UZ7BT000444MC33 BLE Battery

MC3300ax Mobile Computer MN-004195-01EN Rev. A Quick Start Guide 2 ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to: SOFTWARE: zebra.com/linkoslegal COPYRIGHTS: zebra.com/copyright WARRANTY: zebra.com/warranty END USER LICENSE AGREEMENT: zebra.com/eula Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Publication Date June 8, 2021 MC3300ax Mobile Computer Quick Start Guide 3 Configurations MC3300ax used in this guide refers to all configurations, except where noted. MC3300ax-G refers to the Trigger configuration. MC3300ax-S refers to the Straight configuration. MC3300ax-G Features Front View Figure 1 MC3300ax-G Front View NOTE: The MC3300ax-G does not ship with a pre-installed hand strap. However, one can be purchased separately as a standalone accessory (SG-MC33-HDSTPG-01) if required.         NumberItemFunction 1DisplayDisplays all information needed to operate the device. 2Scan buttonInitiates data capture when a scan application is enabled. 3KeypadUse to enter data and navigate on screen functions. 4Power keyPress to suspend and resume device. Provides the following options: Power off - Turn off the device. Restart - Reboot the device when software stops responding. 5MicrophoneUse for communications in Handset mode. 6Battery release latchRelease the battery from the device. 7TriggerInitiates data capture when a scan application is enabled. 8Charge /Application notification LED or scan/decode status Indicates the battery charge state while charging, an application notification was received, or the scan/decode status. MC3300ax Mobile Computer Quick Start Guide 4 Back View Figure 2 MC3300ax-G Back View      NumberItemFunction 9NFC antennaProvides communication with other NFC-enabled devices. 10Scanner exit windowProvides data capture using integrated scanner/imager option. 11SpeakerProvides audio output for video and music playback. 12Battery release latchRelease the battery from the device. 13BatteryProvides power for operating the device. MC3300ax Mobile Computer Quick Start Guide 5 MC3300ax-S Features Front View Figure 3 MC3300ax-S Front View         NumberItemFunction 1DisplayDisplays all information needed to operate the device. 2Charge /Application notification LED or scan/decode status Indicates the battery charge state while charging, an application notification was received, or the scan/decode status. 3Side Key scan buttonInitiates data capture when a scan application is enabled. 4Battery release latchRelease the battery from the device. 5Power keyPress to suspend and resume device. Provides the following options: Power off - Turn off the device. Restart - Reboot the device when software stops responding. 6MicrophoneUse for communications in Handset mode. 7KeypadUse to enter data and navigate on screen functions. 8Scan buttonInitiates data capture when a scan application is enabled. MC3300ax Mobile Computer Quick Start Guide 6 Back View Figure 4 MC3300ax-S Back View Setup To start using the device for the first time: • Install a microSD card (optional) • Install the battery • Charge the device • Power on the device.         NumberItemFunction 9BatteryProvides power for operating the device. 10Camera/FlashProvides image capture capability with LED illumination. 11NFC antennaProvides communication with other NFC-enabled devices. 12Scanner exit windowProvides data capture using the scanner. 13SpeakerProvides audio output for video and music playback. 14Side key scan buttonInitiates data capture when a scan application is enabled. 15Battery release latchRelease the battery from the device. 16Hand strapUse for securely holding the device. Comes pre-installed on every MC3300ax-S device. MC3300ax Mobile Computer Quick Start Guide 7 Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentatio…

Text truncated - open the document above for the full version.

MC33 Rechargeable Li-Ion Battery with BLE Beacon Regulatory Guide Warranty For the complete Zebra hardware product warranty statement, go to: zebra.com/warranty . Service Information Before you use the unit, it must be configured to operate in your facility's network and run your applications. If you have a problem running your unit or using your equipment, contact your facility's Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com/support . For the latest version of the guide go to: zebra.com/support . Additional Information For information on using the MC33 BLE Battery, please go to zebra.com/support . ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corp. and/or its affiliates. All rights reserved. Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA www.zebra.com MN-004193-01EN-P — 06/21 Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: BT-000444 All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / Tradução do idioma local / Übersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語の翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地語言翻譯 / 本地 语言翻译 / Yerel dil çeviri /Tłumaczenie na język lokalny : zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Declared maximum operating temperature: 50°C For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs. Bluetooth® Wireless Technology This is an approved Bluetooth® product. For more information on the Bluetooth SIG listing, please visit bluetooth.com . Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc . Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. RF Exposure Guidelines Safety Information Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc . For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility . Batteries and Power Packs This information applies to Zebra-approved batteries and power packs containing batteries. Battery Information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models: •Model BT-000444 (3.6 VDC, 7000 mAh) Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit: zebra.com/batterydocumentation and select the Battery Best Practices link. Battery Safety Guidelines IMPORTANT – SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS WARNING – When using this product basic safety precautions should always be followed, including the following: The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment. •Read all the instructions before using the product. •Follow battery usage, storage, and charging guidelines found in the user's guide. •Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0°C and +40°C (+32°F and +104°F). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries may exhibit unpredictabl…

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Date: June 30, 2021 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7BT000444 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Regulatory Engineering Zebra Technologies Corporation 1 Zebra Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Sincerely, Signature : _______________________________ Name and Job Title. : Larry (Qianlin) Zhou / Regulatory Specialist E-mail : [email protected] Tel. : 346-260-3543

PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 1 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 1. External Photograph of EUT Brand Name: Zebra / Model Name: BT-000444 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 2 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 3 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 4 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 5 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 6 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 7 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 8 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 9 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 720510

Back of the device Label location

PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 10 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 2. Internal Photograph of EUT Brand Name: Zebra / Model Name: BT-000444 720510 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 11 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 12 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 13 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 14 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 15 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 16 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 17 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 18 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 19 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 20 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 21 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 22 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 23 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP132720 TEL : 886-3-327-3456 Page Number : 24 of 24 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2021 Report Version : 01 ─────THE END──── Bluetooth Antenna

SPORTON INTERNATIONAL INC. Page Number : 1 of 4 TEL : 886-3-327-3456 Report Issued Date : Jun. 18, 2021 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA132720 RF Exposure Evaluation Report FCC ID : UZ7BT000444 Equipment : MC33 BLE Battery Brand Name : Zebra Model Name : BT-000444 Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : 47 CFR Part 2.1093 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part 2.1093 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager SPORTON INTERNATIONAL INC. Page Number : 2 of 4 TEL : 886-3-327-3456 Report Issued Date : Jun. 18, 2021 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA132720 Table of Contents 1. General Information ........................................................................................................................... 3 1.1 Description of Device Under Test (DUT) ........................................................................................... 3 2. Maximum RF output power among production units ......................................................................... 3 3. RF Exposure Evaluation .................................................................................................................... 4 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA132720 Rev. 01 Initial issue of report Jun. 18, 2021 SPORTON INTERNATIONAL INC. Page Number : 3 of 4 TEL : 886-3-327-3456 Report Issued Date : Jun. 18, 2021 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA132720 1. General Information 1.1 Description of Device Under Test (DUT) Product Feature & Specification DUT Type MC33 BLE Battery Brand Name Zebra Model Name BT-000444 FCC ID UZ7BT000444 Wireless Technology and Frequency Range Bluetooth: 2402 MHz ~ 2480 MHz Mode Bluetooth LE HW Version EV FW Version v3.10 MFD 06APR21 DUT Stage Identical Prototype 2. Maximum RF output power among production units Band / Mode Average Power (dBm) LE Bluetooth 5 SPORTON INTERNATIONAL INC. Page Number : 4 of 4 TEL : 886-3-327-3456 Report Issued Date : Jun. 18, 2021 FAX : 886-3-328-4978 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA132720 3. RF Exposure Evaluation Bluetooth Max Power (dBm) mW Separation Distance (mm) Frequency (GHz) Exclusion Thresholds 5 3.16 5 2.48 1 Note: 1. Per KDB 447498 D01v06 the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Conclusion: Per KDB 447498 D01v06, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The test exclusion threshold is 1 which is <= 3, SAR testing is not required.

TEL : 886-3-327-0868 Page Number : 1 of 42 FAX : 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 FCC RADIO TEST REPORT FCC ID : UZ7BT000444 Equipment : MC33 BLE Battery Brand Name : Zebra Model Name : BT-000444 Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : FCC Part 15 Subpart C §15.247 The product was received on May 12, 2021 and testing was started from May 18, 2021 and completed on Jun. 03, 2021. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 42 FAX : 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Product Specification of Equipment Under Test ................................................................................ 5 1.3 Modification of EUT ........................................................................................................................... 5 1.4 Testing Location ................................................................................................................................ 6 1.5 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 EUT Operation Test Setup .............................................................................................................. 11 2.5 Measurement Results Explanation Example ................................................................................... 11 3 Test Result ................................................................................................................................................ 12 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 12 3.2 Output Power Measurement ............................................................................................................ 19 3.3 Power Spectral Density Measurement ............................................................................................ 21 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 27 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 33 3.6 AC Conducted Emission Measurement........................................................................................... 37 3.7 Antenna Requirements .................................................................................................................... 39 4 List of Measuring Equipment ................................................................................................................. 40 5 Uncertainty of Evaluation........................................................................................................................ 42 Appendix A. AC Conducted Emission Test Result Appendix B. Radiated Spurious Emission Appendix C. Radiated Spurious Emission Plots Appendix D. Duty Cycle Plots Appendix E. Setup Photographs TEL : 886-3-327-0868 Page Number : 3 of 42 FAX : 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 History of this test report Report No. Version Description Issued Date FR132720 01 Initial issue of report Jun. 18, 2021 TEL : 886-3-327-0868 Page Number : 4 of 42 FAX : 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.1 15.247(a)(2) 6dB Bandwidth Pass - 3.1 2.1049 99% Occupied Bandwidth Reporting only - 3.2 15.247(b)(3) Output Power Pass - 3.3 15.247(e) Power Spectral Density Pass - 3.4 15.247(d) Conducted Band Edges and Spurious Emission Pass - 3.5 15.247(d) Radiated Band Edges and Spurious Emission Pass Under limit 4.20 dB at 2483.520…

Text truncated - open the document above for the full version.

TEL: 886-3-327-0868 Page Number : E1 of E3 FAX: 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 Appendix E. Setup Photographs <Conducted Emission> Remote View TEL: 886-3-327-0868 Page Number : E2 of E3 FAX: 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 Rear View TEL: 886-3-327-0868 Page Number : E3 of E3 FAX: 886-3-327-0855 Issued Date : Jun. 18, 2021 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR132720 <Radiated Emission> Z Plane LF HF ─────THE END─────