UK2-SII-SK63101wirelesshd receiver

Quick Start Guide – OEM Installation SiI-SK63101 and SiI-SK63102 Quick Start Guide – OEM Installation SiI-63101 and SiI63102 Quick Start Guide – OEM Installation Silicon Image, Inc. ii ©2012 Silicon Image, Inc. All rights reserved. CONFIDENTIAL May 2012 Copyright Notice Copyright ©2012 Silicon Image, Inc. All rights reserved. The contents of these materials contain proprietary and confidential information (including trade secrets, copyright, and other Intellectual Property interests) of Silicon Image, Inc. or its affiliates. All rights are reserved and contents, (in whole or in part) may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior written permission of Silicon Image, Inc. or its affiliates. You may not use these materials except only for your bona fide non-commercial evaluation of your potential purchase of products and/or services from Silicon Image or its affiliates; and only in connection with your purchase of products or services from Silicon Image or its affiliates, and only in accordance with the terms and conditions stipulated. Copyright infringement is a violation of federal law subject to criminal and civil penalties. You have no right to copy, modify, transfer, sublicense, publicly display, create derivative works of, distribute these materials, or otherwise make these materials available, in whole or in part, to any third party. Patents The subject matter described herein may contain one or more inventions claimed in patents or patents pending owned by Silicon Image, Inc. or its affiliates. Trademark Acknowledgment Silicon Image ® , the Silicon Image logo, SteelVine ® , Simplay ® , Simplay HD ® , the Simplay HD logo, Satalink ® , InstaPort ® , the InstaPort Logo, and TMDS ® are trademarks or registered trademarks of Silicon Image, Inc. in the United States or other countries. HDMI ® and the HDMI logo with High-Definition Multimedia Interface are trademarks or registered trademarks of, and are used under license from, HDMI Licensing, LLC. in the United States or other countries. MHL ® and the MHL Logo are trademarks or registered trademarks of, and are used under license from, MHL, LLC. in the United States or other countries. All other trademarks and registered trademarks are the property of their respective owners in the United States or other countries. The absence of a trademark symbol does not constitute a waiver of Silicon Image’s trademark or other intellectual property rights with regard to a product name, logo or slogan. Export Controlled Document This document contains information subject to the Export Administration Regulations (EAR) and has a classification of EAR99 or is controlled for Anti-Terrorism (AT) purposes. Transfer of this information by any means to an EAR Country Group E:1 or foreign national thereof (whether in the U.S. or abroad) may require an export license or other approval from the U.S. Department of Commerce. For more information, contact the Silicon Image Director of Global Trade Compliance. Further Information To request other materials, documentation, and information, contact your local Silicon Image, Inc. sales office or visit the Silicon Image, Inc. web site at www.siliconimage.com. Revision History Revision Date Comment 0.80 05/2012 Preliminary release. ©2012 Silicon Image, Inc. All rights reserved. SiI-63101 and SiI63102 Quick Start Guide – OEM Installation Silicon Image, Inc. ©2012 Silicon Image, Inc. All rights reserved. iii CONFIDENTIAL Table of Contents Getting Started .............................................................................................................................................................. 2 SiI-SK63101 SiI-SK63102 module pair description. ................................................................................................... 3 WirelessHD module/Adapter Connection Diagram. .................................................................................................... 4 SiI-SK63101 & SiI-SK63102 Specifications: ................................................................................................................. 5 Interference Statement ................................................................................................................................................... 6 USA-Federal Communications Commission (FCC) .................................................................................................... 6 Note for system integrators .................................................................................................................................... 6 Label of the end product: ....................................................................................................................................... 6 Canada – Industry Canada (IC) .................................................................................................................................. 6 Note for System Integrators.................................................................................................................................... 7 Label of the end product: ....................................................................................................................................... 7 Europe - EU Declaration of Conformity and Restrictions............................................................................................ 7 CE RF Radiation Exposure Statement: ................................................................................................................... 8 Note for system integrators: ................................................................................................................................... 8 Marking/Labelling information ...................................................................................................................................... 9 Proposed Label and Location for SiI-SK63101 Receiv…

Text truncated - open the document above for the full version.

4/30/2012 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: UK2-SII-SK63101 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until for 180 days. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Mahesh Kiwalkar WirelessHD & RF Compliance Manager Staff Applications Engineer - RF Silicon Image

Applicant/Grantee SILICON IMAGE FCC ID: UK2-SII-SK63101 Section 15.212 Modular Receivers Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Device is equipped with metal shielding to cover RF section. Refer to external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. All inputs to the module are buffered through logic or microprocessor inputs. Y 3 The modular transmitter must have its own power supply regulation. Internal 1.0V and 1.2V power regulation provided. Refer to Block diagram. Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Antenna requirements met. Refer to antenna specification provided and test report. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Condition satisfied – Module tested in stand-alone configuration and is not inside another case during testing. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. Labeling requirements met – see photos. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Yes Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. See test report for maximum permissible exposure reported. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured.

Proposed Label and Location Proposed Label and Location for Host Device SILICON IMAGE Model: SII-SK63101 FCC: UK2-SII-SK63101 IC: 6705A- SIISK63101 Bottom of Module Label Location This device contains Model: SII-SK63101 FCC: UK2-SII-SK63101 IC: 6705A- SIISK63101

REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 40 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 8. RF EXPOSURE FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 41 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. IC RULES IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when averaged spatially and over time, or if the power density exceeds the value given in Column 4 of Table 5, when averaged spatially and over time. REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 42 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. CALCULATIONS EIRP is converted to Power Density using the equation: P D = EIRP / (4 * Pi * D S ^2) where: D S is the separation distance RESULTS Average Average SeparationPowerICPowerFCC EIRPEIRPDistanceDensityLimitDensityLimit (dBm)(W)(cm)(W/m^2) (W/m^2) (mW/cm^2) (mW/cm^2) 11.60.014200.03100.0031

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 INDUSTRY CANADA RSS-102 ISSUE 4 CERTIFICATION TEST REPORT FOR 60GHz WIRELESSHD RECEIVER MODEL NUMBER: SII-SK63101 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 REPORT NUMBER: 12U14407-2, Revision A ISSUE DATE: MAY 21, 2012 Prepared for SILICON IMAGE 1140 EAST ARQUES AVE SUNNYVALE, CA 94085, U.S.A. Prepared by COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 12U14407-2A DATE: MAY 21, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 2 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Revision History Rev. Issue Date Revisions Revised By -- 05/07/2012 As Issued M. Heckrotte A 05/21/12 Revised EUT description A. Zaffar REPORT NO: 12U14407-2A DATE: MAY 21, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 3 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION .................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .................................................................................. 5 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 5 4.2. MEASUREMENT UNCERTAINTY ................................................................................. 5 5. EQUIPMENT UNDER TEST ................................................................................................. 6 5.1. DESCRIPTION OF EUT ................................................................................................. 6 5.2. OUTPUT POWER .......................................................................................................... 6 5.3. SOFTWARE AND FIRMWARE ...................................................................................... 6 5.4. WORST-CASE CONFIGURATION AND MODE ............................................................ 6 5.5. DESCRIPTION OF TEST SETUP .................................................................................. 7 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................... 9 7. APPLICABLE LIMITS AND TEST RESULTS .................................................................... 10 7.1. 6 dB BANDWIDTH ....................................................................................................... 10 7.1.1. Results for LRP Channels ..................................................................................... 10 7.2. 99% and 26 dB BANDWIDTH ...................................................................................... 13 7.2.1. Results for LRP Channels ..................................................................................... 13 7.3. POWER DENSITY ....................................................................................................... 16 7.3.1. Results for LRP Channels ..................................................................................... 18 7.1. PEAK OUTPUT POWER .............................................................................................. 24 7.1.1. Results for LRP Channels ..................................................................................... 25 7.2. SPURIOUS EMISSIONS .............................................................................................. 26 7.3. AC MAINS LINE CONDUCTED EMISSIONS .............................................................. 33 7.4. FREQUENCY STABILITY ............................................................................................ 37 7.5. GROUP INSTALLATION .............................................................................................. 38 7.6. TRANSMITTER IDENTIFICATION............................................................................... 39 8. RF EXPOSURE ................................................................................................................... 40 9. SETUP PHOTOS ................................................................................................................. 43 REPORT NO: 12U14407-2A DATE: MAY 21, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 4 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SILICON IMAGE 1140 EAST ARQUES AVE SUNNYVALE, CA, 94085, U.S.A. EUT DESCRIPTION: 60GHz WIRELESSHD RECEIVER MODEL: SII-SK63101 SERIAL NUMBER: a2:ef:a1:8a:53:50 DATE TESTED: APRIL 18 TO MAY 1, 2012 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C Pass INDUSTRY CANADA RSS-210 Issue 8 Annex 13 Pass INDUSTRY CANADA RSS-102 Issue 4 Pass Compliance Certification Services (UL CCS) tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL CCS based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance wit…

Text truncated - open the document above for the full version.

REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 43 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 9. SETUP PHOTOS RADIATED MEASUREMENT SETUP FRONT VIEW BACK VIEW REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 44 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. TEMPERATURE CHAMBER MEASUREMENT SETUP CLOSE UP VIEW REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 45 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. LINE CONDUCTED EMISSIONS SETUP FRONT VIEW REPORT NO: 12U14407-2 DATE: MAY 7, 2012 FCC ID: UK2-SII-SK63101 IC: 6705A-SIISK63101 Page 46 of 46 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. END OF REPORT BACK VIEW