UDV-1103022011009Wireless Module

Development Kit Manual SIM5320AD_EVB_User Guide_V1.01 Document Title: SIM5320AD EVB User Guide Version: 1.01 Date: 2011-04-02 Status: Release Document Control ID: SIM5320AD_EVB_User Guide_V1.01 General Notes SIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCom by the customers. SIMCom has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by SIMCom within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of SIMCo Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Shanghai SIMCom Wireless Solutions Ltd. 2011 Smart Machine Smart Decision SIM5320AD EVB User Guide 02.04.2011 2 Contents Contents ............................................................................................................................................2 Figure Index ......................................................................................................................................2 Table Index........................................................................................................................................3 Version History .................................................................................................................................3 1 Overview........................................................................................................................................4 2 SIM5320AD EVB..........................................................................................................................5 3 EVB accessories.............................................................................................................................7 4 Accessory Interface ........................................................................................................................8 4.1 Power Interface ....................................................................................................................8 4.2 SIM card interface................................................................................................................9 4.3 Antenna Interface ...............................................................................................................10 4.4 RS232 Interface.................................................................................................................. 11 4.5 Operating Status LED ........................................................................................................12 4.6 USB interface .....................................................................................................................12 4.7 Switch interface..................................................................................................................13 4.8 IO interface.........................................................................................................................14 5 EVB and accessories ....................................................................................................................16 6 Quickly start.................................................................................................................................17 6.1 Running ..............................................................................................................................17 6.2 Installing Driver .................................................................................................................17 6.3 Connecting Net and calling ................................................................................................18 6.4 Downloading ......................................................................................................................18 6.5 Turning off .........................................................................................................................19 6.6 Measuring the current consumption ...................................................................................19 Figure Index FIGURE 1: EVB VIEW ........................................................................................................................... 6 FIGURE 2: EVB ACCESSORY............................................................................................................... 7 FIGURE 3: POWER SELECTION JUMPER.......................................................................................... 8 FIGURE 4: AUDIO INTERFACE .........................................................................错误！未定义书签。 FIGURE 5: SIM CARD SOCKET ........................................................................................................... 9 FIGURE 6: MAIN ANTENNA CONNECTOR ..................................................................................... 10 FIGURE 7: GPS ANTENNA CONNECTOR ........................................................................................ 10 FIGURE 8: SERIAL PORT.................................................................................................................... 11 FIGURE 9: STATUS LED ........................................................................................…

Text truncated - open the document above for the full version.

Module approval cover letter I: The module have its own RF shielding II: The module must have buffered modulation/data inputs-Kindly refer the detailed description on the block diagram. III: The module have its own power supply regulation and kindly refer section 3.1 of the manual which detailed the power supply regulation. IV: The module have its own antenna section 4.3 on the manual have detailed description of the configuration of all antennas. V: The module is tested in a stand-alone configuration via a test-kit. Please see section photographs of test configuration in the test report. VI: The module labeled with its permanently affixed FCC ID; VII: The module comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; VIII:The module comply with RF exposure requirements Sincerely, __________________ Xing Chen / Operation monitoring Manager Shanghai Simcom Ltd.

Shanghai Simcom Ltd. Date: November 29, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: UDV-1103022011009 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description 4 Tune up procedure 5 Bom list The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Sincerely, Xing Chen / Operation monitoring Manager Shanghai Simcom Ltd.

RF_160, Issue 02 Shanghai Simcom Ltd. Declaration of Authorization We Name: Shanghai Simcom Ltd. Address: Building A, SIM Technology Building No.633, Jinzhong Road, City: Shanghai,................................................................ Country: China ............................................................................ Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Wireless Module Type designation: SIM5320AD on our behalf. Date: ...... 2011/11/29................. City: Shanghai ...... .......................... Name: ...... Xing Chen ................................ (2) Function: ... Operation monitoring Manager............................ Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Shanghai Simcom Ltd. Date: November 29, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: UDV-1103022011009 ATTESTATION FCC ID: UDV-1103022011009 Product: Wireless Module Model: SIM5320AD We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Xing Chen / Operation monitoring Manager Shanghai Simcom Ltd.

¾ EUT Photograph (1) EUT Photo (2) EUT Photo Smart Machine Smart Decision SIM5320AD EVB User Guide 02.04.2011 5 2 SIM5320AD EVB

¾ EUT Photograph (1) EUT Photo (2) EUT Photo

RF Exposure Evaluation Declaration Product Name : Wireless Module Model No. : SIM5320AD FCC ID : UDV-1103022011009 Applicant : Shanghai Simcom Ltd. Address : Building A, SIM Technology Building No.633, Jinzhong Road, Shanghai, China Date of Receipt : 17/11/2011 Issued Date : 28/11/2011 Report No. : 11BS053R-RF-US Report Version : V1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 11BS053R-RF-US Page: 2 of 8 Test Report Certification Issued Date : 28/11/2011 Report No. : 11BS053R-RF-US Product Name : Wireless Module Applicant : Shanghai Simcom Ltd. Address : Building A, SIM Technology Building No.633, Jinzhong Road, Shanghai, China Manufacturer : Shanghai Simcom Ltd. Address : Building A, SIM Technology Building No.633, Jinzhong Road, Shanghai, China Model No. : SIM5320AD FCC ID : UDV-1103022011009 EUT Voltage : DC 3.8V Trade Name : SIMCom Applicable Standard : FCC OET Bulletin 65 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No： 11BS053R-RF-US Page: 3 of 8 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No： 11BS053R-RF-US Page: 4 of 8 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No： 11BS053R-RF-US Page: 5 of 8 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. 1.3. Test Result of RF Exposure Evaluation 1.3.1. Conducted Power Analysis Table 1: Duty Cycle of TDMA Signal No. of timeslots 1 2 3 4 Duty Cycle 1 : 8 1 : 4 1 : 2.66 1 : 2 Timebased avg. power compared to slotted avg. power -9 dB -6 dB -4.25 dB -3 dB The following table shows the conducted power measured and time based average power calculated: Report No： 11BS053R-RF-US Page: 6 of 8 Table 2 Frequency BandModulation Timeslots Avg. Burst Power (dBm) Time based average power (Calculated) GSM850 GMSK 1 32.65 23.65 GSM850 GMSK 2 30.21 24.21 GSM850 GMSK 3 29.15 24.90 GSM850 GMSK 4 30.47 27.47 GSM850 8PSK 1 26.82 17.82 GSM850 8PSK 2 26.23 20.23 GSM850 8PSK 3 25.18 20.93 GSM850 8PSK 4 24.21 21.21 PCS1900 GMSK 1 29.14 20.14 PCS1900 GMSK 2 27.81 21.81 PCS1900 GMSK 3 25.79 21.54 PCS1900 GMSK 4 27.70 24.70 PCS1900 8PSK 1 24.69 15.69 PCS1900 8PSK 2 24.97 18.97 PCS1900 8PSK 3 23.88 19.63 PCS1900 8PSK 4 22.86 19.86 FDD II (1900) QPSK --- 22.31 22.31 FDD V (850) QPSK --- 23.30 23.30 Report No： 11BS053R-RF-US Page: 7 of 8 1.3.2. Host Platform Analysis The MPE calculation was performed for the maximum antenna gain maybe used of stand-alone condition. According to FCC Part2.1091(c) requirement, the maximum ERP (below 1.5GHz) is 1.5W and (above 1.5GHz) is 3W. Conjunction with FCC Part22H&24E requirements, the following table shows the maximum antenna gain allowed for stand-alone situation. According to FCC rules, maximum ERP allowed is 7W (38.45dBm) for Part22H, maximum E…

Text truncated - open the document above for the full version.

FCC Part22H&24E Test Report Product Name : Wireless Module Model No. : SIM5320AD FCC ID : UDV-1103022011009 Applicant : Shanghai Simcom Ltd. Address : Building A, SIM Technology Building No.633, Jinzhong Road, Shanghai, China Date of Receipt : 17/11/2011 Test Date : 17/11/2011~ 24/11/2011 Issued Date : 28/11/2011 Report No. : 11BS053R-HP-US-P07V01 Report Version : V 1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 11BS053R-HP-US-P07V01 Page: 2 of 81 Test Report Certification Issued Date : 28/11/2011 Report No. : 11BS053R-HP-US-P07V01 Product Name : Wireless Module Applicant : Shanghai Simcom Ltd. Address : Building A, SIM Technology Building No.633, Jinzhong Road, Shanghai, China Manufacturer : Shanghai Simcom Ltd. Address : Building A, SIM Technology Building No.633, Jinzhong Road, Shanghai, China Model No. : SIM5320AD FCC ID : UDV-1103022011009 EUT Voltage : DC 3.8V Brand Name : SIMCom Applicable Standard : FCC CFR Title 47 Part 2,TIA/EIA 603-C FCC Part22 Subpart H, FCC Part24 Subpart E Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Engineering Supervisor: Robin Wu) Approved By : (Engineering Manager: Marlin Chen) Report No.: 11BS053R-HP-US-P07V01 Page: 3 of 81 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3 rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 11BS053R-HP-US-P07V01 Page: 4 of 81 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................... 6 1.1. EUT Description ......................................................................................................... 6 1.2. Mode of Operation...................................................................................................... 8 1.3. Tested System Details ................................................................................................ 9 1.4. Configuration of Tested System ................................................................................ 10 1.5. EUT Exercise Software............................................................................................. 11 2. Technical Test ........................................................................................................... 12 2.1. Summary of Test Result............................................................................................ 12 2.2. Test Environment...................................................................................................... 13 3. Peak Output Power .................................................................................................. 14 3.1. Test Equipment......................................................................................................... 14 3.2. Test Setup................................................................................................................. 15 3.3. Limit ..........................................................................................................................15 3.4. Test Procedure......................................................................................................... 15 3.5. Uncertainty ............................................................................................................... 18 3.6. Test Result................................................................................................................ 19 3.7. Test Photograph....................................................................................................... 25 4. Modulation Characteristic ......................................................................................... 27 4.1. Test Equipment......................................................................................................... 27 4.2. Test Setup................................................................................................................. 27 4.3. Limit ........................................................................…

Text truncated - open the document above for the full version.

Test Photograph Description: ERP Test Setup Description: Substitution Antenna for ERP Test Description: EIRP Test Setup Description: Substitution Antenna for EIRP Test Description: Radiated Spurious Emissions Test Setup for Below 1GHz Description : Radiated Spurious Emissions Test Setup for Above 1GHz