UC3M652G4002.4GHz Optical Mouse

System Compatibility PC running Windows XP/XP64/Vista/Mac OS X Installation (1) Open the battery cover at the bottom of the mouse. (2) Insert the batteries in the right direction. (3) Turn on the computer and plug in the receiver into the computers USB port. It will automatically detect the product and assign an appropriate driver. (4) When the connection is established, you will see the blinking of the LED light from the bottom of the mouse. Mobile Optical Mouse 800/1200/1600 DPI Wireless USB Receiver (3) POWER SWITCH ON/OFF OFF/ ON Battery Cover(1) AA Battery (2) SWAP 800/1200/1600 DPI Backward Button Forward Button FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Authorization Letter We, (the approval holder) Company name Intech Electronics Corp. Addresss Hall B3 , Yuan-Hu Industry Park , Golf Blvd., City Taiwan Country China declare that the following representative (agent): Name (person) Bovey.yang Company name NTEK Testing Technology Co., Ltd. Addresss 1/F, Building E, Fenda Science Park Sanwei Community, Xixiang Street, Baoan District City Shenzhen Country China to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Description 2.4GHz OPTICAL MOUSE; Dongle Type or Model(s) M-A65, M-615, M-965, M-B65; WT460 MOUSE/BU Tradename or Brand(s) ASUS We also authorize BZT – TCP Certification GmbH, Ms.Wanida Patthanavoj (address: Hermann - Loens - Weg 6, 15859 Storkow b. Berlin Germany) to process the application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Ta i w a n 2011/10/25 Haijun Zhang Sales Manager

FCC Confidentiality Request To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Intech Electronics Corp. Addresss Hall B3 , Yuan-Hu Industry Park , Golf Blvd., City Taiwan Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: UC3 UC3M652G400 FCC ID: UC3 UC3R0902G401 of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) x Operational Description x Block Diagrams x Schematics Diagrams Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Ta i w a n 2011/10/20 Haijun Zhang Sales Manager

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4

料号:PSN-0A651301 Model:M-A65 FCC ID:UC3M 652G400 2.4GHz OPTICAL MOUSE Made in China

Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11

Page 1 of 34 Report No.:NTEK-2011DG11012657F ` FCC RADIO TEST REPORT Report Reference No. ............... : NTEK-2011DG11012657F Compiled by (+ signature) ........... Jim He Approved by (+ signature) ........... Bovey Yang Applicant’s name........................... : Intech Electronics Corp. Address ...................................... : Hall B3,Yuan-hu Industrial Park,Golf Road,Song-Yuan Village Guan-Lan,Shenzhen City,GuangDong Province,China,P.R.C. Manufacture's Name...................... : Intech Electronics Corp. Address ...................................... : Hall B3,Yuan-hu Industrial Park,Golf Road,Song-Yuan Village Guan-Lan,Shenzhen City,GuangDong Province,China,P.R.C. Test specification: Standard ..................................... : FCC Part15.249 Test procedure............................... : ANSI C63.4-2003 Test item description Product name ........................ : 2.4GHz OPTICAL MOUSE FCC ID UC3M652G400 Trademark ............................ : ASUS Model and/or type reference : M-A65, M-615, M-965, M-B65, WT460 Rating(s) ................................ : DC 3V from battery Testing Laboratory information: Testing Laboratory Name ..... : NTEK Testing Technology Co., Ltd Address ................................ : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao ＇an District, Shenzhen P.R. China. This device described above has been tested by NTEK Testing Technology Co., Ltd, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK Testing Technology Co., Ltd, this document may be altered or revised by NTEK Testing Technology Co., Ltd, personal only, and shall be noted in the revision of the documen Testing....................................................: Date of receipt of test item ......................: 22 Oct. 2011 Date (s) of performance of tests .............: 22 Oct. 2011 ~02 Nov. 2011 Date of Issue...........................................: 02 Nov. 2011 Test Result...............................................: Pass Page 2 of 34 Report No.:NTEK-2011DG11012657F ` Table of Contents Page 1 . SUMMARY OF TEST RESULTS 3 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 7 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3 . TEST RESULT 11 3.1 ANTENNA REQUIREMENT 11 3.1.1 STANDARD REQUIREMENT 11 3.1.2 EUT ANTENNA 11 3.2 CONDUCTED EMISSION MEASUREMENT 12 3.2.1 POWER LINE CONDUCTED EMISSION LIMITS 12 3.2.2 TEST PROCEDURE 13 3.2.3 DEVIATION FROM TEST STANDARD 13 3.2.4 TEST SETUP 13 3.2.5 TEST RESULT 13 3.3 RADIATED EMISSION MEASUREMENT 14 3.3.1 RADIATED EMISSION LIMITS 14 3.3.2 TEST PROCEDURE 15 3.3.3 DEVIATION FROM TEST STANDARD 15 3.3.4 TEST SETUP 16 3.3.5 TEST RESULTS (BLOW 30MHZ) 18 3.3.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 19 3.3.7 TEST RESULTS (ABOVE 1000 MHZ) 21 3.3.8 TEST RESULTS (RESTRICTED BANDS REQUIREMENTS) 27 4 . BANDWIDTH TEST 31 4.1 TEST PROCEDURE 31 4.2 DEVIATION FROM STANDARD 31 4.3 TEST SETUP 31 4.4 TEST RESULTS 32 5 . EUT TEST PHOTO 34 6 . APPENDIX-Photographs of EUT Constructional Details Page 3 of 34 Report No.:NTEK-2011DG11012657F ` 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) & RSS-Gen Issue 3 & RSS-210 Issue 8 Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A Note(1) 15.203 Antenna Requirement Pass 15.249 Radiated Spurious Emission Pass 15.249 Occupied Bandwidth Pass NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. Page 4 of 34 Report No.:NTEK-2011DG11012657F ` 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±3.2dB 2 Radiated Emission Test ±4.7dB 3 RF power,conducted ±0.16dB 4 Spurious emissions,conducted ±0.21dB 5 All emissions,radiated(<1G) ±4.68dB 6 All emissions,radiated(>1G) ±4.89dB Page 5 of 34 Report No.:NTEK-2011DG11012657F ` 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment 2.4GHz OPTICAL MOUSE Trade Name ASUS Model Name M-A65, M-615, M-965, M-B65, WT460 OEM Brand/Model Name N/A Model Difference The PCB is same, olny the appearance is different Product Description The EUT is a 2.4GHz OPTICAL MOUSE Operation Frequency: 2403~2478 MHz Channel Number 20 Modulation Type: GFSK Antenna Designation: PCB antenna Antenna Gain(Peak) 0 dBi Channel List Please refer to the Note 2. Power Source DC Voltage supplied from 2*AA battery Power Rating DC 3V from battery Connecting I/O Port(s) Please refer to the User's Manual Products Covered N/A EUT Modification(s) N/A Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Channel List Group Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) 01 2403 2478 2453 2413 2466 02 2404 2474 2444 2424 2464 03 2405 2475 2445 2415 2465 04 2406 2476 2436 2456 2416 Page 6 of 34 Report No.:NTEK-2011DG11012657F ` 3. Table for Filed Antenna Ant . Brand Model Name Antenna Type Connector Gain (dBi) NOTE 1 N/A N/A PCB Antenna NA 0 Antenna Page 7 of 34 Report No.:NTEK-2011DG11012657F ` 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. P…

Text truncated - open the document above for the full version.

Page 34 of 34 Report No.:NTEK-2011DG11012657F ` 5. EUT TEST PHOTO Radiated Measurement Photos