UF8N4410PORTABLE MULTIMEDIA PLAYER WITH BLUETOOTH

1 Welcome to Your Product’s User Manual Thank you very much for purchasing our device. Before using this product, please be sure to read this manual. ƒActual product specifications may differ from what is indicated in this manual as product enhancements are implemented without prior notice. ƒPrinted at the time of production, this manual may contain technical or editorial mistakes or omission. 2 3 CONTENTS WARNING04 PRECAUTIONS FOR SAFETY05 BEFORE STARTING Basic Functions 12 What is GPS? 12 GPS Reception Time Guide 12 Product parts 13 Accessories14 Charging the battery 15 Installing the device in a car 16 제품 세워서 사용하기17 USING THE BASIC FUNCTIONS Main menu screen 20 Programs20 TITLE BAR21 NAVIGATION22 MOVIE PLAYER23 JUKE BOX26 HANDS FREE29 OFFICE WHITE BOARD33 IMAGE VIEWER35 CAR DIARY36 FILE BROWSER43 CALCULATOR44 CONTROL PANEL SCREEN & DISPLAY45 VOLUME & SOUNDS46 STYLUS47 POWER48 ADDITIONAL FUNCTIONS PC LINK FUNCTIONS Linking with a PC 50 Delinking from a PC 50 Moving/deleting files 50 Firmware Upgrade 51 TRANSCODER Before using the Transcoder52 Installing the Transcoder53 Using the Transcoder54 Whole file conversion 56 Partial file conversion 57 DVD Player59 Using DVD Converter 60 Converting DVD files 61 RealVideo Converter 61 Upgrading Transcoder61 Advanced DVD Converter 62 Quick Time Converter62 TROUBLESHOOTING63 SPECIFICATION65 4 FCC compliance Information WARNING This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. 5 To prevent causing damage to the user’s property and to ensure the user’s safety, please read carefully the following precautions. Use only dry cloth and not water or chemicals for cleaning. Avoid putting heavy objects, cup, cosmetics, chemicals, or any water-filled vessel on top of the product. Avoid exposing this product to shock or impact and keep it away from magnetic fields or vibration. Avoid simultaneously pressing multiple buttons. This may cause malfunction or product failure. Do not disassemble, repair, or reconstruct without an authorized technician. Placing the product in wet and dusty places may cause malfunction. PRECAUTIONS FOR SAFETY 6 PRECAUTIONS FOR SAFETY Using unauthorized hardware or software may cause operational problems. Prevent any foreign substance to come in contact with the memory card or the internal parts of this device, as it might cause malfunctions. Keep the product away from too hot/cold or wet places. Connect the USB, earphone and plugs correctly as instructed. Whenever any problem or program error occurs with this device, please first refer to the instruction manual and then contact our service center. Do not attempt to disassemble, repair, or reconstruct the device without an authorized technician. Please promptly recharge the device with the supplied power adaptor as soon as the “Low battery” warning message appears. Ignoring the warning message and continuing to use the device will completely discharge the battery and may cause all information on the device to be erased. In using vehicle power, please first check if there is no problem with the power supply before connecting the device to the cigar jack adaptor. Any sudden power spike may damage the device. 7 PRECAUTIONS FOR SAFETY | Navigation precautions | ƒTo maximize the GPS signal reception, remove any paint, sunscreen, or snow on the windshield, and any other objects that can block GPS antenna from receiving the GPS signal. Depending on the specific device installed in the car, some hinder in GPS reception might occur. Navigation does not warranty quality GPS reception rate in all cars. ƒDo not leave the navigation device inside the car when the temperature is rising due to direct sun light, etc. Rapid increase of the temperature inside the car may cause the inner battery to explode. When temperature is high such as during the summer, do not to leave this device in the car. ƒThe navigation holder is a glass suction-type holder that normally strongly attaches to any glass surface. Before driving, always check if it is properly attached. If not, the vibration during driving may cause the holder to separate and fall off. User is responsible for any damage incurred in such a case. If the product will not be used for a long time, detach it and store in a safe place. ƒApplying paint or putting stickers on the GPS antenna may cause problems in GPS signal reception and damage the device. ƒWe do not provide a warranty for the compatibility of some accessories which are not provided by us. We are als…

Text truncated - open the document above for the full version.

337-17 Wonchun-Dong, Youngtong-gu, Suwon-city, Kyunggi-do, Korea May 14, 2007 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA In re: Elentec Co., Ltd. FCC ID: UF8N4410 Request for Confidentiality Gentlemen: In accordance with 0.459 of CFR 47, Elentec Co., Ltd. hereby requests confidentiality of the Block diagram(Block Diagram_UF8N4410.pdf), Schematics(Schematic_UF8N4410.pdf), Parts list(Part List_ UF8N4410.pdf) and Operational description(Operational Description_ UF8N4410.pdf). These documents contain detailed system and equipment description and related information about the product which Elentec Co., Ltd. considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Elentec Co., Ltd. considers that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, M.R Lee / Manager

337-17 Wonchun-Dong, Youngtong-gu, Suwon-city, Kyunggi-do, Korea May 14, 2007 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA In re: Elentec Co., Ltd. FCC ID: UF8N4410 Request for Short-Term Confidentiality To Whom It May Concern: In accordance with 0.457 and 0.459 of CFR 47, Elentec Co., Ltd. requests short-term confidentiality of following sections of this application for a period of 45 days after grant is issued. Test setup photos(Test Photo_UF8N4410.pdf) External photos(Ext Photo_ UF8N4410.pdf) Internal photos(Int Photo_ UF8N4410.pdf)) User’s manual(User Manual_ UF8N4410.pdf)) These documents contain detailed system and equipment descriptions and related information about the product, which Elentec Co., Ltd. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Elentec Co., Ltd. feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely, M.R Lee / Manager

FCCID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 1 FCCID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 2 FCCID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 3 FCCID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 4

FCC ID: UF8N4410 FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase

FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 1 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 2 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 3 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 4 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 5 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 6 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 7

ACS2450ICALN Ver 0.0 (2007.02.13) I 제품명칩안테나 사용자 이랜텍 적용모델 LN 4500 사용자 CODE 공급자 주식회사 파트론 공급자 CODEACS2450ICALN 이랜텍 작성자검토자승인자 ( 주 ) 파트론 작성자품질합의승인자 개발 2P품질보증파트연구소 전찬익이광규임병준 02/1302/1302/13 경기도 화성시 반월동 33 번지 나동 455-300 Tel : 031-201-7870~6 Fax : 031-201-7800 www.partron.co.kr 2007 . 02. 13 승인원 ACS2450ICALN Ver 0.0 (2007.02.13) II DIELECTRIC CHIP ANTENNA SPECIFICATION MODEL : ACS2450ICALN 작성자검토자승인자 개발 2P품질보증파트연구소 전찬익이광규임병준 02/1302/1302/13 2007.02.13 경기도 화성시 반월동 33 번지 나동 455-300 Tel : 031-201-7870~6 Fax : 031-201-7800 www.partron.co.kr ACS2450ICALN Ver 0.0 (2007.02.13) III - 목차 - 1. 이력 관리 .................................................................... 2. 전기적 특성 .................................................................. 3. 기구적 특성 .................................................................. 4 . 시험 방법 ................................................................... 5. 초기 검사 성적서 .......................................................... 6. 신뢰성 보증 조건 ............................................................ 7. 납땜 조건 ................................................................... 8. 주의 사항 .................................................................. 9 . 포장사양 ..................................................................... 10. 관리공정도 ................................................................. 11 . 유해물질 성적서 .............................................................. 19 p 1 p 2 p 7 p 10 p 11 p 12 p 13 p 13 p 14 p 16 p ACS2450ICALN Ver 0.0 (2007.02.13) 1/20 Page 1.이력관리 Revision NoOriginatorDescription of changesDate of changes Ver 0.0 정찬익 승인원 제정 2007.02.13 ACS2450ICALN Ver 0.0 (2007.02.13) 2/20 Page 2.전기적 특성 2.1단품 Spec ITEMSPEC Frequency Range [MHz] 2400 ~ 2485 SWR [Max] 3:1 Bandwidth [MHz] 85 Gain (Peak / Avg) [dBi] 1.2 / -2.1 2.2 Set 실장 측정 ITEMSPEC Frequency Range [MHz] 2400 ~ 2485 VSWR [Max] 3:1 Bandwidth [MHz] 85 Polarization Linear Gain[dBi] Total Gain ( Peak / Avg ) [dBi] 4.2 / -6.2 Azimuth Theta Peak -3.46 Average -6.89 Phi Peak -1.50 Average -7.57 Elevation 1 Theta Peak -2.04 Average -6.38 Phi Peak -3.87 Average -10.30 Elevation 2 Theta Peak -9.02 Average -16.94 Phi Peak 4.20 Average -1.40 2.3 Test Fixture 측정 ITEMSPEC Frequency Range [MHz] SWR [Max] 3:1 Bandwidth [MHz] 80 CTQ CTQ ACS2450ICALN Ver 0.0 (2007.02.13) 3/20 Page 2.3 Set 실장 측정 Graph 2.4 Test Fixture 측정 Graph CTQ CTQ ACS2450ICALN Ver 0.0 (2007.02.13) 4/20 Page 2.5 방사패턴 Azimuth PlaneElevation 1 PlaneElevation2 Plane ThetaVertical field of measured plane PhiHorizontal field of measured plane Azimuth Theta ACS2450ICALN Ver 0.0 (2007.02.13) 5/20 Page Azimuth Phi Elevation1 Theta ACS2450ICALN Ver 0.0 (2007.02.13) 6/20 Page Elevation1 Phi Elevation2 Theta ACS2450ICALN Ver 0.0 (2007.02.13) 7/20 Page Elevation2 Phi 3. 기구적 특성 - 직방체의 형상을 갖는 유전체 소체에 은(Ag) Paste로 패턴을 형성하여 특성을 구현함 3.1 구조와 재질 Material Dielectric Block (MMS-08) 3D Structure Ag Paste (Metech) Size [mm] W = 3.0±0.1 L = 9.0±0.1 T = 1.2±0.1 Temperature [ °C ]-40~ +80 Humidity [%]At the normal temperature, RH 100 ACS2450ICALN Ver 0.0 (2007.02.13) 8/20 Page 3.2 PCB Layout & Soldering Pad Dimension AB BCA D E F Top LayoutBottom Pattern ParameterABCDEFG Value[mm] 1.11.05.03.21.09.24.2 Unit;mm Unless specified tolerances are ±0.1 3.3 안테나 패턴 도면 Antenna Pattern View Unit;mm Unless specified tolerances are ±0.1 Non-Copper Copper Soldering Pad G F ACS2450ICALN Ver 0.0 (2007.02.13) 9/20 Page Marking View 3.4LOT번호표기법 722 ①②③ ① Year ; 1 - 2001, 2 - 2002, .... 7 - 2007 .... ② Month ; 1 - January, 2 - February .... 9 - September, A - October, B - November .. ③ Date : 1 - 1st , 2 - 2nd .... A - 10th, B - 11th .... 3.5 Marking 사양 ◀LN721 ①②③④⑤ ① Input Signal ② Serial ③ Year; 1 - 2001, 2 - 2002, .... 7 - 2007 .... ④ Month ; 1 - January, 2 - February .... 9 - September, A - October, B - November .... ⑤Date:1-1st,2-2nd....A-10th, B-11th.... ACS2450ICALN Ver 0.0 (2007.02.13) 10/20 Page 4. 시험 방법 4.1 SWR/Returnloss Network Analyzer를 이용하여 SWR/Returnloss 를 측정하며 표본 SPL을 선별 Test Fixture 를 이용 양품과 불량품을 선별한다. Set ConditionTest Fixture Condition 4.2 Gain 당사가 보유한 전파 무반사실에서 상기4.1에서 측정된 Set를 이용하여 Antenna Gain을 측정한다. Anechoic Chamber ACS2450ICALN Ver 0.0 (2007.02.13) 11/20 Page 5. 초기 검사 성적서 검사항목특성 [MHz] 치수 [mm] 규격 VSWR 3.0 Max W=3.0±0.1L=9.0±0.1T=1.2±0.1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 X σ Cpk 판정 OkOkOkOkOk CTQ CTQ ACS2450ICALN Ver 0.0 (2007.02.13) 12/20 Page 6. 신뢰성 보증조건 6.1 환경 시험 항목조건비고 고온방치 +85 °C ±3 °C , 120hr±2hr *시험 후 상온(25°C±5°C)에 서1시간방치후측정한다. *테이블1의 전기적 특성을 만족하여야한다 저온방치 -40 °C ±3 °C , 120hr±2hr 내습시험 +60±3 °C , RH90~95% ,120hr±2hr 6.2 열충격 , REFLOW시험 항목조건비고 열충격 -40°C±3°C/30min ↔ +85°C±3°C/30min cycle : 15 cycle 온도변환시간 : 5min 미만 6-1와 동일 Reflow Pre Heating 200 ± 5 °C ,30 ∼ 60 sec Peak Heating 260 °C± 5 °C ,30secMax 6.3 기계적 시험 항목조건비고 진동시험 주파수: 10~500Hz에서 10 ×9.8㎨(G) Sweep time 15min ,X.Y.Z each 5 times *시험 후 테이블1의 전기적 특성을 만족하여야한다 낙하시험 높이 152㎝에서 각 면 5회 낙하(지그낙 하) 6.4 신뢰성시험성적서 ※ 별첨 ACS2450ICALN Ver 0.0 (2007.02.13) 13/20 Page 7. 납땜 조건 7.1 표준 열경화(Reflow) 조건 preheat 130 ~ 180 90 ∼ 180sec max 30sec 30 ∼ 60sec peak temp. 250 5 0 100 160 200 250 25 time [sec] C C C C C C C C 7.2 수동 납땜 (납땜 인두기를 사용할 경우) 예 열 : 120°C / 시 간 : 60 ∼ 300 sec. 인두온도 : 340°C±5°C / 시 간 : 각 단 최대 5 sec. 8. 주의 사항 8.1 온도 조건 Range of Temperatureunit Application-40 ∼ +85°C Keeping-40 ∼ +85°C 8.2 MSL LEVEL 1 (JEDEC J-STD-020C) Floor LifeSoak Requirements TimeConditionsTimeConditions Unlimited＝＜ 30°C/85%RH168+5/-0＝＜ 85°C/85%RH ACS2450ICALN Ver 0.0 (2007.02.13) 14/20 Page 9.포장 사양 9.1 Carrier/Reel 사양 재질표면저항포장방식 대전 방지용 A-PET Typical 10 8 Ω열압착식 Feeding Direction LN721 Input Marking Model : ACS2450ICALN lllllllllllllllllllllllllllllllllllllllllllllllllllllllllll Quantity ; lllllllllllllllllllllllllllll Lot No llllllllllllllllllllllllllllllllllllll ACS2450ICALN Ver 0.0 (2007.02.13) 15/20 Page 9.2 Box 사양 Material : SK/S/K-B 골판지 P V O # O h y h o # 4 P V O # O h y h o # 4 PVO#Ohyho#4 ACS2450ICALN Ver 0.0 (2007.02.13) 16/20 Page 10. 관리공정도 제품 발행 / 개정 품질관리공정도 관리번호 기안 심의 결정 CHIP ANTENNA Issued Revised 04.04.0605.0…

Text truncated - open the document above for the full version.

DEMC#DR50110705M Copyright ○ c 2007, DIGITAL EMC Co., Ltd. Page 1 of 42 DIGITAL EMC CO., LTD. 683-3, Yubang-Dong, Yongin-Si, Kyunggi-Do, Korea. 449-080 Tel: +82-31-321-2664 Fax: +82-31-321-1664 http://www.digitalemc.com CERTIFICATION OF COMPLIANCE Elentec CO., LTD. 337-17 Wonchun-Dong, Youngtong-gu, Suwon-city, Kyunggi-do, Korea Dates of Tests: April 27 ~ May 10, 2007 Test Report S/N: DR50110705M Test Site : DIGITAL EMC CO., LTD. FCC ID APPLICANT FCC Classification : Frequency Hopping Spread Spectrum (FHSS) Device name : Portable Multimedia Player with Bluetooth Manufacturer : Elentec CO., LTD. FCC ID : UF8N4410 Model name : N4410 Test Device Serial number : Identical prototype FCC Rule Part(s) : FCC Part 15.247 Subpart C ANSI C-63.4-2003 Frequency Range : 2402 ~ 2480 MHz Max. Output power : 3.61 dBm Conducted Data of issue : May 15, 2007 I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. UF8N4410 Elentec CO., LTD. DEMC#DR50110705M Copyright ○ c 2007, DIGITAL EMC Co., Ltd. Page 2 of 42 TABLE OF CONTENTS 1. GENERAL INFORMATION -------------------------------------------------------------------------- 2. INFORMATION ABOUT TEST ITEM ------------------------------------------------------------- 3. TEST REPORT --------------------------------------------------------------------------------------------- 3.1 SUMMARY OF TESTS ------------------------------------------------------------------------------ 3.2 TRANSMITTER REQUIREMENTS --------------------------------------------------------------- 3.2.1 CARRIER FREQUENCY SEPARATION ---------------------------------------------------- 3.2.2 NUMBER OF HOPPING FREQUENCIES -------------------------------------------------- 3.2.3 20 dB BANDWIDTH ---------------------------------------------------------------------------- 3.2.4 TIME OF OCCUPANCY (Dwell Time) ------------------------------------------------------- 3.2.5 PEAK OUTPUT POWER ----------------------------------------------------------------------- 3.2.6 CONDUCTED SPURIOUS EMISSIONS ---------------------------------------------------- 3.2.7 RADIATED EMISSIONS --------------------------------------------------------------------------- 3.2.8 AC LINE CONDUCTED EMISSIONS ------------------------------------------------------- APPENDIX TEST EQUIPMENT FOR TESTS -------------------------------------------------------- 3 4 5 5 6 6 8 11 14 18 21 28 35 40 DEMC#DR50110705M Copyright ○ c 2007, DIGITAL EMC Co., Ltd. Page 3 of 42 1. General information This report contains the result of tests performed by: DIGITAL EMC CO., LTD. Address : 683-3, Yubang-Dong, Yongin-Si, Kyunggi-Do, Korea. 449-080 http://www.digitalemc.com E-mail : [email protected] Tel: +82-31-321-2664 Fax: +82-31-321-1664 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competent of calibration and testing laboratory”. This laboratory is accredited by NVLAP for NVLAP Lab. Code : 200559-0. Test operator: engineer May 15,2007 Won-Jung LEE Data Name Signature Report Reviewed By: manager May 15,2007 Harvey Sung Data Name Signature Ordering party: Company name : Elentec Co., LTD Address : 337-17 Wonchun-Dong, Youngtong-gu, Suwon-city City/town : Kyunggi-Do Country : Korea Zip code : 443-822 Date of order : March 29, 2007 DEMC#DR50110705M Copyright ○ c 2007, DIGITAL EMC Co., Ltd. Page 4 of 42 2. Information about test item UF8N4410 2.1 Equipment information Equipment model no. N4410 Equipment serial no. Identical prototype Type of equipment Portable Multimedia Player with Bluetooth Frequency band 2402 ~ 2480 MHz Type of Modulation GFSK Channel Access Protocol Frequency Hopping Channel Spacing 1.0 MHz Type of antenna Chip Antenna 2.2 Tested frequency Frequency TX RX Low frequency 2402MHz 2402MHz Middle frequency 2441MHz 2441MHz High frequency 2480MHz 2480MHz 2.3 Tested environment Temperature : 15 ~ 35 ( o C) Relative humidity content : 20 ~ 75 % Air pressure : 86 ~ 103 kPa Details of power supply : 5.0 VDC 2.4 Ancillary Equipment Equipment Model No. Serial No. Manufacturer Earphone N/A N/A Termination USB N/A N/A Termination Adaptor 061-052000-EF 000000 Xiang Fa Electronics(D.G)Co.,Ltd 2.5 EMI Suppression Device(s)/Modifications EMI suppression device(s) added and/or modifications made during testing -> None DEMC#DR50110705M Copyright ○ c 2007, DIGITAL EMC Co., Ltd. Page 5 of 42 3. Test Report 3.1 Summary of tests FCC Part Section(s) Parameter Limit Test Condition Status (note 1) I. Test Items 15.247(a) Carrier Frequency Separation > 25 kHz Conducted C Number of Hopping Frequencies > 75 hops C 20 dB Bandwidth < 1 MHz C Dwell Time 0.4 seconds within a 30 second period per any frequency C 15.247(b) Transmitter Output Power < 1Watt C 15.247(c) Band-edge /Conducted The radiated emission to any 100 kHz of outband shall be at least 20dB below the highest inband spectral density. C Conducted Spurious Emissions C 15.205 15.209 Radiated Emissions FCC 15.209 Limits Radiated C 15.207 AC Conducted Emissions EN 55022 AC Line Conducted C Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable The sample was tested according to the following specification: FCC Parts 15.247; ANSI C-63.4-2003 DEMC#DR50110705M Copyright ○ c 2007, DIGITAL EMC Co., Ltd. Page 6 of 42 3.2 Transmitter requirements 3.2.1 Carrier Frequency Separation Procedure: The carrier frequency separation was measured with a spectrum analyzer connected to the antenna terminal, while EUT had its hopping function enabled. After the trace being stable, the reading value between the peaks of the adjacent channels using the marker-delta function was recorded as the measurement results. The spectrum analyzer is set to: Span = 3 MHz (wide enough to capture the peak…

Text truncated - open the document above for the full version.

FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 1 FCC ID: UF8N4410 Copyright Ⓒ 2007, DIGITAL EMC Co., Ltd. View 2