UAG-T2Tracking Tag for an Indoor Positioning System

Awarepoint Corporation Phone: (858) 345-5012 10590 W. Ocean Air Drive Fax: (858) 535-1808 Suite 110 www.awarepoint.com San Diego, CA 92130 [email protected] 9/1/2007 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification FCC ID: UAG-T2 IC: 7348A-T2 Re: Authority to act as Agent Applicant: AwarePoint Corporation On our behalf, I appoint Nemko USA Inc., 11696 Sorrento Valley Rd, San Diego, CA, USA to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with AwarePoint Corporation. Agency agreement expiration date: 9/1/2008 Authorized by: Tel: (858) 345-5012 Fax: (858) 535-1808

8/20/2007 Nemko USA 11696 Sorrento Valley Rd.Ste. F San Diego, CA 92121 Re: Request of Confidentiality for Awarepoint model T2 Re: FCCID: UAG-T2 Applicant: AwarePoint Corporation Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying as outlined below: • Schematics • Bill of Materials • Block Diagram • Operating Description • I Internal Photos • User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We request confidential treatment of interior photos for the following reasons: • The device is installed only by company employees • The device shall not be opened by anyone except company employees • The device contains a proprietary antenna that is a trade secret to the company We request confidential treatment of the user manual for the following reasons: • The manual is very technical • The manual is not provided to the consumer because the consumer cannot service the device • The device is installed only by company employees The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Tel: (858) 345-5012 Fax: (858) 535-1808

8/20/2007 Nemko USA 11696 Sorrento Valley Rd.Ste. F San Diego, CA 92121 Re: Product Variations for Awarepoint Tag model T2 FCC ID: UAG-T2 IC Number: 7348A-T2 Applicant: AwarePoint Corporation Our product, Awarepoint Tag Model T2 has two variations: T2-S and T2-A. Both products use the same electronics but have minor differences in their plastic enclosure. The T2-S is a plain case and the T2-A has an additional piece of plastic on the top. The differences are trivial and do not affect RF performance. Sincerely, Tel: (858) 345-5012 Fax: (858) 535-1808

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 85.7dBuV/mFrom test report's measured radiated power. 3 m 1.93E-02V=10 ((35.5-120/120) 0.00011054W= ((V x 3m/5.5) 2 ) Maximum peak output power --Radiated:0.0001105(W) Antenna gain(typical):0.00(dBi) Maximum antenna gain:1.00(numeric) Prediction distance:20.00(cm) Prediction frequency: 2440(MHz) Limit from table below:1.0(mW/cm^2) Power density at prediction frequency:0.00002199(mW/cm^2) 2 4R PG S π = EUT complies FCC/LSGAC Local Official’s Guide to RF A LOCAL GOVERNMENT OFFICIAL'S GUIDE TO TRANSMITTING ANTENNA RF EMISSION SAFETY: RULES, PROCEDURES, AND PRACTICAL GUIDANCE

Nemko USA, Inc. 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 Phone (858) 755-5525 Fax (858) 452-1810 FCC Part 15 Subpart C, 15.247 : 27/09/2007 CERTIFICATION TEST REPORT Report Number: 2007 087190 EMC Project Number: 7190-1 Applicant: AWAREPOINT 10590 WEST OCEAN AIR DRIVE, SUITE 110 SAN DIEGO, CA 92130 Equipment Under Test (EUT): TRACKING TAG Model: T2-S FCC ID: UAG-T2 IC: 7348A-T2 In Accordance With: FCC Part 15 Subpart C, 15.247 RSS-210, Issue 7, June 2007 Tested By: Nemko USA Inc. 11696 Sorrento Valley Road, Suite F San Diego, CA 92121 Authorized By: Michael T. Krumweide, EMC Supervisor Date: September 26, 2007 Total Number of Pages: 39 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 UAG-T2 Report Number: 2007 087190 EMC 7348A-T2 Specification: FCC Part 15 Subpart C, 15.247 Page 2 of 39 2.1. Section 1. Summary of Test Results General All measurements are traceable to national standards These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15; Subpart C. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. The assessment summary is as follows: Apparatus Assessed: Tracking Tag Model T2-S Specification: FCC Part 15 Subpart C, 15.247 Date Received in Laboratory: August 30, 2007 Compliance Status: Complies Exclusions: None Non-compliances: None Report Release History: REVISION DATE COMMENTS - September 26, 2007 Prepared By: Ferdinand Custodio - September 26, 2007 Initial Release: Mike T. Krumweide Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 UAG-T2 Report Number: 2007 087190 EMC 7348A-T2 Specification: FCC Part 15 Subpart C, 15.247 Page 3 of 39 Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. TESTED BY: ___________________________________ Date: September 26, 2007 Ferdinand Custodio, EMC Test Engineer Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 UAG-T2 Report Number: 2007 087190 EMC 7348A-T2 Specification: FCC Part 15 Subpart C, 15.247 Page 4 of 39 TABLE OF CONTENTS 2.1. Section 1. Summary of Test Results.......................................................................2 Section 2: Equipment Under Test..........................................................................................5 2.1 Product Identification..........................................................................................................5 2.2 Samples Submitted for Assessment.....................................................................................9 2.3 Theory of Operation..........................................................................................................10 2.4 Technical Specifications of the EUT...................................................................................10 Section 3: Test Conditions....................................................................................................11 3.1 Specifications...................................................................................................................11 3.2 Deviations From Laboratory Test Procedures.....................................................................11 3.3 Test Environment.............................................................................................................11 3.4 Test Equipment................................................................................................................12 Section 4: Observations.........................................................................................................13 4.1 Modifications Performed During Assessment......................................................................13 4.2 Record Of Technical Judgements......................................................................................13 4.3 EUT Parameters Affecting Compliance..............................................................................13 4.4 Test Deleted.....................................................................................................................13 4.5 Additional Observations....................................................................................................13 Section 5: Results Summary.................................................................................................14 5.1 Test Results.....................................................................................................................14 Appendix A: Test Results......................................................................................................15 20dB Bandwidth...............................................................................................................................15 Out-of-band Emissions / Radiated Emissions within Restricted Bands..................................................19 Bandedge Measurements.................................................................................................................24 Minimum 6dB RF Bandwidth.........................................…

Text truncated - open the document above for the full version.

Antenna +Cable -PreAmp =Correction Factor Loss Gain Factor (dB/m) (dB) (dB) (dB/m) 27.3 5.9 -33.5 -0.4 Peak 60.1 – 0.4 = 59.7 which is less than 74 therefore complies Average 49.6 -.4 = 49.2 which is less than 54 therefore complies