U8G-P1PROAXPeplink Pepwave Wireless Product

Pepwave AP One / Peplink AP Pro Series: AP One AX / AP One AX Lite / AP One Rugged AP Pro AX Pepwave AP One Firmware 3.9.2 January 2023 Copyright & Trademarks Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners Table of Contents 1 Introduction and Scope5 2 Product Features and Benefits6 3 Package Contents7 AP One AX (APO-AX)7 AP One AX Lite (APO-AX-LITE)7 AP One Rugged (APO-AC-RUG)7 AP Pro AX (APP-AX-IP67)7 4 Hardware Overview8 4.1 AP One AX8 4.2 AP One AX Lite10 4.3 AP One Rugged11 4.4 AP Pro AX12 5 Installation13 Installation Procedures13 6 Dashboard15 7 Network17 7.1 WAN17 7.2 LAN24 7.2.1 Network Settings25 7.2.2 Port Settings27 7.3 PepVPN28 7.4 Inbound Access32 7.4.1 Port Forwarding32 7.5 NAT Mapping34 7.6 Captive Portal35 7.7 QoS39 https://www.peplink.com2Copyright @ 2022 Pepwave 7.7.1 User Group39 7.7.2 Bandwidth Control40 7.7.3 Application41 7.8 Misc. Settings43 7.8.1 Radius Server43 7.8.2 Certificate Manager45 8 AP Tab45 8.1 AP45 8.1.1 Wireless SSID45 8.1.2 Wireless Mesh55 8.1.3 WDS56 8.1.4 Settings57 8.2 Status59 8.2.1 Access Point59 8.2.2 Wireless SSID64 8.2.3 Wireless Client65 8.2.4 Mesh / WDS66 8.2.5 Nearby Device67 8.2.6 Event Log68 9 System Tab69 9.1 Admin Security69 9.2 Operating Mode72 9.3 Firmware73 9.4 Time74 9.5 Schedule74 9.6 Email Notification76 9.7 Event Log79 9.8 SNMP80 https://www.peplink.com3Copyright @ 2022 Pepwave 9.9 Controller Management82 9.10 Configuration83 9.11 LED84 9.12 Feature Add-Ons84 9.13 Reboot85 9.14 Tools86 9.14.1 PING86 9.14.2 Traceroute86 9.14.3 Wake-on-LAN87 9.14.4 WAN Analysis88 10 Status Tab92 10.1 Device92 10.2 Active Session93 10.3 Client List95 10.4 Event Log96 10.5 WAN Quality97 10.6 Usage Reports98 10.6.1 Real-Time98 10.6.2 Hourly99 10.6.3 Daily100 10.6.4 Monthly101 11 Restoring Factory Defaults102 12 Appendix102 https://www.peplink.com4Copyright @ 2022 Pepwave 1Introduction and Scope Our AP Series of enterprise-grade 802.11ac/a/b/g/n Wi-Fi access points is engineered to provide fast, dependable, and flexible operation in a variety of environments, all controlled by an easy-to-use centralized management system. From the small but powerful AP One AC mini to the top-of-the-line AP Pro Duo our AP Series offers wireless networking solutions to suit any business need, and every access point is loaded with essential features such as multiple SSIDs, VLAN, Mesh, WDS, and Guest Protect. A single access point provides as many as 32 virtual access points (16 on single-radio models), each with its own security policy (WPA, WPA2, etc.) and authentication mechanism (802.1x, open, captive portal, etc.), allowing faster, easier, and more cost-effective network builds. Each member of the AP Series family also features a high-powered Wi-Fi transmitter that greatly enhances coverage and performance while reducing equipment costs and maintenance. https://www.peplink.com5Copyright @ 2022 Pepwave 2Product Features and Benefits Key features and benefits of AP Series access points: ●High-powered Wi-Fi transmitter that enhances coverage and lowers cost of ownership. ●Independent security policies and encryption mechanisms for each virtual access point allow fast, flexible, cost-effective network builds. ●Centralized management via InControl reduces maintenance expense and time. ●Mesh support allows for wireless expansion and enhancement of Wi-Fi coverage. ●WDS support allows secure and fast network expansion. ●Guest Protect support guards sensitive business data and subnetworks. ●WMM (Wi-Fi Multimedia) and QoS (Quality of Service) support keeps video and other bandwidth-intensive data flowing fast and lag-free. ●Supports Wi-Fi Air Monitoring forremote troubleshooting,and proactively monitoring Wi-Fi and WAN performance. https://www.peplink.com6Copyright @ 2022 Pepwave 3Package Contents AP One AX (APO-AX) 1 x AP One AX 1 x Ceiling Mount 1 x Screw Kit AP One AX Lite (APO-AX-LITE) 1 x AP One AX Lite 1 x Ceiling Mount 1 x Screw Kit AP One Rugged (APO-AC-RUG) 1 x AP One Rugged 1 x 12V2A Power Supply 2 x Dual Band Wi-Fi Antennas AP Pro AX (APP-AX-IP67) 1 x AP One Rugged 1 x Water Proof DC Power Plug for IP67 1 x Waterproof Ethernet Connector Kit 1 x Mounting Kit https://www.peplink.com7Copyright @ 2022 Pepwave 4Hardware Overview 4.1AP One AX Front View https://www.peplink.com8Copyright @ 2022 Pepwave LED Indicators Power Blue LED OFF – Power is Off ON – Power is On Status Blue LED OFF – Access point is initializing ON – Access point is ready Ethernet Port Blue LED OFF –No data is being transferred orno device isconnected to the Ethernet port BLINKING – Ethernet port is sending/receiving data ON – A powered-on device is connected to Ethernet port Port TypeAuto MDI/MDI-X ports Wi-Fi Blue LED OFF – 2.4/5GHz Wi-Fi radio is off ON – 2.4/5GHz Wi-Fi radio is on / no Wi-Fi mesh uplink BLINKING – Indicates the state of the 2.4/5GHz Wi-Fi mesh uplink https://www.peplink.com9Copyright @ 2022 Pepwave 4.2AP One AX Lite Front View LED Indicators Status Blue LED OFF – Access point is initializing ON – Access point is ready Ethernet Port Blue LED OFF –No data is being transferred orno device isconnected to the Ethernet port BLINKING – Ethernet port is sending/receiving data ON – A powered-on device is connected to the Ethernet port Port TypeAuto MDI/MDI-X ports Wi-Fi Blue LED OFF – 2.4/5GHz Wi-Fi radio is off ON – 2.4/5GHz Wi-Fi radio is on / no Wi-Fi mesh uplink BLINKING – Indicates the state of the 2.4/5GHz Wi-Fi mesh uplink state https://www.peplink.com10Copyright @ 2022 Pepwave 4.3AP One Rugged Front View LED Indicators Status RED– Access point is initializing GREEN– Access point is ready Wi-Fi OFF – Wi-Fi AP is off GREEN – Wi-Fi AP is on Ethernet Port ON – Port is connected without traffic LAN BLINKING – Ethernet port sending/receiving data OFF – No data is being t…

Text truncated - open the document above for the full version.

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REG ARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 Th is letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U. S. Agent Signature: Da te: Sig ned by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Appl icant Company name: PISMO LABS TECHNOLOGY LIMITED Grantee Code: U8G Contact Name: Antony Chong Street Address: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, City/Province/Zip: Cheung Sha Wan, Hong Kong Telephone No: 85229907600 Email: [email protected] Applicant Signature: Date: 3/9/2023 Signed by (Printed Name/Title): Antony Chong / Director of Hardware Engineering March 13, 2023

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Covered Equipment Certification Attestation Letter 4/11/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: U8G-P1PROAX PISMO LABS TECHNOLOGY LIMITED (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. PISMO LABS TECHNOLOGY LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Antony Chong Title: Director of Hardware Engineering Company Name: PISMO LABS TECHNOLOGY LIMITED Date: 4/11/2023

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Subject: Request for confidentiality FCC ID: U8G-P1PROAX Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby request non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Operational Description (SW Security) Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 14/03/2023 Name and signature of applicant: Antony Chong

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong ____________________ Model Name Declaration Date: March 14, 2023 To whom it may concern We, PISMO LABS TECHNOLOGY LIMITED, declare that our product “Peplink Pepwave Wireless Product, model: AP Pro AX, APP-AX-IP67 are identical in all electrical aspects in relating to the circuit design, PCB layout, electrical components used, internal wiring and function. The differences are only the model and market segmentation. APP-AX-IP67 is our ordering using product code. Authorized Signature on behalf of PISMO LABS TECHNOLOGY LIMITED. Name: Antony Chong Position: Director of Hardware Engineering

PISMO LABS TECHNOLOGY LIMITED Manufacturer Declaration Date: 2023-03-14 Professional installation We, PISMO LABS TECHNOLOGY LIMITED, declare that our product "AP Pro AX", FCC ID: U8G- P1PROAX for professional installation and following KDB 353028 (c) Professional installation requirements below. (1) To qualify for professional installation, the applicant must explain why the hardware is not readily available to average consumer. Reply: Average consumer is not our authorized or certified partner, therefore they cannot purchase our product on our Online Shop website. (2) Marketing—Device cannot be sold via retail to the general public or by mail order; it must be sold to authorized dealers or installers only. Reply: Only authorized or certified partner can log in our Online Shop website to purchase our product. (3) Filing must show that intended use is not for consumers and general public; rather device is generally for industrial/commercial use. Reply: The product will use on industrial or commercial use. (4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer? Reply: The installation person need to get the Peplink certified to install the product. (5) Installation must be controlled. Reply: The installation person need to get the Peplink certified to install the product. (6) Installed by licensed professionals (e.g., device sold to dealer who hire installers). Reply: Only authorized or certified partner can log in our Online Shop website to purchase our product, and install the product. (7) Installation requires special training (e.g., special programming, access to keypad, field PISMO LABS TECHNOLOGY LIMITED strength measurements made). Reply: Need to through by our trainer training to get the Peplink certified. https://www.peplink.com/training/pce/ Authorized Signature on behalf of PISMO LABS TECHNOLOGY LIMITED Name: Antony Chong Position: Director of Hardware Engineering

Report No: 22B1024R-Product Photos Page: 1 of 9 (1) EUT Photo (2) EUT Photo Report No: 22B1024R-Product Photos Page: 2 of 9 (3) EUT Photo (4) EUT Photo Report No: 22B1024R-Product Photos Page: 3 of 9 (5) EUT Photo (6) EUT Photo Report No: 22B1024R-Product Photos Page: 4 of 9 (7) EUT Photo (8) EUT Photo

Report No: 22B1024R-Product Photos Page: 4 of 8 (7) EUT Photo (8) EUT Photo Report No: 22B1024R-Product Photos Page: 5 of 8 (9) EUT Photo (10) EUT Photo Report No: 22B1024R-Product Photos Page: 6 of 8 (11) EUT Photo (12) EUT Photo Report No: 22B1024R-Product Photos Page: 7 of 8 (13) EUT Photo (14) EUT Photo Report No: 22B1024R-Product Photos Page: 8 of 8 (15) EUT Photo (16) EUT Photo RF Chip RF Chip

Report No.: 22B1024R-RFUSV17S-A Page: 1 of 7 RF Exposure Report Product Name : Peplink Pepwave Wireless Product Model No. : AP Pro AX, APP-AX-IP67 FCC ID : U8G-P1PROAX Applicant : PISMO LABS TECHNOLOGY LIMITED Address : A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Date of Receipt : Nov. 29, 2022 Date of Declaration : Mar. 09, 2023 Report No. : 22B1024R-RFUSV17S-A Report Version : V2.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 22B1024R-RFUSV17S-A Page: 2 of 7 Product Name Peplink Pepwave Wireless Product Applicant PISMO LABS TECHNOLOGY LIMITED Address A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Manufacturer PISMO LABS TECHNOLOGY LIMITED Model No. AP Pro AX, APP-AX-IP67 FCC ID U8G-P1PROAX Trade Name Applicable Standard KDB 447498 D01 v06 Minimum test separation distance ≥ 20 cm For low power devices Test Result Complied Documented By : ( Supervisor / Jinn Chen ) Tested By : ( Senior Engineer / Alan Chen ) Approved By : ( Manager / Tim Sung ) Report No.: 22B1024R-RFUSV17S-A Page: 3 of 7 Revision History Report No. Ve r s i o n Description Issued Date 22B1024R-RFUSV17S-A V1.0 Initial issue of report. Jan. 12, 2023 22B1024R-RFUSV17S-A V2.0 Update FCC ID. Mar. 09, 2023 Report No.: 22B1024R-RFUSV17S-A Page: 4 of 7 1. General Information 1.1. EUT Description Product Name Peplink Pepwave Wireless Product Model No. AP Pro AX, APP-AX-IP67 Trade Name FCC ID U8G-P1PROAX Note: For more detailed information please refer to report No.: 22B1024R-RFUSV01S-A and 22B1024R-RFUSV03S-A. Report No.: 22B1024R-RFUSV17S-A Page: 5 of 7 1.2. Test Facility USA : FCC Registration Number: TW0033 Canada : CAB Identifier Number: TW3023 / Company Number: 26930 Site Description : Accredited by TAF Accredited Number: 3023 Test Laboratory : DEKRA Testing and Certification Co., Ltd Address : No. 5-22, Ruishukeng Linkou District, New Taipei City, 24451, Taiwan Performed Location : No. 26, Huaya 1st Rd., Guishan Dist.,Taoyuan City 333411, Taiwan, R.O.C. Phone Number : +886-3-275-7255 Fax Number : +886-3-327-8031 Email Address : [email protected] Website : http://www.dekra.com.tw Report No.: 22B1024R-RFUSV17S-A Page: 6 of 7 2. RF Exposure Evaluation 2.1. Standard Applicable According to KDB 447498 D01 (7.1), A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. 2.2. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 3.0-30 1842/f 4.89/f 900/f 2 6 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 1.34-30 824/f 2.19/f 180/f 2 30 300-1500 -- -- F/1500 30 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 22B1024R-RFUSV17S-A Page: 7 of 7 2.3. Test Result of RF Exposure Evaluation Product : Peplink Pepwave Wireless Product Test Item : RF Exposure Evaluation Band Frequency (MHz) E.I.R.P (dBm) E.I.R.P (mW) Power Density at R = 20 cm (mW/cm2) Limit (mW/cm2) 2.4 GHz 2437 27.31 538.27 0.107 1 5 GHz 5795 28.06 639.73 0.127 1 Note: The conducted output power is refer to report No.: 22B1024R-RFUSV01S-A and 22B1024R-RFUSV03S-A from the DEKRA. 2.4. Calculations for Multi-Transsmitter Mode Ratios Result Limit 2.4GHz 0.107 0.234 1 5GHz 0.127 Ratios = Power Density / Power Density Limit Results PASS

Report No.: 22B1024R-0E3012110014-A Page: 1 of 31 Test report No: 22B1024R-0E3012110014-A FCC TEST REPORT Product Name Peplink Pepwave Wireless Product Trademark Model and /or type reference AP Pro AX, APP-AX-IP67 Applicant ́s name / address PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Manufacturer ́s name / address PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Test method requested, standard FCC CFR Title 47 Part 15 Subpart B:2021, Class A Verdict Summary IN COMPLIANCE Documented By ( Adm. Specialist / Peggy Tu ) Approved By ( Director / Vincent Lin ) Date of Receipt 2022/11/29 Date of Issue 2023/03/13 Report No. 22B1024R-0E3012110014-A Report Version V1.0 Report No.: 22B1024R-0E3012110014-A Page: 2 of 31 INDEX Description Page 1. General Information ............................................................................................. 5 1.1. EUT Description ................................................................................................... 5 1.2. Mode of Operation ............................................................................................... 6 1.3. Configuration & Details of Tested System ............................................................ 7 1.4. EUT Exercise Software ........................................................................................ 9 2. Technical Test .................................................................................................... 10 2.1. Summary of Test Result ..................................................................................... 10 2.2. List of Test Equipment ....................................................................................... 11 2.3. Measurement Uncertainty .................................................................................. 12 2.4. Test Environment ............................................................................................... 13 3. Radiated Emission ............................................................................................. 14 3.1. Test Specification ............................................................................................... 14 3.2. Test Setup .......................................................................................................... 14 3.3. Limit ................................................................................................................... 15 3.4. Test Procedure .................................................................................................. 16 3.5. Test Result ......................................................................................................... 17 3.6. Test Photograph ................................................................................................ 29 Product Photos: Please refer to the file: 22B1024R-Product Photos Report No.: 22B1024R-0E3012110014-A Page: 3 of 31 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 22B1024R-0E3012110014-A Page: 4 of 31 Revision History Report No. Version Description Issued Date 22B1024R-0E3012110014-A V1.0 Initial issue of report. 2023-03-13 Report No.: 22B1024R-0E3012110014-A Page: 5 of 31 1. General Information 1.1. EUT Description Product Name Peplink Pepwave Wireless Product Trademark Model No. AP Pro AX, APP-AX-IP67 EUT Max Frequency 5.8GHz EUT Rated Voltage DC 12V, 1.5A ; 802.3at PoE EUT Test Voltage DC 12V (by Power Adapter) ; 802.3at PoE Note: The EUT is including two models for different marketing requirement. Report No.: 22B1024R-0E3012110014-A Page: 6 of 31 1.2. Mode of Operation DEKRA has verified the construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: Pre-Test Mode Mode 1: Normal Operation(LAN + WiFi 2.4G + WiFi 5G), DC 12V Mode 2: Normal Operation(LAN + WiFi 2.4G + WiFi 5G), PoE Final Test Mode Emission Mode 1: Normal Operation(LAN + WiFi 2.4G + WiFi 5G), DC 12V Mode 2: Normal Operation(LAN …

Text truncated - open the document above for the full version.

Document Number: ‐ Version: V 1.00 Released Date: 2022/11/23 Prepared By: Anton Reviewed By: J.H. 1 RF antenna assembly_external_ WiFi2_5G_single_omni_4dBi Antenna test report Contents  Revised History  Specification  Antenna Placement & Solution  VSWR Results  Test Setup for Radiation Pattern Measurement  2D Radiation Pattern Results  Results Summary (peak gain, efficiency ) 2 Revision History Released Date Version Revised Record 2022/11/23 1.00 Initial version 3 Specification RF Function Number of ANT Frequency Band Remark WiFi2_5G 1 2400~2500 / 5150~5850 MHz Requirements of Antenna Design Requirements of Measurement Test Item Specification Remark Return loss 9 dB Min. Polarization Linear; Vertical Peak gain 2400~2500MHz <3.4 / 4900~5825MHz <4.2dBi Efficiency >50% Radiation pattern Scale: +10~ -40dBi 4 Antenna Placement & Solution 5 Z X VSWR Results 6 Test Setup for Radiation Pattern Measurement Chamber Information AUT XY Z • SATIMO SG-24L Multi-Probe Antenna Measurement System • Angle between probes: 15 ̊ • Frequency range: 400 MHz – 9 GHz • Chamber Room Size: 5m L x 5m W x 5m H Y Z X Right(+X) Left Front Down Up(+Z) Back(+Y) 7 2D Radiation Pattern Results Y Z X Z Y X 2400-2500 MHz 8 2D Radiation Pattern Results Y Z X Z Y X 5150-5850 MHz 9 10 Peak gain Frequency (MHz) Ant1 Gain(dBi) 2400 3.30 2450 3.36 2500 3.15 4900 4.15 5150 4.08 5250 3.85 5350 4.12 5450 4.07 5550 3.87 5650 4.00 5750 3.80 5850 4.08 Results Summary 11 Efficiency Results Summary Frequency (MHz) Ant1 Efficiency(%) 2400 78 2450 79 2500 75 4900 59 5150 56 5250 54 5350 59 5450 60 5550 57 5650 59 5750 58 5850 59

Report No.: 22B1024R-0E3012110014-A Page: 29 of 31 3.6. Test Photograph Test Mode : Mode 1 Description : Front View of Radiated Test Test Mode : Mode 1 Description : Back View of Radiated Test Report No.: 22B1024R-0E3012110014-A Page: 30 of 31 Test Mode : Mode 1 Description : Front View of High Frequency Radiated Test Test Mode : Mode 2 Description : Front View of Radiated Test Report No.: 22B1024R-0E3012110014-A Page: 31 of 31 Test Mode : Mode 2 Description : Back View of Radiated Test Test Mode : Mode 2 Description : Front View of High Frequency Radiated Test