Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Date: December 12, 2025 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: UZ7 Zebra Technologies Corporation (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Zebra Technologies Corporation Company US Address: 3 Overlook Point, Lincolnshire, IL, United States, 60069 Contact Person: Jay Cadiz Email: [email protected] Telephone number: 847-616-5806 or 224-532-6912 FRN: 0015642663 Sincerely yours, Signed by the Applicant Signed by the Agent _______________________ ______________________ Dharmajit Solanki [email protected] Jay Cadiz [email protected]
Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 4169706612 phone | www.zebra.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: June 12, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: UZ7DS8208R To whom it may concern, Zebra Technologies Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) Applicant certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, ________________________ Name: Dharmajit Solanki E-mail: [email protected]
Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 4169706612 phone | www.zebra.com Date: June 12, 2026 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7DS8208R AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement or response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Tune Up Procedure Operational Description Block Diagram Schematic Diagram Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Internal Photos External Photos Test Setup Photos Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 4169706612 phone | www.zebra.com User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. ________________________ Dharmajit Solanki [email protected]
Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 4169706612 phone | www.zebra.com Date: June 12, 2026 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7DS8208R AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement or response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Tune Up Procedure Operational Description Block Diagram Schematic Diagram Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Internal Photos External Photos Test Setup Photos Regulatory Engineering Zebra Technologies Corporation 3 Overlook Point, | Lincolnshire, Illinois 60069 | 4169706612 phone | www.zebra.com User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. ________________________ Dharmajit Solanki [email protected]
Sideview of the device Label location
DWG. NO.: Date: 01/30/24 REV Drawn By: C. Franco Approved by: HOLTSVILLE, N.Y. 11742 DRAWING SCALE: 1 / 1 PRINTOUT @ 100% OF ACTUAL SIZE PLEASE NOTE: Do NOT Change Colors, Size or Type Fonts in the Artwork PRINTER NOTE: This proof indicates color break only and may not accurately reflect actual production colors. Die lines and call-outs are for reference only - DO NOT PRINT This title block must remain on the electronic file for all proofs. A ©ZIH CORP. 2005 ALL RIGHTS RESERVED THE INFORMATION CONTAINED HEREIN IS THE CONFIDENTIAL AND THE EXCLUSIVE PROPERTY OF ZIH CORP. THIS DOCUMENT, AND THE INFORMATION CONTAINED HEREIN, SHALL NOT BE COPIED, REPRODUCED, PUBLISHED, DISPLAYED OR DISTRIBUTED, IN WHOLE OR IN PART, IN ANY MEDIUM, BY ANY MEANS, FOR ANY PURPOSE WITHOUT THE EXPRESS WRITTEN CONSENT OF ZIH CORP. DIMENSIONS ARE IN INCHES AR-002256-01 PROD FAM: DS8208R DESCRIPTION: LBL: LCD, ARTWORK DS8208R CTRY CODE: ROW NOTES: 1. SCRIPT FILE TO BE CREATED BY MANUFACTURING PER SP-10083-01 SCRIPT FILE MUST MATCH XXXXXXXA EXACTLY AND HAVE SAME REVISION. 2. LABEL STOCK P/N IS SUBJECT TO CHANGE. CHECK BOM FOR ACTUAL PART NUMBER. 3. ALL CASES "XXX..." REPRESENTS VARIABLE FIELDS IN SCRIPT FILE. 4. SERIAL NUMBER MUST BE 4PT MINIMUM CHARACTER HEIGHT IN SCRIPT FILE. 5. PART NUMBER MAY OR MAY NOT HAVE DASH BEFORE COUNTRY CODE. SEE BOM FOR ACTUAL MODEL DESCRIPTION. 6. "MFD:" REPRESENTS MANUFACTURE DAY, MONTH, YEAR (IE: 12SEP15) 7. COUNTRY OF ORIGIN REQUIRED. 8. PLANT CODE REQUIRED. TO BE LOCATED BY MANUFACTURING FOR BEST FIT IN SCRIPT FILE. 9. LBL STOCK LB-002111-01 10. BMP 600 DPI SIZE 115*23 MM MARKINGS AND DIMENSIONS SHALL REMAIN THE SAME SIZE WHEN PRINTED. S/N: XXXXXXXXXXXX MFD: XXXXXXX MADE IN XXXXXX P/N: XXXXXXXXXXXXX XXXX CCXXxxLPyyyZz X-00000 CMIIT ID: XXXXYYZZZZ ANATEL: HHHHH-AA-FFFFF R-C-XXX-XXXXXXXXXXXX MODEL : DS8208R FCC ID: UZ7DS8208R IC: 109AN-DS8208R 條碼掃描 器 ZEBRA TECHNOLOGIES CORP. LINCOLNSHIRE, IL 60069
TEL : 886-3-327-3456 Page 1 of 20 FAX : 886-3-328-4978 Issued Date : Jun. 15, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA650515 FCC SAR TEST REPORT FCC ID : UZ7DS8208R Equipment : Corded Scanner Brand Name : Zebra Model Name : DS8208R Applicant : Zebra Technologies Corporation 3 Overlook Point, Lincolnshire, IL 60069 USA Manufacturer : Zebra Technologies Corporation 3 Overlook Point, Lincolnshire, IL 60069 USA Standard : FCC 47 CFR Part 2 (2.1093) The product was received on May 07, 2026 and testing was started from May 27, 2026 and completed on May 27, 2026. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 20 FAX : 886-3-328-4978 Issued Date : Jun. 15, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA650515 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Guidance Applied .......................................................................................................................................................... 4 3. Equipment Under Test (EUT) Information ................................................................................................................... 5 3.1 General Information ............................................................................................................................................... 5 4. RF Exposure Limits....................................................................................................................................................... 6 4.1 Uncontrolled Environment ...................................................................................................................................... 6 4.2 Controlled Environment .......................................................................................................................................... 6 5. Specific Absorption Rate (SAR) ................................................................................................................................... 7 5.1 Introduction ............................................................................................................................................................ 7 5.2 SAR Definition ........................................................................................................................................................ 7 6. System Description and Setup .................................................................................................................................... 8 6.1 Test Site Location ................................................................................................................................................... 8 6.2 E-Field Probe ......................................................................................................................................................... 9 6.3 Data Acquisition Electronics (DAE) ........................................................................................................................ 9 6.4 Phantom ................................................................................................................................................................10 6.5 Device Holder........................................................................................................................................................ 11 7. Measurement Procedures ...........................................................................................................................................12 7.1 Spatial Peak SAR Evaluation ................................................................................................................................12 7.2 Power Reference Measurement............................................................................................................................13 7.3 Area Scan .............................................................................................................................................................13 7.4 Zoom Scan ............................................................................................................................................................14 7.5 Volume Scan Procedures ......................................................................................................................................14 7.6 Power Drift Monitoring ...........................................................................................................................................14 8. Test Equipment List .....................................................................................................................................................15 9. System Verification ......................................................................................................................................................16 9.1 Tissue Verification .................................................................................................................................................16 9.2 System Performance Check Results .....................................................................................................................16 10. RFID Output Power (Unit: dBm) ..…
Text truncated - open the document above for the full version.
SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D900V2, serial no. 1D171 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D900V2 – serial no. 1D171 900MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.12.2025 (Cal. Report) -29.824 49.732 -3.209 03.11.2026 (extended) -29.522 1.013 49.488 -0.244 -3.2574 -0.0484 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D900V2, serial no. 1D171 (Data of Measurement : 03.11.2026) 900 MHz - Head
0 dB = 1.12 W/kg = 0.49 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2026/5/27 #01_RFID_Right Side_6mm Communication System: RFID; Frequency: 914.75 MHz Medium: HSL_600-7200_260527 Medium parameters used: f = 915 MHz; σ = 0.949 S/m; ε r = 43.235; ρ = 1000 kg/m 3 Ambient Temperature：23.7 °C; Liquid Temperature：22.7 °C DASY5 Configuration: - Probe: EX3DV4 - SN7306; ConvF(9.2, 8.93, 9.41) @ 914.75 MHz; Calibrated: 2025/7/28 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1794; Calibrated: 2026/2/16 - Phantom: SAM_Left; Type: QD000P40CD; Serial: 1685 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.17 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.202 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.800 W/kg; SAR(10 g) = 0.463 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 11.2 mm Ratio of SAR at M2 to SAR at M1 = 57.5% Maximum value of SAR (measured) = 1.12 W/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2026/5/27 System Check_Head_900MHz DUT: D900V2 - SN1d171 Communication System: CW; Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_600-7200_260527 Medium parameters used: f = 900 MHz; σ = 0.942 S/m; ε r = 43.278; ρ = 1000 kg/m 3 Ambient Temperature：23.7 °C; Liquid Temperature：22.7 °C DASY5 Configuration: - Probe: EX3DV4 - SN7306; ConvF(9.2, 8.93, 9.41) @ 900 MHz; Calibrated: 2025/7/28 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1794; Calibrated: 2026/2/16 - Phantom: SAM_Left; Type: QD000P40CD; Serial: 1685 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7501) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.56 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 64.67 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 3.80 W/kg SAR(1 g) = 2.66 W/kg; SAR(10 g) = 1.73 W/kg (SAR corrected for target medium) Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 67.4% Maximum value of SAR (measured) = 3.42 W/kg 0 dB = 3.42 W/kg = 5.34 dBW/kg
TEL : 886-3-327-3456 Page Number : 1 of 36 FAX : 886-3-328-4978 Issue Date : Jun. 12, 2026 Report Template No.: BU5-FR15CUHF Version 2.1 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR650515 FCC RADIO TEST REPORT FCC ID : UZ7DS8208R Equipment : Corded Scanner Brand Name : Zebra Model Name : DS8208R Applicant : Zebra Technologies Corporation 3 Overlook Point, Lincolnshire, IL 60069 USA Manufacturer : Zebra Technologies Corporation 3 Overlook Point, Lincolnshire, IL 60069 USA Standard : FCC Part 15 Subpart C §15.247 The product was received on May 05, 2026 and testing was started from May 14, 2026 to May 30, 2026. We, Sporton International Inc. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 36 FAX : 886-3-328-4978 Issue Date : Jun. 12, 2026 Report Template No.: BU5-FR15CUHF Version 2.1 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR650515 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Product Specification of Equipment Under Test ................................................................................ 5 1.3 Modification of EUT ........................................................................................................................... 5 1.4 Testing Location ................................................................................................................................ 6 1.5 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency Channel ............................................................................................................... 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ................................................................................................. 9 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 11 3 Test Result ................................................................................................................................................ 12 3.1 Number of Channel Measurement .................................................................................................. 12 3.2 Hopping Channel Separation Measurement ................................................................................... 14 3.3 Dwell Time Measurement ................................................................................................................ 16 3.4 20dB and 99% Bandwidth Measurement ........................................................................................ 18 3.5 Output Power Measurement ............................................................................................................ 21 3.6 Conducted Band Edges Measurement............................................................................................ 23 3.7 Conducted Spurious Emission Measurement ................................................................................. 25 3.8 Radiated Band Edges and Spurious Emission Measurement ........................................................ 27 3.9 AC Power Line Conducted Emissions Measurement ...................................................................... 31 3.10 Antenna Requirements .................................................................................................................... 33 4 List of Measuring Equipment ................................................................................................................. 34 5 Measurement Uncertainty ....................................................................................................................... 36 Appendix A. AC Conducted Emission Test Result Appendix B. Radiated Spurious Emission Appendix C. Radiated Spurious Emission Plots Appendix D. Duty Cycle Plots Appendix E. Setup Photographs TEL : 886-3-327-3456 Page Number : 3 of 36 FAX : 886-3-328-4978 Issue Date : Jun. 12, 2026 Report Template No.: BU5-FR15CUHF Version 2.1 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR650515 History of this test report Report No. Version Description Issue Date FR650515 01 Initial issue of report Jun. 12, 2026 TEL : 886-3-327-3456 Page Number : 4 of 36…
Text truncated - open the document above for the full version.
© 2019 Zebra Technologies Inc. All rights reserved Page 1 of 6 Printed and downloaded copies of this document are considered non-controlled Zebra Technologies Corporation DS8208 900MHz Antenna SPECIFICATION Antenna Manufacturer Name Auden Address No. 19, Lane 772, Heping Rd., Bade District, Taoyuan City 33463, Taiwan (R.O.C) ODM P/N: H-pol. : B13443-40 V-pol. : B13444-40 Reflector : B13445-40 Test DATE 2026.03.02 DATASHEET REVISION 1 Antenna type Yagi-Uda Signature: Test Engineer: Oscar Lu © 2019 Zebra Technologies Inc. All rights reserved Page 2 of 6 Printed and downloaded copies of this document are considered non-controlled Zebra Technologies Corporation Description of Antenna (H-pol. B13443-40) Frequency Range 902MHz to 928MHz Impedance 50ohm Antenna type Yagi-Uda Manufacturing Process Plastic carrier + LDS antenna B13443-40 Antenna Peak Gain: Frequency (MHz) Peak Gain (dBi) Beamwidth 902 -0.6340 90∘ 908 -0.5515 90∘ 915 -0.3963 90∘ 921 -0.4169 90∘ 928 -1.1910 90∘ B13443-40 Antenna Pattern: © 2019 Zebra Technologies Inc. All rights reserved Page 3 of 6 Printed and downloaded copies of this document are considered non-controlled Zebra Technologies Corporation Description of Antenna (V-pol. B13444-40) Frequency Range 902MHz to 928MHz Impedance 50ohm Antenna type Yagi-Uda Manufacturing Process Plastic carrier + FPCB antenna B13444-40 Antenna Peak Gain: Frequency (MHz) Peak Gain (dBi) Beamwidth 902 -0.9840 90∘ 908 -0.6915 90∘ 915 -0.6763 90∘ 921 -0.6369 90∘ 928 -0.6910 90∘ B13444-40 Antenna Pattern:
3 Overlook Point · Lincolnshire, Illinois, 60069 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 902.75 MHz - 927.25 MHz | 157.40 mW |
Cordless Scanner
Equipment Class
DTS - Digital Transmission SystemTouch Computer
Equipment Class
CBE - Citizens Band End User DevicesTouch Computer
Equipment Class
NII - Unlicensed National Information Infrastructure TXTouch Computer
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterEnterprise Tablet
Equipment Class
NII - Unlicensed National Information Infrastructure TX