UTCB706D-001B706D Dual Band Basestation

Date: 2007-03-14 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize ETS Product Service AG to act in accordance with our instructions and on our behalf in all matters relating to applications for equipment authorization of our equipment B706D Dual Band including the signing of all documents relating to these matters. Any and all associated acts carried out by ETS Product Service AG shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature Name : R. Maas Title : Advisor Regulatory Compliance Company : NEC Philips Unified Solutions Nederland B.V.

Federal Communications Commission Date: 2007-04-16 Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality NEC Philips Unified Solutions Nederland B.V. FCC ID: UTCB706D-001 FCC Part 15 Certification Gentlemen, In accordance with 0.459 of CFR 47, NEC Philips Unified Solutions Nederland B.V. hereby request infinite confidentiality of the following files and contents for the subject application: - Schematic diagrams and part list File : B706D-Schem and B706D-PartLst - Operational description document File : B706D-OpDes - Block diagram File : B706D-BlkDia - Installation manual File : B706D-UserMan These documents contain detailed system and equipment descriptions and related information about the product which NEC Philips Unified Solutions Nederland B.V. considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Infinite confidentiality is also requested for the listed installation manual, because it contains information which should only be available to qualified and trained personnel. Since the design of this product is a basis from which future technological products will evolve, NEC Philips Unified Solutions Nederland B.V. considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Signature: Sincerely, Name: R. Maas Title: Advisor regulatory compliance Company: NEC Philips Unified Solutions Nederland B.V.

ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 1 of 10 Appendix A. Pictures ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 2 of 10 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 3 of 10

Label location information B706D (Back view of product) 1 B706D printed circuit board assembly (internal) 2 Back side cover of product 3 Front side cover of product A Label with FCC ID and detailed manufacturer information B Label with statement according Part 15.19(a).(3)  NEC - Philips Unified Solutions B.V. All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. A B

2007-04-16 Product Labels B706D Dual Band 110– 001 / 1 of 2 010 A4 Check Date : 16-04-2007 NEC - Philips Unified Solutions B.V. Hilversum  NEC - Philips Unified Solutions B.V. All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. Material: Silver polyester, t/c glossy, permanent sticky Note: Only use CSA/UL recognized material and ink for this label. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. A B 30-60Vdc 50mA max B706D Dual Band Made in Spain Type number: 9600 039 01001 Serial number: SOxxxxxxxx Datecode:<yymmdd> (60mm) Business Mobility DECT 233349 FCC ID: UTCB706D-001 IC: 140Q-B706D01 NEC PHILIPS UNIFIED SOLUTIONS (30mm) (30mm) 2007-04-16 Product Labels B706D Dual Band 110– 001 / 2 of 2 010 A4 Check Date : 16-04-2007 NEC - Philips Unified Solutions B.V. Hilversum  NEC - Philips Unified Solutions B.V. All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. Label location information B706D (Back view of product) 1 B706D printed circuit board assembly (internal) 2 Back side cover of product 3 Front side cover of product A Label with IC ID and detailed manufacturer information B Label with statement according Part 15.19(a).(3) A B

ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 4 of 10 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 5 of 10 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 6 of 10

ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 30 of 53 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-102 UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091, 2.1093 and RSS-102, as appropriate. All equipment shall be considered to operate in a “general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, if applicable. Consideration of radio frequency radiation exposure for EUT is done as SAR test acc. IEEE 1528 MPE calculation as below SAR test results: not applicable MPE calculation: Please find radiated power test results in Appendix J. The EUT is considered as a mobile device according to OET Bulletin 65, Edition – 97 – 01. Therefore distance to human body of min. 20 cm is determined. The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A safety statement concerning minimum separation distances from enclosure of the device will be integrated in the user’s manual to provide end-users with transmitter operating conditions for satisfying RFE exposure compliance. Formula: S = EIRP / 4πR 2 Calculation: EIRP Radiated Power [dBm] 21.79 EIRP Radiated Power [mW] 151.008 R Distance [cm] 20 S Power Density [mW/cm 2 ] 0.030 Limit: The limit of Power density for General Population / Uncontrolled Exposure is 1.0 mW/cm 2 . Compliance with the requirements will be considered by calculation of power density derived from radiated power value. Verdict: Pass Fail For radiated power test results see Appendix I.

ETS PRODUCT SERVICE AG TEST - REPORT FCC PART 15 D for Isochronous UPCS devices RSS-213 for LE-PCS devices FCC ID: UTCB706D-001 IC: 140Q-B706D01 Test report no.: G0M20703-1243-C-1 Certificate #1983.01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 660 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 1 of 53 TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 TECHNICAL TEST 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Examinations and Test Procedures 3 RESULTS OF EXAMINATIONS AND TESTS 3.1. Examinations and Test Procedures 3.1.1 Coordination with fixed microwave service, FCC 15.307 (b) 3.1.2 Reference to Subpart B, FCC 15.309 (b) 3.1.3 Conducted limits AC Power line, FCC 15.315, 15.207; RSS-213 4.2; 6.3 3.1.4 Antenna requirement, FCC 15.317, 15.203 3.1.5 Modulation techniques, FCC 15.319 (b); RSS-213 6.1 3.1.6 Emission bandwidth, FCC 15.323 (a); FCC 15.31 (e); RSS-213 6.4 3.1.7 Peak Transmit Power, FCC 15.319 (c); RSS-213 4.3.1, 6:5 3.1.8 Power spectral density, FCC 15.319 (d); RSS-213 4.3.1, 6:6 3.1.9 Directional gain of the antenna, FCC 15.319 (e); RSS-213 4.1 (e) 3.1.10 Automatic discontinuation of transmission, FCC 15.319 (f); RSS-213 4.3.4 (a) ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 2 of 53 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-Gen 5.5 3.1.12 Monitoring threshold; Least interfered channel; FCC 15.323 (c)(2); (c)(5) (c)(9); RSS-213 4.3.4 (b)(2) 3.1.13 Monitoring of intended transmit window and maximum reaction time, FCC 15.323 (c)(1); RSS-213 4.3.4 (b)(1) 3.1.14 Monitoring bandwidth, FCC 15.323 (c)(7); RSS-213 4.3.4 (b)(7) 3.1.15 Random waiting interval, FCC 15.323 (c)(6); RSS-213 4.3.4 (b)(6) 3.1.16 Duration of transmission, FCC 15.323 (c)(3); RSS-213 4.3.4 (b)(3) 3.1.17 Connection acknowledgement, Unacknowledged transmissions, FCC 15.323 (c)(4); RSS-213 4.3.4 (b)(5) 3.1.18 Selected channel confirmation, Segment occupancy; FCC 15.323 (c)(5) 3.1.19 Monitoring antenna, FCC 15.323 (c)(8); RSS-213 4.3.4 (b)(8) 3.1.20 Duplex connections, FCC 15.323 (c)(10); RSS-213 4.3.4 (b)(10) 3.1.21 Alternative monitoring interval for co-located devices, FCC 15.323 (c)(11); RSS-213 4.3.4 (b)(11) 3.1.22 Fair access to spectrum related to (c)(10) and (c)(11), FCC 15.323 (c)(12); RSS-213 4.3.4 (b)(12) 3.1.23 Emissions inside and outside the sub-band, FCC 15.323 (d); RSS-213 6.7 3.1.24 Frame period, FCC 323 (e); RSS-213 4.3.(c). 3.1.25 Frequency stability, FCC 323 (f); RSS-213 6.8 3.1.26 Receiver spurious emissions; RSS-213 6.8 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 3 of 53 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interoperate with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Specific Conditions: Usage of the hereunder tested device in combination with other integrated or external antennas requires at least additional output power measurements, spurious emission measurements, conducted emission measurements (AC supply lines) and radio frequency exposure evaluations for each individual configuration are performed, for certification by competent authorities FCC; IC. This report is related to FCC Part 15 D applied to UPCS devices of which technology is derived from DECT standard. Additional this report covers the requirement of RSS-213, 2 GHz Licence exempt Personal Communications Services Devices (LE-PCS) released by Industry Canada (IC). In following the term UPCS covers the term LE-PCS too. Tester: 07.05.2007 W. Treffke Date ETS-Lab. Name Signature Technical responsibility for area of testing: 07.05.2007 N. Kaspar Date ETS Name Signature ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 4 of 53 1.2 Testing laboratory 1.2.1 Location ETS PRODUCT SERVICE AG Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 66 1.2.2 Details of accreditation status A CCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-201/96 ACCREDITED COMPETENT BODY BNetzA- REGISTRATION NUMBER: BNetzA-zS-026/96 FCC FILED TEST LABORATORY REG. NO. 96970 Bluetooth Qualification Test Facility (BQTF) Accredited by Bluetooth Qualification Review Board (BQRF) I NDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED Certificate Number: #1983.01 1.3 Details of approval holder Name : NEC Philips Unified Solutions Nederlands B.V. Street : Anton Philipsweg 1 Town : 1223 KZ Hilversum Country : Netherlands Telephone : +31 35 689 2132 Fax : +31 35 689 1528 Contact : Mr. René Maas Telephone : +31 35 689 2132 E-mail : [email protected] ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 5 of 53 1.4 Application details Date of receipt of application : 26.03.2007 Date of receipt of test item : 26.03.2007 Date of test : 27.03.2007 – 28.03.2007 1.5 Test item Description of test item : Isoc…

Text truncated - open the document above for the full version.

ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 7 of 10 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 8 of 10 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 9 of 10 ETS Product Service AG Registration number: G0M20703-1243-C-1 Page 10 of 10