UU8-MFC11Lexibook Pocket Master - 4.3

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body

Vicky Yuan

1 Photographs - EUT Constructional Details Test model No.: MFC144

Date: 17 Jul 2014 MFC144EN_08 Product Size : 159.9(W)x 99.4(H) x 13.3(D) mm Speaker Tempo print Tempo print Side viewBack viewFront viewSide view Design code: 194 IC: 6845A-MFC144 ©2014 Lexibook Limited Model/Modèle: MFC144 Batterie/Battery: 3.7V � 1000mAh Batterie Lithium Polymère/Lithium Polymer Battery AVERTISSEMENT: A pleine puissance, l'écoute prolongée du produit peut endommager l'oreille de l'utilisateur. WARNING: prolonged use at full power of this product might damage the ear of the user. Fabriqué en Chine, Shenzhen Made in China, Shenzhen Lexibook America, Inc c/o Pramex International 1251 Avenue of the Americas, 3rd Floor, New York, NY 10020, USA FCC ID: UU8-MFC11 S/N:Input: 5V � 1500mA White Pantone Process Black C Pantone cool grey 5C **

Date: 17 Jul 2014 MFC144EN_08 Product Size : 159.9(W)x 99.4(H) x 13.3(D) mm Speaker Tempo print Tempo print Side viewBack viewFront viewSide view Design code: 194 IC: 6845A-MFC144 ©2014 Lexibook Limited Model/Modèle: MFC143 Batterie/Battery: 3.7V � 1000mAh Batterie Lithium Polymère/Lithium Polymer Battery AVERTISSEMENT: A pleine puissance, l'écoute prolongée du produit peut endommager l'oreille de l'utilisateur. WARNING: prolonged use at full power of this product might damage the ear of the user. Fabriqué en Chine, Shenzhen Made in China, Shenzhen Lexibook America, Inc c/o Pramex International 1251 Avenue of the Americas, 3rd Floor, New York, NY 10020, USA FCC ID: UU8-MFC11 S/N:Input: 5V � 1500mA White Pantone Process Black C Pantone cool grey 5C **

1 Photographs - EUT Constructional Details Test model No.: MFC144

Lexibook America Tune up procedure The output power setting of EUT is set in the factory and followed the max average level in below. There is no tune up procedure except factory default setting. 802.11b: 14dBm +/-1 dB 802.11g: 12dBm +/-1 dB 802.11n (HT20): 12dBm +/-1dB 802.11n (HT40): 12dBm +/-1 dB By: __Emmanuel Le Cottier (Signature 1 ) (Print name) Title: Managing Director On behalf of: Lexibook America/ Lexibook limited (Company Name) Telephone: 212 583 4920

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140300130802 Page : 1 of 35 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 COVER PAGE FCC SAR TEST REPORT Application No.: SZEM1403001308RF Applicant: Lexibook America Manufacturer: Jungletac Interactive Co., Ltd. Factory: Jungletac Interactive Co., Ltd. Product Name: Lexibook Pocket Master – 4.3” Model No.(EUT): MFC144 Add Model No.: MFC143 FCC ID: UU8-MFC11 Standards: IEEE Std C95(1991) IEEE1528(2003) Date of Receipt: 2014-04-25 Date of Test: 2014-04-26 to 2014-04-26 Date of Issue: 2014-07-31 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140300130802 Page: 2 of 35 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-07-31 Original Authorized for issue by: Tested By 2014-04-26 (Owen Zhou) /Project Engineer Date Prepared By 2014-07-31 (Sade Luo) /Clerk Date Checked By 2014-08-12 (Evan Mi) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140300130802 Page: 3 of 35 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Frequency Band Test positi on Test Ch. /Freq. Max average SAR1- g(W/kg) Conduct ed power (dBm) Tune up L…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140300130801 Page: 1 of 118 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No.: SZEM1403001308RF Applicant: Lexibook America Manufacturer: Jungletac Interactive Co., Ltd. Factory: Jungletac Interactive Co., Ltd. Product Name: Lexibook Pocket Master – 4.3” Model No.(EUT): MFC144 Add Model No.: MFC143 FCC ID: UU8-MFC11 Standards: 47 CFR Part 15, Subpart C (2013) Date of Receipt: 2014-04-23 Date of Test: 2014-04-24 to 2014-05-20 Date of Issue: 2014-07-31 Test Result: PASS * . * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140300130801 Page: 2 of 118 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-07-31 Original Authorized for issue by: Tested By 2014-05-20 (Owen Zhou) /Project Engineer Date Prepared By 2014-07-31 (Linlin Lv) /Clerk Date Checked By 2014-08-12 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140300130801 Page: 3 of 118 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2009 PASS AC Power…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: MFC144 1.1 Radiated Spurious Emission 1.2 Conducted Emission