UTCAP300E-001IP-DECT access point with optional G7A - G.729 compression and external antennas

AP300 All Types Installation Manual Issue: 03-03-2010 A publication of NEC Unified Solutions HILVERSUM, THE NETHERLANDS Part No ................ : 3522 009 12842 Order number ..... : 9600 069 42002 Date .................... : March 2010 Great care has been taken to ensure that the information contained in this handbook is accurate and complete. Should any errors or omissions be discovered or should any user wish to make a suggestion for improving this handbook, he is invited to send the relevant details to: NEC Unified Solutions P.O. BOX 32 1200 JD HILVERSUM THE NETHERLANDS  NEC Unified Solutions, 2010 All rights are reserved. Reproduction in whole or in part is prohibited without written consent of the copyright owner. Important The equipment described in this manual should be installed and maintained only by professional and qualified engineers in accordance with the procedures and instructions described in this manual. Regulatory information European Union Declaration of Conformity Hereby, “NEC Unified Solutions”, declares that this “AP300” is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
http://www.nec-unified.com/doc Product disposal information The symbol depicted here has been affixed to your product in order to inform you that electrical and electronic products should not be disposed of as municipal waste. Electrical and electronic products including the cables, plugs and accessories should be disposed of separately in order to allow proper treatment, recovery and recycling. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available. Separate disposal has significant advantages: valuable materials can be re-used and it prevents the dispersion of unwanted substances into the municipal waste stream. This contributes to the protection of human health and the environment. Please be informed that a fine may be imposed for illegal disposal of electrical and electronic products via the general municipal waste stream. In order to facilitate separate disposal and environmentally sound recycling arrangements have been made for local collection and recycling. In case your electrical and electronic products need to be disposed of please refer to your supplier or the contractual agreements that your company has made upon acquisition of these products. For countries outside the European Union Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement has been made with your supplier, please contact the local authorities for further information. Regulatory information United States This device contains functions which are not operational in US territories This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the equipment. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help.” Privacy of communications may not be ensured when using this equipment. Exposure to Radio Frequency (RF) Signals: This base station is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the OET Bulletin 65 Supplement C. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device with internal antennas must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Regulatory information Canada Operation of this device is subject to the following two conditions: (1) this device may not cause any interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Exposure to Radio Frequency (RF) Signals: This wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the Ministry of Health (Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines are based on the safety standards previously set by international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating…

Text truncated - open the document above for the full version.

Federal Communications Commission Date: 2010-07-28 Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act in accordance with our instructions and on our behalf in all matters relating to applications for equipment authorization of our equipment AP300E, FCC ID: UTCAP300E-001 including the signing of all documents relating to these matters. Any and all associated acts carried out by Eurofins Product Service GmbH shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name : F. Dosil Title : Advisor Regulatory Compliance Company : NEC Unified Solutions B.V. NEC Unified Solutions B.V. Anton Philipsweg, 1223 KZ Hilversum, P.O.Box32, 1200 JD Hilversum, The Netherlands Phone: +31 (0)35 689 91 11, Fax: +31 (0)35 689 14 50 www.nec-unified.com

Federal Communications Commission Date: 2010-07-28 Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality NEC Unified Solutions B.V. FCC ID: UTCAP300E-001 FCC Part 15 Certification Dear sir or madam, In accordance with 0.459 of CFR 47, NEC Unified Solutions B.V. hereby request infinite confidentiality of the following files and contents for the subject application: - Schematic diagrams and part list File : 13_AP300E Schem - Part list File : 16_AP300E PartsLst These documents contain detailed system and equipment descriptions and related information about the product which NEC Unified Solutions B.V. considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Infinite confidentiality is also requested for the listed installation manual, because it contains information which should only be available to qualified and trained personnel. Since the design of this product is a basis from which future technological products will evolve, NEC Unified Solutions B.V. considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Name: F. Dosil Title: Advisor regulatory compliance Company: NEC Unified Solutions B.V. NEC Unified Solutions B.V. Anton Philipsweg, 1223 KZ Hilversum, P.O.Box32, 1200 JD Hilversum, The Netherlands Phone: +31 (0)35 689 91 11, Fax: +31 (0)35 689 14 50 www.nec-unified.com

Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Annex APictures Page 48 of 179 Extern Photos FCC ID: UTCAP300E-001 IC ID: 140Q-AP300E01

Product Labels AP300E 110– 001 / 1 of 2 010 A4 Date : 13-08-2010 NEC Unified Solutions B.V. Hilversum    NEC Unified Solutions B.V. All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. (60mm) Label A (60mm) Label B Material: Silver polyester, t/c glossy, permanent sticky Note: Only use CSA/UL recognized material and ink for this label. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (30) 36-57Vdc 150mA max AP300E Made in Spain Type number: 9600 039 13102 Mac address: xx.xx.xx.xx.xx.xx Serial number: SOxxxxxxxx Datecode: yymmdd 233349 FCC ID: UTCAP300E-001 IC: 140Q-AP300E01 N3345 NEC Unified Solutions B.V. Product Labels AP300E 110– 001 / 2 of 2 010 A4 Date : 13-08-2010 NEC Unified Solutions B.V. Hilversum    NEC Unified Solutions B.V. All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. (60mm) Label C Material: Silver polyester, t/c glossy, permanent sticky Note: Only use CSA/UL recognized material and ink for this label. 36-57Vdc 150mA max AP300E Made in Spain 233349 FCC ID: UTCAP300E-001 IC: 140Q-AP300E01 IP DECT ACCESS POINT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NEC Unified Solutions B.V.

Label location information AP300E A : Label with FCC ID and detailed manufacturer information B : Label with statement according Part 15.19(a).(3) C : Label with FCC ID and manufacturer informat ion (back side)   NEC Unified Solutions B.V. All rights are reser ved. Reproduction whole or in part is prohibited wit hout the written consent of the copyright owner. Product backside Product backside wall mount B A C

Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 49 of 179 FCC ID: UTCAP300E-001 IC ID: 140Q-AP300E01 Intern Photos Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 50 of 179 Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 51 of 179

Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-102 UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091, 2.1093 and RSS-102, as appropriate. All equipment shall be considered to operate in a “general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, if applicable. Consideration of radio frequency radiation exposure for EUT is done as SAR test acc. IEEE 1528 MPE calculation as below SAR test results: not applicable MPE calculation: Please find radiated power test results in Annex. The EUT is considered as a mobile device according to OET Bulletin 65, Edition – 97 – 01. Therefore distance to human body of min. 20 cm is determined. The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A safety statement concerning minimum separation distances from enclosure of the device will be integrated in the user’s manual to provide end-users with transmitter operating conditions for satisfying RFE exposure compliance. Formula: S = EIRP / 4πR 2 Calculation: EIRP Radiated Power [dBm] 23.67 EIRP Radiated Power [mW] 232.809 R Distance [cm] 20 S Power Density [mW/cm 2 ] 0.05 Limit: The limit of Power density for General Population / Uncontrolled Exposure is 1.0 mW/cm 2 . Compliance with the requirements will be considered by calculation of power density derived from radiated power value. Verdict: Pass Fail Page 23 of 179

EUROFINS PRODUCT SERVICE GMBH Testing Cert #1983.01 TEST - REPORT FCC PART 15 D for Isochronous UPCS devices RSS-213 for LE-PCS devices FCC ID:UTCAP300E-001 IC: 140Q-AP300E01 IP-DECT access point AP300E Test report no.:G0M21007-3464-C-1_rev01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Phone +49-33631-888 00 Germany Fax +49-33631-888 660 Test Report No.: G0M21007-3464-C-1_rev01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany TABLE OF CONTENTS 1 General information 4 1.1 Notes 4 1.2 Testing laboratory 5 1.3 Details of approval holder 5 1.4 Application details 6 1.5 Test item 6 1.6 Test standards 8 2 TECHNICAL TEST 9 2.1 Summary of test results 9 2.2 Test environment 9 2.3 Test equipment utilized 10 3 RESULTS OF EXAMINATIONS AND TESTS 11 3.1. Examinations and Test Procedures 12 3.1.1 Coordination with fixed microwave service, FCC 15.307 (b) 12 3.1.2 Reference to Subpart B, FCC 15.309 (b) 12 3.1.3 Conducted limits AC Power line, FCC 15.315, 15.207; RSS-213 4.2; 6.3 13 3.1.4 Antenna requirement, FCC 15.317, 15.203 14 3.1.5 Modulation techniques, FCC 15.319 (b); RSS-213 6.1 14 3.1.6 Emission bandwidth, FCC 15.323 (a); FCC 15.31 (e); RSS-213 6.4 15 3.1.7 Peak Transmit Power, FCC 15.319 (c); RSS-213 4.3.1, 6:5 18 3.1.8 Power spectral density, FCC 15.319 (d); RSS-213 4.3.1, 6:6 20 3.1.9 Directional gain of the antenna, FCC 15.319 (e); RSS-213 4.1 (e) 21 3.1.10 Automatic discontinuation of transmission, FCC 15.319 (f); RSS-213 4.3.4 (a) 21 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-Gen 5.5 23 3.1.12 Monitoring threshold; Least interfered channel; FCC 15.323 (c)(2); (c)(5) (c)(9); 24 RSS-213 4.3.4 (b)(2) 3.1.13 Monitoring of intended transmit window and maximum reaction time, 27 FCC 15.323 (c)(1); RSS-213 4.3.4 (b)(1) 3.1.14 Monitoring bandwidth, FCC 15.323 (c)(7); RSS-213 4.3.4 (b)(7) 29 3.1.15 Random waiting interval, FCC 15.323 (c)(6); RSS-213 4.3.4 (b)(6) 30 Test Report No.: G0M21007-3464-C-1_rev01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany 3.1.16 Duration of transmission, FCC 15.323 (c)(3); RSS-213 4.3.4 (b)(3) 31 3.1.17 Connection acknowledgement, Unacknowledged transmissions, FCC 15.323 (c)(4); 32 RSS-213 4.3.4 (b)(5) 3.1.18 Selected channel confirmation, Segment occupancy; FCC 15.323 (c)(5) 33 3.1.19 Monitoring antenna, FCC 15.323 (c)(8); RSS-213 4.3.4 (b)(8) 34 3.1.20 Duplex connections, FCC 15.323 (c)(10); RSS-213 4.3.4 (b)(10) 35 3.1.21 Alternative monitoring interval for co-located devices, FCC 15.323 (c)(11); 37 RSS-213 4.3.4 (b)(11) 3.1.22 Fair access to spectrum related to (c)(10) and (c)(11), FCC 15.323 (c)(12); 37 RSS-213 4.3.4 (b)(12) 3.1.23 Spurious emission, radiated Emissions inside and outside the sub-band, FCC 15.323 (d); RSS-213 6.7 38 3.1.24 Frame period, FCC 323 (e); RSS-213 4.3.(c). 44 3.1.25 Frequency stability, FCC 323 (f); RSS-213 6.8 46 3.1.26 Receiver spurious emissions; RSS-213 6.8 47 Annex A Pictures 48 Annex B AC Power line conducted 54 Annex C Emission bandwidth 55 Annex D Peak Transmit Power 69 Annex E Power spectral density 81 Annex F Monitoring threshold 85 Annex G Monitoring of intended transmit window and maximum reaction time 90 Annex H Monitoring bandwidth 92 Annex I Connection acknowledgement 96 Annex J Selected channel 99 Annex K Spurious emissions; Emissions inside and outside the sub-band 100 Annex L Receiver Spurious emissions 171 Revision History 180 Test Report No.: G0M21007-3464-C-1_rev01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany 1.2 Testing laboratory 1.2.1 Location EUROFINS PRODUCT SERVICE GMBH Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 66 1.2.2 Details of accreditation status DAR ACCREDITED TESTING LABORATORY DAR-R EGISTRATION NUMBER: DAT-P-268/08 R ECOGNIZED NOTIFIED BODY EMC R EGISTRATION NUMBER: BNetzA-bS EMV-07/61 R ECOGNIZED NOTIFIED BODY R&TTE R EGISTRATION NUMBER: BNetzA-bS-02/51-53 FCC FILED TEST LABORATORY R EG.-NO. 96970 A2LA ACCREDITED TESTING LABORATORY C ERTIFICATE NO. 1983.01 B LUETOOTH QUALIFICATION TEST FACILITY (BQTF) A CCREDITED BY BLUETOOTH QUALIFICATION REVIEW BOARD I NDUSTRY CANADA FILED TEST LABORATORY R EG. NO. IC 3470 1.3 Details of approval holder Name : NEC Unified Solutions Nederland B.V. Street : Anton Philipsweg 1 Town : 1223 KZ Hilversum Country : Netherlands Telephone : +31 35 689 1137 Contact : Mr. Federico Dosil Telephone : +31 35 689 1137 E-mail : [email protected] Test Report No.: G0M21007-3464-C-1_rev01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany 1.4 Application details Date of receipt of application : 29.07.2010 Date of receipt of test item : 29.07.2010 Date of test : 29.07.2010 - 30.07.2010 1.5 Test item Description of test item : Isochronous UPCS device, cordless phone based on DECT modified technology. Function Portable part Base station Repeater Description of test item : IP-DECT access point Type identification : AP300E Serial number : SO06400122 Photos : See annex Technical data Frequency bands : 1920 – 1930 MHz Operating Channel numbers Test Frequencies Channel center frequency (MHz) 4 F L 1921.536 3 1923.264 2 F M *) 1924.992 1 1926.720 0 F H 1928.448 *) for frequency stability test and spurious emission test in RX mode only Number of channels : 60 (in time and spectrum window, declared by manufacturer) Operating modes : MC/TDMA/TDD Type of modulation : GFSK Test Report No.: G0M21007-3464-C-1_rev01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Max. slot type: single slot double slot Fixed point-to-point operation: Yes/No Antenna Type Gain [dBi] internal external 1 DECT directional antenna SIM-CC-DECTKIT 8dBi Antenna diversity : Antenna Diversity supported Tx Rx 1 Host device : none Classification : related to radio frequency radiation exposure Fixed Device Mobile Device (Human Body distance > 20cm) P…

Text truncated - open the document above for the full version.

Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Test Setup radiated measurments Page 52 of 179 Test set-up Photos FCC ID: UTCAP300E-001 IC ID: 140Q-AP300E01 Test Report No.: G0M21007-3464-C-1 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Test Setup conducted measurement (AC power line) Page 53 of 179