URGT21122INDOOR EQUIPMENT LOCATION SYSTEM

Copyright © RadarFind Corp 2008 A-Tag Models T11-122 – Status & T21-122 – Non Status RTLS Tags Installation Instructions RadarFind™ Corporation 877-RadarFind (723-2734) www.radarfind.com Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 2 Copyright © RadarFind Corp 2009 Warnings: It is important to follow all instructions shipped with this product. UNPACKING: After unpacking the unit, examine it for damage that may have occurred in transit. If the equipment has been damaged, do not attempt to install or operate it. File a claim immediately with the carrier stating the extent of the damage, or contact RadarFind customer service for repair or replacement. Read and understand all instructions before installing or operating this equipment. The selection of the mounting location for the device is to be accomplished under the direction of the director of Clinical Engineering and conform to all company policies, and must be in accordance with specifications in the sub-chapter for each device type. CAUTION: Risk of malfunction. Install these devices only in areas with an ambient temperature between 0° and 50°C. [15.19] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [15.21] Information to user: Changes or modifications not expressly approved by the RadarFind Corporation could void the user's authority to operate the equipment [15.105] NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [15.249] This equipment operates under Section 15.249 of the Title 47 FCC Rules. This product protected by one or more of the following U.S. Patents: 7372365, 7525432 & 7528716. Other patents pending. Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 3 Copyright © RadarFind Corp 2009 Contents of standard package: Either (1) T21-122 - A-Non status Tag or (1) - T11-122 – A-Status Tag (1) 80-100-1003 A-Tag Mounting Base (1) 80-000-1001 – Adhesive Pad Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 4 Copyright © RadarFind Corp 2009 Accessories A12-3T00 (2) Stainless steel mounting straps (for application of Radarfind tag mounting base (Part# TBA-3160) to tubular structures) Note: For best performance the steel straps require a special tool to tighten and cut the strap. Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 5 Copyright © RadarFind Corp 2009 General Guidelines: All tags on an asset type should be the same type, e.g. all infusion pumps should have an A-Status Type tag. Select a standard location on each asset type for the tag. For A-Status tags select a location where the status indicator is plainly visible and can be easily accessed by the user when switching the status switch. Be sure to choose a place where the tag is protected from physical impacts when the device is being used or transported. Example Status tag placement The tag location should not interfere with normal use of the asset, and have sufficient clearance on the open end of the base to insert the locking base key and insert and remove the tag. For best performance do not place the tag in a location covered with metal, such as inside of a control box or enclosed area under a bed frame. Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 6 Copyright © RadarFind Corp 2009 Using adhesive pad – Clean the area on the asset with alcohol to ensure a good bond. Remove white side of the adhesive covering and place on tag base, aligning the hole in the center of the adhesive over the base locking mechanism. Remove red backing and apply to asset. (Be sure to leave sufficient clearance at the open end of the base to insert and remove the tag from the base) Adhesive Orientation Apply adhesive to base 1st Adhesive mounting tips for curved surfaces: If the target location is not completely flat you may need to add strips under the ends of the adhesive pad (cut the strips from a spare pad) Building up adhesive to conform to curved substrates Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 7 Copyright © RadarFind Corp 2009 Auxiliary attachment: Use a standard plastic “Tie-Rap” to attach the tag base to permanently mounted cords or handles of assets where there is no convenient flat mounting spot. Use tie-rap to attach tag to oddly shaped assets Mounting to tubular fixtures: Use stainless steel straps to attach tag to tubes or poles. For best results mounting to tubular fixtures, such as IV poles or wheelchair frames, the locking base is equipped with strapping holes. These holes are designed to be used with thin stainless steel straps, available from Radarfind ( Part # A12-3T00 ) or Panduit: http://www.panduit.com/search/search_results.asp?Ne=1&recName=MLT1S%2DCP&N=50 00001+336+3000858+&region=USA Note: that the best results are obtained by using the strapping gun designed for these steel straps. Radarfind Corporation 8/25/2010 A-Tag Installation Instructions Page 8 Copyright © RadarFind Corp 2009 Installation Steps – Attaching tags with adhesive: Step # 1 - Select location for tag and clean area for adhesive with alcohol. Step # 2 - Attach adhesive to tag base with adhesive or straps. Step # 3 – (Assuming that you hav…

Text truncated - open the document above for the full version.

September 15th, 2 010 Federal Communications Commission Office of Engineering Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Permanent Confidentiality Request for FCC IDs: URGT21122, URGT11122, URGT42140, URGT33110, URGR221012, and URGR224012 Dear Sir or Madam: RadarFind Corporation respectfully requests that the following exhibits accompanying this application be made permanently confidential and withheld from public disclosure: • Theory of Operation / Technical Description • Circuit Schematics • Bill of Materials / Parts List • Block Diagram • Tune-Up Procedure RadarFind Corporation al so requests that the following documents accompanying this application be made temporarily confi denti al for 180 days: • Installation or user operation manuals • Internal photographs RadarFind also understands that the following exhibits are not confidential: • Form 731 • External product photographs, label location photographs or label “artwork” drawings • EMC test lab reports or test lab setup photographs Sincerely, Stephen C. Snell, Hardware Manager RadarFind Corporation SCS / g w r RadarFind Corporation 2100 Gateway Centre Blvd. Suite 150 Morrisville, NC 27560-6230 (919) 228-2100 office (919) 287-2483 fax www.radarfind.com

RadarFind Corporation Page 1 of 1 FCC Exhibit F C C I D : U RGT 21122 Product: Tag Model T21-122 Date: 2010/08/26 R e v i s i o n : 1 External Device Photograph

RadarFind Corporation P a g e 1 o f 2 FCC Exhibit FCC ID: URGT21122 Product: Tag model T21-112 Date: 2/9/2010 Revision: 1 FCC ID Label Artwork The following page is the drawing detailing the FCC ID label for this product.

RadarFind Corporation P a g e 1 o f 2 FCC Exhibit FCC ID: URGT21122 Product: Tag Model T21-122 Date: 2010/08/26 R e v i s i o n : 1 FCC ID Label Location Photograph RadarFind Corporation P a g e 1 o f 2

RadarFind Corporation Page 1 of 1 FCC Exhibit F C C I D : U RGT 21122 Product: Tag Model T21-122 Date: 2010/08/26 R e v i s i o n : 1 Internal Device Photographs

Underwriters Laboratories Inc. 12 Laboratory Dr. Research Triangle Park, NC 27709 www.ul.com/emc (919) 549-1400 Lab Number: 10LB048 Project Number: 10RT02887 File Number: MC15465 Date: July 22, 2010 Models: Tag Model T21-122 (FCC ID: URGT21122) Electromagnetic Compatibility Test Report For RadarFind Corp. Raleigh, NC Copyright  2010 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. Underwriters Laboratories Inc. A not-for-profit organization dedicated to public safety and committed to quality service for over 100 years 12 Laboratory Dr. Research Triangle Park, NC 27709 Tel: (919) 549-1400 Project Number: 10RT02887 File Number: MC15465 Page 2 of 24 Model Number: Tag Model T21-122 Client Name: RadarFind Corp. FCC ID: URGT21122 Test Report Details Tests Performed By: Underwriters Laboratories Inc. 12 Laboratory Dr. Research Triangle Park, NC 27709 Tests Performed For: RadarFind Corporation A TeleTracking Technologies Company 2100 Gateway Centre Blvd., Suite 150 Morrisville, NC 27560 Applicant Contact: Mr. Steve Snell Title: Director, Hardware Engineering Phone: (919) 228-2170 E-mail: [email protected] Test Report Date: July 15, 2010 Product Type: Low-Powered Transmitter Product standards FCC Part 15, Subpart C, 15.249 Model Number: Tag Model T21-122 Sample Serial Number: Unserialized production samples EUT Category: Frequency Hopping Spread Spectrum Transmitter Testing Start Date: July 6, 2010 Date Testing Complete: July 12, 2010 Overall Results: Compliant Underwriters Laboratories Inc. reports apply only to the specific samples tested under stated test conditions. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. Underwriters Laboratories Inc. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from Underwriters Laboratories Inc. issued reports. This report shall not be used to claim, constitute or imply product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the US government. This report may contain test results that are not covered by the NVLAP or A2LA accreditation. The scope of accreditation is limited to the specific tests that are listed on the NVLAP and/or A2LA websites referenced at the end of this report. Underwriters Laboratories Inc. 12 Laboratory Dr. Research Triangle Park, NC 27709 USA Tel.: 919 549-1400 Rev. No 1.0 EMC Report 2010-87-EM-F0042 Project Number: 10RT02887 File Number: MC15465 Page 3 of 24 Model Number: Tag Model T21-122 Client Name: RadarFind Corp. FCC ID: URGT21122 Report Directory 1.0 G E N E R A L - Product Description................................................................................................................4 1.1 Equipment Description.................................................................................................................................4 1.2 Equipment Marking Plate.............................................................................................................................4 1.3 Device Configuration During Test................................................................................................................5 1.3.1 Equipment Used During Test:..................................................................................................................5 1.3.2 Input/Output Ports:...................................................................................................................................5 1.3.3 EUT Internal Operating Frequencies:......................................................................................................6 1.3.4 Power Interface:.......................................................................................................................................6 1.4 Block Diagram:.............................................................................................................................................7 1.5 Description of X and Y Axis Product Orientations........................................................................................7 1.6 EUT Configurations......................................................................................................................................7 1.7 EUT Operation Modes..................................................................................................................................8 2.0 Summary..........................................................................................................................................................9 2.1 Deviations from standard test methods........................................................................................................9 2.2 Device Modifications Necessary for Compliance.........................................................................................9 2.3 Reference Standards...................................................................................................................................9 2.4 Results Summary.........................................................................................................................................9 2.5 Test Scope...................................................................................................................................................9 3.0 Calibration of Equipment Used for Measurement..........................................................................................10 4.0 EMISSIONS TEST RESULTS........................................................................................................................10 4.1 Test Conditions and Results – RADIATED POWER / RADIATED SPURIOUS EMISSIONS.…

Text truncated - open the document above for the full version.

Job Number: 10RT02887 File Number: MC15465 Page 1 of 1 Model Number: Tag Model T21-122 Client Name: Radarfind Corp. FCC ID: ARGT21122 1.1.1 Radiated Spurious Emissions – Tag #3 (Model T21-122) Figure 1 Test setup photo for Radiated Emissions (Tag #3, X-Y Orientation)