U8G-P1934Industrial-Grade M2M Cellular Router

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2015 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. Pepwave MAX and Surf User Manual Pepwave Products: MAX 700/HD2/HD2 IP67/HD2 mini/HD4/BR1/BR1 Slim/BR1 ENT/BR1 Pro LTE/BR1 IP55/BR2 IP55/On-The-Go/MAX HD2/HD4 with MediaFast/ Surf SOHO Pepwave Firmware 6.2.1 July 2015 Pepwave MAX and Surf User Manual http://www.pepwave.com 2 Copyright @ 2015 Pepwave Table of Contents 1 INTRODUCTION AND SCOPE ................................................................................................. 5 2 GLOSSARY ............................................................................................................................. 6 3 PRODUCT FEATURES ............................................................................................................. 7 3.1 S UPPORTED NETWORK FEATURES .................................................................................7 3.2 O THER SUPPORTED FEATURES......................................................................................9 4 PEPWAVE MAX MOBILE ROUTER OVERVIEW ..................................................................... 10 4.1 MAX 700 ............................................................................................................10 4.2 MAX HD2 ...........................................................................................................12 4.3 MAX HD2 IP67 ....................................................................................................14 4.4 MAX HD2 MINI .....................................................................................................15 4.5 MAX HD4 ...........................................................................................................17 4.6 MAX BR1 ............................................................................................................18 4.7 MAX BR1 SLIM .....................................................................................................20 4.8 MAX BR1 ENT .....................................................................................................22 4.9 MAX BR1 PRO LTE ................................................................................................23 4.10 MAX BR1/2 IP55 .................................................................................................24 4.11 MAX ON-THE-GO ..................................................................................................26 4.12 S URF SOHO ..........................................................................................................27 5 INSTALLATION .................................................................................................................... 29 5.1 P REPARATION ........................................................................................................29 5.2 C ONSTRUCTING THE NETWORK ..................................................................................30 5.3 C ONFIGURING THE NETWORK ENVIRONMENT ................................................................31 6 MOUNTING THE UNIT ......................................................................................................... 32 6.1 W ALL MOUNT .......................................................................................................32 6.2 C AR MOUNT..........................................................................................................32 6.3 IP67 INSTALLATION GUIDE........................................................................................32 7 CONNECTING TO THE WEB ADMIN INTERFACE .................................................................. 32 8 CONFIGURING THE LAN INTERFACE(S)................................................................................ 35 8.1 B ASIC SETTINGS ......................................................................................................35 8.2 C APTIVE PORTAL .....................................................................................................45 9 CONFIGURING THE WAN INTERFACE(S) .............................................................................. 47 9.1 E THERNET WAN ....................................................................................................48 9.2 C ELLULAR WAN .....................................................................................................56 9.3 W I-FI WAN ..........................................................................................................61 9.4 WAN HEALTH CHECK ..............................................................................................68 Pepwave MAX and Surf User Manual http://www.pepwave.com 3 Copyright @ 2015 Pepwave 9.5 D YNAMIC DNS SETTINGS..........................................................................................70 10 ADVANCED WI-FI SETTINGS ................................................................................................ 72 11 MEDIAFAST CONFIGURATION............................................................................................. 75 11.1 S ETTING UP MEDIAFAST CONTENT CACHING .................................................................75 11.2 S CHEDULING CONTENT PREFETCHING ..........................................................................76 11.3 V IEWING MEDIAFAST STATISTICS ................................................................................77 12 BANDWIDTH BONDING SPEEDFUSION TM / PEPVPN ............................................................ 78 12.1 P EPVPN ...............................................................................................................78 12.2 T HE PEPWAVE ROUTER BEHIND A NAT ROUTER ............................................................84 12.3 …

Text truncated - open the document above for the full version.

Pepwave MAX and Surf User Manual http://www.pepwave.com 87 Copyright @ 2015 Pepwave IPsec VPN Settings Name This field is for specifying a local name to represent this connection profile. Active When this box is checked, this IPsec VPN connection profile will be enabled. Otherwise, it will be disabled. Connect Upon Disconnection of Check this box and select a WAN to connect to this VPN automatically when the specified WAN is disconnected. Remote Gateway IP Address / Host Name (QWHUWKHUHPRWHSHHU¶VSXEOLF,3DGGUHVV)RUAggressive Mode, this is optional. Local Networks Enter the local LAN subnets here. If you have defined static routes, they will be shown here. Remote Networks Enter the LAN and subnets that are located at the remote site here. Pepwave MAX and Surf User Manual http://www.pepwave.com 88 Copyright @ 2015 Pepwave Authentication To access your VPN, clients will need to authenticate by your choice of methods. Choose between the Preshared Key and X.509 Certificate methods of authentication. Mode Choose Main Mode if both IPsec peers use static IP addresses. Choose Aggressive Mode if one of the IPsec peers uses dynamic IP addresses. Force UDP Encapsulation For forced UDP encapsulation regardless of NAT-traversal, tick this checkbox. Pre-shared Key This defines the peer authentication pre-shared key used to authenticate this VPN connection. The connection will be up only if the pre-shared keys on each side match. Remote Certificate (pem encoded) Available only when X.509 Certificate is chosen as the Authentication method, this field allows you to paste a valid X.509 certificate. Local ID In Main Mode, this field can be left blank. In Aggressive Mode, if Remote Gateway IP Address is filled on this end and the peer end, this field can be left blank. Otherwise, this field is typically a U-FQDN. Remote ID In Main Mode, this field can be left blank. In Aggressive Mode, if Remote Gateway IP Address is filled on this end and the peer end, this field can be left blank. Otherwise, this field is typically a U-FQDN. Phase 1 (IKE) Proposal In Main Mode, this allows setting up to six encryption standards, in descending order of priority, to be used in initial connection key negotiations. In Aggressive Mode, only one selection is permitted. Phase 1 DH Group This is the Diffie-Hellman group used within IKE. This allows two parties to establish a shared secret over an insecure communications channel. The larger the group number, the higher the security. Group 2: 1024-bit is the default value. Group 5: 1536-bit is the alternative option. Phase 1 SA Lifetime This setting specifies the lifetime limit of this Phase 1 Security Association. By default, it is set at 3600 seconds. Phase 2 (ESP) Proposal In Main Mode, this allows setting up to six encryption standards, in descending order of priority, to be used for the IP data that is being transferred. In Aggressive Mode, only one selection is permitted. Phase 2 PFS Group Perfect forward secrecy (PFS) ensures that if a key was compromised, the attacker will be able to access only the data protected by that key. None - Do not request for PFS when initiating connection. However, since there is no valid reason to refuse PFS, the system will allow the connection to use PFS if requested by the remote peer. This is the default value. Group 2: 1024-bit Diffie-Hellman group. The larger the group number, the higher the security. Group 5: 1536-bit is the third option. Phase 2 SA Lifetime This setting specifies the lifetime limit of this Phase 2 Security Association. By default, it is set at 28800 seconds. Pepwave MAX and Surf User Manual http://www.pepwave.com 89 Copyright @ 2015 Pepwave WAN Connection Priority WAN Connection Select the appropriate WAN connection from the drop-down menu. Pepwave MAX and Surf User Manual http://www.pepwave.com 90 Copyright @ 2015 Pepwave 14 Outbound Policy Management Pepwave routers can flexibly manage and load balance outbound traffic among WAN connections. Important Note Outbound policy is applied only when more than one WAN connection is active. The settings for managing and load balancing outbound traffic are located at Advanced>Outbound Policy or Advanced>PepVPN, depending on the model. 14.1 Outbound Policy Outbound policies for managing and load balancing outbound traffic are located at Network>Outbound Policy> or Advanced>PepVPN>Outbound Policy. There are three main selections for the outbound traffic policy: y High Application Compatibility y Normal Application Compatibility y Custom Note that some Pepwave routers provide only the Send All Traffic To setting here. See Section 12.1 for details. Outbound Policy Settings High Outbound traffic from a source LAN device is routed through the same WAN connection regardless of the destination Internet IP address and protocol. This option provides the Pepwave MAX and Surf User Manual http://www.pepwave.com 91 Copyright @ 2015 Pepwave Application Compatibility highest application compatibility. Normal Application Compatibility Outbound traffic from a source LAN device to the same destination Internet IP address will be routed through the same WAN connection persistently, regardless of protocol. This option provides high compatibility to most applications, and users still benefit from WAN link load balancing when multiple Internet servers are accessed. Custom Outbound traffic behavior can be managed by defining rules in a custom rule table. A default rule can be defined for connections that cannot be matched with any of the rules. The default policy is Normal Application Compatibility. Tip Want to know more about creating outbound rules? Visit our YouTube Channel for a video tutorial! http://youtu.be/rKH4AS_bQnE 14.2 Custom Rules for Outbound Policy Click in the Outbound Policy form. Choose Custom and press the Save button. Pepwave MAX and Surf User Manual http://www.pepwave.com 92 Copyright @ 2015 Pepwave The bottom-most rule is Default(GLWWKLVUXOHWRFKDQJHWKHGHYLFH¶VGHIDX…

Text truncated - open the document above for the full version.

Report No.: 150623E09 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 150623E09 Page 17 Report No.: 150623E09 Page 18

Label location Front view Back view Remarks: The label will be permanently affixed at a conspicuous location on the device. FCC ID: U8G-P1934 Label Location

Report No.: 150623E09 Page 2 Report No.: 150623E09 Page 3 Report No.: 150623E09 Page 4 Report No.: 150623E09 Page 5 Report No.: 150623E09 Page 6 Report No.: 150623E09 Page 7 Report No.: 150623E09 Page 8 Report No.: 150623E09 Page 9 Report No.: 150623E09 Page 10 Report No.: 150623E09 Page 11 Report No.: 150623E09 Page 12 Report No.: 150623E09 Page 13 Report No.: 150623E09 Page 14 Report No.: 150623E09 Page 15 Report No.: 150623E09 Page 16

Report No.: SA150623E09 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150623E09 FCC ID: U8G-P1934 Test Model: MAX BR1 PRO LTE Series Model: MAX BR1 PRO, MAX BR2, MAX BR4, Pismo 934, Surf SOHO, Surf SOHO LTE, MAX BR2 LTE, MAX BR4 LTE Received Date: June 23, 2015 Test Date: July 13 to 14, 2015 Issued Date: July 24, 2015 Applicant: Pismo Labs Technology Limited Address: FLAT/RM A5, 5/F, HK SPINNERS IND BLDG PHASE 6, 481 CASTLE PEAK ROAD, CHEUNG SHA WAN, HONG KONG. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA150623E09 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 Mpe Calculation Formula .................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result Of Maximum Conducted Power .......................................................................... 7 Report No.: SA150623E09 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150623E09 Original release. July 24, 2015 Report No.: SA150623E09 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 25cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA150623E09 Page No. 6 / 7 Report Format Version: 6.1.1 3 Antenna Gain The antennas provided to the EUT, please refer to the following table: WLAN Antenna Spec. No. Transmitter Circuit Brand Model No. Antenna Type Antenna Connecter Gain(dBi) including cable loss Frequency (GHz to GHz) 1 Chain (0) SmartAnt SAA06-220690 DipoleRP-SMA 3 2.4~2.4835 SmartAnt SAA06-220690 DipoleRP-SMA 4-5.5 5.15~5.25 SmartAnt SAA06-220690 DipoleRP-SMA 5.5-6 5.725~5.85 2 Chain (1) SmartAnt SAA06-220690 DipoleRP-SMA 3 2.4~2.4835 SmartAnt SAA06-220690 DipoleRP-SMA 4-5.5 5.15~5.25 SmartAnt SAA06-220690 DipoleRP-SMA 5.5-6 5.725~5.85 LTE Antenna Spec. Set Transmitter Circuit BrandModel No. Antenna Type Antenna Connecter Gain(dBi) including cable loss Frequency (GHz to GHz) 1 Cellular Main Pulse SPDA24700/2700Dipole SMA Male2 698-960/ 1710-2170/ 2500-2700 Cellular Diversity/ Aux Pulse SPDA24700/2700Dipole SMA Male2 GPS Antenna Spec. No. Brand Model No. Antenna Type Antenna Connecter Gain(dBi) including cable loss Frequency (GHz to GHz) 1 Chang Hong GPS-01 Magnetic R-SMA Male -1 1.57542 (+/- 1.023) Report No.: SA150623E09 Page No. 7 / 7 Report Format Version: 6.1.1 4 Calculation Result of Maximum Conducted Power For WLAN: Frequency Band (MHz) Max Power (mW) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2412-2462 833.681 3.00 25 0.21179 1 5180-5240 146.218 5.50 25 0.06606 1 5745-5825 114.815 6.00 25 0.05820 1 For WWAN(2G): Frequency (MHz) Max Power (mW) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 824.2 19…

Text truncated - open the document above for the full version.

Report No.: RF150623E09 Page No. 1 / 56 Report Format Version: 6.1.1 FCC Test Report (WLAN-15.247) Report No.: RF150623E09 FCC ID: U8G-P1934 Test Model: MAX BR1 PRO LTE Series Model: MAX BR1 PRO, MAX BR2, MAX BR4, Pismo 934, Surf SOHO, Surf SOHO LTE, MAX BR2 LTE, MAX BR4 LTE Received Date: June 23, 2015 Test Date: June 30 to July 15, 2015 Issued Date: July 24, 2015 Applicant: Pismo Labs Technology Limited Address: FLAT/RM A5, 5/F, HK SPINNERS IND BLDG PHASE 6, 481 CASTLE PEAK ROAD, CHEUNG SHA WAN, HONG KONG. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150623E09 Page No. 2 / 56 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 14 3.5 General Description of Applied Standards ........................................................................................ 16 4 Test Types and Results ...................................................................................................................... 17 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 17 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 17 4.1.2 Test Instruments ................................................................................................................................ 18 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4.1.5 Test Set Up ........................................................................................................................................ 20 4.1.6 EUT Operating Conditions ................................................................................................................. 20 4.1.7 Test Results ....................................................................................................................................... 21 4.2 Conducted Emission Measurement .................................................................................................. 34 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 34 4.2.2 Test Instruments ............................…

Text truncated - open the document above for the full version.

Report No.: RF150623E09-1 Page No. 1 / 61 Report Format Version:6.1.1 FCC Test Report (WLAN-15.407) Report No.: RF150623E09-1 FCC ID: U8G-P1934 Test Model: MAX BR1 PRO LTE Series Model: MAX BR1 PRO, MAX BR2, MAX BR4, Pismo 934, Surf SOHO, Surf SOHO LTE, MAX BR2 LTE, MAX BR4 LTE Received Date: June 23, 2015 Test Date: June 23 to July 15, 2015 Issued Date: July 24, 2015 Applicant: Pismo Labs Technology Limited Address: FLAT/RM A5, 5/F, HK SPINNERS IND BLDG PHASE 6, 481 CASTLE PEAK ROAD, CHEUNG SHA WAN, HONG KONG. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150623E09-1 Page No. 2 / 61 Report Format Version:6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................. 10 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................ 11 3.3 Duty Cycle of Test Signal .................................................................................................................. 13 3.4 Description of Support Units ............................................................................................................. 14 3.4.1 Configuration of System under Test .................................................................................................. 15 3.5 General Description of Applied Standard .......................................................................................... 17 4 Test Types and Results ...................................................................................................................... 18 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 18 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 18 4.1.2 Test Instruments ................................................................................................................................ 19 4.1.3 Test Procedure .................................................................................................................................. 20 4.1.4 Deviation from Test Standard ............................................................................................................ 20 4.1.5 Test Setup .....................................................…

Text truncated - open the document above for the full version.