U8G-P1X05BPEPWAVE / peplink Wireless Product

Peplink Balance and MediaFast User Manual Peplink Products: 380X/580X/SDX Pro Peplink Balance Firmware 8.1.2 May 2021 https://www.peplink.com1Copyright @ 2021 Peplink Table of Contents Introduction and Scope8 Glossary9 Product Comparison Charts11 Balance Routers (for Small Office / Branch)11 Balance Routers (for for Enterprise / Headquarters)12 MediaFast Routers13 Product Features14 Advanced Feature Summary18 Drop-in Mode and LAN Bypass: Transparent Deployment18 QoS: Clearer VoIP18 Per-User Bandwidth Control19 High Availability via VRRP19 USB Modem and Android Tethering20 Built-In Remote User VPN Support20 LACP NIC Bonding21 KVM Virtualization21 DPI Engine22 NetFlow22 Wi-Fi Air Monitoring22 SP Default Configuration22 Package Contents23 Peplink Balance One/Two23 Peplink Balance 20/30/30 LTE/30 Pro/5023 Peplink Balance 20X23 Peplink Balance 210/31023 Peplink Balance 310X23 Peplink Balance 310X23 2x LTE Antenna, 1x GPS Antenna23 Peplink Balance 310 5G24 Peplink Balance 310 Fiber 5G24 Peplink Balance 305/380/580/710/1350/250024 https://www.peplink.com2Copyright @ 2021 Peplink Peplink Balance 380X/580X24 Peplink MediaFast 20024 Peplink MediaFast 50025 Peplink EPX25 Peplink SDX25 Peplink SDX Pro25 Peplink Balance Overview26 Peplink Balance One26 Peplink Balance Two28 Peplink Balance 2030 Peplink Balance 20X31 Peplink Balance 30 LTE35 Peplink Balance 30 Pro37 Peplink Balance 5039 Peplink Balance 21041 Peplink Balance 30542 Peplink Balance 31044 Peplink Balance 310X45 Peplink Balance 310 5G47 Peplink Balance 310 Fiber 5G49 Peplink Balance 38051 Peplink Balance 380X52 Peplink Balance 58056 Peplink Balance 580X57 Peplink Balance 71061 Peplink Balance 135062 Peplink Balance 250064 Peplink MediaFast Overview66 Peplink MediaFast 20066 Peplink MediaFast 50067 Peplink MediaFast 75069 Peplink Flex-Module Supported Models71 Peplink EPX71 Peplink SDX74 Peplink SDX Pro77 https://www.peplink.com3Copyright @ 2021 Peplink Flex Module Expansion Modules80 LCD Display Menu83 Installation84 Preparation84 Constructing the Network84 Basic Configuration85 Connecting to the Web Admin Interface85 Configuration with the Setup Wizard86 SpeedFusion Cloud91 Activate SpeedFusion Cloud Service91 Enable SpeedFusion Cloud93 Connect Clients to Cloud101 Link Wi-Fi to Cloud102 Optimize Cloud Application104 Network Tab105 WAN105 Health Check Settings118 Bandwidth Allowance Monitor Settings121 Additional Public IP Settings121 Dynamic DNS Settings122 LAN123 Network Settings124 Network Settings (Common Settings)128 Port Settings133 VPN133 SpeedFusion134 IPsec VPN140 Outbound Policy144 Inbound Access155 Servers155 Services157 DNS Settings159 NAT Mappings177 MediaFast179 https://www.peplink.com4Copyright @ 2021 Peplink Setting Up MediaFast Content Caching179 Viewing MediaFast Statistics181 Prefetch Schedule182 ContentHub184 Configure a website to be published from the ContentHub184 Configure an application to be published from theContentHub186 MDM Settings189 Docker189 KVM190 Captive Portal191 QoS193 User Groups194 Bandwidth Control195 Application196 Prioritization for Custom Application197 DSL/Cable Optimization197 Firewall197 Access Rules198 Intrusion Detection and DoS Prevention203 Content Blocking204 Application Blocking204 Web Blocking205 Customized Domains205 Exempted User Groups205 Exempted Subnets205 URL Logging205 Routing Protocols206 OSPF & RIPv2206 BGP208 Remote User Access212 L2TP with IPsec212 OpenVPN212 PPTP213 Authentication Methods213 Misc. Settings215 High Availability215 https://www.peplink.com5Copyright @ 2021 Peplink Certificate Manager219 Service Forwarding220 SMTP Forwarding221 Web Proxy Forwarding222 DNS Forwarding222 Custom Service Forwarding222 Service Passthrough223 NTP Server224 Grouped Networks224 Remote SIM Management226 SIM Toolkit228 AP Tab230 AP230 AP Controller230 Wireless SSID231 Wireless Mesh235 AP > Profiles236 AP Controller Status240 Info240 Access Points (Usage)241 Wireless SSID244 Wireless Client245 Mesh / WDS247 Nearby Device248 Event Log248 Toolbox249 System Tab250 System250 Admin Security250 Firmware254 Time256 Schedule257 Email Notification258 Event Log261 SNMP262 SMS Control264 https://www.peplink.com6Copyright @ 2021 Peplink InControl265 Configuration266 Feature Add-ons267 Reboot267 Tools267 Ping268 Traceroute268 Wake-on-LAN269 WAN Analysis269 CLI (Command Line) Support274 Status Tab275 Status275 Device275 Active Sessions277 Client List279 WINS Clients280 OSPF & RIPv2280 MediaFast281 PepVPN / SpeedFusion Status282 Event Log287 Device Event Log287 IPsec Event Log288 WAN Quality288 Usage Reports289 Real-Time289 Hourly290 Daily290 Monthly293 Appendix293 Restoration of Factory Defaults294 Routing under DHCP, Static IP, and PPPoE294 FusionSIM Manual297 Case Studies309 Harrington Industrial Plastics313 PLUSS316 Troubleshooting325 https://www.peplink.com7Copyright @ 2021 Peplink https://www.peplink.com8Copyright @ 2021 Peplink Introduction and Scope PeplinkBalanceroutersprovidelinkaggregationandloadbalancingacrossmultipleWANconnections. WedevelopproductsandtechnologiesthatcanhelpyoubuildSD-WANnetworkswithunbreakable connection resilience, unmatched deployment flexibility,and intuitive ease of use. OurproductandtechnologyfocushasalwaysbeenonWANvirtualizationandtheintelligentuseof multiple WAN links at the same time to increase reliabilityand bandwidth whilst reducing costs. WehavetwokeyWANvirtualizationtechnologies,IntelligentloadbalancingforInternetaccessand SpeedFusion VPN Bonding for secure branch to branchconnectivity. The Peplink MediaFast series are a range of routerscapable of content caching. Designedwitheducationandentertainmentinmind,MediaFastdownloadsandacceleratesvideo,iTunes iOS updates, app downloads, and other content foruninterrupted learning and fun anytime. TheMediaFastcanprefetchcontentduringoff-peakhours,savingconnectivitycostsandreducing network burden during busy times. This manual applies to the following Peplink Balanceproducts: ●Peplink Balance One ●Peplink Balance Two ●Pep…

Text truncated - open the document above for the full version.

11.9Captive Portal ThecaptiveportalservesasagatewaythatclientshavetopassiftheywishtoaccesstheInternetusing your router. To configure, navigate toNetwork>CaptivePortal. https://www.peplink.com146Copyright @ 2021 Peplink Captive Portal Settings Enable CheckEnableandthen,optionally,selecttheLANs/VLANsthatwillusethecaptive portal. Hostname Tocustomizetheportal’sformsubmissionandredirectionURL,enteranewURLin this field. To reset the URL to factory settings,clickDefault. Access Mode ClickOpenAccesstoallowclientstofreelyaccessyourrouter.ClickUser Authenticationto force your clients to authenticatebefore accessing your router. SelectExternal Serverto use the Captive Portal witha HotSpot system. As described in the following knowledgebase article: https://forum.peplink.com/t/using-hotspotsystem-wi-fi-on-pepwave-max-routers/ RADIUS Server ThisauthenticatesyourclientsthroughaRADIUSserver.Afterselectingthis option, you will see the following fields: Fillinthenecessaryinformationtocompleteyourconnectiontotheserverand enable authentication. LDAP Server ThisauthenticatesyourclientsthroughaLDAPserver.Uponselectingthisoption, you will see the following fields: Fillinthenecessaryinformationtocompleteyourconnectiontotheserverand enable authentication. Access Quota Set a time and data cap to each user’s Internet usage. Quota Reset Time Thismenudetermineshowyourusagequotaresets.SettingittoDailywillresetit ataspecifiedtimeeveryday.Settinganumberofminutesafterquotareached establish a timer for each user that begins afterthe quota has been reached. https://www.peplink.com147Copyright @ 2021 Peplink Inactive Timeout Clients will get disconnected when the inactive theconfigured time is reached. Default 0: no timeout Allowed Networks Towhitelistanetwork,enterthedomainname/IPaddresshereandclick. Todeleteanexistingnetworkfromthelistofallowednetworks,clickthe button next to the listing. Allowed Clients Towhitelistaclient,entertheMACaddress/IPaddresshereandclick.To deleteanexistingclientfromthelistofallowedclients,clickthebuttonnext to the listing. Splash Page Here,youcanchoosebetweenusingtheBalance’sbuilt-incaptiveportaland redirecting clients to a URL you define. Popup Handling Configurable options for popup handling: - Bypass Popup (Redirection only takes place on normalbrowser) - Automatically show splash page on Safari forApple (iOS / macOS) devices Logout Hostname Ahostnamethatcanbeusedtologoutcaptiveportalwhenbeingaccessedon browser. Customize splash page Click on the provided link in the Captive portal profileto customize the splash page. A new browser tab is opened with a WYSIWYG editorof the splash page oeditthecontent,clickonthecorrespondingelementafterswitchingEditModeto ON. https://www.peplink.com148Copyright @ 2021 Peplink 11.10QoS 11.10.1User Groups LANandPPTPclientscanbecategorizedintothreeusergroups-Manager,Staff,andGuest.This menuallowsyoutodefinerulesandassignclientIPaddressesorsubnetstoausergroup.Youcanapply differentbandwidthandtrafficprioritizationpoliciesoneachusergroupinthe Bandwidth Control and Application sections. Thetableisautomaticallysorted,andthetableordersignifiestherules'precedence.Thesmallerand morespecificsubnetsareputtowardsthetopofthetableandhavehigherprecedence;largerandless specific subnets are placed towards the bottom. Clickthe Add buttontodefineclientsandtheirusergroup.Clickthe buttontoremovethedefined https://www.peplink.com149Copyright @ 2021 Peplink rule. Twodefaultrulesarepredefinedandputatthebottom.Theyare AllDHCPreservation clients and Everyone,andtheycannotberemoved.TheAllDHCPreservationclient representsthe LANclientsdefinedinthe DHCPReservation tableontheLANsettingspage. Everyone representsall clients that are not defined in any rule above. Clickon a rule to change its group. Add / Edit User Group Subnet / IP Address Fromthedrop-downmenu,choosewhetheryouaregoingtodefinetheclient(s)by an IP Address or a Subnet. If IPAddress isselected,enteranamedefinedin DHCPreservation tableoraLAN client'sIPaddress. If Subnet isselected,enterasubnetaddressandspecifyitssubnet mask. Group This field is to define which User Group the specifiedsubnet / IP address belongs to. Onceusershavebeenassignedtoausergroup,theirinternettrafficwillberestrictedbyrulesdefinedfor that particular group. Please refer to the followingtwo sections for details. 11.10.2Bandwidth Control ThissectionistodefinehowmuchminimumbandwidthwillbereservedtoeachusergroupwhenaWAN connectionisinfullload.Whenthisfeatureisenabled, asliderwithtwoindicatorswillbeshown. You canmovetheindicatorstoadjusteachgroup'sweighting.Thelowerpartofthetableshowsthe corresponding reserved download and uploads bandwidthvalue of each connection. By default,50%of bandwidth has been reserved forManager,30%for Staff, and20%for Guest. https://www.peplink.com150Copyright @ 2021 Peplink Youcandefineamaximumdownloadspeed(overallWANconnections)anduploadspeed(foreach WANconnection)thateachindividualStaffandGuestmembercanconsume.Nolimitcanbeimposedon individual Managers. By default, download and uploadbandwidth limits are set to unlimited (set as0). 11.10.3Application Youcanchoosewhethertoapplythesameprioritizationsettingstoallusergroupsorcustomizethe settings for each group. Threeprioritylevelscanbesetforapplicationprioritization:↑High,━Normal,and↓Low.ThePeplink Balancecandetectvariousapplicationtraffictypesbyinspectingthepacketcontent.Selectanapplication bychoosingasupportedapplication,orbydefiningacustomapplicationmanually. Theprioritypreference of supported applications is placed at the top ofthe table. Custom applications are at the bottom. https://www.peplink.com151Copyright @ 2021 Peplink Prioritization for Custom Application Clickthe Add buttontodefineacustomapplication. Clickthebutton intheActioncolumnto delete the custom application in the correspondingrow. WhenSupportedApplicationsisselected,thePeplinkBalancewillinspectnetworktrafficandprioritize theselectedapplications.Alternatively,youcanselectCustomApplicationsanddefinetheapplication by pro…

Text truncated - open the document above for the full version.

PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Tel: +852 2990 7600; Fax: +852 3007 0588 Date: July 8, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: U8G-P1X05B To Whom It May Concern, Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: _____________________ Antony Chong Director of Hardware Engineering [email protected] ●Block Diagrams ●Schematics ●Operational Description The above materials contai n trade secret s and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application.

Reference No.: BEHL-WTW-P20100250 Page No. 1 / 11 CONSTRUCTION PHOTOS OF EUT Reference No.: BEHL-WTW-P20100250 Page No. 2 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 3 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 4 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 5 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 6 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 7 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 8 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 9 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 10 / 11 Reference No.: BEHL-WTW-P20100250 Page No. 11 / 11

Default Access https://192.168.1.1 Username: admin Password: admin Model: Balance 380X Product Code:BPL-380X Serial No.:1925-DE8A-8041 LAN MAC:10-56-CA-15-BE-78 Input : 100-240Vac, 50/60Hz, 1.5A FCC ID: U8G-P1X05B Contains FCC ID: QIPMV31-W Made in Taiwan M8HW1 This device complies with Part 15 of the FCC Rules. Operation is subjecttothefollowingtwoconditions:(1)thisdevicemaynotcause harmfulinterference,and(2)thisdevicemustacceptanyinterference received,includinginterferencethatmaycauseundesiredoperation. Contains IC: 7830A-MV31V CAN ICES-003(A) / NMB-003(A)

Label location

Reference No.: BEHL-WTW-P20100250 Page No. 1 / 16 CONSTRUCTION PHOTOS OF EUT Reference No.: BEHL-WTW-P20100250 Page No. 2 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 3 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 4 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 5 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 6 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 7 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 8 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 9 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 10 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 11 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 12 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 13 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 14 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 15 / 16 Reference No.: BEHL-WTW-P20100250 Page No. 16 / 16

Report No.: FDBEHL-WTW-P20100250 Page No. 1 / 25 Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standards: 47 CFR FCC Part 15, Subpart B, Class A ANSI C63.4:2014 Report No.: FDBEHL-WTW-P20100250 Test Model: Balance 380X, Balance 580X Series Model: Peplink Balance 380X, Peplink Balance 580X, BPL-380X, BPL-580X, EXM-MINI-15GD, FlexModule Mini 1x 5G Module (refer to item 3.1 for more details) EUT FCC ID: U8G-P1X05B Received Date: Nov. 13, 2020 Test Date: May 27 ~ May 28, 2021 Issued Date: Jun. 28, 2021 Applicant: PISMO LABS TECHNOLOGY LIMITED Address: A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 328930 / TW1050 Approved by : , Date: Jun. 28, 2021 Carl Chen / Project Engineer This test report consists of 25 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Vida Chen / Specialist This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: FDBEHL-WTW-P20100250 Page No. 2 / 25 Report Format Version: 7.1.0 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certification .............................................................................................................................................. 4 2 Summary of Test Results ........................................................................................................................ 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................. 5 3 General Information ................................................................................................................................. 6 3.1 Description of EUT .............................................................................................................................. 6 3.2 Primary Clock Frequencies of Internal Source ................................................................................... 6 3.3 Features of EUT .................................................................................................................................. 6 3.4 Operating Modes of EUT and Determination of Worst Case Operating Mode ................................... 7 3.5 Test Program Used and Operation Descriptions ................................................................................. 7 3.6 Connection Diagram of EUT and Peripheral Devices ......................................................................... 8 3.7 Configuration of Peripheral Devices and Cable Connections ............................................................. 9 4 Test Instruments .................................................................................................................................... 10 4.1 Conducted Emissions from Power Ports ........................................................................................... 10 4.2 Radiated Emissions up to 1 GHz ...................................................................................................... 10 4.3 Radiated Emissions above 1 GHz .................................................................................................... 11 5 Limits of Test Items ............................................................................................................................... 12 5.1 Conducted Emissions from Power Ports ........................................................................................... 12 5.2 Radiated Emissions up to 1 GHz ...................................................................................................... 12 5.3 Radiated Emissions above 1 GHz .................................................................................................... 12 6 Test Arrangements ............................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: U8G-P1X05B 1 Pictures of Test Arrangements 1.1 Conducted Emissions from Power Ports FCC ID: U8G-P1X05B 1.2 Radiated Emissions up to 1 GHz FCC ID: U8G-P1X05B 1.3 Radiated Emissions above 1 GHz