USH00002Cart Security Transmitter

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Equipment Authorization Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Re: Request of Confidentiality for FCC ID#: USH00002 Pursuant to Sections 0.457(d)(I)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying as outlined below: • 50034-001 BOM • 50034-001 Schematic • Operational Description • Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(I)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely,

8.19 26.94 NOTES: 1. ASSEMBLE AS SHOWN. 2. ATTACH LABELS PRIOR TO COVER ASSEMBLY. 3. HAND WRITE FIRMWARE REVISION IN PERMANENT BLACK INK ON FIRMWARE LABEL FOR FIRMWARE LOADED. 5.37 A 1 VIEW ABOVE SHOWN WITHOUT RF SHIELD DETAIL A SCALE 1 : 2 3 2 SUPPLIED POLE COVER AUXILARY VIEW SCALE 1 : 16 1 REVISIONS REV.DESCRIPTIONDATEAPPROVED AINITIAL RELEASE1/08/2007 BCHANGED LABEL LOCATION1/22/2007 CADDED AUXILLARY VIEWS, CHANGE ITEM 1 QTY5/02/2007 MATERIAL: FINISH: THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION. DO NOT DISCLOSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY CARTTRONICS. APPROVALS MONTH/DAY/YR DRAWN ENGINEER ENGINEERING CHECKER MFG ENG REGULATORY PICTORIAL, INTERNALS, OVAL NSC BATTERY POLE, LABEL PLACEMENT SIZE B SCALE SH 1 OF 2 REV. DWG. NO. DO NOT SCALE DRAWING THIRD ANGLE PROJECTION SEE NOTES SEE NOTES 1:8 50650-000 C 50650-000-C-labelsplacement A. ARCE SEED -- -- -- -- 08/11/06 08/11/06 -- -- -- -- CARTTRONICS PDM FILENAME C UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. TOLERANCES: X .125 ANGLES: X.X 1 X.X .02 X.XX .01 X.XXX .005 50650-000 REV: C TITLE (760) 707-1270 WWW.CARTTRONICS.COM 2042 CORTE DEL NOGAL, CARLSBAD, CA, USA 1.6 1.0 INSTALL PRODUCT INFORMATION LABEL IN APPROXIMATE LOCATION SHOWN. A A 1.0 .4 1.1 .9 .08 .08 SECTION A-A SCALE 1 : 2 INSTALL REF. FIRMWARE REVISION LABEL 50631-001 IN APPROXIMATE LOCATIONS SHOWN. 2. 3. INSTALL SERIAL NUMBER LABEL IN APPROXIMATE LOCATION SHOWN. 2. 1.5 AUXILARY VIEW SCALE 1 : 16 INSTALL PRODUCT INFORMATION LABEL IN APPROXIMATE LOCATION SHOWN. THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION. DO NOT DISCLOSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY CARTTRONICS. PICTORIAL, INTERNALS, OVAL NSC BATTERY POLE, LABEL PLACEMENT SIZE B SCALE SH 2 OF 2 REV. DWG. NO. 1:4 50650-000 C 50650-000-C-labelsplacement (760) 707-1270 WWW.CARTTRONICS.COM CARTTRONICS PDM FILENAME C 50650-000 REV: C TITLE

CARTTRONICS TX0, Battery Powered Pole, Internal Assy p/n 61008-005 RATING: 0.1 Amp 12 VDC MADE IN USA NO USER SERVICABLE PARTS IC: 6834A-00002 PX01 FCC ID: USH00002 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 50488-001 rev. C rev.

Nemko USA, Inc. 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 Phone (858) 755-5525 Fax (858) 452-1810 FCC Part 15 Subpart C, 15.249 : 15/02/2008 Test Report: 2007 031019 PX01 FCC Project number: 26-1019-EXPR1 Applicant: Carttronics LLC 2042 Corte Del Nogal Suite C Carlsbad, CA 92011 Equipment Under Test (EUT): No Saw Cut (NSC) Transmitter Model: PX01 In Accordance With: FCC Part 15 Subpart C, 15.249 CANADA, IC RSS-Gen, IC RSS 210 FCC ID# USH00002 IC ID# 6834A-00002 Tested By: Nemko USA Inc. 11696 Sorrento Valley Road, Suite F San Diego, CA 92121 Authorized By: Michael T. Krumweide, EMC Supervisor Date: JUNE 7, 2007 Total Number of Pages: 29 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 IC # 6834A-00002 Report Number: 2007 031019 PX01 FCC FCC ID# USH00002 Specification: FCC Part 15 Subpart C, 15.249 Page 2 of 30 Section 1. Summary of Test Results General All measurements are traceable to national standards These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15; Subpart C. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. This Radio Standards Specification (RSS) sets out the requirements for license exempt low-power intentional radiators. The applicable standard for low-power intentional radiators in Canada, corresponding to FCC Part 15 Subpart C, is RSS-210. The two are very closely harmonized in terms of permitted frequencies, types of operation, and other technical requirements. The test results reported in this report are deemed satisfactory evidence of compliance with Industry Canada Standard RSS-210. The assessment summary is as follows: Apparatus Assessed: No Saw Cut (NSC) Transmitter Model PX01 Specification: FCC Part 15 Subpart C, 15.249 IC RSS-Gen (Issue 2, June 2007) IC RSS 210 (Issue 7. June 2007) Compliance Status: Complies Exclusions: None Non-compliances: None Report Release History: REVISION DATE COMMENTS - June 7, 2007 Prepared By: Ferdinand S. Custodio - June 7, 2007 Initial Release: Mike T. Krumweide Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 IC # 6834A-00002 Report Number: 2007 031019 PX01 FCC FCC ID# USH00002 Specification: FCC Part 15 Subpart C, 15.249 Page 3 of 30 Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. TESTED BY: ___________________________________ Date: June 7, 2007 Ferdinand S. Custodio, EMC Test Engineer Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 IC # 6834A-00002 Report Number: 2007 031019 PX01 FCC FCC ID# USH00002 Specification: FCC Part 15 Subpart C, 15.249 Page 4 of 30 TABLE OF CONTENTS Section 1. Summary of Test Results...............................................................................2 Section 2: Equipment Under Test..........................................................................................5 2.1 Product Identification..............................................................................................................5 2.2 Samples Submitted for Assessment.........................................................................................5 2.3 Theory of Operation................................................................................................................6 2.4 Technical Specifications of the EUT.........................................................................................6 2.5 Block Diagram........................................................................................................................7 Section 3: Test Conditions......................................................................................................8 3.1 Specifications.........................................................................................................................8 3.2 Deviations From Laboratory Test Procedures...........................................................................8 3.3 Test Environment...................................................................................................................8 3.4 Test Equipment......................................................................................................................9 Section 4: Observations.........................................................................................................10 4.1 Modifications Performed During Assessment..........................................................................10 4.2 Record Of Technical Judgements..........................................................................................10 4.3 EUT Parameters Affecting Compliance..................................................................................10 4.4 Tests Deleted.......................................................................................................................10 4.5 Additional Observations........................................................................................................10 Section 5: Results Summary.................................................…

Text truncated - open the document above for the full version.