAX 600 ............................................................................................................................................ 9 4.2 MAX 700 .......................................................................................................................................... 11 4.3 MAX HD2 ......................................................................................................................................... 13 4.4 MAX BR1 .......................................................................................................................................... 14 5 INSTALLATION ............................................................................................................... 16 5.1 PREPARATION...................................................................................................................................... 16 5.2 CONSTRUCTING THE NETWORK ............................................................................................................... 16 5.3 CONFIGURING THE NETWORK ENVIRONMENT ............................................................................................ 17 5.4 MOUNTING THE UNIT ........................................................................................................................... 17 6 CONNECTING TO WEB ADMIN INTERFACE ...................................................................... 19 7 CONFIGURATION OF LAN INTERFACE(S) ......................................................................... 21 7.1 BASIC SETTINGS ................................................................................................................................... 21 7.2 WI-FI AP ........................................................................................................................................... 25 8 CONFIGURATION OF WAN INTERFACE(S) ........................................................................ 27 8.1 ETHERNET WAN ................................................................................................................................. 28 8.2 CELLULAR 1 / CELLULAR 2 ..................................................................................................................... 37 8.3 WI-FI WAN ....................................................................................................................................... 40 8.4 WAN HEALTH CHECK ........................................................................................................................... 45 8.5 BANDWIDTH ALLOWANCE MONITOR ....................................................................................................... 49 9 WI-FI SETTINGS .............................................................................................................. 50 10 BANDWIDTH BONDING SPEEDFUSION TM ........................................................................ 53 10.1 SPEEDFUSION TM .................................................................................................................................. 54 10.2 LINK FAILURE DETECTION ...................................................................................................................... 58 10.3 PEPWAVE MAX BEHIND NAT ROUTER .................................................................................................... 59 10.4 SPEEDFUSION TM STATUS ....................................................................................................................... 60 11 IPSEC VPN ...................................................................................................................... 61 11.1 IPSEC VPN SETTINGS ............................................................................................................................ 61 11.2 IPSEC STATUS ...................................................................................................................................... 64 12 MANAGEMENT OF OUTBOUND TRAFFIC TO WAN .......................................................... 64 http://www.pepwave.com 3 Copyright @ 2012 Pepwave 12.1 OUTBOUND POLICY .............................................................................................................................. 64 12.2 CUSTOM RULES FOR OUTBOUND POLICY .................................................................................................. 65 13 PORT FORWARDING ...................................................................................................... 75 13.1 PORT FORWARDING SERVICE .................................................................................................................. 75 13.2 UPNP / NAT-PMP SETTINGS ........................................…

Text truncated - open the document above for the full version.

Report No.: 120730E04 1 of 13 CONSTRUCTION PHOTOS OF EUT Report No.: 120730E04 2 of 13 Model No.: 9E.XCI15.001 Report No.: 120730E04 3 of 13 Model No.: GPS-01 Report No.: 120730E04 4 of 13 Report No.: 120730E04 5 of 13 Model No.: SPDA24700/2700 Report No.: 120730E04 6 of 13 Report No.: 120730E04 7 of 13

(Fig.1) FCC ID: U8G-P1710 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Back Side : LABEL HRER

Report No.: 120730E04 1 of 6 CONSTRUCTION PHOTOS OF EUT Report No.: 120730E04 2 of 6 Report No.: 120730E04 3 of 6 Report No.: 120730E04 4 of 6 Report No.: 120730E04 5 of 6 Report No.: 120730E04 6 of 6

Report No.: SA120730E04 1 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 RF EXPOSURE REPORT REPORT NO.: SA120730E04 MODEL NO.: MAX BR1, MAX, Surf Pro, AP One, AP Pro, Device Connector, Express, Balance, Pismo 730 FCC ID: U8G-P1710 RECEIVED: July 30, 2012 TESTED: Aug. 13, 2012 ISSUED: Aug. 28, 2012 APPLICANT: Pismo Labs Technology Limited ADDRESS: 1703A, 17/F, Park Building 476 Castle Peak Road Cheung Sha Wan Hong Kong ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA120730E04 2 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA120730E04 3 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120730E04 Original release Aug. 28, 2012 Report No.: SA120730E04 4 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 1. CERTIFICATION PRODUCT: Pepwave, Peplink, Pismo Wireless Product BRAND NAME: Pepwave, Peplink, Pismo MODEL NO.: MAX BR1, MAX, Surf Pro, AP One, AP Pro, Device Connector, Express, Balance, Pismo 730 TEST SAMPLE: R&D SAMPLE APPLICANT: Pismo Labs Technology Limited TESTED DATE: Aug. 13, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: MAX BR1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Aug. 28, 2012 ( Phoenix Huang, Specialist ) APPROVED BY : , DATE: Aug. 28, 2012 ( May Chen, Deputy Manager ) Report No.: SA120730E04 5 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120730E04 6 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WiFi : Channel Channel Frequency (MHz) Output Power to Antenna (mW) ANTENNA GAIN (dBi) DISTANCE (cm) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 6 2437 977.237 5.1 20 0.62911 1.00 For LTE module: FCC ID (N7NMC7700) Channel Channel Frequency (MHz) Output Power to Antenna (mW) ANTENNA GAIN (dBi) DISTANCE (cm) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 190 836.6 501.187 2 20 0.15803 0.5577 Note: 1. Limit of Electric field=F/1500 2. The LTE output power is frame average power. CONCLUSION: The WiFi and LTE module can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situa…

Text truncated - open the document above for the full version.

Report No.: RF120730E04 1 of 59 Report Format Version 5.0.0 Reference No.: 110719E01, 120110E14 FCC TEST REPORT REPORT NO.: RF120730E04 MODEL NO.: MAX BR1, MAX, Surf Pro, AP One, AP Pro, Device Connector, Express, Balance, Pismo 730 FCC ID: U8G-P1710 RECEIVED: July 30, 2012 TESTED: Aug. 06 to 16, 2012 ISSUED: Aug. 28, 2012 APPLICANT: Pismo Labs Technology Limited ADDRESS: 1703A, 17/F, PARK BUILDING 476 CASTLE PEAK ROAD CHEUNG SHA WAN HONG KONG ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF120730E04 2 of 59 Report Format Version 5.0.0 Reference No.: 110719E01, 120110E14 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 14 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 3.5 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 16 4. TEST TYPES AND RESULTS .............................................................................. 19 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 19 4.1.2 TEST INSTRUMENTS .......................................................................................... 19 4.1.3 TEST PROCEDURES .......................................................................................... 20 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 20 4.1.5 TEST SETUP ....................................................................................................... 21 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 21 4.1.7 TEST RESULTS (MODE 1) .................................................................................. 22 4.1.8 TEST RESULTS (MODE 2) .................................................................................. 24 4.1.9 TEST RESULTS (MODE 3) .................................................................................. 26 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 28 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 28 4.2.2 TEST INSTRUMENTS .......................................................................................... 29 4.2.3 TEST PROCEDURES .......................................................................................... 30 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 30 4.2.5 TEST SETUP ....................................................................................................... 31 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 31 4.2.7 TEST RESULTS ................................................................................................... 32 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 45 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 45 4.3.2 TEST INSTRUMENTS .......................................................................................... 45 4.3.3 TEST PROCEDURE ....................................................…

Text truncated - open the document above for the full version.

Report No.: 120730E04 1 of 3 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Mode 1 ~ 2) Report No.: 120730E04 2 of 3 CONDUCTED EMISSION TEST (Mode 3) Report No.: 120730E04 3 of 3 RADIATED EMISSION TEST